Carestream Health CR Vita models with OEM IMAGERS

Setup with OEM Imagers for

Manufacturer: Carestream Health

Modality: CR
Model: Vita / Vita LE / Vita SE / Vita XE

Important Note:
Carestream Health CR Vita models could be driven by a workstation:
- equipped with Carestream Health System QC software (sw v3.x),
(see setup here).
- equipped with Carestream Health Image Suite software,
(see setup there).

Important Note:
this manual is also valid for
- Carestream CR POC models 120 / 140 / 260 / 360
- Carestream CR-ITX POC models 550 / 560
- Carestream Dental Systems
- Carestream Examion AQS Veterinary

Author: [email protected], Edition: April 2015. Confidential 1

Carestream Health CR Vita models with OEM IMAGERS

Table of Contents
Connection via DICOM with Carestream Health Laser Imagers:

AGFA DRYSTAR 2000 Imager ........................................................................................................................ 3

AGFA DRYSTAR 3000 Imager ........................................................................................................................ 4
AGFA DRYSTAR 4500 Imager ........................................................................................................................ 5
AGFA DRYSTAR 4500M Imager .................................................................................................................... 5
AGFA DRYSTAR 5300 Imager ........................................................................................................................ 6
AGFA DRYSTAR 5302 Imager ........................................................................................................................ 7
AGFA DRYSTAR 5500 Imager ........................................................................................................................ 8
AGFA DRYSTAR 5503 Imager ........................................................................................................................ 8
AGFA DRYSTAR AXYS Imager ..................................................................................................................... 8
CODONICS HORIZON Imager ........................................................................................................................ 9
FUJI DRYPIX 1000 Imager............................................................................................................................. 11
FUJI DRYPIX 2000 Imager............................................................................................................................. 11
FUJI DRYPIX 3000 Imager............................................................................................................................. 11
FUJI DRYPIX 4000 Laser Imager ................................................................................................................... 12
FUJI DRYPIX 5000 Laser Imager ................................................................................................................... 12
FUJI DRYPIX 7000 Laser Imager ................................................................................................................... 12
FUJI DRYPIX PRIMA Laser Imager .............................................................................................................. 12
FUJI DRYPIX Plus Laser Imager .................................................................................................................... 12
FUJI DRYPIX Smart Laser Imager ................................................................................................................. 12
KONICA DRYPRO 722 Laser Imager ............................................................................................................ 13
KONICA DRYPRO 751 Laser Imager ............................................................................................................ 13
KONICA DRYPRO 752 Laser Imager ............................................................................................................ 13
KONICA DRYPRO 793 Laser Imager ............................................................................................................ 14
KONICA DRYPRO 873 Laser Imager ............................................................................................................ 14
KONICA DRYPRO 832 Laser Imager ............................................................................................................ 14
SONY UP-DF 500 Film Imager ...................................................................................................................... 15
SONY UP-DF 550 Film Imager ...................................................................................................................... 15
SONY UP-DF 750 Film Imager ...................................................................................................................... 15

Author: [email protected], Edition: April 2015. Confidential 2

Carestream Health CR Vita models with OEM IMAGERS
AGFA DRYSTAR 2000 Imager

DICOM

Modality AGFA
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYSTAR
- if not done automatically, select Agfa Drystar 2000 Compatible from printers to install
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 8x10 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Agfa Drystar 2000 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=8x10in, Copy=1, Print Quality=300 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 8x10, click OK

Author: [email protected], Edition: April 2015. Confidential 3

Carestream Health CR Vita models with OEM IMAGERS
AGFA DRYSTAR 3000 Imager

DICOM

Modality AGFA
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYSTAR
- if not done automatically, select Agfa Drystar 3000 Compatible from printers to install
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Agfa Drystar 3000 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=14x17in, Copy=1, Print Quality=315 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 4

Carestream Health CR Vita models with OEM IMAGERS
AGFA DRYSTAR 4500 Imager
AGFA DRYSTAR 4500M Imager
DICOM

Modality AGFA
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYSTAR
- if not done automatically, select Agfa 4500/4500M Compatible from printers to install
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Agfa 4500/4500M and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Adv. set: Size=8x10in, Copy=1, Print Quality=508 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 5

Carestream Health CR Vita models with OEM IMAGERS
AGFA DRYSTAR 5300 Imager

DICOM

AGFA
Modality
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYSTAR
- if not done automatically, select Agfa Drystar 5300 Compatible from printers to install
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Agfa Drystar 5300 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=14x17in, Copy=1, Print Quality=320 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 6

Carestream Health CR Vita models with OEM IMAGERS
AGFA DRYSTAR 5302 Imager

DICOM

Modality AGFA
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYSTAR
- if not done automatically, select Agfa Drystar 5302 Compatible from printers to install
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Agfa Drystar 5302 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=14x17in, Copy=1, Print Quality=320 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 7

Carestream Health CR Vita models with OEM IMAGERS
AGFA DRYSTAR 5500 Imager
AGFA DRYSTAR 5503 Imager
AGFA DRYSTAR AXYS Imager
DICOM

AGFA
Modality
Image

Requirements: Agfa 5500 v6.0, 5503 v6.0, AXYS v1.6

Requirements: QC sw v2.5 SP5 (POC 120/140/260)
Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYSTAR
- if not done automatically, select Agfa Drystar 5500 Compatible from printers to install
- (note: Agfa Drystar 5503, Axys have all same matrixes as Agfa Drystar 5500)
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Agfa Drystar 5500 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Adv. set: Size=14x17in, Copy=1, Print Quality=254 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Replicate, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- (in case for Agfa Drystar 5500 is configured: Print Quality=508 dpi, Magnification=None)
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 8

Carestream Health CR Vita models with OEM IMAGERS
CODONICS HORIZON Imager

DICOM

CODONIC
Modality Imager
S

Requirements: Codonics Horizon Ci, Ci-rad, GS, GS-rad, SF v1.8.8

Requirements: Codonics Horizon XL v1.9.1
Requirements: QC sw v2.5 SP5 (POC 120/140/260)
Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

Note: here below a table which recaps the filmsizes that each Horizon model can handle.
XL model is the only one that can also handle extra-large filmsizes ie 14x51 and 14x36.

Filmsize Film Film Film Paper Paper Paper Paper Paper Paper
14x1 11x1 8x10 Gray Gray Gray Gray Color Color
Model 7 4 14x1 11x1 A A4 A A4
7 4
Ci X X X X X X X
Ci-rad X X X X X X X X X
GS X X X X X
GS-rad X X X X X X X
SF X X X X X
XL X X X X X X X

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=HORIZON
- if not done automatically, select Codonics Horizon Compatible from printers to install
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Codonics Horizon and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
Author: [email protected], Edition: April 2015. Confidential 9
Carestream Health CR Vita models with OEM IMAGERS
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Adv. set: Paper Size=14x17in, Copy=1, Print Quality=319.5 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 10

Carestream Health CR Vita models with OEM IMAGERS
FUJI DRYPIX 1000 Imager
FUJI DRYPIX 2000 Imager
FUJI DRYPIX 3000 Imager

DICOM

FUJI
Modality
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

Note: DryPix 1000 can handle 11x14, 8x10 filmsizes, DryPix 3000 can handle 14x17.
DryPix 2000 can handle all the 3 filmsizes ie 14x17, 11x14, 8x10.

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYPIX
- if not automatically, select Fuji DryPix 1000/3000 Compatible from printers to install
- (note: Fuji DryPix 2000 has all same matrixes as Fuji DryPix 1000, 3000)
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Fuji DryPix 1000/3000 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Adv. set: Size=14x17in (or 8x10), Copy=1, Print Quality=300 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK
Author: [email protected], Edition: April 2015. Confidential 11
Carestream Health CR Vita models with OEM IMAGERS
FUJI DRYPIX 4000 Laser Imager
FUJI DRYPIX 5000 Laser Imager
FUJI DRYPIX 7000 Laser Imager
FUJI DRYPIX PRIMA Laser Imager
FUJI DRYPIX Plus Laser Imager
FUJI DRYPIX Smart Laser Imager
DICOM

Modalit FUJI
Imager
Requirements: QC sw v2.5 SP5 (POC 120/140/260)
Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYPIX
- if not done automatically, select Fuji DryPix 4000 Compatible from printers to install
- (note: Fuji DryPix 5000, 7000, Prima, Plus, Smart have all same matrixes as Fuji DryPix 4000)
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Fuji DryPix 4000 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=14x17in, Copy=1, Print Quality=254 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 12

Carestream Health CR Vita models with OEM IMAGERS
KONICA DRYPRO 722 Laser Imager
KONICA DRYPRO 751 Laser Imager
KONICA DRYPRO 752 Laser Imager

DICOM

KONIC
Modality Imager
A

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

Very Important: the calling AE title of the Modality need to be entered into Konica printer,
in order to be allowed by Konica to print on the Konica printer, therefore ask Konica tech.

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYPRO
- if not done automatically, select Konica DryPro 752 Compatible from printers to install
- (note: Konica DryPro 722, 751 have all same matrixes as Konica DryPro 752)
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Konica DryPro 752 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Size=14x17in, Copy=1, Print Quality=317.5 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK
Author: [email protected], Edition: April 2015. Confidential 13
Carestream Health CR Vita models with OEM IMAGERS
KONICA DRYPRO 793 Laser Imager
KONICA DRYPRO 873 Laser Imager
KONICA DRYPRO 832 Laser Imager
DICOM

KONIC
Modality Imager
A

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

Very Important: the calling AE title of the Modality need to be entered into Konica printer,
in order to be allowed by Konica to print on the Konica printer, therefore ask Konica tech.

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=DRYPRO
- if not done automatically, select Konica DryPro 793 or 832 Compatible from printers to install
- (note: Konica DryPro 873 has all same matrixes as Konica DryPro 793 for CR Mode)
- (note: for Konica DryPro 832 use Konica 793 or Agfa 5302 or Carestream 5800)
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Konica DryPro 793 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=14x17in, Copy=1, Print Quality=580 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 14

Carestream Health CR Vita models with OEM IMAGERS
SONY UP-DF 500 Film Imager
SONY UP-DF 550 Film Imager
SONY UP-DF 750 Film Imager
DICOM

SONY
Modality
Image

Requirements: QC sw v2.5 SP5 (POC 120/140/260)

Requirements: QC sw v3.0 SP10 (POC 120/140/260/360, Vita SE)
Requirements: QC sw v3.1 SP1a (Vita, Vita LE), QC sw 3.2 SP2 (Vita XE)

CR (QC sw v2.5 / v3.x) Setup:

- on Windows desktop press Start button and select Programs
- select Carestream Health (or Eastman Kodak Company)
- select DICOM Printer Driver/Add DICOM Printer Wizard
- note: printer must be turned on and connected to the network before installing it
- click Next, select No, I don’t have a configuration file
- set IP=accordingly, Port=104, AE Title=UPDF
- if not done automatically, select Sony UP-DF500 Compatible from printers to install
- (note: Sony UP-DF550 has similar 14x17 matrix as Sony UP-DF500)
- (note: Sony UP-DF750 has similar 14x17 matrix as UP-DF500 or use Fuji 1000/3000)
- press Continue Anyway in case of stop for Windows Logo testing, click Finish
- It’s very important to set Printing Preferences at Windows level eg 14x17 Film will be kept,
- instead Preferences set at Application level are valid only for that print, and will not be kept.
- To print on different sizes, it’s recommended to issue multiple destinations,
- eg P14x17 and P8x10 ie for each size add a destination.
- Destinations will have same IP and Port, but each one a different AE Title.
- Rename each destination and set correspondently the Printing Preferences at Windows level.
- To set Printing Preferences at Windows level:
- on Windows desktop press Start button and select Settings/Printers and Faxes
- click on Sony UP-DF500 and go into Printer/Printing Preferences
- under Layout set: Orientation=Portrait, Page Order=Front to Back
- under Paper/Quality set: Paper Source=Automatically Select, Media=Blue Film
- under Paper/Quality/Advanced set: Paper Size=14x17in, Copy=1, Print Quality=320 dpi
- under Paper/Quality/Advanced set: Advanced=Enabled,Polarity=Normal, Bin=Tray 1
- under DICOM Config. set: Priority=Medium, Magnification=Cubic, Border=Black
- under DICOM Config. set: Grayscale Pixel Space=Luminance, D.Min=20, D.Max=300
- under DICOM Config. set: Film Illumination=2000, Film Reflected Ambient Light=10
- under DICOM Config. set: Paper Illumination=150, Paper Reflected Ambient Light=0
- click Apply, click OK
- Important: to keep Printing Preferences you need to confirm as below
- click on the created Printer, click on right-mouse-button and select Properties
- under Device Setting tab, confirm Size selection as previously ie 14x17, click OK

Author: [email protected], Edition: April 2015. Confidential 15

Carestream Health CR Vita models with OEM IMAGERS

CARESTREAM, DIGITAL SCIENCE, DRYVIEW, and EKTASCAN are trademarks of Carestream Health.
The Kodak trademark and trade dress are used under license from Kodak.

© Carestream Health, Inc., 2015

Rochester, NY 14608, USA

Author: [email protected], Edition: April 2015. Confidential 16