CUSTOMER

Pre Dispatch Inspection Report

ABB TECHONOLOGY LTD. Report No.:- 01
Supplier :- M/S Wellpro Component Pvt. Ltd., Shiroli, (Kolhapur)
Part Name.: VG-CONTACT SUPPORT Material Specification Supplier Code Challan No. :-

Part No. :- 1 HC0025171 LM 25 Challan Date :-

Drg. Rev. No. :- AN Material Report :- QTY:- NOS

Job No. :- ACTUAL OBSERVATION

Sr. SAMPLE SAMPLE SAMPLE SAMPLE SAMPLE
Parameter Specification Gauge/Method SAMPLE 1 SAMPLE 2 SAMPLE 3 SAMPLE 4 SAMPLE 5
No. 6 7 8 9 10

01 O.D. Ø100 ±0.2 VERNIER

02 O.D. Ø19.9 ±0.05 VERNIER

03 CHAMPER 1.5 X 45° VERNIER

04 RADIUS 0.4 RADIUS GAUGES

05 RADIUS 0.4 RADIUS GAUGES

06 STEP 4±0.1 DEPTH VERNIER

07 STEP 4±0.1 DEPTH VERNIER

08 DIST 125 ±0.5 VERNIER

09 DIST 2 X 17 ±0.2 DHG

10 DIST 19±0.2 DHG

11 DIST 15±0.2 DHG

12 I.D Ø120 ±0.3 VERNIER

13 O.D Ø106 ±0.1 VERNIER

14 DIST 150 SCANNING REPORT

15 DIST 129 ±0.5 VISUALLY

16 RADIUS R1 RADIUS GAUGES

17 RADIUS R2 RADIUS GAUGES

18 DIST 1±0.1 VERNIER

19 I.D Ø118+0.3 VERNIER

20 ANGLE 40° SCANNING REPORT

21 O.D Ø114+0.2 VERNIER

22 DRILL 3 X 120° SCANNING REPORT

23 C.D Ø120 VERNIER

24 DIST 5.9±0.2 VERNIER

25 DIST 4.4±0.2 VERNIER

26 RADIUS R 0.5 RADIUS GAUGES

27 ANGLE 20°±1° SCANNING

28 O.D Ø114.5±0.1 VERNIER

29 O.D Ø113.8-0.2 VERNIER

30 RADIUS R 0.4 RADIUS GAUGES

31 RADIUS R 0.4 RADIUS GAUGES

32 RADIUS 0.8 RADIUS GAUGES

33 ANGLE 45°±1° SCANNING REPORT

34 O.D Ø115±0.5 VERNIER

35 ANGLE 20°±1° SCANNING

36 RADIUS R 0.4 RADIUS GAUGES

37 CHAMPER 0.5 X 45 ° VERNIER

38 DIST 3.5±0.2 SCANNING

39 M 5 DRILL DEPTH 10 +0.2 VERNIER

40 M 5 TAPPING DEPTH 12.7 +1 VERNIER

41 WIDTH 16 + 0.5 VERNIER

42 DIST 8±0.2 VERNIER

43 RADIUS R 1.2 RADIUS GAUGES

44 ANGLE 45 ° SCANNING

45 DIST 0.4 VERNIER

46 O.D Ø111.2 VERNIER

47 I.D Ø5.5±0.2 VERNIER

48 DRILL 3XM5 TPG

49 DEPTH 2(+0.3-0.1) VERNIER

 NOTES

50 CASTING WEIGHT 1.753 Kg WEIGHT MACHINE

51 CONTACT SURFACE SILVERED 15(+7-3) VISUALLY

52 CONTACT SURFACE SILVERED 5(+7-3) VISUALLY

53 NO CLEARENCE HOLE VISUALLY

54 RAW STAINS ALLOWED VISUALLY

55 POSITION OF THREAD HOLES M5 ARE FREE VISUALLY

56 ALL OTHER ARE SILVER PERMISSIBLE VISUALLY

57 GENERAL TOLERANCE DIN ISO 2768-Mk VISUALLY

VG- CONTACT
58 DRAWING NAME VISUALLY
SUPPORT
59 DRAWING NUMBER 1 HC 0025171 VISUALLY

60 DRAWING REVISION NUMBER AN VISUALLY

29
Surface Protection: - Customer GRN. No.: -

Mode Of Packing: - GRN Date :-

Supplier Remarks: -
Customer Remarks :-

Mr. ROHIT DEVKAR Mr. B S MURTI Mr. ROHIT DEVKAR Mr. B S MURTI

Date Inspector In charge Date Inspector In charge

PAGE 04 OF 04
Pre Dispatch Inspection Report
Report No.:- 01

Challan No. :-

Challan Date :-

QTY:- NOS

Customer
Observation
NOTES

Customer GRN. No.: -

GRN Date :-

Customer Remarks :-

Mr. B S MURTI

In charge