DATA SHEET 3-Phase Filters FN3270 / FN3271
Compact EMC/RFI Filter for Industrial Motor Drive Applications
Very compact and light weight design Approvals & Compliances
requiring minimum space
Easy, time-saving installation and contacting
Protective covers as optional accessory
available
Attenuation performance according to EN
61800-3/A11
Features and Benefits
An extremely compact and light weight filter
design requiring minimum mounting space in
installations and cabinets
Simple and time-saving installation with good
accessibility for automatic and hand tools
Performance indicators
Solid, touch-safe terminal blocks, for all filters
from 10 to 100 A, offering sufficient contacting
cross section according to the EN 60204-1
installation standard
Optionally available transparent protective covers
for all filters with busbars from 150 to 1000 A, to
protect the installer, operator or inspector from
accidental touching of live conductors. They can
easily be retrofitted even if the filter is already
installed and connected
These EMC filters provide the attenuation
performance needed to fulfill EN 61800-3/A11
Guaranteed filter performance under fullload
Technical Specifications operating conditions
15 different filter models allow the specific choice
and deployment for most industrial applications
Maximum continuous operating voltage 3x520/300 VAC
Nominal operating voltage 480 VAC +10% possible
Rated currents 10 to 1000 A @ 50°C Typical Applications
Overload capability 4x rated current at switch on, Variable speed electrical power drive systems/
1.5x rated current for 1 minute, once per hour motor drives for mainly industrial purpose
Operating frequency DC to 60 Hz Various industrial applications comprising
High potential test voltage P –> E 2750 VDC for 2 sec frequency inverters, motor drives and servo drives
P –> P 2250 VDC for 2 sec
Temperature range (operation and storage) -25°C to +100°C (25/100/21)
Typical electrical schematic
Protection category IP 20 (10 to 100 A)
IP 00 (150 to 1000 A)
Flammability corresponding to UL 94 V-0
Design corresponding to UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
MTBF (Mil-HB-217F) >320,000 h @ 50°C/480 V
2 3-Phase Filters Schaffner Group DATA SHEET 29. Jan 2025
Filter Selection Table
Leakage current Leakage current
Filter Buy Rated current Typical drive FN3270H / FN3271H FN3270HQ1*** Power loss Input/Output Weight Protective
@ 50°C (40°C) power rating* @ 520 VAC/50 Hz @ 520 VAC/50 Hz @ 25°C/50 Hz connections covers****
[A] [kW] [mA]** [mA]** [W] [kg] Order code
FN3270H-10-44 10 (11) 5.5 3.1 2.4 –44 0.4
FN3270H-20-44 20 (22) 11 3.1 0.4 4.1 –44 0.5
FN3270H-35-33 35 (38) 22 3.4 0.4 6.8 –33 0.7
FN3270H-50-34 50 (55) 30 3.4 0.4 12.8 –34 1.2
FN3270H-65-34 65 (71) 37 3.4 0.4 13.5 –34 1.3
FN3270H-80-35 80 (88) 45 3.4 0.4 13.5 –35 2.2
FN3270H-100-35 100 (110) 55 3.4 0.4 17.1 –35 2.6
FN3270H-150-99 150 (164) 75 6.9 0.9 7.5 –99 6.1 801916
FN3270H-200-99 200 (219) 110 6.9 0.9 13.2 –99 6.1 801916
FN3270H-250-99 250 (274) 132 6.9 0.9 20.6 –99 6.1 801916
FN3270H-320-99 320 (350) 160 6.9 0.9 12.2 –99 7.2 801916
FN3270H-400-99 400 (438) 220 6.9 0.9 19.2 –99 7.2 801916
FN3270H-600-99 600 (657) 315 6.9 35.6 –99 7.7 801916
FN3270H-800-99 800 (876) 400 6.9 51.8 –99 15.8 806275
FN3270H-1000-99 1000 (1095) 560 6.9 81.0 –99 15.8 806275
FN3271H-150-99 150 (164) 75 6.9 7.5 –99 6.1 801916
FN3271H-200-99 200 (219) 110 6.9 13.2 –99 6.1 801916
FN3271H-250-99 250 (274) 132 6.9 20.6 –99 6.1 801916
FN3271H-320-99 320 (350) 160 6.9 12.2 –99 7.2 801916
FN3271H-400-99 400 (438) 220 6.9 19.2 –99 7.2 801916
FN3271H-600-99 600 (657) 315 6.9 35.6 –99 7.7 801916
FN3271H-800-99 800 (876) 400 6.9 51.8 –99 15.8 806275
FN3271H-1000-99 1000 (1095) 560 6.9 81.0 –99 15.8 806275
* Calculated at rated current, 480 VAC and cos phi=0.8. The exact value depends upon the efficiency of the drive, the motor and the entire application.
** Standardized calculated leakage current acc. IEC60939 under normal operating conditions.
*** A low leakage version is available for limited versions. e.g. FN3270HQ1-20-44
**** Please contact your local Schaffner partner to order the optional protective covers with the order code in the table above.
FN3271 typical electrical schematic Versions
FN3270H - standard EMI environments / standard leakage currents
FN3271H - high impedance load EMI environment (> 100 Ohm),
standard leakage currents
FN3270HQ1 - standard EMI environments, low leakage current version
Typical Filter Attenuation FN3270H / FN3271H
Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym
10 and 20 A types 35 to 65 A types 80 and 100 A types 150 to 1000 A types
3 3-Phase Filters Schaffner Group DATA SHEET 29. Jan 2025
Mechanical Data
10 to 100 A types 150 to 1000 A types
B D B P
D I X
J
Z
C V
L L
K H
J C
L
A
H E
G
A
E
U
F
U
G
F
I I
Dimensions
10 A 20 A 35 A 50 A 65 A 80 A 100 A 150 A 200 A 250 A 320 A 400 A 600 A 800 A 1000 A
A 150 150 160 170 170 200 230 300 300 300 300 300 300 370 370
B 58 58 70 85 85 95 95 200 200 200 200 200 200 190 190
C 58 58 68 80 80 90 90 86 86 86 86 86 86 125 125
D 120 120 130 140 140 170 200 240 240 240 240 240 240 310 310
E 132.5 132.5 142.5 152.5 152.5 182.5 212.5 275 275 275 275 275 275 345 345
F 42 42 50 65 65 75 75 165 165 165 165 165 165 155 155
G 4.5 4.5 5.5 5.5 5.5 5.5 5.5 Ø11 Ø11 Ø11 Ø11 Ø11 Ø11 Ø11 Ø11
H 1 1 1 1 1 1.5 1.5 2 2 2 2 2 2 3 3
I 22 22 25 39 39 45 45 40 40 40 40 40 40 50 50
J M4 M4 M5 M6 M6 M8 M8 M10 M10 M10 M10 M10 M10 M12 M12
K 92 92 92 92 92 92 138 138
L 20.5 20.5 20 15 15 16 16 37 37 37 37 37 37 67 67
M 380 380 380 380 380 380 610 610
N 211 211 211 211 211 211 201 201
O 93 93 93 93 93 93 132 132
P 26.5 26.5 26.5 26.5 26.5 26.5 29 29
U 60 60 60 60 60 60 60 60
V 20 20 20 25 25 25 40 40
W 3 3 3 6 6 8 8 8
X 10 10 10 12.5 12.5 12.5 20 20
Y 37 37 37 37 37 37 47 47
Z Ø9 Ø9 Ø9 Ø11 Ø11 Ø11 Ø13.5 Ø13.5
All dimensions in mm; 1 inch = 25.4 mm
Tolerances according: ISO 2768-m/EN 22768-m
Filter Input/Output Connector Cross Sections
-33 -34 -35 -44
Solid wire 16 mm2 35 mm2 50 mm2 10 mm2
Flex wire 10 mm2 25 mm2 50 mm2 6 mm2
AWG type wire AWG 6 AWG 2 AWG 1/0 AWG 8
Recommended torque 1.5-1.8 Nm 4.0-4.5 Nm 7-8 Nm 1.0-1.2 Nm
Please visit www.schaffner.com to find more details on filter connectors.
4 3-Phase Filters Schaffner Group DATA SHEET 29. Jan 2025
Headquarters, Global Sales and Application
Innovation and Centers
Development
Finland Sweden
Switzerland Schaffner Oy Schaffner EMC AB
Schaffner Group Lohjanharjuntie 1109 Östermalmstrorg 1
Industrie Nord 08500 114 42
Nordstrasse 5 Lohja Stockholm
4542 + 358 50 468 72 84 +46 8 5050 2425
Luterbach
[email protected] [email protected] +41 32 681 66 26
France Switzerland
[email protected] Schaffner EMC S.A.S. Schaffner EMV AG
16-20 Rue Louis Rameau Industrie Nord
95875 Nordstrasse 5
Bezons 4542
+33 1 34 34 30 60 Luterbach
[email protected] +41 32 681 66 26
[email protected] Germany
Schaffner Deutschland GmbH India
Ohiostr. 8 Schaffner India Pvt. Ltd
76149 Regus World Trade Centre
Karlsruhe WTC 22nd Floor Unit No 2238 Brigade
+49 721 56910 Gateway Campus 26/1 Dr. Rajkumar Road
[email protected] Malleshwaram (W)
560055
Italy
Bangalore
Schaffner EMC S.r.l.
+91 8067935355
Via Ticino, 30
[email protected] 20900
Monza (MB) United Kingdom
+39 335 120 44 32 Schaffner Ltd.
[email protected] Suite 1 Oakmede Place
Terrace Road
Japan
RG42 4JF
Schaffner EMC K.K.
Binfield
ISM Sangenjaya 7F
+44 118 9770070
1-32-12 Kamiuma Setagaya-ku
[email protected] 154-0011
Tokyo United States
+81 3 5712 3650 Schaffner EMC Inc.
[email protected] 52 Mayfield Avenue
Edison, New Jersey
Singapore
+1 732 225 9533
Schaffner EMC Pte Ltd.
[email protected] Blk 3015A Ubi Road 1 #05-09 Kampong Ubi
Industrial Estate
408705
Singapore
+65 63773283
To find your local partner within
[email protected] Schaffner‘s global network schaffner.com
© 2025 Schaffner Group
The content of this document has been
carefully checked and understood.
However, neither Schaffner nor its
subsidiaries assume any liability
whatsoever for any errors or inaccuracies
of this document and the consequences
thereof. Published specifica-tionsw are
subject to change without notice. Product
suitability for any area of application must
ultimately be determined by the
customer. In all cases, products must
never be operated outside their published
specifications. Schaffner does not
guarantee the availability of all published
products. This disclaimer shall be
governed by substantive Swiss law and
resulting disputes shall be settled by the
courts at the place of business of Schaffner
Holding AG. Latest publications and a
complete disclaimer can be downloa-ded
from the Schaffner website. All trademarks
recognized.
