Model: A06240PA04v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17.5i/2x19.5i/2x19.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Antenna Specifications
Electrical Properties
2 x (690–960) (Lr1/Rr2)
Frequency range (MHz)
690–803 790–862 824–894 880–960
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.3 16.7 17.0 17.2
Gain (dBi)
Over all tilts 16.1±0.6 16.6±0.5 16.9±0.5 17.0±0.6
Side lobe suppression for first side
> 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 72±7 70±6 68±6 65±6
Vertical 3 dB beam width (°) 8.7±0.8 8.0±0.7 7.7±0.6 7.1±0.6
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 22 > 23 > 23 > 23
Cross polar ratio, 0° (dB) > 18 > 18 > 18 > 18
Efficiency (dB) –0.57±0.15 –0.62±0.15 –0.72±0.20 –0.78±0.20
Efficiency average (%) 88 87 85 84
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
Electrical Properties
2 x (1427–2690) (CLy2/CRy3)
Frequency range (MHz)
1427–1518 1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 16.7 18.1 18.7 19.2 19.5
Gain (dBi)
Over all tilts 16.5±0.9 17.9±0.8 18.5±0.6 19.0±0.6 19.3±0.6
Side lobe suppression for first side
> 15 > 15 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 69±9 66±6 63±6 60±6 58±6
Vertical 3 dB beam width (°) 7.5±0.6 6.3±0.6 5.7±0.6 5.1±0.5 4.7±0.4
VSWR < 1.5 < 1.5
Cross polar isolation (dB) ≥ 25 ≥ 26
Interband isolation (dB) ≥ 25 ≥ 26
Front to back ratio, ±30° (dB) > 24 > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 16 > 17 > 17 > 17 > 16
Efficiency (dB) –0.48±0.20 –0.53±0.2 –0.58±0.20 –0.67±0.20 –0.72±0.20
Efficiency average (%) 90 89 88 86 85
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
1
Model: A06240PA04v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17.5i/2x19.5i/2x19.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Electrical Properties
2 x (1695–2690) (Ly1/Ry4)
Frequency range (MHz)
1695–1990 1920–2200 2200–2490 2490–2690
Polarization +45°, –45°
Electrical downtilt (°) 2–12, continuously adjustable, each band separately
At mid tilt 18.0 18.6 19.1 19.4
Gain (dBi)
Over all tilts 17.9±0.8 18.5±0.6 19.0±0.6 19.3±0.6
Side lobe suppression for first side
> 16 > 16 > 16 > 15
lobe above main beam (dB)
Horizontal 3 dB beam width (°) 67±6 64±6 61±5 58±4
Vertical 3 dB beam width (°) 6.3±0.6 5.7±0.6 5.1±0.5 4.7±0.4
VSWR < 1.5
Cross polar isolation (dB) ≥ 26
Interband isolation (dB) ≥ 26
Front to back ratio, ±30° (dB) > 25 > 25 > 25 > 25
Cross polar ratio, 0° (dB) > 17 > 17 > 17 > 16
Efficiency (dB) –0.53±0.2 –0.58±0.20 –0.67±0.20 –0.72±0.20
Efficiency average (%) 89 88 86 85
Max. effective power per port (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ –153 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC grounding
* Max. effective power whole antenna: 1400 W (at 50℃ ambient temperature)
68
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2550 x 469 x 229
(581)
Packing dimensions (H x W x D) (mm) 2815 x 560 x 275
Antenna weight (kg) 44.7
Antenna packing weight (kg) 62.5 (Including clamps)
Radome material GFRPP*
Radome colour Light grey
2550
1910
Operational temperature (℃) –40 to +65
Connector 12 x 4.3-10 Female
Connector position Bottom
Frontal: 669 (at 150 km/h)
Wind load (N) Lateral: 393 (at 150 km/h)
Maximum: 1088 (at 150 km/h)
Max. operational wind speed (km/h) 200
59
Survival wind speed (km/h) 250
* GFRPP: Glass Fiber Reinforced Polypropylene Unit: mm
2
Model: A06240PA04v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17.5i/2x19.5i/2x19.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Wind Load Polar Chart @150 km/h (N)
Accessories
Item Model Description Weight Units per antenna
2 clamps,
Clamp kit-H ASMC00025 6.3 kg 1
mast diameter: 50–115 mm
Downtilt kit-H ASMDT0H01 Mechanical downtilt: 0–8° 3.1 kg 1 (Separate packing)
Port and Array Layout
5–6 7–8 9–10 11–12
1–2 3–4
y1 y2 y3 y4
L: Left array C: Center array y: Yellow r1 r2
R: Right array r: Red
Port Array Freq(MHz) RET S/N
1–2 Lr1 690–960 HWxxxx………Lr1
3–4 Rr2 690–960 HWxxxx………Rr2
5–6 Ly1 1695–2690 HWxxxx………Ly1
7–8 CLy2 1427–2690 HWxxxx……CLy2
9–10 CRy3 1427–2690 HWxxxx……CRy3
11–12 Ry4 1695–2690 HWxxxx………Ry4
3
Model: A06240PA04v06
D06X-2x690-960/2x1427-2690/2x1695-2690-6x65-2x17.5i/2x19.5i/2x19.5i-6xM-R
EasyRET 12-Port 2L4H Antenna with 6 Integrated RCUs – 2.6 m
Antenna Information Management Module (AIMM) Specifications
RET Properties
RET type Integrated RET
RET protocols AISG 2.0/3GPP
Input voltage range (V) 10–30 DC
< 0.6 (when the motor does not work, 12 V)
Power consumption (W) < 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130–9
Connectors
Daisy chain in: Male/Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
Not used Not used RS-485B Not used RS-485A DC DC return Not used
Lightning protection (kA) 8 (8/20 μs)
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, ICES-003
Certification: CE, IC, RCM, RoHS, REACH, WEEE
Pattern Sample for Reference
690–960 MHz 1695–2690 MHz 1427–2690 MHz
(Lr1/Rr2) (Ly1/Ry4) (CLy2/CRy3)
NOTE
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet is available in XML format.
3. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
4. Huawei's standard brackets and accessories must be used for any installation.
5. The antenna working environment must meet the requirements specified in the datasheet.
6. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
7. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Issue: 2024-03-30
4
