Datasheet: uni M-OWL M1 40% Open
EN
EN
Plastic Modular Belt
Series uni M-OWL Type 40% Open
Straight Running
Nominal pitch: 12.7 mm (0.50 in)
Contact area: 8%
P
Surface opening: 40%
STANDARD
Backflex radius: 12.5 mm (0.49 in)
T Pin diameter: 4.0 mm (0.16 in)
cti
on L
dire Largest opening: 7.6 x 23 mm
ing
nn (0.30 x 0.91 in)
Ru
Belt material mm in mm in
& color POM-D B W
P 12.7 0.50 T 7.2 0.28
(Nominal)
Pin material
& color PP W L 3.6 0.14 - - -
Non standard material and color: See uni Material and Color Overview.
STRAIGHT RUNNING
Alternative pin materials: Lockpin: PA6.6 B
Permissible tensile force Belt weight Number of wear strips
(Belt material) (Belt material) *Min. No. (Min. No.)
Belt width drive
POM-D POM-D sprocket **Carry **Return
per shaft (pcs) (pcs)
mm in N lbf kg/m lb/ft
203 8.0 914 205 0.9 0.59 2 2 2
254 10.0 1143 257 1.1 0.74 3 2 2
305 12.0 1373 309 1.3 0.89 4 3 2
356 14.0 1602 360 1.5 1.04 4 3 2
PITCH 12.7 MM/0.50 IN
407 16.0 1832 412 1.8 1.18 5 3 2
457 18.0 2057 462 2.0 1.33 5 4 2
508 20.0 2286 514 2.2 1.48 5 4 2
559 22.0 2516 565 2.4 1.63 6 4 2
610 24.0 2745 617 2.6 1.78 7 5 3
660 26.0 2970 668 2.9 1.92 7 5 3
711 28.0 3200 719 3.1 2.07 7 5 3
762 30.0 3429 771 3.3 2.22 8 6 3
Additional standard belt widths are available in steps of 50.7 mm (2.00 in).
1980 78.0 8910 2003 8.6 5.76 20 14 7
Additional standard belt widths are available in steps of 50.7 mm (2.00 in).
2996 118.0 13482 3031 13.0 8.72 30 20 10
General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service.
*Max. Load per Drive Sprocket. Belt material: POM-D with snub roller 1000 N (450 lbf) without snub roller 500 N (281 lbf).
**Max. Spacing between wear strips, Carry: 152.0 mm (6.00 in); Return: 304.0 mm (12.00 in).
= Single Link
Member of Ammega Group.
ammega.com
Datasheet: uni M-OWL M1 40% Open
Sprocket
Single row/Two way
Dimension
Dimension
PA6 LG
Bore size
diameter
diameter
diameter
PA6 N
Overall
Pitch-
Hub-
No. of teeth
B
1.00
1.25
1.50
0.78
0.98
1.57
in
Pilot bore
Machined
Molded
31.75
20.0
25.0
40.0
25.4
38.1
mm
mm in mm in mm in mm in mm in
Z14 61.4 2.42 58.0 2.28 44.9 1.77 24.7 0.97 32.7 1.29
Z17 73.6 2.90 63.1 2.48 58.0 2.28 31.0 1.22 38.8 1.53
Z19 81.8 3.22 78.4 3.09 68.8 2.70 35.1 1.38 42.9 1.69
Z24 102.2 4.02 98.8 3.89 89.3 3.51 45.5 1.79 53.1 2.09
Z36 151.4 5.96 148.0 5.83 134.9 5.31 70.2 2.76 77.6 3.06
Non standard material
Machined sprocket Machined sprocket Molded sprocket and color: See uni Material
B and Color Overview.
Nosebars Min. Dimensions
E mm in
C C 19.0 0.75
D D 5.0 0.20
E 39.3 1.55
Other sprocket sizes are available upon request.
Two-part sprocket are available upon request.
Round bores are always delivered with keyway.
Other bore sizes are available upon request.
uni Retainer Rings: See uni Retainer Ring data sheet.
uni M-OWL M1 40% Open/2022.07.07
Width of tooth = 11.0 mm (0.43 in)
Width of sprocket = 20.0 mm (0.79 in)
Max load per sprocket shown does not take bore size into account.
Please also ensure that sufficient size shaft is chosen for corresponding load.
For correct sprocket position: See uni Assembly Instructions for uni M-OWL.
For more detailed sprocket information. contact Customer Service.
Expert advice and quality solutions Ammeraal Beltech Modular A/S
Fabrication & Service
Endless Woven Belts
Homogeneous Belts
for all your belting needs. Hjulmagervej 21
Engineered Belts
Synthetic Belts
Modular Belts
DK-7100 Vejle
ammeraalbeltech.com
T +45 7572 3100
eptool.online
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect use of the above ammega.com
stated information. This information replaces previous information. All activities performed and services rendered by Ammeraal Beltech are subject
to general terms and conditions of sale and delivery, as applied by its operating companies.
Member of Ammega Group.
