Scribd
Upload
4 views5 pages

P.O. Inicializar Clave Administrador Local

Uploaded by

Sebastian Marcano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
4 views5 pages

P.O. Inicializar Clave Administrador Local

Uploaded by

Sebastian Marcano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

So far in our series we’ve covered how to reset your Windows password with the Ultimate

Boot CD, but if you are a little more technical you might want to simply use the excellent
System Rescue CD, which is based on Linux.

Note that if you are using standard Windows encryption for your files, resetting the
password will permanently disable access to those files. In that case you should crack the
password, which is something we’ll cover in an upcoming article.

If you are an Ubuntu user and forgot your password, we’ve covered how to do that as well,
either the easy way with the grub menu or alternately with the live cd.

Creating the System Rescue CD


Before you can do anything else, you’ll need to download a copy of the System Rescue CD
and burn the ISO image to disc. For this task, I prefer the simple ImgBurn utility, but you
are free to use whatever burning application you prefer instead.

If you are using ImgBurn, click the Write image file to disc button…

ADVERTISEMENT
Click the File button near Source and then pick the ISO file, then click the Burn button near
the bottom. That’s about all there is to it.

Download the System Rescue CD from sysresccd.org

Resetting Your Password


Now that you have your boot CD, you’ll want to boot from it, which will take you to this
very informative prompt, with some basic instructions on how to use the CD.

The first thing we’ll want to do is mount the hard drive, using this command. (Note that
you might not need to use the –o force argument, it’s only really for when the system didn’t
shut down correctly)

ntfs-3g /dev/sda1 /mnt/windows –o force

You can use the df –m command to verify that the drive has been mounted and that it’s the
right drive. Note that it’s mounted on /mnt/windows at this point.
Now you’ll want to change directory into the Windows/System32/config directory inside of
your windows installation. For mine, the full path was something like this, but it might be
different on yours:

cd /mnt/windows/Windows/System32/config

Once you are in that directory, you should see that there is a SAM file, which is where
we’ll want to change the passwords.

ADVERTISEMENT

To change the password we’ll use the chntpw command, and it’s most useful to use the –l
argument first to list out all the usernames in the file.

chntpw –l SAM

Now you can add the –u argument with your username, which will end up being something
like this command, except you’ll want to replace geek with your username:
chntpw –u geek SAM

This will present you with a wizard type screen:

I’m going to assume that you want to set a new password, so just type “2” at the prompt,
add in your password, and remember to use the “y” key when prompted to save.

At this point your password has been changed, so you can issue the reboot command to
restart the computer (should take the disc out of the drive)

And now you should be able to login with the new password:
Note that I tested this technique on both XP, Vista and Windows 7 with good results.

Download ImgBurn from Ninite

You might also like