1. Which irrigation equipment is used to draw water from a source?

a. Sprayer
b. Sprinkler
c. Water pump
d. Water pail
2. What is the main purpose of a pre-operative check on irrigation equipment?
a. To determine the functionality of tools
b. To repair defective equipment
c. To check serviceability
d. All of the above
3. Which tool is commonly used for digging trenches in irrigation installation?
a. Mattock
b. Crowbar
c. Bolo
d. Water pump
4. What is the most water-efficient irrigation system?
a. Sprinkler system
b. Drip irrigation system
c. Flood irrigation
d. Manual watering
5. Which factor causes water loss in irrigation?
a. Absorption
b. Seepage
c. Percolation
d. Evaporation
6. What is the main advantage of a drip irrigation system?
a. It reduces water use by 30-70%
b. It is the cheapest system available
c. It is suitable for all types of crops
d. It requires no maintenance
7. Which irrigation tool is used for cutting PVC pipes efficiently?
a. Mattock
b. Pipe cutter
c. Digging bar
d. Bolo
8. Which of the following is NOT a type of irrigation equipment?
a. Drip and trickle system
b. Solid set irrigation
c. Center pivot system
d. Hand sprayer
9. Why is it important to check irrigation equipment for defects?
a. To prevent accidents and damage
b. To save time and money
c. To ensure efficient water usage
d. All of the above
 10. Which irrigation equipment is commonly used in large-scale farms for uniform water
distribution?
a. Hand sprinkler
b. Linear move system
c. Water pail
d. Mattock

Module 2: Equipment Handling Procedures and Techniques

11. What does SWL stand for in equipment handling?

a. Safe Working Life
b. Safe Waking Life
c. Safe Working Load
d. Safe Weight Limit
12. Which of the following factors must be considered when setting up a crane for lifting?
a. The weight of the load
b. The lift radius
c. The ground stability
d. All of the above
13. What is the purpose of a safe load indicator (SLI) in lifting operations?
a. To measure the height of the crane
b. To prevent overloading
c. To increase lifting speed
d. To balance the load
14. Why is manual handling safety training important?
a. It prevents injuries from lifting heavy objects
b. It speeds up the workflow
c. It helps reduce fuel costs
d. It is required for legal purposes only
15. Which of the following is NOT a safe lifting practice?
a. Keeping the load close to the body
b. Using the correct grip on objects
c. Twisting while lifting heavy objects
d. Bending the knees when lifting
16. What is the correct lifting posture?
a. Bend your back while keeping your knees straight
b. Keep your back straight and use your legs
c. Hold objects away from the body
d. Lift heavy objects above the head
17. Which of the following is a hazard of poor material handling?
a. Reduced crop yield
b. Back injuries
c. Increased fuel costs
d. Improved efficiency
18. What should be done before moving an irrigation pipe?
a. Check for overhead power lines
 b. Store it in a dry place
c. Clean it with disinfectants
d. Disconnect all water sources
19. Which safety device is required for irrigation pumps?
a. Safety valve
b. Air filter
c. Overload protector
d. None of the above
20. What should be done if an irrigation controller frequently blows fuses?
a. Use a higher-rated fuse
b. Identify and fix the cause of the issue
c. Replace the irrigation system
d. Ignore the issue

Module 3: Personal Protective Equipment (PPE)

21. Which of the following PPE is used for protecting the eyes from chemical splashes?
a. Face shield
b. Safety goggles
c. Sunglasses
d. Contact lenses
22. Why is it important to wear protective gloves when handling chemicals?
a. To prevent burns and skin irritation
b. To improve grip on tools
c. To enhance the flexibility of fingers
d. To make handling equipment easier
23. What is the primary function of a welding shield?
a. Protects the user from heat and glare
b. Provides ventilation
c. Keeps the worker warm
d. Enhances visibility
24. Which PPE is recommended for working in wet and slippery areas?
a. Leather shoes
b. Rubber boots
c. Running shoes
d. Sandals
25. What should be done to ensure PPE is effective?
a. Clean and inspect it regularly
b. Share it with coworkers
c. Store it in a moist area
d. Replace it once a year
26. Which PPE protects against hearing damage?
a. Earplugs
b. Face shield
c. Welding mask
d. Gloves
 27. Why should loose clothing be avoided when working with farm machinery?
a. It can get caught in moving parts
b. It absorbs more sweat
c. It is harder to clean
d. It is less comfortable
28. What PPE should be used when working with loud irrigation equipment?
a. Safety goggles
b. Earplugs
c. Gloves
d. Rubber boots
29. What is the main purpose of PPE in agricultural work?
a. To improve appearance
b. To enhance work efficiency
c. To reduce the risk of injuries
d. To meet legal requirements
30. What is the first step in choosing PPE?
a. Checking its color
b. Ensuring proper fit and comfort
c. Wearing multiple layers
d. Selecting the cheapest option

Answer Key
1. c
2. d
3. a
4. b
5. d
6. a
7. b
8. d
9. d
10. b
11. c
12. d
13. b
14. a
15. c
16. b
17. b
18. a
19. c
20. b
21. b
22. a
23. a
24. b
25. a
26. a
27. a
28. b
29. c
30. b

1. What does OHS stand for?

a. Occupational Hazard System
b. Organizational Health Standards
c. Occupational Health and Safety
d. Official Hazardous Solutions
2. Which government agency is responsible for ensuring workplace safety?
a. FDA
b. OSHA
c. WHO
d. DOH
3. Why is wearing personal protective equipment (PPE) important?
a. To look professional
b. To prevent workplace injuries
c. To increase productivity
d. To follow fashion trends
4. Which of the following is an example of a workplace hazard?
a. Clean floors
b. Proper lighting
c. Chemical spills
d. Organized tools
5. Which of the following is NOT an OHS requirement?
a. Use of PPE
b. Regular breaks for workers
c. Ignoring safety hazards
d. Compliance with safety policies
6. What is the main goal of Occupational Health and Safety (OHS)?
a. To reduce workplace stress
b. To promote health and safety in the workplace
c. To increase company profits
d. To eliminate all work tasks
7. Which of the following best describes the role of an employer in OHS?
a. Providing a safe work environment
b. Ignoring employee complaints
c. Allowing workers to take unnecessary risks
d. Limiting access to safety equipment
 8. What should workers do if they notice a safety hazard?
a. Ignore it
b. Report it immediately
c. Wait for an accident to happen
d. Continue working as usual
9. Which of the following is an example of good workplace safety practice?
a. Wearing loose clothing near heavy machinery
b. Using mechanical aids when lifting heavy objects
c. Running in the workplace
d. Ignoring emergency exits
10. What is the purpose of a compliance officer in a company?
a. Supervising safety and legal compliance
b. Assigning extra work to employees
c. Increasing production speed
d. Managing company finances
11. Which of the following safety measures prevents back injuries?
a. Lifting with the legs, not the back
b. Bending over while lifting
c. Carrying heavy objects alone
d. Ignoring proper lifting techniques
12. How does OHS help in irrigation maintenance?
a. By providing proper guidelines to prevent accidents
b. By increasing the speed of irrigation processes
c. By making irrigation work harder
d. By allowing workers to ignore safety precautions
13. What is one way to reduce workplace stress?
a. Taking regular breaks
b. Working continuously without rest
c. Avoiding safety rules
d. Ignoring colleagues
14. Which of the following is a legal responsibility of workers under OHS?
a. Disregarding safety procedures
b. Taking reasonable care of their health and safety
c. Ignoring safety regulations
d. Letting others handle safety concerns

Module 5: Irrigation Requirements and Guidelines

15. What is the purpose of irrigation?

a. To drain excess water from crops
b. To provide water for crops when rainfall is insufficient
c. To remove weeds from the soil
d. To prevent soil erosion
 16. Which method of irrigation is considered the most efficient?
a. Flood irrigation
b. Sprinkler irrigation
c. Drip irrigation
d. Manual watering
17. Which of the following is a common hazard in irrigation systems?
a. Electrical contacts
b. Proper water distribution
c. Clean irrigation pipes
d. Organized farm layout
18. Why is it important to shut off the power before working on an irrigation system?
a. To avoid electrocution
b. To prevent water wastage
c. To increase work speed
d. To check for leaks
19. What should be done before using an irrigation system for fertigation?
a. Check for fuel leaks
b. Make sure chemicals are properly diluted
c. Increase water pressure
d. Remove all filters
20. What is a key benefit of irrigation safety guidelines?
a. Preventing injuries and accidents
b. Increasing water wastage
c. Making the irrigation process slower
d. Eliminating the need for supervision

Answer Key
1. c
2. b
3. b
4. c
5. c
6. b
7. a
8. b
9. b
10. a
11. a
12. a
13. a
14. b
15. b
16. c
17. a
18. a
19. b
20. a