Scribd
Upload
14 views3 pages

Tds - Plastic Quench rp1

Daphne Plastic Quench RP is a water-soluble quenching polymer with excellent rust prevention and cooling control properties, suitable for various quenching methods. It is effective for induction hardening and immersion quenching of carbon and alloy steels, with recommended concentrations for different parts. The product has specific handling guidelines and is expected to pose no adverse health effects when used as directed.

Uploaded by

Nashrul Hakim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views3 pages

Tds - Plastic Quench rp1

Daphne Plastic Quench RP is a water-soluble quenching polymer with excellent rust prevention and cooling control properties, suitable for various quenching methods. It is effective for induction hardening and immersion quenching of carbon and alloy steels, with recommended concentrations for different parts. The product has specific handling guidelines and is expected to pose no adverse health effects when used as directed.

Uploaded by

Nashrul Hakim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DAPHNE

PLASTIC QUENCH RP

(1) Daphne Plastic Quench RP is water soluble quenching polymer composed of


Features & synthetic glycol.
Characteristics (2) Excellent rust preventive property and difficult to rust by contamination of cutting
oil.
(3) Great protective property of quenching crack due to good cooling control
effect under 250 °C
(4) Suitable for induction hardening and immersion quenching, forging quenching.
(5) Good resistance to degradation by rotten in summer because of good anticorrosion
property.

Guideline of Quenching Composition Parts Concentration


concentration method
Rear axle shaft 5～10%

Crank shaft 5～10%


Carbon Steel
Cam shaft 5～10%

Induction Steering rack 10～15%


Hardening
Gear 10～15%
Low alloy steel Rear axle shaft 10～15%

Gear 12～18%

Bolt 7～12%
Carbon steel
Connecting rod 15～20%

Crank shaft 15～20%


Immersion
quenching Shoe 10～15%

Alloy steel Crawler link 15～20%

Knuckle arm 15～20%

Attention
(1) Suitable temperature of solution is from 30 °C to 45 °C. Polymer resin can separate at
temperature above 65 °C.
(2) Refract meter is used to operate concentration of solution. And more accurate operation of
cooling property is possible if you fix the refractive index by measuring kinematic viscosity.
(3) To control uneven cooling, remove the contaminate oil and scale.
(4) If the surface of workpiece become sticky by remained high viscosity polymer, wash by
shower or immersion to (hot) water immersion. And cleaning solution can be recycled as
makeup water.

Package
200L D/M, 20L P/L
Typical properties

Test Item Test Method Unit RP Stock 5％ 10％ 10％ 10％


Solution

Density at 15℃ ASTM D4052 g/cm3 1.069 1.003 1.006 1.010 1.013

Viscosity at 40℃ ASTM D445 mm2/s 127.0 1.005 1.469 2.135 2.958

pH ASTM D1293 - 10.4 9.7 9.9 9.9 9.9


Refractive index
ASTM D1218 - 1.3928 1.3360 1.3387 1.3415 1.3443
@20°C

Cooling curve

Test method： JIS K 2242


Test condition：
Quenching temperature 800°C
Oil temperature 40°C

Concentration
Temperature (°C)

5％
10％
20％

Time (s)
Refractive Index - Concentration diagram

Refractive Index ND20

Concentration (%)

● Based on available information, this product is not expected to produce adverse effects on health when
used for the intended application and the recommendations provided in the Safety Data Sheet (SDS) are
followed.

● SDS is available upon request through your sales contract office, or via the internet.
https://www.idemitsu.com/jp/business/lube/

● Due to continual product research and development, the information contained herein is
subject to change without notification.

You might also like