A55-SP300
Waterproofing
Materials
Dominique Marabe
Arwen Gloria
Florence Rose Bayogo
LIQUID MEMBRANE
WATERPROOFING
Contact Information:
Phone: +65 6419 9161
Address: Bostik Singapore, 1 Science Park Road
The Capricorn #04-01/05,
Singapore Science Park II, Singapore 117528
Distributors:
Eastern Win Enterpises PTE LTD
Ee Sin Paper Products (Pte) Ltd
Boscoseal PUR is a liquid-applied elastomeric
waterproofing membrane modified with bitumen that
dries into a strong, resilient film. It is applicable to
construction both above and below grade.
APPLICATION INSTRUCTION
1. Prime the whole substrate with Bostik bitumen primer at the
rate of 5m2 per liter depend on substrate condition.
2. Stir product to an even smooth consistency before use.
3. Then place, Boscoseal PUR can be appllied by brush, roller,
trowel or squeegee.
SHEET MEMBRANE
WATERPROOFING
601 AVENUE DELMAR
H9R 4A9 POINTE-CLAIRE
QC
TEL.: +1 800-933-7452
SUBSTRATE QUALITY The Sikaplan® WP sheet membrane (PVC)
system for waterproofing basements and other below-ground
structures Sikaplan® WP sheet membrane (PVC) system for
waterproofing tunnels should be consulted for details regarding
substrate quality and pre-treatment.
Only Sika®-approved and/or trained contractors with prior
experience in this kind of application may apply this product.
Always ensure good ventilation when applying the Product in a
confined space. SIKAPLAN® WP 1100-25 HL2
The Product cannot withstand prolonged exposure to bitumen
and certain non-PVC plastics.
CEMENTITIOUS
WATERPROOFING
Contact Information:
Phone: +65 6419 9161
Address: Bostik Singapore, 1 Science Park Road
The Capricorn #04-01/05,
Singapore Science Park II, Singapore 117528
Distributors:
Eastern Win Enterpises PTE LTD
Ee Sin Paper Products (Pte) Ltd
Portland cement is combined with Powermix, a high-grade acrylic
polymer that is specially modified, flexible, and reinforced with fibers
to give concrete surfaces enhanced water protection.
APPLICATION INSTRUCTION
1. Once the primed surface is dry to touch, prepare the
Powermix cementitious mixture (1 gallon Powermix:
4.5 kgs or 3.5 liters Portland cement) and measures an
area of 8sqm.
2. Apply the prepared mixture by brush over the
measure area, to serve as the first coat.
3. Allow the first coat to cure from 1-2 hours, then
prepare a second mixture.
4. Apply the second mixture over the first coat by roller
(applied on the opposite direction).
5. Let dry for 24 hours before flood testing.
6. Concrete topping is recommended for exposed areas
subject to regular traffic (e.g. roof decks, etc.).
BENTONITE WATERPROOFING
MEMBRANE
Contact Information:
Phone: (0917) 821-4321
Telephone: (02) 7794-8795
Address:
Lower Bicutan, Taguig, Metro Manila
Email:
[email protected]
Bentonite Waterproofing with membranes is a widely used
technique in commercial and industrial construction projects. To
stop water leaks or damage, a thin layer of watertight material is
applied over a surface to create a waterproofing membrane.
Waterproofing membranes are available in sheets that are pre-
formed or as liquid applied.
Waterproofing membranes are typically installed around the
foundations of below-grade construction, such as structural slabs
and retaining walls of multi-story buildings and underground
parking lots, to prevent water intrusion.
HOW TO APPLY:
The first layer of waterproofing in CLAY-TITE is provided by the HDPE, and under hydrostatic
conditions, the self-sealing properties of the bentonite ensure puncture protection. The
bentonite on the job site is shielded from direct shotcrete installation by the addition of
polypropylene fabric.
Designed for both vertical and horizontal applications, below-grade use is anticipated. In spite of
a high water head, CLAY-TITE remains strong and resilient. It can be installed on damp or green
surfaces in all weather conditions and self-seals in hydrostatic environments.
Thank You
