PCIE-1805 1MS/s, 16bit, 32-ch Analog Input PCIE
Card
Features
32-ch single-ended or 16-ch differential or a combination of analog input
16-bit A/D converter, with up to 1MHz sampling rate
Auto calibration
Current measurement (0-20mA or 4-20mA)
Support digital and analog triggers
Multi-card synchronization
RoHS
COMPLIANT
2002/95/EC
Introduction
PCIE-1805 is a high-resolution, high-channel-count analog input PCIE card. It provides 32 channels of multiplexed voltage/current measurement, up to 1 MS/s sample rate, 16-bit
resolution analog input with low distortion and noise performance. The card features a variety of input ranges and covers both voltage and current measurement. It can easily be
applied to most of the industrial applications.
Specifications Power Consumption +3.3 V 300 mA typ./320mA max.
+12 V 70mA typ. / 90mA max.
Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Analog Input Storage Temperature -20 ~ 70° C (-4 ~ 158° F)
Channels 32 single-ended, 16 differential, or combination Storage Humidity 5 ~ 95% RH, non-condensing (refer to IEC 68-2-
Resolution 16 bits 3)
Max. Sampling Rate 1MS/s, shared by all enabled channels
Overvoltage Protection
Input Impedance
30 Vp-p
AI+ to AGND (Single Ended): >1000 GΩ in parallel
Ordering Information
with 9 pF PCIE-1805-AE 1MS/s, 16bit, 32-ch Analog Input PCIE Card
AI+ to AI- (Differential): >1000 GΩ in parallel with
6 pF Accessories
Sampling Modes Software and onboard programmable pacer ADAM-3962-AE DB-62 Wiring Terminal, DIN-rail Mount
Input Range ±10 V/±5 V/±2 V/±1 V/0 ~ 20 mA/4 ~ 20 mA PCL-10162-1E DB-62 Shielded Cable, 1m
Offset error < ±0.5 mV (Voltage Mode);
< ±2.5 μA (Current Mode) PCL-10162-3E DB-62 Shielded Cable, 3m
Gain error < ±0.01 % (Voltage Mode); 1700030423-01 10 pin Flat Cable, 10cm
< ±0.05 % (Current Mode)
RMS Noise
Auto calibration
0.1mV
Yes
Pin Assignments
Multi-card synchronization Yes
Trigger & Clock Input
Trigger mode Start, delay to start, stop, delay to stop
Trigger source 2 external digital triggers and 2 analog triggers
from AI channels
Clock input 2 digital trigger inputs, and 1 conversion clock
input
Trigger Input voltage Logic 0: 0.8 V max. (0 V min.)
Logic 1: 2.0 V min. (5 V max.)
Trigger and Clock Output
Channels 2 multi-function outputs
Output capability Logic 0: 0.8 V max. @ 10 mA
Logic 1: 2.0 V min. @ -10 mA
General
Bus Type PCI Express x1
I/O Connector 1 x DB62 female connector
Dimensions (L x H) 168 x 98 mm (6.6" x 3.9")
Data Acquisition Boards
All product specifications are subject to change without notice. Last updated: 12-Mar-2020
