QUICK SETUP GUIDE

Before using the TV, please read this guide thoroughly

and retain it for future reference.

ES-A20520J-1 English
 Important Safety Instructions

▐ Important Notice
Paragraphs beginning with the symbol indicate important instructions, tips or
conditions for the following settings.
For your own safety and the optimal performance of your TV, ensure to
read the safety instructions before performing any installation.
It is not guarantee operation and performance of peripheral devices made by other
manufacturers. We disclaim any liability or damage that may arise from operation and/
or performance from usage of such other maker’s peripheral devices.
The recording and playback of content on this or any other device may require
permission from the owner of the copyright or other such rights in that content. It is
your responsibility to ensure that your use of this or any other device complies with
applicable copyright legislation in your country. Please refer to that legislation for more
information on the relevant laws and regulations involved or contact the owner of the
rights of the content you wish to record or playback.
The Index/Glossary explains certain terms used in this user manual and in the TV menu.
Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.

▌Safety Instructions
To ensure safe and correct use of this product, always comply with the following
precautions to avoid dangerous situations and damage to your unit:
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.
Class II product : This symbol indicates that it does not require a safety connection of
protective earthing (ground).

A
 Important Safety Instructions

The intended use and ambient conditions for this TV

This TV is intended for the rendering of video and audio signals, on a table-top or wall-
mounted, in a home or office environment. It must not be used in rooms with a high
level of humidity or dust concentration. The warranty is only valid if used as intended
by the manufacturer.

WARNING

High humidity and dust concentration may lead to current leaks in the device. To
reduce the risk of fire or electrical shock:
- Do not expose this unit to rain, moisture, dripping or splashing water, and do
not place objects filled with liquids, such as vases, cups, etc. on or over the
unit.
- Do not touch the TV with wet hands.
- Do not expose to direct air-conditioning and keep candles or other naked
flames away from the TV at all times.
If the TV is moved from a cold environment to a hot environment, leave it switched off
for at least an hour to avoid condensation. If used outside, make sure it is protected
from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of fire, use preferably a CO2 gas or powder fire extinguisher. If such extinguishers
are not accessible, try to isolate the electrical supply before using a water fire extinguisher.

WARNING
Never place a television set in an unstable location. A television set may fall,
causing serious personal injury or death. Many injuries, particularly to children, can
be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television
set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting
furniture.
- Not placing the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and television set to a suitable
support.
- Not placing the television set on cloth or other materials that may be located
between the television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the
television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.

B
 Important Safety Instructions

„„ Moving/Transportation „„ Power plug and power cable

Before moving this TV, disconnect all - Do not touch the power plug with wet
cables and move in the vertical position hands.
only. Grasp the device on the upper and - Do not place heavy objects on the
lower edges of the frame. power cable. Route the cable so that it
- Do not press or put stress on the front is not kinked or laid over sharp edges,
panel of the TV. It may take two or walked on or exposed to chemicals. A
more people to carry larger TVs. power cable with damaged insulation
If you have to briefly lay down the TV, can cause electric shock and fire.
place the unit with its entire front surface - Pull the power plug, NOT on the cable
lying flat on soft material. when disconnecting. The cable can
The LED screen is made of glass and can become damaged and cause a short
break if is not handled properly. Always circuit if pulled on.
wear rubber gloves to carry the unit. If - Do not place the power cable near a
the LED screen is damaged, liquid crystal high temperature object.
might leak out. In case of skin contact, - Do not move the TV with the power
immediately rinse thoroughly with water. cable plugged into a socket.
- Do not use a damaged or loose power
„„ Power Supply cable, or a damaged socket outlet.
Incorrect voltages can damage the TV. - Do not use any power cords other
than the one supplied with this unit.
Only connect this unit to a power supply
with the correct voltage and frequency
noted on the type plate, using the „„ Set-up
supplied power cable.
Check that the location is suitable to bear
The power plug must be easily accessible the load of the TV. Place on a level, sturdy
so that the device can be disconnected at and horizontal base. Ensure that the unit
all time. The unit is live, even if in standby does not hang over the edge of the base
mode, as long as the unit is connected to when placed in or on furniture. If placed
a power outlet. on a cart, use caution when moving to
It is recommended that this unit is placed avoid the unit from tipping over.
on a dedicated circuit. - Place the unit in a normal upright
- Do not overload the power outlets by horizontal position. It must never
connect too many appliances to the be operated vertically, lying flat or
same outlet. Overloaded wall outlets, hanging overhead from the ceiling.
extension cords, etc. are dangerous - Place the unit where it is not exposed to
and can result in electric shock and direct sunlight or other sources of heat.
fire.
When mounting the TV on a wall, follow
After power off, don't turn it on again in the instructions supplied with the wall-
5 seconds. Frequent switching power mount, make sure not to install the TV by
supply in a short period of time can cause hanging the power and signal cables on
abnormal TV. the back of the TV.

C
 Important Safety Instructions

„„ Air ventilation and high Prevent small items from getting into the
temperatures interior of the device through the ventilation
slots. Such objects may cause short circuits,
Install your TV only where there is proper which may cause fire.
ventilation, and ensure that there is at least If something should get inside the unit,
10 cm free space on the sides and 20 cm immediately unplug the power plug of the
above the unit for air circulation. Excessive device and contact service support.
heat and obstruction of ventilation could
lead to fire or early failure of some electric
„„ The LED screen
components.
- Do not block any ventilation openings Despite thorough care when manufacturing
with newspapers, tablecloths, curtains, this display, it cannot be 100% guaranteed
etc. that no sub-pixel defects will occur due
- Do not dry clothing etc. on top of the unit. to technical reasons. These cannot be
- Take care not to touch the ventilation considered as a device defect in terms
openings since they may become hot. of the guarantee. They will not affect the
performance and reliability of the TV.
- Do not insert foreign objects into the TV
through the vents. To prevent “image burn”, avoid displaying
still images for long periods of time, there
„„ The Stand is a possibility that a copy of the image
may remain. If the aspect ratio is set to 4:3
- Do not use any stand other than the one for a long period of time, image burn may
supplied with this unit. occur on the black areas. Image burn is not
- Do not modify or use the stand if it covered by the warranty.
becomes warped of physically damaged. - Do not apply strong force or impact on
- During setup, make sure that all the the display panel.
screws are securely tightened. Avoid touching the LED screen or touching
- Ensure that the TV does not suffer any it for long periods of time. Doing so may
impact during the attachment of the produce some temporary distortion effects
stand. on the screen.
- Ensure that children do not climb onto
the stand. „„ Radio waves
- Attach or remove the stand with at least
two people. - Do not use the TV in any medical
institutions or locations with medical
20cm equipment. Radio waves may interfere
with medical equipment and cause
10cm 10cm 10cm malfunction.
- Do not use the TV near any automatic
control equipment such as automatic
doors or fire alarms. Radio waves
may interfere with automatic control
equipment and cause malfunction.

D
 Important Safety Instructions

If you have a cardiac pacemaker, keep a „„ Thunder Storms

distance of at least 22 cm from the TV. Radio
waves may interfere with the operation of a Pull out the power plug and all connected
pacemaker. antenna cables from the TV during a
thunderstorm. Overvoltage caused by
„„ Warning about off-gassing lightning strikes can damage the TV via
the antenna system, as well as the wall
New furniture, carpet, paint, building socket.
materials and electronics can release
chemicals into the air through evaporation. „„ Long periods of absence
After you set your TV up and turn it on for
the first time, you may notice a slight smell As long as the power plug is connected to
within a couple of hours. This is because a live socket outlet, the TV will consume
some components of TV are heating up power even in standby mode. The power
for the first time. The materials that we use plug and all connected antenna cables
fully meet the environmental requirements should be disconnected out during long
and regulations. Your TV is working just periods of absence.
fine and the fumes from the off-gassing
will diminish eventually. „„ Cleaning and care

„„ Supervision CAUTION:
Unplug the power cord prior to cleaning
- Do not let children play unsupervised
the TV.
close to the TV. It could tip over, be
pushed off or pulled down from the Clean the TV, the screen, and the remote
stand surface and injure someone. control with a soft, moist, clean and
color-natural cloth only. Do not use any
- Do not allow a switched-on TV to run
chemicals.
unattended.
- Do not subject the surfaces to insect
repellent, solvent, thinner or other
„„ Volume volatile substances. This may degrade
Loud music and noises can lead to the surface quality.
irreversible damage to your ears. Avoid - Do not spray water or other liquids
extreme volume, especially over long directly on the TV. Liquid inside the TV
periods and when using headphones. could lead to product failure.
If you hear a drumming noise in your ears, - The surface of the display panel is
turn down the volume or temporarily stop treated and may be easily damaged.
using headphones. Take care not to scratch it with
fingernails or other hard objects.
- Also wipe the power plug with a dry
cloth at regular intervals.

E
 Important Safety Instructions

„„ Service/Repair „„ Remote Control batteries

Never remove the cover/back of the TV; - Incorrect installation may cause battery
there are no user serviceable parts inside. leakage, corrosion and explosion.
Refer all service to qualified service - Replace only with the same or
personnel. equivalent type.
- Do not mix old and new batteries.
„„ Packaging - Do not mix different battery types.
Keep the anti-moisture materials and - Do no use rechargeable batteries.
plastic bags out of reach of children. - Do not burn or break up batteries.
Plastic bags can cause suffocation and - Be sure to dispose of batteries
the anti-moisture material is harmful if correctly.
swallowed. If swallowed by mistake, force
- Do not expose batteries to excessive
the patient to vomit and visit the nearest
heat such as sunshine, fire or the like.
hospital.

„„ Modification „„ Outdoor Antenna Grounding

If an outdoor antenna used, be sure the
Do not attempt to modify this product
antenna system is protected against
in any way. Unauthorized modification
voltage surges and built-up static charges.
could void the warranty of this unit, cause
electric shock and fires.
„„ Disposal
Refer to the recycling section of this manual.

F
 Contents

Figures and illustrations in this manual are provided for reference only and
may differ from actual product appearance.
Parts of the software function changes with the system upgrade.
Contents

Accessories List..............................................................................................................1
Installing the Stand or Wall mount bracket......................................................................2
TV Front..........................................................................................................................4
TV Rear...........................................................................................................................5
Making Connections........................................................................................................7
Remote Control...............................................................................................................9
Turning the TV on for the First Time..............................................................................13
Specifications................................................................................................................14
Other Information..........................................................................................................15

Accessories List
The following accessories are included with TV:
Quick Setup Guide× 1 Warranty Card × 1 Base Stand × 2
Remote Control × 1 AAA Battery × 2 Screw × 4
RCA jack to AV Cable × 1

NOTE
The accessories may be different from the list above due to different models, countries /
regions, please refer to the actual accessory bag.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment
type [ 32A5100F / 32A5120F / 32A5140F / 32A5160F / 32AE5000F / 32AE5010F
/ 32AE5030F / 32AE5050F / 40A5100F / 40A5120F / 40A5140F / 40A5160F /
40AE5000F / 40AE5010F / 40AE5030F / 40AE5050F ] is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: http://global.hisense.com/downloads.

1
 Installing the Stand or Wall mount bracket

CAUTION
Be sure to disconnect the A/C power cord before installing a stand or wall mount
brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.

Installing the Stand

Follow the illustrations and textual instructions below to complete the installation steps:
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Remove the Base Stand from the accessory bag and then insert the stands into the
bottom slots of the TV.
3. Secure the Base Stand to the TV with the screws in accessory tightly.

Screws:
Base Stand (ST4 x 14F) x 4 (32")
(ST4 x 20F) x 4 (40")

2
 Installing the Stand or Wall mount bracket

Installing the wall mount bracket

Before mounting the TV, remove the TV stand if you have already attached it, and make
sure the wall mount bracket supports the weight of your TV.

CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.

Place spacers between the TV and bracket. ≤15°

Make sure the tilt angle between the TV screen and the
Vertical
vertical surface is no more than 15 degrees.
surface
TV screen
Standard dimensions are shown below.

Wall mount hole pattern (mm) 100 × 200

Wall mount screw size M6

9.5-11.5 mm
Wall Mount Bracket

Wall Mount Screw

Rear cover of the TV Wall Mount Spacer

NOTES
The diameter and length of the screws differ depending on the wall mount bracket
model.
Wall mount bracket is optional. Your TV may not have wall mount bracket. Please
refer to the actual accessories.

3
 TV Front

TV Front

Standby / Source Remote sensor / Power indicator

Item Description
Receive remote signals from the remote control.
Remote sensor Do not put anything near the sensor, as its function may be
affected.

Power indicator The light is red in standby mode.

Press the button to power on the TV. Press and hold the button
to power off the TV when the focus is on “ ”.
Press the button to move the focus to “ ”, press and hold the
Standby / Source button to select among the different input signal sources.
/

Press the button to move the focus to “+” or “-”, press and hold
the button to adjust the volume.
VOL + / -

Press the button to move the focus to “ ” or “ ”, press and

hold the button to change the channel.
CH /

NOTES
The Picture is Only for Reference.
Powering on the TV requires several seconds to load programs. Do not rapidly
turn the TV off as it may cause the TV work abnormally.

4
 TV Rear

TV Rear
32"

AUDIO OUT
DIGITAL
HEADPHONE
COMMON INTERFACE(CARD FACE FRONT)
Power cord

AV IN
NOTES
ANT2 Jack supports power supply for satellite antenna (13/18V, 400mA

DVB-T/T2/C
max.)

ANT 1
Check the jacks for position and type before making any connections.
Loose connections can result in image or color problems. Make sure
that all connections are tight and secure. 13/18V 400mA

Not all A/V devices have the ability to connect to a TV, please refer to DVB-S/S2
ANT 2

the user’s manual of your A/V device for compatibility and connections
procedure.
Before connecting external equipment, remove the mains plug from the
wall socket. Otherwise, it may cause electric shock.
HDMI 1(ARC)
HDMI 2
DC 5V 0.5A(MAX)
USB

5
 TV Rear

40"

AUDIO OUT
DIGITAL
HEADPHONE
COMMON INTERFACE(CARD FACE FRONT)
Power cord

AV IN
NOTES

DVB-T/T2/C
ANT2 Jack supports power supply for satellite antenna (13/18V, 400mA

ANT 1
max.)
Check the jacks for position and type before making any connections.
Loose connections can result in image or color problems. Make sure
that all connections are tight and secure. 13/18V 400mA

DVB-S/S2
ANT 2
Not all A/V devices have the ability to connect to a TV, please refer to
the user’s manual of your A/V device for compatibility and connections
procedure.
Before connecting external equipment, remove the mains plug from the
HDMI 1(ARC)

wall socket. Otherwise, it may cause electric shock.

HDMI 2
DC 5V 0.5A(MAX)
USB

6
 Making Connections

Outdoor
Antenna

Cable
or ANT OUT
ANT 1
DVB-T/T2/C

(not included) Antenna Cable (75Ω)

VHF/UHF Antenna
ANT

13/18V 400mA
ANT 2
DVB-S/S2 (not included) Satellite antenna

Audio Amplifier/Speaker
DIGITAL DIGITAL
AUDIO OUT
AUDIO OUT DIGITAL AUDIO cable (not included)

Audio Amplifier/Speaker
HDMI
HDMI
(ARC) HDMI (ARC)
HDMI cable (not included)
HDMI
DVD/Blu-Ray/AV receiver/
Set-top Box
HDMI HDMI
HDMI
HDMI cable (not included)

Red(R)
VCR/DVD Player/
(not included) Recorder/Set-top box/
White(L) Satellite Receiver/
AV Video Camera
AV IN (not included) A/V OUT

Yellow(Video) Video L R

(not included)

Headphone (not included)

HEADPHONE

HEADPHONE

NOTE
Excessive sound pressure from earphones and headphones
can cause hearing loss.

7
 Making Connections

COMMON INTERFACE (CARD FACE FRONT)

2 1
CAM CARD SMART CARD

NOTES
Before you insert/remove the CI+ module, ensure that the TV
is switched off. Then insert the CI card into the CI+ module in
COMMON accordance with the Service Provider’s instructions.
INTERFACE Do not repeatedly insert or remove the Common Access
Module as this may damage the interface and cause a
malfunction.
You must obtain a CI+ module and card from the service
provider of the channels you want to watch.
Insert the CI+ module with the SmartCard in the direction
marked on the module and SmartCard.
CI+ is not supported in some countries and regions; check with
your authorized dealer.

USB

DC 5V 0.5A(MAX)

NOTES
When connecting a hard disk or a USB hub, always connect
USB the mains adapter of the connected device to the power
supply. Exceeding a total current consumption may result in
damage. The USB1.1 and USB2.0 devices maximum current
consumption are 500mA.
For individual non-standard high-capacity mobile hard disk, if
its impulse current is greater than or equal 1A, it may cause
TV-rebooting or self-locking. So the TV does not support it.
The USB port supports a voltage of 5V.

8
 Remote Control

1
2
1 Remote sensor window
2 POWER: Switch the TV on or into standby
mode
3
4 6
3 Source: Select input sources
5 7 4 TV/DTV: Enter the TV/DTV source
8
9 10 5 TV/Radio: Enter the TV/Radio source
6 Mute: Mute or restore the TV sound
11 13
7 Zoom: Select the screen aspect ratio
12
14
8 : Start recording
NOTE: The information here will vary depending
15 on the remote control model.
16 17 9 Media: Enter USB-Digital media player mode
10 Sleep: Set TV sleep time to turn off
18
automatically at appointed time
11 I/II: Select Stereo or Mono in ATV mode

20
12 Lang.: Select audio Language
19
22 13 Subtitle: Activate or deactivate the subtitle
mode
21 23 14 FAV/FAV-/FAV+: Fast access to favorite
24 program that you saved
15 Special function buttons
16 Menu: Display the quick setup menu/returns
to the previous menu
17 Exit: Exit the menu
18 / / < / >/OK: Allows you to navigate the
OSD menus and adjust the system settings to
your preference/Confirm the selection in the
OSD menus
19 Info: Display the current program
information
20 EPG: Display the Electronic Program Guide (DTV
mode)
21 CH + /-: Switch channel
22 Picture: Fast access to picture setting menu
23 VOL + /-: Adjust the volume
24 Sound: Fast access to sound setting menu

9
 Remote Control

25 Number button: Direct channel selection or

numbers input
26 Still: Freezes video
27 Recall: Return to the program that last viewed
28 T.Shift: Time shift in DTV mode
NOTE: The information here will vary depending
on the remote control model.
29 Text, Hold, Index, Size, Reveal, Subpage
buttons can be used in DTV/ATV mode
30 Media content control function buttons
NOTE: The information here will vary depending
on the remote control model.
31 Pvr list: Display video recorder list on the screen
NOTE: The information here will vary depending
on the remote control model.
32 (Thailand) AD: Set the audio description on or
off
NOTE: The button is AD for Thailand area.
The information here will vary depending on the
remote control model.

NOTE: The included remote control will vary

depending on model, country. Check information
according to the actual remote control in the
accessory bag.
25

26 27
28 29
30 32
31

10
 Remote Control

1 POWER: Switch the TV on or into standby

mode
1 2 2 SOURCE: Select input sources
3 Number button: Direct channel selection or
numbers input
3 4 GUIDE: Display the Electronic Program Guide
(DTV mode)
5 CH.LIST: Display the Channel List on the
4 5 screen
6 Special function buttons
6
7 : Display the quick setup menu/returns
7 8 to the previous menu
8 INFO: Display the current program
10 information
9
9 / / < / >: Allows you to navigate the OSD
menus and adjust the system settings to
your preference
11 12 10 OK: Confirm the selection in the OSD
14 menus
11 TXT: Turn on/off the teletext function
13 15
12 EXIT: Exit the menu
13 VOL + /-: Adjust the volume
16
14 NOTE:The information here will vary
17 depending on the remote control model.
: Start recording
ZOOM: Select the screen aspect ratio
18 19
15 CH / : Switch channel
<
<

20 21 16 MUTE: Mute or restore the TV sound

22 23 17 Media content control function buttons
18 LANGUAGE: Select audio Language/Select
Stereo or Mono in ATV mode
19 SUBTITLE: Activate or deactivate the subtitle
mode
20 FAV: Fast access to favorite program that
you saved
NOTE: The included remote control 21 RECALL: Return to the program that last
will vary depending on model, country. viewed
Check information according to the 22 PICTURE: Fast access to picture setting
actual remote control in the accessory menu.
bag. 23 SOUND: Fast access to sound setting menu
11
 Remote Control

Installing Batteries in the Remote Control

1. Slide the back cover to open the battery compartment

of the remote control.

2. Insert two AAA size batteries. Make sure to match

the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.

3. Close the battery compartment with the cover.

NOTES
Product image is only for reference, actual product may vary in appearance.
Handling the Batteries
Incorrect use of batteries may cause corrosion or battery leakage, which could
cause fire, personal injury or damage to property.
Only use the battery type indicated in this manual
Do not mix old and new batteries or different types of batteries .
Do not dispose of used batteries as domestic waste. Dispose of them in
accordance with local regulations.

Remote Control Operation Range

12
 Turning the TV on for the First Time

Turning the TV on for the First Time

1. Connect the mains cable to the mains socket after you have completed all the
connections.
2. The first time you turn the TV on, it will go straight into the Installation Guide.
3. Press the [ / / < / >] buttons to navigate the menu and change the settings.
Press the [OK] button to confirm.

Language Select your desired language to be displayed on the menu.

Location Using the D-pad arrows of your remote,choose your country.

Choose retail mode on for shopping mall,keep retail mode off for
Retail Mode
home use.
Complete Confirm your setting.

Tuning Setup Set tuning mode.

Channel
Start to search program.
Tuning

13
 Specifications

Features, appearance and specifications are subject to change without notice.

Item 32" 40"

28.2 × 16.9 × 3.4 inches 35.2 × 20.2 × 3.4 inches
Without Stand
Dimension (717 × 428 × 86 mm) (893 × 513 × 86 mm)
(W × H × D) 28.2 × 18.5 × 6.3 inches 35.2 × 22.0 × 7.2 inches
With Stand
(717 × 469 × 160 mm) (893 × 559 × 182 mm)
Without Stand 8.4 lbs (3.8 kg) 11.9 lbs (5.4 kg)
Weight
With Stand 8.6 lbs (3.9 kg) 12.1 lbs (5.5 kg)
Active Screen Size (Diagonal) 80 cm 100 cm
Screen resolution 1366 × 768 1920 × 1080
Operating mode power density 0.020 Watts/cm² 0.017 Watts/cm²
Power consumption when turned off < 0.5 W < 0.5 W
Power consumption in standby mode 0.5 W 0.5 W
Audio power 6W + 6W 7W + 7W
Power consumption 55 W 70 W
Power supply AC 100-240V 50/60Hz

Receiving Analog PAL-D/K, B/G, I, SECAM-D/K, B/G

systems Digital DVB-T/T2, DVB-C, DVB-S/S2
Temperature: 41°F - 95°F (5°C - 35°C)
Environmental conditions Humidity: 20% - 80% RH
Atmospheric pressure: 86 kPa - 106 kPa
RGB / 60 Hz (640×480, 800×600, 1024×768)
HDMI Input YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I)
YUV / 50Hz (576 I, 576 P, 720 P, 1080 I)

14
 Other Information

Recycling/Licenses
WEEE (Waste Electronic Electric Equipment)
European Directive 2012/19/EU

This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that
it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.

Batteries

In accordance with the Battery Directive, used batteries should not

be disposed of in the domestic waste. Dispose your batteries in the
collection containers specific for this purpose in retail stores.

ROHS (Restriction of Hazardous Substance)

European Directive 2011/65/EU

This European directive limits the use of dangerous and hazardous

substances which are difficult to recycle.
This allows recycling easily the EEE and contributes to the safeguard of
the environment.
Substances included in this product match to the RoHS directive.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby, Dolby

Audio, Pro Logic, and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. Copyright 1992-2019
Dolby Laboratories. All rights reserved.

15
 Other Information

EPREL Registration Information

Model identifier Eprel registration number Model identifier Eprel registration number
32A5100F 359247 40A5100F 358779
32A5120F 359252 40A5120F 359658
32A5140F 359633 40A5140F 359662
32A5160F 359636 40A5160F 359663
32AE5000F 359640 40AE5000F 359665
32AE5010F 359642 40AE5010F 359667
32AE5030F 359644 40AE5030F 359669
32AE5050F 359647 40AE5050F 359670

16