Dr.

Fixit Roofseal Ultra

COATINGS & PAINTS

ACRY L AT E WIT H F LU T Y N E

Description
Dr. Fixit Roofseal Ultra is a next-generation, liquid-applied, polyurethane hybrid roof topcoat waterproof
coating with Flutyne protection technology. Designed to resist water intrusion and heat, it forms a highly
elastic, seamless membrane that provides excellent protection from moisture and is resistant to ponding water.
It also exhibits excellent resistance to UV radiation and thermal aging.

654 Dr. Fixit Roofseal Ultra

Standard Compliance / Specification
Dr. Fixit Raincoat surpasses the ASTM D 6083-TType I standard specification, offering exceptional
waterproofing and long-term durability.

Areas of Application
Topcoat for waterproofing various surfaces like terraces, flat and sloped roofs, curved roofs, etc.
} Brickbat coba finish
} Cement mortar screed
} China mosaic tile roofs
} Ceramic tile roofs
} Complex detailing, up-stands, penetrations, and terminations

Features & Benefits

} Superior Waterproofing: Provides long-lasting protection against harsh weather conditions.
} Long-Lasting Performance: Demonstrates excellent weathering resistance (up to 15 years) when reinforced
with glass fiber mesh.
} High-Build System: Achieves a higher dry film thickness up to 1 mm for enhanced protection.
} Crack Bridging: Exhibits outstanding flexibility, effectively bridging cracks up to 3 mm.
} Reflective Properties: Reduces surface temperatures by up to 10°C in peak summer, contributing to
energy savings.
} User-Friendly: A single-component, ready-to-use product for easy application.
} Eco-Conscious: Low VOC formula complies with green building standards.

Methods of Application
1 S U R FAC E P R E PA R AT I O N :
} The terrace roof must be cleaned with stiff nylon and wire brushing, followed by high-pressure water jet
cleaning. Algae and fungus on the parapet walls and terrace roof shall be treated with a fungicidal solution.
} Freshly laid cement-sand concrete screed should be designed to be greater than 80 mm thick and have a
50 mm thickness at the end slope. Allow the concrete to complete a wet and dry cure for 8 weeks before
applying the top coat coating.
} Mechanical methods like grinding are recommended to enhance the adhesion and bonding of coatings to
smooth, fresh concrete surfaces to remove contaminants, laitance, and existing coatings.
} For a full roof repair, according to IS 456-2000, the minimum grade of concrete screed should be M25 or M20
with a maximum free water-to-cement ratio of 0.5 and a minimum cement content of 300 kg/m3. This screed
should be admixed with Integral waterproofing liquid Dr. Fixit LW+ and 12 mm and 6 mm micro
polypropylene fibers.
} Make sure that the roof slope is at least 1 in 80 or 1 in 100, as per the specified requirements.
} Remove concrete screed, brickbat coba, China mosaic, or ceramic tiles if they are found to be debonded by
more than 30% from the roof substrate during a hammer test. Proceed to reach up to the base slab level for
fresh waterproofing as necessary.
} Thoroughly inspect the terrace roof for cracks, blisters, ponding, exposed foam, and open seams. Evaluate
the debonding of screeds or tiles on the terrace roof by tapping with a nylon hammer. Give special attention
to areas around roof penetrations, ponding spots, and parapet wall cracks.
97

654 Roofseal Ultra 07/02/25

 COATINGS & PAINTS

} Ensure there is a single water drain outlet of at least 100 mm in diameter for a 500-square-foot floor area,
and gaps around pipe inserts should be sealed properly with polymer-modified mortar.
} Stagnant water caused by undulations in the roof surface should be identified and repaired using Polymer-
Modified Mortar (PMM).
} All joints / corners / penetration points, rainwater outlets, marble / tile strip joints should be grouted with
polymer modified mortar.
} Ensure that all penetration points, mechanical equipment, HVAC & solar panels are suitably placed.
654 Dr. Fixit Roofseal Ultra

S C R E E D R E PA I R :
} Remove loose and damaged / hollow sound concrete roof screed in pockets with mechanical cutter.
} Clean the concrete screed with water to remove dirt and loose particles.
} Brush applies a bond coat of SBR based polymer & cement mixed in the ratio of 1:1 (SBR polymer 1: Cement
1) by volume to make it lump free slurry coat. Repair the damaged concrete screed surface with Polymer
Modified Mortar mixed with SBR based polymer 10% by weight of cement in (M20) concrete in ratio of 1:1.5:3
i.e., one bag of 50kg cements: 1.5 times volume of sand: 3 times volume of aggregates: 25L water.
} Level the repair mortar and finish with trowel by providing proper slope. Moist cures the repaired surface for
7 days. Air cure screed for 4-5 days, before application of roof topcoat coating system.
TREATMENT OF ROOF WITH STAGNANT WATER:
} Make the surface rough by hacking and chipping out the undulations portion. Extend it on the larger area to
create slop towards drain.
} Apply a bond coat of Dr. Fixit Pidicrete URP mix in the ratio of 1:1 (URP 1: Cement 1) by volume to make it lump
free slurry when applied on in the pre wet surface.
} Prepare the Polymer modified mortar (PMM) mixing with Dr. Fixit Pidicrete URP 10% by weight of cement
in the ratio of 1:3 when the bond coat is tacky, finishing with trowel. Moist wet curing must be done up to
3-4 days.
SCREED CRACK REPAIR:
} All visible hairline cracks on concrete roof screed > 0.50 mm and not giving hollow sound, should be cut and
widen in V shape with mechanical cutter in the size (10mm W x 6mm D) and filling the same with Hybrid / PU
sealant with suitable gun.
} Allow sealant to cure a minimum 72 hours (about 3 days).
} Apply a bandage of Dr. Fixit Roofseal Ultra in 2 coats reinforce with 45 GSM glass fiber mesh over and above
the crack repair surface in the length of crack.
RAINWATER OUTLETS TREATMENT:
} Hacking and chipping the surface around the rainwater drain outlet mouth up to 25mm in depth.
} Apply a bond coat of SBR based polymer Dr. Fixit Pidicrete URP & cement mixed in the ratio of 1:1 (polymer 1:
Cement 1) by volume over the corners and pipe insert outlet gaps. Filling the gaps around drain mouth with
(PMM) polymer modified mortar mixed with Dr. Fixit Pidicrete 10% by weight of cement in the ratio of 1:3.
Providing & fixing 100 mm width 45gsm glass fiber mesh all around the periphery of drain mouth of rainwater
outlet sandwiched with Dr. Fixit Roofseal Ultra waterproof coating. Apply the second coat on an interval of
4-6 hours, all over the rainwater outlet.
VERTICAL UP STAND DETAILING:
} Providing 100mm x 100 mm Square / rectangle up-stand of M20 grade concrete or with Polymer Modified
mortar around mechanical equipment like HVAC, air-conditioning, solar panels. Etc.
} Apply 2 coats of Dr. Fixit Roofseal Ultra dilute without water dilution sandwiched with 45 Gsm glass fiber mesh
in the interval of 4 -6 hrs. Ensure that all the reinforcement is properly placed and embedded with material.

2 WAT E R P R O O F I N G A P P L I C AT I O N
} Dilute 2 parts of Dr. Fixit Primeseal with 1 part of water to cover 8 sq. m. Allow the primer coat to dry for 6 to
8 hours.
} Stir well before using. Apply the 1st coat of Dr. Fixit Roofseal Ultra waterproof coating without dilution at a
rate of 0.70-0.75 liters per sq. m. per coat.
98
 COATINGS & PAINTS
} Lay down a 45 GSM fiber glass mesh into the coating as a sandwich layer while the first coat is still wet.
} Second coat application: Allow the first coat to dry for approximately 4-6 hours before applying the second
coat at a 90° angle to the first coat.
} Apply the second coat of Dr. Fixit Roofseal Ultra waterproof coating without dilution at a rate of 0.70-0.75
liters per sq. m. per coat, ensuring total material consumption of 1.40–1.50 liters per sq. m. in 2-3 coats.
} Ensure there are no pinholes or air bubbles on the membrane.

654 Dr. Fixit Roofseal Ultra

} Allow the system to air cure for a minimum of 7 days.
FO R V E R T I C A L WA L L A N D PA R A P E T WA L L S U R FAC E S
} Apply the Dr. Fixit Raincoat Classic / Select external wall coating system on vertical surface and parapet wall
for complete waterproofing of terrace roofs.
3 M A I N T E N A N C E & R ECOAT I N G
} If Dr. Fixit Roofseal Ultra coating develops cracks due to weathering or temperature variations over time, it
can be easily repaired. Simply cut any cracks into a V-groove up to 8mm in width and depth and fill them with
PU / hybrid sealant. Allow the sealant to air cure for 72 hrs, then place a 45-gsm glass fiber mesh over length
of crack and apply with Dr. Fixit Roofseal Ultra. Apply the second coat after the interval of 4-6 hrs ensuring no
void areas are left uncoated with the second coat.
4 P O S T A P P L I C AT I O N
} let the waterproofing cure for at least 7 days before you proceed with your flood / pond testing by ponding
water up to 50mm height for 24 hrs.
5 D RY I N G/ C U R I N G T I M E AT 3 0 0 C / 8 5% R H
} Touch Dry – 60 min.
} Hard Dry – 5 to 6 hours.
} Drying times may vary depending on the prevailing climatic conditions; low temperature and higher relative
humidity may prolong the drying process.

6 TO O L S C L E A N - U P
} Brush & Roller can be cleaned up with water while it is still wet.

Precautions & Limitations

} All corners, gaps, joints, Roof leak repair area & outlets shall be coated with two extra coats.
} Do not apply if rain is expected within 48 hours after application.
} The product is designed only for foot traffic and not vehicular or movement of machinery or equipment.
} Do not apply Dr. Fixit Roofseal Select over expansion or moving joints.
} To achieve the full proof waterproofing, parapet walls should be covered with Dr. Fixit Raincoat.
} Dr. Fixit Roofseal Ultra is recommended over existing building Flat/ Slope roof surface like Brick-Bat Coba
finish, Screed China mosaic roof tile surface, Clay tile roof. Apply Dr. Fixit Primer AC for application on non-
porous surfaces like Marble, Granite, glazed ceramic tiles surfaces not recommend for application on Kota, &
kadappa stone tiles and mud phuska roof, and over mangalore tile surface.
} Do not apply when ambient temperature is below 10°C or above 36°C.
} Keep the material in close when not in use.
} Pidilite Industries does not provide a warranty for dirt pick-up on Roofseal Ultra.
99
 COATINGS & PAINTS

Technical Information

PROPERTIES UNIT TEST METHOD RESULTS

Solid Content % ASTM D1644 69± 2

654 Dr. Fixit Roofseal Ultra

Density (gm/cc) ASTM D 1475 1.43

Elongation at Break % % ASTM D 412 300
Tensile Strength with 45 Gsm N/mm 2
ASTM D 412 4
Pull off Adhesion N/mm 2
ASTM D 4541 1.8
Shore A Hardness Values ASTM D 2240 72
Crack Bridging Ability mm EN 1062 -7 3
Water Vapour transmission g/m /day
2
ASTM E 96 26
Tear Resistance with 45 Gsm GF mesh K/Nm ASTM D 624 69
Water immersation test Visual ISO 2812- 2 Resistant
Dry Film Thickness µ EN 1062 -1 950

Test Conducted Test method Specification as per Test results

ASTM D 6083 M Type I

Solid Content w/s % ASTM D 1644 > 60 69 ± 2

Stormer Viscosity @23 C KU
°
ASTM D 562 80 -145 128
Initial Elongation at Break % % ASTM D 2370 Min. 100 300
Tensile Strength N/mm with GF mesh ASTM D 2370
2
Min 1.4 4
Permeance ASTM D 1653 Max 50 26
Peal Adhesion to Concrete N/m2 ASTM D 903 Min 350 475
Adhesion to Aluminum N/m 2
ASTMD C 794 Min 350 430
Adhesion to Mortar N/m 2
ASTMD C 794 Min 350 450
Adhesion to Glass N/m 2
ASTMD C 794 Min 350 380
Low temperature flexibility after ASTM D 522 Min Pass 13 mm mandrel Pass
1000 Hrs. accelerated weathering @ 10 °C
Final Elongation after 1000 Hrs. ASTM D 2370 Min 100 % 130
Accelerated weathering
Accelerated weathering 1000 Hrs. ASTM D 4798 Visual No Cracking
Fungi resistance ASTM G 21 Zero Rating Zero
Tear resistance K/Nm ASTMD 624 >21 25
Tear resistance K/Nm with GF mesh ASTMD 624 >21 69
Water swelling % ASTM D 471 Max 20 0.2
Shore A Hardness ASTM D 2240 Value 72
Crack bridging ability mm ASTM C 1305 Visual Pass - No sign of
cracking, Splitting
and pinholes
Resistance to Fire ASTM E 108:2020 Spread of Flame Class A
100
 COATINGS & PAINTS
Adhesion to Concrete N/mm2 ASTM D 4541 1.8
SRI Index ASTM E 1980-01 104-106
Water permeability @5 bar EN 12390-8 Nil
The values in the above table are obtained in controlled lab conditions when tested properly by competent laboratory.

654 Dr. Fixit Roofseal Ultra

Note: Tolerance up to 5 % on the lower side from the above values is allowable.

Theoretical Coverage*
Consumption at the rate 1.40- 1.50 / Litre Sq.mt in 2-3 heavy coats to achieve dry film thickness of 900 to 1000
microns.
*Coverage may vary based on surface conditions and the application method. Additional material may be needed to achieve the
desired dry film thickness (DFT)..
**The thermal performance of Dr. Fixit Roofseal Ultra was assessed on roofing surfaces using infrared thermometry. The actual
temperature reduction depends on factors such as external wall and window heat gain and environmental conditions.

Packaging
20,4 Litre (Colour: White)

Shelf Life & Storage

} Shelf life is 36 months from the date of manufacturing in unopened conditions. To be stored in original and

unopened packaging in a cool and dry place away from direct sunlight.
} Recommend temperatures of (10°– 30°Celsius) for storage of Dr. Fixit Roofseal Ultra and anything below 10 °

Celsius and above 30°Celsius is certainly not recommended.

Health & Safety

} Skin Contact: Wash skin with soap & water. Remove contaminated clothes

} On eye contact: Immediately splash eyes with plenty of water. Consult Physician if irritation persists

} Ingestion: It is based on Water Based Coating system, however, seek medical help.

Other Products Categories available

Dr. Fixit brings you the widest range of Construction Chemicals

Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
Construction Chemicals Division & its agents has been provided in good faith & meant to serve only as a general
Ramkrishna Mandir Road, Post Box No. 17411 guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA
products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
used and the on-site workmanship are factors beyond our control, there are no
www.drfixit.co.in • [email protected] expressed or implied guarantee / warranty as to the results obtained. The company
Dr. Fixit Advice Centre (Toll Free No.) 1800 209 5504 does not assume any liability or consequential damage for unsatisfactory results,
101

arising from the use of our products.