Scribd
Upload
24 views1 page

Ups - S3T XTD 15 TDS

The Sentryum S3T XTD 15 is a three-phase UPS with a rated power of 15000 VA, featuring a voltage tolerance of 400 ±20% and a power factor of 0.99. It includes various battery types, communication interfaces, and operates efficiently in environments with temperatures from 0 °C to +40 °C. The device complies with European safety and electromagnetic compatibility standards and has a weight of 105 kg with dimensions of 1320x440x840 mm.

Uploaded by

jfaayonayon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

Ups - S3T XTD 15 TDS

The Sentryum S3T XTD 15 is a three-phase UPS with a rated power of 15000 VA, featuring a voltage tolerance of 400 ±20% and a power factor of 0.99. It includes various battery types, communication interfaces, and operates efficiently in environments with temperatures from 0 °C to +40 °C. The device complies with European safety and electromagnetic compatibility standards and has a weight of 105 kg with dimensions of 1320x440x840 mm.

Uploaded by

jfaayonayon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sentryum

S3T XTD 15
INPUT
Rated power 15000 VA
Voltage 380 / 400 / 415 V three-phase + N
Voltage tolerance 400 ±20% @ full load (for wider tolerance conditions apply)
Frequency tolerance 40 - 72 Hz
Power factor 0.99

BY PASS
Rated voltage 380 / 400 / 415 V three-phase + N
Voltage tolerance From 180 V (adjustable 180-200) to 264 V (adjustable 250-264) referring to neutral (Ph-N)
Rated frequency 50 or 60 Hz (selectable)
Frequency tolerance ±5% (selectable)
Number phases 3+N

OUTPUT and INVERTER OUTPUT


Rated power 15000 VA
Active power 15000 W
Output current 24 A
Number phases 3+N
Crest factor (Ipeak/Irms) 3:1
Waveform Sinusoidal
Static stability ±1%
Dynamic stability EN 62040-3 class performance 1 distorting load
Frequency 50 or 60 Hz
Voltage distortion with non- ≤1.5%
linear load
Voltage distortion with <1%
linear load

BATTERIES
Type VRLA AGM/GEL/NiCd/Li-ion/Supercaps
Type of charging One level, Two level, Cyclic recharge (selectable)

ENVIRONMENTAL
Color RAL 7016 Anthracite grey
Communication UPS status led bar - Graphic touch screen diplay - 2 slots for communications interface USB - RS232
- Contact interface with 5x opto insulated Input and 4x Output relays
Protection rating IP20
Line-Interactive/Smart Up to 99%
Active efficiency
Noise (at 1 m) <40 [dBA ±2] (SMART ACTIVE)
Remote signals voltage free contacts
Operating temperature 0 °C - +40 °C
Relative humidity 5-95% non-condensing
Standards European directives: L V 2014/35/EU low voltage; EMC 2014/30/EU electromagnetic compatibility
-- Directive and Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant --
Classification in accordance with IEC 62040-3 VFI - SS - 111

DATA
Weight 105 kg
Dimensions (h w d) 1320x440x840 mm

© RPS Spa - Member of the Riello Elettronica Group - VAT IT02647040233 - Fully paid-up share capital: € 1.230.278,00 - Business Register Verona: N°
REA 252296

You might also like