SHIELD GEAR OIL SAE 80W90
Revision Number: 3 Revision Date: 13/10/2019
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: SHIELD GEAR OIL SAE 80W90
Product Use: Lubricating Oil
Company Identification Emergency Telephone Number
Kuwait Dana Lubes Company (965) 23260723
Postal Box: 9150
Ahmadi – Kuwait – 61001.
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Product definition: Mixture
Classification as per regulation (EC) No. 1272/2008 [CLP/GHS]: Aspiration toxicant: Category 1
GHS Label Elements
Signal Word: Danger!
Precautionary Statements
Response: IF SWALLOWED: Immediately call a poison center or doctor/physician. Do NOT induce vomiting.
Storage: Store locked up.
Disposal: Dispose of contents/container in accordance with applicable local/regional/national/international
regulations.
Emergency Overview
Color: Straw. [Light]
Physical state: Liquid. [Fluid]
Odor: Mild hydrocarbon.
Hazard statements: This substance may be fatal if swallowed and enters airways, causes damage to organs
through prolonged or repeated exposure.
Precautions: When handling this substance: do not breathe the dust, fume, gas, mist, vapors or spray; wear
protective gloves and/or clothing, and eye and/or face protection.
OSHA/HCS status: Under United States Regulations (29 CFR 1910.1200 Hazard Communication Standard), this product is
considered hazardous.
Potential acute health effects
Eye: Irritates the eyes- can cause irritation or serious damage to the eye.
Skin: Irritates the skin- Can cause irritation or serious damage to the skin
Inhalation: Inhalation of vapor or oil mist from this product can be fatal for humans and other mammals.
Ingestion: Can cause serious damage if ingested.
Birth Defects: Can cause harm to the developed child including birth defects, low birth weight and biological or
behavioral problems that appear as child grows.
Cancer: May cause or increase the risk of cancer.
ENVIRONMENTAL HAZARDS
May cause long-term adverse effects in the aquatic environment.
NFPA Hazard ID: Health: 0 Flammability: 1 Reactivity: 0
HMIS Hazard ID: Health: 0 Flammability: 1 Reactivity: 0
3. COMPOSITION/INFORMATION ON INGREDIENTS
NO COMPOSITION CAS NO AMOUNT
1. Distillates (petroleum), hydro treated heavy paraffinic 64742-54-7 98%-100%
2. Additives 9010-79-1 0%-2%
There are no additional items present the supplier has knowledge of and in the concentrations applicable classified as
hazardous to health or the environment or have been assigned a workplace exposure limit and hence require reporting in this
section.
4. FIRST AID MEASURES
EYE: Flush immediately with water for at least 15 minutes. Get immediate medical attention.
SKIN: Wash with soap and water. Remove contaminated clothing. Get medical attention if irritation develops.
INGESTION: DO NOT INDUCE VOMITING. If conscious, give 2 glasses of
water. Get immediate medical attention.
INHALATION: Remove exposed person to fresh air and provide oxygen if breathing is difficult. Get medical attention
5. FIRE FIGHTING MEASURES
Flash point (COC): >190ºC
Auto Ignition: NDA
Upper Flammable Limit: NA
Lower Flammable Limit: NA
Extinguishing Media: CO2, Dry Chemical, Foam, Water Fog
Firefighting procedures: Recommend wearing self-contained breathing apparatus. Water may cause splattering.
Combustion products: Normal combustion forms carbon dioxide, water vapor, and may produce oxides of Sulfur and
Nitrogen. Incomplete combustion may produce carbon monoxide.
6. ACCIDENTAL RELEASE MEASURES
Environmental protection: The material is not expected to be harmful to aquatic organisms. Stop the source of leak or
release. Remove with vacuum trucks or pump to storage salvage vessels. Soak up residue with an absorbent such as Clay,
Sand or other suitable materials.
7. HANDLING AND STORAGE
Handling Procedure: Keep containers closed when not in use. Handling temperatures should not exceed 70ºC.
Storage Procedure: Keep containers in cool and Dry place.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
EYE: Eye protection is required. Recommended chemical goggles or face shield.
SKIN: Protective clothing and gloves are normally required.
VENTILATION: Proper ventilation is required.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Oily Liquid
Boiling Point: NA
Melting Point: NA
Freezing Point: NA
Solubility in Water: Insoluble
Vapor Pressure: <0.1mmHg
Vapor Density(Air =1): NA
PH: NA
10. STABILITY AND REACTIVITY
Stability: Stable
Incompatibility: May react with strong oxidizing agents, such as Chlorates, Nitrates, Peroxides, etc.
Hazardous Polymerization: Polymerization will not occur.
11. TOXICOLOGICAL INFORMATION
Basis for assessment: Information given is based on data on the components and the toxicology of similar products. Unless
indicated otherwise, the data presented is representative of the product as a whole, rather than for individual component(s).
Information on likely routes of exposure:
Skin and eye contact are the primary routes of exposure although exposure may occur following accidental
ingestion.
Acute Toxicity
Acute oral toxicity: Can cause serious damage
Acute inhalation toxicity: Can be fatal on inhalation for humans and other mammals.
Acute dermal toxicity: Can cause serious damage at prolonged contact
Skin corrosion/irritation:
Can cause irritation or serious damage to the skin.
Serious eye damage/eye irritation:
Can cause irritating to the eye or serious damage.
Respiratory or skin sensitization
Substance may cause inflammation or other adverse reaction in the respiratory system.
Aspiration Hazards
Category: 1.
Toxicity: An aspiration hazard as per characteristics and properties.
Germ cell mutagenicity
OSHA HCS 2012•Classification criteria not met.
Carcinogenicity
Can cause cancer or increase the risk of cancer.
Reproductive toxicity
Can cause harm to the developing child including birth defects.
TOST - Single exposure
Based on available data, the classification criteria are not met.
TOST - Repeated exposure
Based on available data, the classification criteria are not met.
Further information
Used oils may contain harmful impurities that have accumulated during use. The concentration of such impurities will depend
on use and they may present risks to health and the environment on disposal. ALL used oil should be handled with caution
and skin contact avoided as far as possible.
12. ECOLOGICAL INFORMATION
Environmental impact: This material is not expected to be readily biodegradable.
Eco toxicity: This material is not expected to be harmful to aquatic organisms.
13. DISPOSAL CONSIDERATIONS
Material, if discarded, not expected to be characteristic hazardous waste. Disposal should be in compliance with federal,
state, and local laws.
14. TRANSPORT INFORMATION
Department of Transportation classification:
Not hazardous by D.O.T. regulations.
DOT Proper Shipping Name: Not Applicable
Other Requirements: Not Applicable
15. REGULATORY INFORMATION
SARA 311 Categories:
1.Immediate (Acute) Health Effects: NO
2.Delayed(Chronic) Health Effects: NO
3.Fire Hazard: NO
4.Sudden Release of Pressure Hazard: NO
5.Reactivity Hazard: NO
STATE REGULATORY INFORMATION:
Based on information available this product does not contain any chemical substance regulated by a specific state law.
16. OTHER INFORMATION
NFPA RATINGS: Health 1; Flammability 1; reactivity 0;
HMIS RATINGS: Health 1; Flammability 1; reactivity 0;
(0- Least, 1- Slight, 2- Moderate, 3- High, 4- Extreme, PPE- Personal)
Revision statement: This is a new Material Safety Data Sheet.
ABBREVIATION THAT MAY HAVE BEEN USED IN THIS DOCUMENT:
NDA: No Data Available
CAS: Chemical Abstract Service Number
NFPA: National Fire Protection Association
NA: Not Applicable
****
