9116/10

Gantrail Welded Base Fixing

www.gantrail.com

9116/10
The GANTRAIL 9116/10 SPECIFICATIONS:
adjustable crane rail clip
MAX SIDE LOAD 40kN
is designed to fix light
10mm HORIZONTAL RAIL ADJUSTMENT
rails in the most arduous
applications. It can DIMENSIONS (mm):
withstand a horizontal
force from the rail of 40kN REF NO. X Y Z WEIGHT
(4.1 tonnes). Its low profile kg
allows it to be used with 9116/10/25 25 41 24 0.67
cranes that are fitted with 9116/10/32 32 41 24 0.69
guide rollers.

FEATURES 1 RAIL WITH PAD 2 RAIL WITHOUT PAD

• The proven design has been
used successfully for many 5 5
years throughout the world.
• The clip is welded to the rail
support. No access is required
from below.
• The two main parts are locked 8
together on tightening the grade
8.8 bolt.
• The clip has a self-tightening
mechanism. M16
X
• A special vulcanised rubber
block applies a controlled force
to the rail.
Y
Z

ASSEMBLY
V
1 W

45 75
2

3
71

55

1. Flange nut
2. Clip cap with integral
rubber block
3. M16 Captive bolt Minimum assembly width - W = Rail width (F) + 118mm V = Rail width (F) + 16mm
4. Weldable base

9116/10/ET/09/14
9116/10
Gantrail Welded Base Fixing
C

A
F C A 1. CLIP REFERENCE 2. CLIP REFERENCE
F mm mm mm FOR RAIL WITH PAD FOR RAIL WITHOUT PAD
A 45 125 45 55 9116/10/32 9116/10/25
A 55 150 55 65 9116/10/32 9116/10/25
A 65 175 65 75 9116/10/32 9116/10/25
A 75 200 75 85 9116/10/32 9116/10/25
S 20 82 44 100 9116/10/32 9116/10/25
S 30 108 60 108 9116/10/32 9116/10/25
S 33 105 58 134 9116/10/32 9116/10/25
S 41 125 67 138 9116/10/32 9116/10/25
ISCR 80 130 82 130 9116/10/32 9116/10/25
QU 70 120 70 120 9116/10/32 9116/10/25
QU 80 130 80 130 9116/10/32 9116/10/25
ISCOR 30 110 57 110 9116/10/32 9116/10/25
ISCOR 40 127 64 127 9116/10/32 9116/10/25
JIS 37 122 63 122 9116/10/32 9116/10/25
JIS 40N 122 64 140 9116/10/32 9116/10/25
22 kg BHP 94 51 94 9116/10/32 9116/10/25
31 kg AS 108 64 118 9116/10/32 9116/10/25
41 kg AS 127 64 137 9116/10/32 9116/10/25
UIC 54 140 70 159 9116/10/32 9116/10/25

This clip can be used for a wider selection of rails than illustrated.
Please contact GANTRAIL for the full range of possible rails. All rails can be fastened with bolted or welded base clips.
GANTRAIL may change or improve their products and also alter specifications without notice.

INSTALLATION INSTRUCTIONS: WELD DETAIL

Weld all round the clip base, except the side closest and parallel to the rail,
with a 3mm throat thickness fillet weld, using low hydrogen electrodes. RAIL EDGE
SEE INSTALLATION INSTRUCTIONS
Recommended electrodes AWS E7018 or E7028. Clip base is made from FOR INFORMATION ON WELDING
weldable grade steel. FRONT EDGE
8

a3
If a continuous weld around the clip base is required, this is possible. (3mm THROAT THICKNESS)
Please consult GANTRAIL for guidance.
TIGHTENING TORQUE 125Nm 9116/10 CLIP BASE

Please contact GANTRAIL, for full installation instructions.

A world of crane rail expertise.

www.gantrail.com
Gantry Railing Ltd Gantrail (Middle East) Ltd
Sudmeadow Road P O Box 61428
Hempsted
Gloucester GL2 5HG
Jebel Ali Free Zone
Dubai
ISO 9002
REGISTERED COMPANY

ENGLAND United Arab Emirates 015

Certificate No. 5180

Tel: +44 (0) 1452 300688 Tel: +971 4 8812 935

Fax: +44 (0) 1452 300198 Fax: +971 4 8812 936
E-mail: [email protected] E-mail: [email protected]
9116/10/ET/09/14