Scribd
Upload
11 views5 pages

Bokaro Steel Plant Linear Grease Trial in HSM Stand No 6

The document details a trial of greasing at the Bokaro Steel Plant's Hot Strip Mill, specifically focusing on the use of Lubgraf CS680 G grease in various roll chocks. Observations indicate that the grease performed similarly to Raj Petro grease after seven days of operation, although there were differences in grease retention on different sides of the linear. Recommendations include checking the water flow rate due to the observed washout of grease on one side.

Uploaded by

Arupanjan Mukherji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
11 views5 pages

Bokaro Steel Plant Linear Grease Trial in HSM Stand No 6

The document details a trial of greasing at the Bokaro Steel Plant's Hot Strip Mill, specifically focusing on the use of Lubgraf CS680 G grease in various roll chocks. Observations indicate that the grease performed similarly to Raj Petro grease after seven days of operation, although there were differences in grease retention on different sides of the linear. Recommendations include checking the water flow rate due to the observed washout of grease on one side.

Uploaded by

Arupanjan Mukherji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Bokaro Steel Plant Linear Grease Trial In HSM Stand No #2,3 and 5

Raj Petro Bottom Roll Drive Side


Reference

Greasing With CS2 680 G in Drive side RR#5


RR#5 Work Side Roll Chock Greasing with
Lubgraf CS680 G

RR#3 Work side Roll Chock Greasing with


Lubgraf CS 680 G
RR #3 Drive Side Greasing with
Lubgraf CS 680 G

Greasing is similarly Done in all roll chock linear and Mill housing before the Roll pushing into the
Housing

This is the Work Side Roll of RR#5


after 7 Days in THE Mill with
Rajpetro
RR #5 after 7 days of working
Work Side and the Performance
in Similar to the Rajpetro grease
in abobe picture

RR #5 after 7 Day in Mill work side Roll


chock linear and Performance is same as
of Rajpetro Grease
These are two different Sides of
Linear in which one side is showing
Grease Film Staying and other Side
showing grease almost Washed out.
Probably the water flow rate needs
to be checked

But This is Similar to the


Photograph Provided for Rajpetro
with No Major Difference

You might also like