Aluminum 7075-T6; 7075-T651
Categories:
Material Notes:
Key Words:
Vendors:
Physical Properties
Density
Mechanical Properties
Hardness, Brinell
Hardness, Knoop
Hardness, Rockwell A
Hardness, Rockwell B
Hardness, Vickers
Tensile Strength, Ultimate
Tensile Strength, Yield
Elongation at Break
Elongation at Break
Modulus of Elasticity
Poissons Ratio
Fatigue Strength
Fracture Toughness
Machinability
Shear Modulus
Shear Strength
Electrical Properties
Electrical Resistivity
Thermal Properties
CTE, linear
Specific Heat Capacity
Thermal Conductivity
Melting Point
Solidus
Liquidus
Processing Properties
Annealing Temperature
Solution Temperature
Aging Temperature
Component Elements Properties
Aluminum, Al
Chromium, Cr
Copper, Cu
Iron, Fe
Magnesium, Mg
Manganese, Mn
Other, each
Other, total
Silicon, Si
Titanium, Ti
Zinc, Zn
Aluminum 7075-T6; 7075-T651
Metal; Nonferrous Metal; Aluminum Alloy; 7000 Series Aluminum Alloy
General 7075 characteristics and uses (from Alcoa): Very high strength material used for highly
stressed structural parts. The T7351 temper offers improved stress-corrosion cracking resistance.
Applications: Aircraft fittings, gears and shafts, fuse parts, meter shafts and gears, missile parts,
regulating valve parts, worm gears, keys, aircraft, aerospace and defense applications; bike frames, all
terrain vehicle (ATV) sprockets.
Data points with the AA note have been provided by the Aluminum Association, Inc. and are NOT FOR
DESIGN.
Composition Notes:
A Zr + Ti limit of 0.25 percent maximum may be used with this alloy designation for extruded and
forged products only, but only when the supplier and the purchaser have mutually agreed.
Composition information provided by the Aluminum Association and is not for design.
Aluminium 7075-T6; Aluminium 7075-T651, UNS A97075; ISO AlZn5.5MgCu; Aluminium 7075-T6;
Aluminium 7075-T651; AA7075-T6; Al7075-T6
Click here to view all available suppliers for this material.
Please click here if you are a supplier and would like information on how to add your listing to this
material.
Metric
2.81 g/cc
Metric
150
191
53.5
87
175
572 MPa
41.0 MPa
@Temperature 371 °C
55.0 MPa
@Temperature 316 °C
76.0 MPa
@Temperature 260 °C
110 MPa
@Temperature 204 °C
214 MPa
@Temperature 149 °C
483 MPa
@Temperature 100 °C
572 MPa
@Temperature 24.0 °C
593 MPa
@Temperature -28.0 °C
621 MPa
@Temperature -80.0 °C
703 MPa
@Temperature -196 °C
>= 462 MPa
@Thickness 88.93 - 102 mm
>= 490 MPa
@Thickness 76.23 - 88.9 mm
>= 496 MPa
@Thickness 63.53 - 76.2 mm
>= 510 MPa
@Thickness 0.203 - 0.279 mm
>= 524 MPa
@Thickness 0.305 - 0.991 mm
>= 524 MPa
@Thickness 50.83 - 63.5 mm
>= 531 MPa
@Thickness 25.43 - 50.8 mm
>= 538 MPa
@Thickness 1.02 - 3.17 mm
>= 538 MPa
@Thickness 3.20 - 6.32 mm
>= 538 MPa
@Thickness 6.35 - 12.7 mm
>= 538 MPa
@Thickness 12.7 - 25.4 mm
503 MPa
>= 372 MPa
@Thickness 88.93 - 102 mm
>= 400 MPa
@Thickness 76.23 - 88.9 mm
>= 421 MPa
@Thickness 63.53 - 76.2 mm
>= 434 MPa
@Thickness 0.203 - 0.279 mm
>= 441 MPa
@Thickness 50.83 - 63.5 mm
>= 462 MPa
@Thickness 0.305 - 0.991 mm
>= 462 MPa
@Thickness 6.35 - 12.7 mm
>= 462 MPa
@Thickness 25.43 - 50.8 mm
>= 469 MPa
@Thickness 1.02 - 3.17 mm
>= 469 MPa
@Thickness 12.7 - 25.4 mm
>= 476 MPa
@Thickness 3.20 - 6.32 mm
32.0 MPa
@Strain 0.2 %,
Temperature 271 °C
45.0 MPa
@Strain 0.2 %,
Temperature 316 °C
62.0 MPa
@Strain 0.2 %,
Temperature 260 °C
87.0 MPa
@Strain 0.2 %,
Temperature 204 °C
186 MPa
@Strain 0.2 %,
Temperature 149 °C
448 MPa
@Strain 0.2 %,
Temperature 100 °C
503 MPa
@Strain 0.2 %,
Temperature 24.0 °C
517 MPa
@Strain 0.2 %,
Temperature -28.0 °C
545 MPa
@Strain 0.2 %,
Temperature -80.0 °C
634 MPa
@Strain 0.2 %,
Temperature -196 °C
9.0 %
@Temperature -196 °C
11%
@Temperature -80.0 °C
11%
@Temperature -28.0 °C
11%
@Temperature 24.0 °C
14%
@Temperature 100 °C
30%
@Temperature 149 °C
55%
@Temperature 204 °C
65%
@Temperature 260 °C
70%
@Temperature 316 °C
70%
@Temperature 371 °C
>= 3.0 %
@Thickness 88.93 - 102 mm
>= 5.0 %
@Thickness 0.203 - 0.279 mm
>= 5.0 %
@Thickness 50.83 - 63.5 mm
>= 5.0 %
@Thickness 63.53 - 76.2 mm
>= 5.0 %
@Thickness 76.23 - 88.9 mm
>= 6.0 %
@Thickness 25.43 - 50.8 mm
>= 7.0 %
@Thickness 0.305 - 0.991 mm
>= 7.0 %
@Thickness 12.7 - 25.4 mm
>= 8.0 %
@Thickness 1.02 - 3.17 mm
>= 8.0 %
@Thickness 3.20 - 6.32 mm
>= 9.0 %
@Thickness 6.35 - 12.7 mm
11%
@Thickness 1.59 mm
11%
@Diameter 12.7 mm
71.7 GPa
0.33
159 MPa
@# of Cycles 5.00e+8
17.6 MPa-m½
16.5 - 19.8 MPa-m½
18.7 MPa-m½
20.0 MPa-m½
22.0 - 25.3 MPa-m½
24.2 MPa-m½
25.0 MPa-m½
28.6 MPa-m½
27.5 - 29.7 MPa-m½
29.0 MPa-m½
70%
26.9 GPa
331 MPa
Metric
0.00000515 ohm-cm
@Temperature 20.0 °C
Metric
21.6 µm/m-°C
@Temperature -50.0 - 20.0 °C
23.4 µm/m-°C
@Temperature 20.0 - 100 °C
23.6 µm/m-°C
@Temperature 20.0 - 100 °C
24.3 µm/m-°C
@Temperature 20.0 - 200 °C
25.2 µm/m-°C
@Temperature 20.0 - 300 °C
0.960 J/g-°C
130 W/m-K
477 - 635.0 °C
477 °C
635.0 °C
Metric
413 °C
466 - 482 °C
121 °C
Metric
87.1 - 91.4 %
0.18 - 0.28 %
1.2 - 2.0 %
<= 0.50 %
2.1 - 2.9 %
<= 0.30 %
<= 0.05 %
<= 0.15 %
<= 0.40 %
<= 0.20 %
5.1 - 6.1 %
English
0.102 lb/in³
English
150
191
53.5
87
175
83000 psi
5950 psi
@Temperature 700 °F
7980 psi
@Temperature 601 °F
11000 psi
@Temperature 500 °F
16000 psi
@Temperature 399 °F
31000 psi
@Temperature 300 °F
70100 psi
@Temperature 212 °F
83000 psi
@Temperature 75.2 °F
86000 psi
@Temperature -18.4 °F
90100 psi
@Temperature -112 °F
102000 psi
@Temperature -321 °F
>= 67000 psi
@Thickness 3.501 - 4.00 in
>= 71100 psi
@Thickness 3.001 - 3.50 in
>= 71900 psi
@Thickness 2.501 - 3.00 in
>= 74000 psi
@Thickness 0.00800 - 0.0110 in
>= 76000 psi
@Thickness 0.0120 - 0.0390 in
>= 76000 psi
@Thickness 2.001 - 2.50 in
>= 77000 psi
@Thickness 1.001 - 2.00 in
>= 78000 psi
@Thickness 0.0400 - 0.125 in
>= 78000 psi
@Thickness 0.126 - 0.249 in
>= 78000 psi
@Thickness 0.250 - 0.499 in
>= 78000 psi
@Thickness 0.500 - 1.00 in
73000 psi
>= 54000 psi
@Thickness 3.501 - 4.00 in
>= 58000 psi
@Thickness 3.001 - 3.50 in
>= 61100 psi
@Thickness 2.501 - 3.00 in
>= 62900 psi
@Thickness 0.00800 - 0.0110 in
>= 64000 psi
@Thickness 2.001 - 2.50 in
>= 67000 psi
@Thickness 0.0120 - 0.0390 in
>= 67000 psi
@Thickness 0.250 - 0.499 in
>= 67000 psi
@Thickness 1.001 - 2.00 in
>= 68000 psi
@Thickness 0.0400 - 0.125 in
>= 68000 psi
@Thickness 0.500 - 1.00 in
>= 69000 psi
@Thickness 0.126 - 0.249 in
4640 psi
@Strain 0.2 %,
Temperature 520 °F
6530 psi
@Strain 0.2 %,
Temperature 601 °F
8990 psi
@Strain 0.2 %,
Temperature 500 °F
12600 psi
@Strain 0.2 %,
Temperature 399 °F
27000 psi
@Strain 0.2 %,
Temperature 300 °F
65000 psi
@Strain 0.2 %,
Temperature 212 °F
73000 psi
@Strain 0.2 %,
Temperature 75.2 °F
75000 psi
@Strain 0.2 %,
Temperature -18.4 °F
79000 psi
@Strain 0.2 %,
Temperature -112 °F
92000 psi
@Strain 0.2 %,
Temperature -321 °F
9.0 %
@Temperature -321 °F
11%
@Temperature -112 °F
11%
@Temperature -18.4 °F
11%
@Temperature 75.2 °F
14%
@Temperature 212 °F
30%
@Temperature 300 °F
55%
@Temperature 399 °F
65%
@Temperature 500 °F
70%
@Temperature 601 °F
70%
@Temperature 700 °F
>= 3.0 %
@Thickness 3.501 - 4.00 in
>= 5.0 %
@Thickness 0.00800 - 0.0110 in
>= 5.0 %
@Thickness 2.001 - 2.50 in
>= 5.0 %
@Thickness 2.501 - 3.00 in
>= 5.0 %
@Thickness 3.001 - 3.50 in
>= 6.0 %
@Thickness 1.001 - 2.00 in
>= 7.0 %
@Thickness 0.0120 - 0.0390 in
>= 7.0 %
@Thickness 0.500 - 1.00 in
>= 8.0 %
@Thickness 0.0400 - 0.125 in
>= 8.0 %
@Thickness 0.126 - 0.249 in
>= 9.0 %
@Thickness 0.250 - 0.499 in
11%
@Thickness 0.0625 in
11%
@Diameter 0.500 in
10400 ksi
0.33
23000 psi
@# of Cycles 5.00e+8
16.0 ksi-in½
15.0 - 18.0 ksi-in½
17.0 ksi-in½
18.2 ksi-in½
20.0 - 23.0 ksi-in½
22.0 ksi-in½
22.8 ksi-in½
26.0 ksi-in½
25.0 - 27.0 ksi-in½
26.4 ksi-in½
70%
3900 ksi
48000 psi
English
0.00000515 ohm-cm
@Temperature 68.0 °F
English
12.0 µin/in-°F
@Temperature -58.0 - 68.0 °F
13.0 µin/in-°F
@Temperature 68.0 - 212 °F
13.1 µin/in-°F
@Temperature 68.0 - 212 °F
13.5 µin/in-°F
@Temperature 68.0 - 392 °F
14.0 µin/in-°F
@Temperature 68.0 - 572 °F
0.229 BTU/lb-°F
900 BTU-in/hr-ft²-°F
890 - 1175 °F
890 °F
1175 °F
English
775 °F
870 - 900 °F
250 °F
English
87.1 - 91.4 %
0.18 - 0.28 %
1.2 - 2.0 %
<= 0.50 %
2.1 - 2.9 %
<= 0.30 %
<= 0.05 %
<= 0.15 %
<= 0.40 %
<= 0.20 %
5.1 - 6.1 %
Comments
AA; Typical
Comments
AA; Typical; 500 g load; 10 mm ball
Converted from Brinell Hardness Value
Converted from Brinell Hardness Value
Converted from Brinell Hardness Value
Converted from Brinell Hardness Value
AA; Typical
Plate; T62, T651
Plate; T62, T651
Plate; T62, T651
Sheet
Sheet
Plate; T62, T651
Plate; T62, T651
Sheet
Sheet
Plate; T62, T651
Plate; T62, T651
AA; Typical
Plate; T62, T651
Plate; T62, T651
Plate; T62, T651
Sheet
Plate; T62, T651
Plate; T62, T651
Sheet
Plate; T62, T651
Plate; T62, T651
Sheet
Plate; T62, T651
Sheet
Plate; T62, T651
Sheet
Plate; T62, T651
Plate; T62, T651
Plate; T62, T651
Plate; T62, T651
Sheet
Plate; T62, T651
Sheet
Sheet
Plate; T62, T651
AA; Typical
AA; Typical
AA; Typical
AA; Typical; Average of tension and compression. Compression modulus is about 2% greater than
tensile modulus.
completely reversed stress; RR Moore machine/specimen
T651; Plate; S-L; average
T651; Plate; S-L
T651; Forgings; S-L
K(IC) in S-L Direction
T651; Plate; T-L
T651; Plate; T-L; average
K(IC) in T-L Direction
T651; Plate; L-T; average
T651; Plate; L-T
K(IC) in L-T Direction
0-100 Scale of Aluminum Alloys
AA; Typical
Comments
AA; Typical
Comments
AA; Typical; average over range
AA; Typical at 77°F
AA; Typical range based on typical composition for wrought products >= 1/4 in. thickness.
Homogenization may raise eutectic melting temperature 20-40°F but usually does not eliminate it.
AA; Typical
AA; Typical
Comments
Comments
As remainder
