GUJARAT TECHNOLOGICAL UNIVERSITY

Program Name: Diploma in Engineering

Level: Diploma
Branch: Power Electronics /Automation & Robotics / Civil Engineering/ Environmental
Engineering /Mining Engineering / Ceramic Technology / Chemical Engineering
/Metallurgy Engineering/Plastics Engineering/Mechanical Engineering /Mechanical
Engineering (CAD/CAM) /Automobile Engineering / Fabrication Technology /
Mechatronics Engineering / Textile Processing Technology
Course / Subject Code : DI01000111
Course / Subject Name : Engineering Graphics

w. e. f. Academic Year: 2024-25

Semester: 1st
Category of the Course: ESC-01

Prerequisite: Zeal to learn the subject.

Engineering Drawing is language of engineers. It is the foundation block which

Rationale: strengthens the engineering structure. Moreover, it is the transmitting link between
ideas and realization.

Course Outcome:

After Completion of the Course, Student will able to:

Course RBT Level
No
Outcomes
01 Apply the conventions and methods of engineering drawing. Application

02 Construct engineering curves as per given dimensions. Remember

03 Draw the projection of points, lines and planes under different conditions. Analyze

04 Draw orthographic projection from isometric views of simple objects. Application

05 Draw isometric views from orthographic projection of simple objects. Application

*Revised Bloom’s Taxonomy (RBT)

w.e.f. 2024-25 http://syllabus.gtu.ac.in/ P a g e 1 of 4

 GUJARAT TECHNOLOGICAL UNIVERSITY
Program Name: Diploma in Engineering
Level: Diploma
Branch: Power Electronics /Automation & Robotics / Civil Engineering/ Environmental
Engineering /Mining Engineering / Ceramic Technology / Chemical Engineering
/Metallurgy Engineering/Plastics Engineering/Mechanical Engineering /Mechanical
Engineering (CAD/CAM) /Automobile Engineering / Fabrication Technology /
Mechatronics Engineering / Textile Processing Technology
Course / Subject Code : DI01000111
Course / Subject Name : Engineering Graphics

Teaching and Examination Scheme:

Total
Teaching
Credits
Scheme(in Assessment Pattern and Marks
L+T+
Hours)
(PR/2)
Total
Theory Tutorial / Practical Mark
ESE PA / CA s
L T PR C
(E) (M) PA/CA (I) ESE (V)

2 0 2 3 70 30 20 30 150

Course Content:

Unit No. of % of
No. Content Hours Weightage
Introduction to Engineering Graphics:
1. Introduction to drawing instruments and accessories.
2. Types of lines, dimensioning and plane scale as per BIS–SP 46.
3. Draw polygons with various methods.
1. (In Exam, specific method not to be asked. Students can draw 04 10
polygon by any method.)
Engineering Curves:
1. Applications of Engineering Curves, Construction of Conical
curves.
2. Drawing of cycloidal Curves, Involutes and Spirals.
2. 05 20
(In Exam, specific method not to be asked. Students can draw
thesecurves by any method.)
Projections of Points and Lines:
1. Introduction to principal planes of projections, Projections of
points. 05
3. 2. Projections of line with its inclination to HP and VP, True
20
length.
Projections of Planes:
1. Inclination of square, hexagonal and circular plane with
4. reference planes. 04 10

w.e.f. 2024-25 http://syllabus.gtu.ac.in/ P a g e 2 of 4

 GUJARAT TECHNOLOGICAL UNIVERSITY
Program Name: Diploma in Engineering
Level: Diploma
Branch: Power Electronics /Automation & Robotics / Civil Engineering/ Environmental
Engineering /Mining Engineering / Ceramic Technology / Chemical Engineering
/Metallurgy Engineering/Plastics Engineering/Mechanical Engineering /Mechanical
Engineering (CAD/CAM) /Automobile Engineering / Fabrication Technology /
Mechatronics Engineering / Textile Processing Technology
Course / Subject Code : DI01000111
Course / Subject Name : Engineering Graphics
Orthographic Projections:
1. Projections from the pictorial view of the object.
2. Draw front, top and side views of simple objects.
5. 3. Free hand sketches of simple geometrical shapes like square, 06 20
triangle, circle, semi-circle, hexagon and pentagon.
Isometric view:
1. Isometric view of simple objects and Isometric scale.
6. 2. Free hand sketches of simple objects like prism, pyramid, 06 20
cylinder and cone.
Total 30 100

Suggested Specification Table with Marks (Theory):

Distribution of Theory Marks (in %)

R Level U Level A Level N Level E Level C Level

10 20 40 30

Where R: Remember; U: Understanding; A: Application, N: Analyze and E: Evaluate C: Create (as per
Revised Bloom’s Taxonomy)

References/Suggested Learning Resources:

(a) Books:
1. A text book of Engineering Drawing by P.S.Gill, S.K.Kataria & sons, Delhi.
2. Elementary Engineering Drawing by N.D.Bhatt Charotar Publishing House, Anand.

(b) Open source software and website:

1. https://www.youtube.com/c/MechanicalEnggSubjectsGTU/playlists
2. https://youtube.com/playlist?list=PL5Rqb_WO7qVy2-
6FluBrQcJh rXvyOxe&si=pgqq5RO0ZLGU5J1G

Suggested Course Practical List:

1. Use of drawing instruments (Types of lines, dimensioning, scale as per BIS, Angles, polygons)
2. Drawing of Conical curves (Ellipse, parabola, hyperbola)
3. Drawing of spiral, involute and cycloidal curves
w.e.f. 2024-25 http://syllabus.gtu.ac.in/ P a g e 3 of 4
 GUJARAT TECHNOLOGICAL UNIVERSITY
Program Name: Diploma in Engineering
Level: Diploma
Branch: Power Electronics /Automation & Robotics / Civil Engineering/ Environmental
Engineering /Mining Engineering / Ceramic Technology / Chemical Engineering
/Metallurgy Engineering/Plastics Engineering/Mechanical Engineering /Mechanical
Engineering (CAD/CAM) /Automobile Engineering / Fabrication Technology /
Mechatronics Engineering / Textile Processing Technology
Course / Subject Code : DI01000111
Course / Subject Name : Engineering Graphics
4. Projections of points and line
5. Projections of plane
6. Draw orthographic projections of given isometric view
7. Draw Isometric view of given orthographic projection
All the problems must be draw in sketch book and then in drawing sheet of A2 size. Draw both sides,
if needed.

List of Laboratory/Learning Resources Required:

Drawing paper, scale, 0.5 mm H and 2H lead pencil, angle protector, set square, etc.
Suggested Project List:
Student have to prepare a chart showing real applications of topics discussed in this subject.
Suggested Activities for Students:
Draw free hand sketch of any object around you. Draw isometric view and orthographic view, both.

*******

w.e.f. 2024-25 http://syllabus.gtu.ac.in/ P a g e 4 of 4