Scribd
Upload
18 views3 pages

Lab Friction Lab #2- Basic

The document outlines a lab experiment to measure the coefficient of friction between two materials using static and kinetic methods. It includes a detailed procedure for measuring forces, data collection tables, and questions for analysis and conclusions about friction. The experiment aims to understand the differences between static and kinetic friction and their real-life applications.

Uploaded by

Christopher Preece
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
18 views3 pages

Lab Friction Lab #2- Basic

The document outlines a lab experiment to measure the coefficient of friction between two materials using static and kinetic methods. It includes a detailed procedure for measuring forces, data collection tables, and questions for analysis and conclusions about friction. The experiment aims to understand the differences between static and kinetic friction and their real-life applications.

Uploaded by

Christopher Preece
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Friction Lab #2: Physics

Purpose: To measure the coefficient of friction between two materials, using two different methods.

Materials: – you write

General Concepts and pre-lab questions:


There are a few ways to measure the coefficient of friction. First, you must know the definition of the
coefficient. It is the ratio of the force of friction between two objects that are in contact and the normal force.
Therefore, you must figure out a way to measure those two variables, and then calculate the ratio. You must
determine whether you are going to measure the static or the kinetic coefficient of friction. Static friction
opposes the movement of objects so this must be measured as the maximum force (on the spring scale) under
which the object does not move. Kinetic Friction occurs as the object is being moved across the table. This
force is measured as the maximum force (on the spring scale) when the object is moving at a constant
velocity.

1. The static coefficient is abbreviated ____________, while the kinetic is abbreviated __________

2. The formula for calculating the coefficient of static friction is _________________________

3. The formula for calculating the coefficient of kinetic friction is ________________________

Hypothesis: Which coefficient of friction do you expect to be lower, static or kinetic? Why?

Procedure:

1. Measure the mass of an object which is to be pulled or dragged along another surface and convert the
g to kg
2. Use a spring scale (use the unit “pounds” or “lb”) to measure the maximum static horizontal force
which can be applied before the object starts to slide. Record the force, and the units your scale uses.
3. Use the spring scale (in “lbs”) to measure the force which is required to drag the object at a slow
constant speed along the horizontal surface. This is equal to the kinetic friction. Record the pulling
force, including units.
4. Increase the normal force between the surfaces by adding mass (200-500g) on top of the dragged
object.
5. Repeat steps 2 and 3, recording the pulling forces.
6. Repeat steps 4, 2, and 3, three more times, for a total of 5 dragged masses.
7. If time, pick another set of surfaces and repeat this experiment in the 2nd data table
Data and Results Table: (Dark-bordered cells are for raw lab data. Other cells are results, which can be
calculated after data collection is complete.)

Surfaces:
Mass (kg) Weight of Max static Max static Constant Constant Static Kinetic
(including the object pulling force pulling force kinetic pulling kinetic coefficient of coefficient of
any added being (Include units!) (pounds force pulling force friction μs friction μk
mass) dragged converted to (Include units!) (converted to
(N) Newton’s) Newton’s)

Surfaces:
Mass (kg) Weight of Max static Max static Constant Constant Static Kinetic
(including object pulling force pulling force kinetic pulling kinetic coefficient of coefficient of
any added being (Include units!) (Newton’s) force pulling force friction μs friction μk
mass) dragged (Include units!) (Newton’s)
(N)

Data calculations:
8. Calculate the weight of the moving mass to get your Fn
9. Convert the pounds of force into Newton’s of force
10. Use your data and your equations to calculate the coefficients for static and kinetic friction

Lab Questions:
1) Was your hypothesis correct? Explain.

2) Draw and label a free body diagram showing the forces acting on the object as it sits on the table at rest.

3) Draw and label a free body diagram showing the forces acting on the object as it slides across the table

4) Calculate the average static and kinetic coefficients of friction between the surfaces you selected.

5) If a crate with a mass of 68.0kg were sitting on a level surface, and the crate and surface materials were
the ones you used for lab, calculate the maximum static and kinetic horizontal frictional forces (use your
average coefficients!)

6) How much horizontal applied force would be necessary to accelerate the crate at 0.78 m/s 2?

Conclusions:

Explain in regular words what the coefficient of friction is. Explain the difference between static and kinetic
friction. Give multiple real life scenarios in which it is important to know the coefficient of friction. State a
few ways to increase frictional force, and a few ways to decrease it, in those real life scenarios.

You might also like