Artham

Resource Material
For Session 2024-25

Best Notes
CBSE
CLASS 9
SCIENCE
100% updated Quick Revision,
as per 2023-24 tips, notes &
curriculum. mind maps.

To the point Easily

Answers Understandable &
effective language.
PHYSICS
Chapter 11: Sound
 SOUND
12

Sound
• Sound is a form of mechanical energy which produces the sensation of hearing.
• It is produced due to vibrations of different objects. It travels in the form of waves.
• Sound is a form of energy which produces a sensation of hearing in our ears.
Introduction to waves

A wave is a disturbance in a medium which moves from one point to another and carries energy
without a net movement of particles. It may take the form of elastic deformation or a variation of
pressure.
E.g: Rubber cork on the water that goes up and down when a rock falls in the water creates a ripple.
Propagation of Sound

• A material medium is necessary for the propagation of sound. It can be solid, liquid or gas.
(2)
 SOUND
12

• The disturbance which moves through a medium when the particles of the medium set the
neighbouring particles into motion is known as a wave.
• A sound wave can be considered the propagation of pressure or density variations in the
medium, i.e. it propagates in a medium as a series of compressions and rarefactions.
• A region of compressed air (increased density or pressure) is called a compression (C) and
that of rarefied air (decreased density or pressure) is called a rarefaction (R).
• A vibrating object produces a series of compressions and rarefactions in the medium.

Example: When the prongs of a tuning fork move forward, compression is formed, and when the
prongs move backwards, rarefaction is formed.
• As sound propagates, it is the sound energy which travels in the medium and not the
particles of the medium.
• Sound waves are longitudinal waves as the particles of the medium through which the
wave propagates vibrate in a direction parallel to the direction of propagation of waves.
There are many types of waves like mechanical waves, electromagnetic waves, matter waves.
Mechanical Wave:
Mechanical wave is periodic disturbances which require material medium like solid, liquid and
gas for its propagation.

(3)
 SOUND
12

Some examples of mechanical waves includes

• Sound waves
• Water waves
• Waves produced in stretched string
• Waves produced in slinky or a long string
There are two types of mechanical waves
Transverse wave: In these waves the individual particles of the medium move in a direction
perpendicular to the direction of propagation of the disturbance. The particles do not move
from one place to another, but they simply oscillate back and forth about their position of rest

Longitudinal wave: In these waves the individual particles of the medium move in a direction
parallel to the direction of propagation of the disturbance. The particles do not move from one
place to another, but they simply oscillate back and forth about their position of rest
Sound waves are longitudinal waves as in sound waves, particles moves in a direction parallel
to the direction of propagation of the disturbance.

(4)
 SOUND
12

Introduction to sound waves

Sound needs a medium to propagate. The matter or material through which sound propagates
is called a medium. When particles vibrate about their mean positions, it pushes a region of
compressed air, creating a region of high pressure, followed by a region of low pressure as the
particle retreats to its mean position. The sound wave propagates by compressions and
rarefactions of particles in a medium. Sound propagation can be visualised as the propagation
of pressure variations in the medium.
Characteristics of Sound Waves
Wavelength
The distance between two successive crests or troughs (or) successive compressions and
rarefactions is called as wavelength (λ). The SI unit of wavelength is metre (m).

Time period
Time taken by two consecutive compressions or rarefactions to cross a fixed point is called a
Time period (T). The SI unit of time in seconds (s).
Frequency
The number of compressions or rarefactions per unit time is called frequency (𝛎).
The SI unit of frequency is Hertz. The SI unit is Hertz (s−1)
1
𝑣=
𝑇
Speed (v), wavelength (λ) and frequency (𝛎) are related as v=λ𝛎
Amplitude
(5)
 SOUND
12

The magnitude of disturbance in a medium on either side of the mean value is called an
amplitude (A).
As shown in the figure below, the unit of amplitude will be the density or pressure. Distance
between mean position and crest (maximum displacement).

Pitch
The number of compressions or rarefactions per unit time. Directly proportional to frequency.

Representation of low and high pitch

Volume
Volume or loudness of a sound depends on the amplitude. The force with which an object is
made to vibrate gives the loudness.
Higher force → higher amplitude → louder sound
The amount of sound energy flowing per unit time through a unit area is called the intensity of
sound.

(6)
 SOUND
12

The Intensity of Sound

Note and Tone
A sound of a single frequency is called a tone. A sound produced with a mixture of several
frequencies is called a note.
Quality of sound
The richness or timber of sound is called the quality. Sound with the same pitch and loudness
can be distinguished based on the quality. Music is pleasant to the ears while noise is not. But
they both can have the same loudness and pitch.
Speed of sound
Sound travels through different media with different speeds. Speed of sound depends on the
properties of the medium: pressure, density and temperature
Speed of sound: Solids > Liquids > Gases
Speed of sound in air = 331 m/s at 00C and 344 m/s at 22∘ C
When a source emits sound with a speed greater than the speed of sound in air, it creates a
sonic boom which produces shockwaves with lots of energy. They produce a very loud noise
which is enough to shatter glass and damage buildings.
Reflection of Sound Waves

(7)
 SOUND
12

Like light, sound also follows laws of reflection, it bounces off the surface of solid and liquid.
Echo
The phenomenon where a sound produced is heard again due to reflection is called an echo.
E.g: Clapping or shouting near a tall building or a mountain.
To hear distinct echo sound, the time interval between original and reflected sound must be at
least 0.1s. As sound persists in our brain for about 0.1s. Minimum distance for obstruction or
reflective surface to hear an echo should be 17.2 m. Multiple echoes can be heard due to
multiple reflections.
Sonar and Radar

SONAR – Sound Navigation And Ranging.

It is a technique that uses sound or ultrasonic waves to measure distance. The human range of

(8)
 SOUND
12

hearing is 20Hz- 20kHz.

What are Ultrasonic sounds?

Ultrasonic sounds are high-frequency sound having a frequency greater than 20kHz (inaudible
range).
Applications of Ultrasound
(i) Scanning images of human organs
(ii) Detecting cracks in metal blocks
(iii) Cleaning parts that are hard to reach
(iv) Navigating, communicating or detecting objects on or under the surface of the water
(SONAR).
Sonar consists of a transmitter and detector mounted on a boat or ship. The transmitter sends
ultrasonic sound waves to the seabed which gets reflected back and picked up by the detector.
Knowing the speed of sound in water, distance can be measured using: 2d = v × t. This method
is called echolocation or echo ranging.
(9)
 SOUND
12

Reverberation

Persistence of sound because of multiple reflections is called reverberation. Examples:

Auditorium and a big hall.
Excessive reverberation is undesirable and to reduce this, halls and auditoriums have sound-
absorbing materials on the walls and roofs. E.g: Fibreboard and rough plaster.
Doppler’s effect

If either the source of sound or observer is moving, then there will be a change in frequency
and wavelength for the observer. The frequency will be higher when the observer moves
(10)
 SOUND
12

towards the source and it decreases when the observer moves away from the source.
Example: If one is standing on a street corner and an ambulance approaches with its siren
blaring, the sound of the siren steadily gains in pitch as it comes closer and then, as it passes,
the pitch suddenly lowers.
Variations in Pressure and Density of a Medium due to Sound
Waves
• The variations of pressure and density when a sound wave moves in a medium are as shown
below:
• The portion of the medium where density (or pressure) has a value larger than its average value is
called a crest.
• The portion of the medium where density (or pressure) has a value smaller than its average
value is called a trough.
• The magnitude of maximum disturbance in the medium on either side of the mean position
is called the amplitude (A).
• When a sound propagates through a medium, the density of the medium oscillates
between a maximum value and a minimum value.
• The change in density (or pressure) from the maximum value to the minimum value and
again to the maximum value is called an oscillation.
• The number of complete oscillations per second is called the frequency ( ν ) of the sound
wave. Its unit is hertz (Hz).
• The time taken for one complete oscillation in the density (or pressure) of the medium is
called the
time period (T) of the wave.
• The distance between two consecutive compressions or two consecutive rarefactions is called
wavelength (λ) of the wave. Its SI unit is metre (m).
• Frequency ( ν ) and time period (T) are related as

• Speed of sound is the distance travelled by the sound wave per unit time.

• The relation between the speed of sound wave (v), its frequency () and
wavelength ( λ ) is v =  λ
(11)
 SOUND
12

Sound, travels as a wave

• From the previous section we have already established that sound is produced
by vibrating objects. Term vibration refers to the rapid to and fro motion of an
object.
• If we throw a piece of stone in a pond of still water then expanding circle of
ripples or water waves are formed over the surface of water. These water waves
moves on an outward direction on the surface of water.
• This happens because when stone hits water surface it disturbs the particles of
water surface. As a result water particles began to vibrate about their means
positions.
• These vibrating particles collide with the neighboring particles and make them
vibrate.
• This process continues and the disturbance travels through the water.
• The disturbance travel in water due to the repeated periodic motion of the
particles of water about their mean positions.
Speed of Sound in Different Media
• Speed of sound is finite and is much less than the speed of light.
• Speed of sound in solids > speed of sound in liquids > speed of sound in gases
• The speed of sound increases with increase in temperature.
Characteristics of Sound
• Sounds can be distinguished from each other by three characteristics—loudness (intensity),
pitch (frequency) and quality (timbre).
• The intensity of sound at any point is the amount of sound energy passing per unit time per unit

Loudness

Characteristics of sound Pitch

Quality

area in a direction perpendicular to the area. Its unit is watt/metre2 (W/m2).

• The physiological response of the ear to the intensity of sound is called loudness. It is
(12)
 SOUND
12

determined by the amplitude of the wave.

• Pitch is the physiological sensation which helps in distinguishing a shrill sound from a flat
sound. It is determined by the frequency of the wave.
• Quality (timbre) distinguishes one sound from another sound of the same pitch and
loudness. It is determined by the wave form of the sound.
• A sound of single frequency is called a tone.
• The sound produced by a mixture of several frequencies is called a note.
Reflection of Sound
• The laws of reflection for sound are the same as those for light.
• The repetition of sound caused by reflection of sound waves from an obstacle is known as an
echo.
• The time interval between the original sound and the reflected one must be at least 0.1 s
for an echo to be heard distinctly.
• Multiple echoes are heard when sound is repeatedly reflected from several obstacles at
suitable distances.
• The phenomenon of persistence or prolongation of audible sound after the source has
stopped emitting it is called reverberation.
Uses of Multiple Reflection of Sound
• In megaphones, horns, musical instruments and stethoscopes, the mechanism of multiple
reflection of sound is used.
Sound needs a medium to travel
• Sound cannot travel through vacuum.
• This is because when sound travels from one place to another then energy is transferred from
one particle to another particle of the medium.
• This means that sound needs a material medium like solid, liquid or gas for its propagation.
• Visit this link for demonstration that shows sound waves cannot travel through vacuum.
Range of Frequencies

(13)
 SOUND
12

Audible range • 20 Hz to 20,000 Hz

Ultrasound • Above 20 kHz

Infrasound • Below 20 Hz

Applications of Ultrasound
• Ultrasound finds applications in industry, medical science and communication (SONAR).
• SONAR stands for Sound Navigation And Ranging. It is used to measure the distance,
direction and speed of objects under the sea. It is also used in ship-to-ship communication.
Human Ear
The human ear can be divided into three parts:

✓ The outer ear which collects the sound waves.

✓ The middle ear which amplifies the sound waves about 60 times.
✓ The inner ear which converts the amplified sound energy into electrical energy and
conveys it to the brain as nerve impulses for interpretation.
Range of Hearing
• Audible sounds are those that can be heard while inaudible sounds are those that cannot
be heard.
• Human can hear sounds with frequency between 20Hz and 20,000Hz.

(14)
 SOUND
12

• Low frequency sounds which cannot be hear are called infrasonic.

• Rhinoceroses communicate using infrasound of frequency as low as 5 Hz. Whales and
elephants produce sound in the infrasound range. It is observed that some animals get
disturbed before earthquakes. Earthquakes produce low-frequency infrasound before the
main shock waves begin which possibly alert the animals
• Objects that vibrate at frequencies of above 20,000Hz produce sound which also cannot be
heard by us. Such sounds are called.
ultrasonics
Ultrasound is produced by dolphins, bats and porpoises.
Human Ear Parts
The human ear parts are explained below:
External Ear
The external ear is further divided into the following parts:
Auricle (Pinna)
The auricle comprises a thin plate of elastic cartilage covered by a layer of skin. It consists of
funnel-like curves that collect sound waves and transmits them to the middle ear. The lobule
consists of adipose and fibrous tissues supplied with blood capillaries.
External Auditory Meatus
It is a slightly curved canal supported by bone in its interior part and cartilage in the exterior
part. The meatus or the canal is lined with stratified epithelium and wax glands.
Tympanic Membrane
This membrane separates the middle ear and the external ear. This part receives and amplifies
the sound waves. Its central part is known as the umbo.
Middle Ear
The middle ear comprises the following parts:
Tympanic Cavity
It is a narrow air-filled cavity separated from the external ear by tympanic membrane and
from inner ear by the bony wall. The tympanic cavity has an auditory tube known as the
eustachian tube in its anterior wall.
Eustachian Tube
The eustachian tube is a 4cm long tube that equalizes air pressure on either side of the
tympanic membrane. It connects the tympanic cavity with the nasopharynx.
(15)
 SOUND
12

Ear Ossicles
These are responsible for transmitting sound waves from the eardrum to the middle ear.
There are three ear ossicles in the human ear:
Malleus: A hammer-shaped part that is attached to the tympanic membrane through the
handle and incus through the head. It is the largest ear ossicle.
Incus: An anvil-shaped ear ossicle connected with the stapes.
Stapes: It is the smallest ossicle and also the smallest bone in the human body.
Inner Ear
It comprises two parts:
Bony labyrinth
Membranous labyrinth
Bony Labyrinth
The bony labyrinth comprises a vestibule, three semi-circular canals, and spirally coiled
cochlea. It is filled with perilymph.
Membranous labyrinth
The bony labyrinth surrounds the membranous labyrinth. It comprises sensory receptors
responsible for balance and hearing. The membranous labyrinth is filled with endolymph and
comprises three semi-circular ducts, cochlear duct, saccule and utricle. The sensory receptors
include cristae, an organ of corti, and ampullaris maculae.
Function of Ear
Following are the important function of the ear:
Hearing
The mechanism of hearing involves the following steps:
• The sound waves pass through the auditory canal and reach the eardrum.
• The vibrations produced pass through the tympanic membrane to the tympanic cavity.
• The ear ossicles in the tympanic cavity receive the vibrations and the stapes pushes the
oval window in and out.
• This action is passed on to the organ of corti, the receptor of hearing, that contains tiny
hair cells that translate the vibrations into an electrical impulse that are transmitted to the
brain by sensory nerves.
Balance
(16)
 SOUND
12

The eustachian tube and the vestibular complex are the important parts of the ear responsible
for the balance.
• The eustachian tube equalizes the air pressure in the middle ear and maintains the balance.
• The vestibular complex contains receptors that maintain body balance.

(17)
 SOUND
12

(18)
 SOUND
12

Important Question
➢ Multiple Choice Questions:
1. Note is a sound
(a) of mixture of several frequencies
(b) of mixture of two frequencies only
(c) of a single frequency
(d) always unpleasant to listen
2. A key of a mechanical piano struck gently and then struck again but mush harder this time. In
the second case
(a) sound will be louder but pitch will not be different
(b) sound will be louder and pitch will also be higher
(c) sound will be louder but pitch will be lower
(d) both loudness and pitch will remain unaffected
3. In SONAR, we use
(a) ultrasonic waves
(b) infrasonic waves
(c) radio waves
(d) audible sound waves
4. Sound travels in air if
(а) particles of medium travel from one place to another
(b) there is no moisture in the atmosphere
(c) disturbance moves
(d) both particles as well as disturbance travel from one place to another.
5. When we change feeble sound to loud sound we increase its
(a) frequency
(b) amplitude
(c) velocity
(d) wavelength
6. In the curve half the wavelength is

(19)
 SOUND
12

(a) AB
(b) BD
(c) DE
(d) AE
7. Earthquake produces which kind of sound before the main shock wave begins
(a) ultrasound
(b) infrasound
(c) audible sound
(d) none of the above
8. Infrasound can be heard by
(a) dog
(b) bat
(c) rhinoceros
(d) human beings
9. Before playing the orchestra in a musical concert, a sitarist tries to adjust the tension and
pluck the string suitably. By doing so, he is adjusting
(a) intensity of sound only
(b) amplitude of sound only
(c) frequency of the sitar string with the frequency of other musical instruments
(d) loudness of sound
➢ Very Short Question:
1. What are longitudinal waves?
2. What are transverse waves?
3. Define wavelength. What is its symbol and its SI unit?
4. Define frequency. What is its symbol and its SI unit?
5. What is one hertz?
6. Define amplitude. What is its symbol and its SI unit?
(20)
 SOUND
12

7. What is ‘audible’ sound?

8. What do you mean by an echo?
9. What do you understand by the terms “compression” and rarefaction?
A region of low pressure of a medium when a sound wave travels through it is called
rarefaction.
10. What do you understand by the pitch of a sound?
➢ Short Questions:
1. State law of conservation of energy and law of conservation of mechanical energy.
2. Define (a) 1 joule (b) 1 watt.
3. Write down SI unit of the following quantities.
(a) work
(b) kinetic energy
(c) potential energy
(d) power
4. What is the sequence of energy change that takes place in the production of electricity from
adam?
5. A light and a heavy object have the same momentum. Find out the ratio of their kinetic
energies. Which one has larger kinetic energy?
6. Why a man does not do work when he moves on a level road while carrying a box on his
head?
7. If an electric iron of 1200 W is used for 30 minutes every day, find electric energy consumed
in the month of April.
8. What is work done by a force of gravity in the following cases?
(a) Satellite moving around the Earth in a circular orbit of radius 35000 km.
(b) A stone of mass 250 g is thrown up through a height of 2.5 m.
➢ Long Questions:
1. State the conditions for positive, negative, and zero work. Give at least one example of
each.
2. Give a reason for the following:
(a) A bullet is released on firing the pistol.
(b) An arrow moves forward when released from the stretched bow.
(c) Winding the spring of a toy car makes it to run on the ground.

(21)
 SOUND
12

(d) Falling water from a dam generates electricity.

(e) Winding the spring of our watch, the hands of the watch movement.
3. State the law of conservation of energy. Show that the energy of a freely falling body is
conserved.
➢ Assertion Reason Questions:
1. For two statements are given- one labelled Assertion (A) and the other labelled Reason (R).
Select the correct answer to these questions from the codes (a), (b), (c) and (d) as given
below:
a. Both Assertion and Reason are correct, and reason is the correct explanation for
assertion.
b. Both Assertion and Reason are correct, and Reason is not the correct explanation for
Assertion.
c. Assertion is true but Reason is false.
d. Both Assertion and Reason are false.
Assertion: When any objects vibrates that time it produces sound.
Reason: Vibration means a kind of rapid to and from motion of an object.
2. For two statements are given- one labelled Assertion (A) and the other labelled Reason (R).
Select the correct answer to these questions from the codes (a), (b), (c) and (d) as given
below:
a. Both Assertion and Reason are correct, and reason is the correct explanation for
assertion.
b. Both Assertion and Reason are correct, and Reason is not the correct explanation for
Assertion.
c. Assertion is true but Reason is false.
d. Both Assertion and Reason are false.
Assertion: When any objects vibrates that time it produces sound.
Reason: vibration is the process in which two objects strikes on each other.
➢ Case Study Questions:
1. Sound is produced by vibrating objects. The matter or substance through which sound is
transmitted is called a medium. It can be solid, liquid or gas. Sound moves through a medium
from the point of generation to the listener. When an object vibrates, it sets the particles of the
medium around it vibrating. The particles do not travel all the way from the vibrating object to
the ear. Sound waves are characterized by the motion of particles in the medium and are called
mechanical waves. When a vibrating object moves forward, it pushes and compresses the air in
front of it creating a region of high pressure; this region is called a compression(C).When the
(22)
 SOUND
12

vibrating object moves backwards, it creates a region of low pressure called rare faction (R).
Hence sound is longitudinal wave.
(i) Sound waves are:
(a) Mechanical waves
(b) Electromagnetic wave
(c) Transverse waves
(d) None of these
(ii) Sound travel in medium with:
(a) Compression and rare fraction
(b) Crest and trough
(c) Both can be possible
(d) None of these
(iii) Compression is the region of:
(a) High pressure
(b) Low pressure
(c) Medium pressure
(d) None of these
(iv) What is sound and how is it produced?
(v) Why sound wave is called as longitudinal wave?
2. The individual particles of the medium move in a direction parallel to the direction of
propagation of the disturbance. The particles do not move from one place to another but they
simply oscillate back and forth about their position of rest. This is exactly how a sound wave
propagates; hence sound waves are longitudinal waves. There is also another type of wave,
called a transverse wave. In a transverse wave particles do not oscillate along the direction of
wave propagation but oscillate up and down about their mean position as the wave travels.
Thus, a transverse wave is the one in which the individual particles of the medium move about
their mean positions in a direction perpendicular to the direction of wave propagation.
(i) Sound waves are:
(a) Transverse waves
(b) Longitudinal wave
(c) Both a and b
(d) None of these
(ii) Light is:

(23)
 SOUND
12

(a) Transverse waves

(b) Longitudinal wave
(c) Both a and b
(d) None of these
(iii) In case of Longitudinal waves:
(a) The particles do not move fromone place to another but they simply oscillateback and
forth about their position of rest
(b) The particles move fromone place to another
(c) The particles move up and down.
(d) None of these
(iv) When stone is dropped in water; waves are generated of which types?
(v) Differentiate between longitudinal wave and transverse waves.
✓ Answer Key-
➢ Multiple Choice Answers:
1. (c) of a single frequency
2. (a) sound will be louder but pitch will not be different
3. (c) radio waves
4. (d) both particles as well as disturbance travel from one place to another.
5. (b) amplitude
6. (b) BD
7. (a) ultrasound
8. (c) rhinoceros
9. (c) frequency of the sitar string with the frequency of other musical instruments
➢ Very Short Answers:
1. Answer: A wave in which the particles of the medium vibrate back and forth in the ‘same
direction’ in which the wave is moving, is called as a longitudinal wave.
2. Answer: A wave in which the particles of the medium, vibrate up and down ‘at right angle’
to the direction in which the wave is moving, is called a transverse wave.
3. Answer: The distance between two consecutive compressions (C) or two consecutive
rarefactions (R) is called the wavelength. The wavelength is denoted by (Greek letter
‘lambda’). Its SI unit is the meter (m).
4. Answer: The number of complete waves (or cycles) produced per second is called a
(24)
 SOUND
12

frequency of sound waves. It is denoted by f. The SI unit of frequency is hertz (Hz).

5. Answer: A vibrating body producing 1 wave per second is said to have a frequency of 1 Hz.
6. Answer: The magnitude of the maximum disturbance in the medium on either side of the
mean value is called the amplitude of wave. It is denoted by A. The SI unit is the metre (m).
7. Answer: The sound which we are able to hear is called ‘audible’ sound. The audible range of
sound for human beings extends from about 20 Hz to 20000 Hz.
8. Answer: The repetition of sound caused by the reflection of sound waves is called an ‘echo’.
9. Answer: A region of high pressure of a medium when a sound wave travels through it is
called compression.
A region of low pressure of a medium when a sound wave travels through it is called
rarefaction.
10.Answer: Pitch of a sound is the characteristic of sound that depends on the frequency
received by a human ear.
➢ Short Answers:
Answer: The sensation felt by our ears is called sound. A sound is a form of energy which
makes us hear. When an object is set into vibrations, the sound is produced. For example,
the vibrating diaphragm of a drum produces sound, the vibrating string of a guitar produces
sound, the vibrating diaphragm of speakers of a radio produce sound, the vibrating end of a
drilling machine produces sound, etc.
Answer: The conditions to hear an echo are:
1
i. Echo can be heard only if it is produced at least th of a second (0.1 s) after the original
10
sound.
ii. The speed of sound in air is 344 m/s. Let us calculate the minimum distance from the
reflecting surface, which is necessary to hear an echo.

1
∴ Distance travelled = 344 x = 34.4 metres
10
1
Thus, the distance travelled by the sound in th of a second is 34.4 m. This means that the
10
minimum distance between the source of the sound and the listeners should be 17.2
metres.
iii. Echo can be heard only if the reflecting surface is large.
(25)
 SOUND
12

Answer: Bats search out prey and fly in the dark night by emitting and detecting reflections
of ultrasonic waves. The high-pitched ultrasonic squeaks of the bat are reflected from the
obstacles or prey and returned to bat’s ear. The nature of reflections tells the bat where the
obstacle or prey is and what it is like.
Answer: A certain amount of reverberation improves the quality of sound of orchestral and
choral music. However excessive reverberation makes the speech or music indistinct.
Answer: A megaphone works on the principle of reflection of sound. In this instrument, a
tube followed by a conical opening reflects sound successively to guide most of the sound
from the source in the forward direction towards the audience.
Answer:
Given,
velocity of sound, υ = 340 m/s

7. 30 waves pass through a point in 3 seconds. If the distance between two crests is 2 m.
Calculate
(a) frequency
(b) wavelength.
Answer:
30 waves in 3 seconds
30
υ= = 10Hz
3
∴ λ = 2m.
8. What is the reflection of sound? State the laws of reflection.
Answer: The bouncing back of sound from a hard surface is called a reflection of sound. The
laws of reflection are:
i. The incident sound wave, the reflected sound wave and the normal at the point of
incidence, all lie in the same plane.
ii. The angle of incidence of sound is always equal to the angle of reflection of sound.

(26)
 SOUND
12

➢ Long Answers:
1. Answer:
i. Megaphone and a bulb horn: Megaphones or loudhailers, horns, musical instruments such
as trumpets and she Hana is, are all designed to send sound in a particular direction without
spreading it in all directions, as shown in the figure. In these instruments, a tube followed by
a conical opening reflects sound successively to guide most of the sound waves from the
source in the forward direction towards the audience.

ii. Stethoscope: Stethoscope is a medical instrument used for listening to sounds produced
within the body, chiefly in the heart or lungs. In stethoscopes, the sound of the patient’s
heartbeat reaches the doctor’s ears by multiple reflections of sound, as shown in the figure.

iii. Soundboard: Generally the ceiling of concert halls, conference halls and cinema halls are
curved so that sound after reflection reaches all corners of the hall, as shown in the figure.
Sometimes a curved soundboard may be placed behind the stage so that the sound, after
reflecting from the soundboard, spreads evenly across the width of the hail (Fig).
(27)
 SOUND
12

2. Answer:
Ultrasounds are high-frequency waves. Ultrasounds are able to travel along well-defined
paths even in the presence of obstacles. Ultrasounds are used extensively in industries and
for medical purposes.
i. Ultrasound is generally used to clean parts located in hard-to-reach places, for example,
spiral tube, odd-shaped parts, electronic components, etc. Objects to be cleaned are placed
in a cleaning solution and ultrasonic waves are sent into the solution. Due to high frequency,
the particles of dust, grease and dirt get detached and drop out. The objects thus get
thoroughly cleaned.
ii. Ultrasounds can be used to detect cracks and flaws in metal blocks. Metallic components
are generally used in the construction of big structures like buildings, bridges, machines and
also scientific equipment. The cracks or holes inside the metal blocks, which are invisible
from outside reduces the strength of the structure.
Ultrasonic waves are allowed to pass through the metal block and detectors are used to
detect the transmitted waves. If there is even a small defect, the ultrasound gets reflected
back indicating the presence of the flaw or defect.
iii. Ultrasonic waves are made to reflect from various parts of the heart and form the image
of the heart. This technique is called ‘echocardiography’.
vi. An ultrasound scanner is an instrument which uses ultrasonic waves from getting images
of internal organs of the human body. A doctor may image the patient’s organs such as liver,
gall bladder, uterus, kidney, etc. It helps the doctor to detect abnormalities, such as stones
in the gall bladder and kidney or tumours in different organs.
In this technique, the ultrasonic waves travel through the tissues of the body and get
reflected from a region where there is a change of tissue density. These waves are then
converted into electrical signals that are used to generate images of the organ.
These images are then displayed on a monitor or printed on a film. This technique is called
‘ultrasonography’. Ulträsonography is also used for examination of the foetus during
pregnancy to detect congenital defects and growth abnormalities.
v. Ultrasound may be employed to break small ‘stones’ formed in the kidneys into fine
(28)
 SOUND
12

grains. These grains later get flushed out with urine.

➢ Assertion Reason Answer:
1. (b) Both Assertion and Reason are correct, and reason is not the correct explanation for
assertion.
2. (a) Both Assertion and Reason are correct, and reason is the correct explanation for
assertion.
➢ Case Study Answers:
1.
(i) (a) Mechanical waves
(ii) (a) Compression and rare fraction
(iii) (a) High pressure
(iv) Sound is vibrations created by object. When body vibrates, it forces the adjacent particles
of the medium to vibrate. This results in disturbance in the medium, which travels as waves an
reaches the ear hence sound is produced.
(v) The vibration of medium that travels parallel to direction of wave or along in the direction of
the wave is called longitudinal wave. The direction of particles of medium vibrates parallel to
direction of propagation of disturbance. Therefore a sound is called longitudinal waves.
2.
(i) (b) Longitudinal wave
(ii) (a) Transverse waves
(iii) (a) The particles do not move from one place to another but they simply oscillate back and
forth about their position of rest
(iv) When stone is dropped in water. Waves are generated where water particles are moving up
and down and propagated away from dropping point .hence this is sign of transverse waves.
Hence transverse waves are produced when stone is dropped in water.
(v) Following are differentiated points:

No Longitudinal waves Transverse waves

The medium, in the case of

The medium, in case of a transverse
a longitudinal wave, moves
1 wave, moves perpendicular to wave
in the same way to wave
direction
direction

2 This wave is made up of This wave is made up of crests and

(29)
 SOUND
12

compressions and troughs

rarefactions

example of a longitudinal An example of a transverse wave is

3
wave is sound wave the Light

(30)
CLICK TO DOWNLOAD MORE CHAPTERS
Dear Teachers and Students,

Join School of Educators' exclusive WhatsApp, Telegram, and Signal groups for FREE access
to a vast range of educational resources designed to help you achieve 100/100 in exams!
Separate groups for teachers and students are available, packed with valuable content to
boost your performance.

Additionally, benefit from expert tips, practical advice, and study hacks designed to enhance
performance in both CBSE exams and competitive entrance tests.

Don’t miss out—join today and take the first step toward academic excellence!

Join the Teachers and Students

Group by Clicking the Link Below
JOIN OUR
WHATSAPP
GROUPS
FOR FREE EDUCATIONAL
RESOURCES
JOIN SCHOOL OF EDUCATORS WHATSAPP GROUPS
FOR FREE EDUCATIONAL RESOURCES
We are thrilled to introduce the School of Educators WhatsApp Group, a
platform designed exclusively for educators to enhance your teaching & Learning
experience and learning outcomes. Here are some of the key benefits you can
expect from joining our group:

BENEFITS OF SOE WHATSAPP GROUPS

Abundance of Content: Members gain access to an extensive repository of

educational materials tailored to their class level. This includes various formats such
as PDFs, Word files, PowerPoint presentations, lesson plans, worksheets, practical
tips, viva questions, reference books, smart content, curriculum details, syllabus,
marking schemes, exam patterns, and blueprints. This rich assortment of resources
enhances teaching and learning experiences.

Immediate Doubt Resolution: The group facilitates quick clarification of doubts.

Members can seek assistance by sending messages, and experts promptly respond
to queries. This real-time interaction fosters a supportive learning environment
where educators and students can exchange knowledge and address concerns
effectively.

Access to Previous Years' Question Papers and Topper Answers: The group
provides access to previous years' question papers (PYQ) and exemplary answer
scripts of toppers. This resource is invaluable for exam preparation, allowing
individuals to familiarize themselves with the exam format, gain insights into scoring
techniques, and enhance their performance in assessments.
 Free and Unlimited Resources: Members enjoy the benefit of accessing an array of
educational resources without any cost restrictions. Whether its study materials,
teaching aids, or assessment tools, the group offers an abundance of resources
tailored to individual needs. This accessibility ensures that educators and students
have ample support in their academic endeavors without financial constraints.

Instant Access to Educational Content: SOE WhatsApp groups are a platform where
teachers can access a wide range of educational content instantly. This includes study
materials, notes, sample papers, reference materials, and relevant links shared by
group members and moderators.

Timely Updates and Reminders: SOE WhatsApp groups serve as a source of timely
updates and reminders about important dates, exam schedules, syllabus changes, and
academic events. Teachers can stay informed and well-prepared for upcoming
assessments and activities.

Interactive Learning Environment: Teachers can engage in discussions, ask questions,

and seek clarifications within the group, creating an interactive learning environment.
This fosters collaboration, peer learning, and knowledge sharing among group
members, enhancing understanding and retention of concepts.

Access to Expert Guidance: SOE WhatsApp groups are moderated by subject matter
experts, teachers, or experienced educators can benefit from their guidance,
expertise, and insights on various academic topics, exam strategies, and study
techniques.

Join the School of Educators WhatsApp Group today and unlock a world of resources,
support, and collaboration to take your teaching to new heights. To join, simply click
on the group links provided below or send a message to +91-95208-77777 expressing
your interest.

Together, let's empower ourselves & Our Students and

inspire the next generation of learners.

Best Regards,
Team
School of Educators
 Join School of Educators WhatsApp Groups

You will get Pre- Board Papers PDF, Word file, PPT, Lesson Plan, Worksheet, practical
tips and Viva questions, reference books, smart content, curriculum, syllabus,
marking scheme, toppers answer scripts, revised exam pattern, revised syllabus,
Blue Print etc. here . Join Your Subject / Class WhatsApp Group.

Kindergarten to Class XII (For Teachers Only)

Class 1 Class 2 Class 3

Class 4 Class 5 Class 6

Class 7 Class 8 Class 9

Class 10 Class 11 (Science) Class 11 (Humanities)

Class 11 (Commerce) Class 12 (Science) Class 12 (Humanities)

Class 12 (Commerce) Kindergarten

Subject Wise Secondary and Senior Secondary Groups
(IX & X For Teachers Only)
Secondary Groups (IX & X)

SST Mathematics Science

English Hindi-A IT Code-402

Hindi-B Artificial Intelligence

Senior Secondary Groups (XI & XII For Teachers Only)

Physics Chemistry English

Mathematics Biology Accountancy

Economics BST History

 Geography Sociology Hindi Elective

Hindi Core Home Science Sanskrit

Psychology Political Science Painting

Vocal Music Comp. Science IP

Physical Education APP. Mathematics Legal Studies

Entrepreneurship French IT

Artificial Intelligence

Other Important Groups (For Teachers & Principal’s)

Principal’s Group Teachers Jobs IIT/NEET

 Join School of Educators WhatsApp Groups

You will get Pre- Board Papers PDF, Word file, PPT, Lesson Plan, Worksheet, practical
tips and Viva questions, reference books, smart content, curriculum, syllabus,
marking scheme, toppers answer scripts, revised exam pattern, revised syllabus,
Blue Print etc. here . Join Your Subject / Class WhatsApp Group.

Kindergarten to Class XII (For Students Only)

Class 1 Class 2 Class 3

Class 4 Class 5 Class 6

Class 7 Class 8 Class 9

Class 10 Class 11 (Science) Class 11 (Humanities)

Class 11 (Commerce) Class 12 (Science) Class 12 (Humanities)

Class 12 (Commerce) Artificial Intelligence

(VI TO VIII)
Subject Wise Secondary and Senior Secondary Groups
(IX & X For Students Only)
Secondary Groups (IX & X)

SST Mathematics Science

English Hindi IT Code

Artificial Intelligence

Senior Secondary Groups (XI & XII For Students Only)

Physics Chemistry English

Mathematics Biology Accountancy

Economics BST History

 Geography Sociology Hindi Elective

Hindi Core Home Science Sanskrit

Psychology Political Science Painting

Music Comp. Science IP

Physical Education APP. Mathematics Legal Studies

Entrepreneurship French IT

AI IIT/NEET CUET
Groups Rules & Regulations:
To maximize the benefits of these WhatsApp groups, follow these guidelines:

1. Share your valuable resources with the group.

2. Help your fellow educators by answering their queries.
3. Watch and engage with shared videos in the group.
4. Distribute WhatsApp group resources among your students.
5. Encourage your colleagues to join these groups.

Additional notes:
1. Avoid posting messages between 9 PM and 7 AM.
2. After sharing resources with students, consider deleting outdated data if necessary.
3. It's a NO Nuisance groups, single nuisance and you will be removed.
No introductions.
No greetings or wish messages.
No personal chats or messages.
No spam. Or voice calls
Share and seek learning resources only.

Please only share and request learning resources. For assistance,

contact the helpline via WhatsApp: +91-95208-77777.
 Join Premium WhatsApp Groups
Ultimate Educational Resources!!

Join our premium groups and just Rs. 1000 and gain access to all our exclusive
materials for the entire academic year. Whether you're a student in Class IX, X, XI, or
XII, or a teacher for these grades, Artham Resources provides the ultimate tools to
enhance learning. Pay now to delve into a world of premium educational content!

Click here for more details

Class 9 Class 10 Class 11

Class 12

📣 Don't Miss Out! Elevate your academic journey with top-notch study materials and secure
your path to top scores! Revolutionize your study routine and reach your academic goals with
our comprehensive resources. Join now and set yourself up for success! 📚🌟

Best Wishes,

Team
School of Educators & Artham Resources
 SKILL MODULES BEING OFFERED IN
MIDDLE SCHOOL

Artificial Intelligence Beauty & Wellness Design Thinking & Financial Literacy
Innovation

Handicrafts Information Technology Marketing/Commercial Mass Media - Being Media

Application Literate

Data Science (Class VIII Augmented Reality /

Travel & Tourism Coding
only) Virtual Reality

Digital Citizenship Life Cycle of Medicine & Things you should know What to do when Doctor
Vaccine about keeping Medicines is not around
at home

Humanity & Covid-19 Blue Pottery Pottery Block Printing

 Food Food Preservation Baking Herbal Heritage

Khadi Mask Making Mass Media Making of a Graphic

Novel

Kashmiri Embroidery Satellites

Rockets
Embroidery

Application of Photography
Satellites
SKILL SUBJECTS AT SECONDARY LEVEL (CLASSES IX – X)

Retail Information Technology Automotive

Security

Introduction To Financial Introduction To Tourism Beauty & Wellness Agriculture

Markets

Food Production Front Office Operations Banking & Insurance Marketing & Sales

Health Care Apparel Multi Media Multi Skill Foundation

Course

Artificial Intelligence
Physical Activity Trainer Electronics & Hardware
Data Science
(NEW)

Foundation Skills For Sciences Design Thinking & Innovation (NEW)

(Pharmaceutical & Biotechnology)(NEW)
 SKILL SUBJECTS AT SR. SEC. LEVEL
(CLASSES XI – XII)

Retail InformationTechnology Web Application Automotive

Financial Markets Management Tourism Beauty & Wellness Agriculture

Food Production Front Office Operations Banking Marketing

Health Care Insurance Horticulture Typography & Comp.

Application

Geospatial Technology Electrical Technology Electronic Technology Multi-Media

 Taxation Cost Accounting Office Procedures & Shorthand (English)
Practices

Shorthand (Hindi) Air-Conditioning & Medical Diagnostics Textile Design

Refrigeration

Salesmanship Business Food Nutrition &

Design
Administration Dietetics

Mass Media Studies Library & Information Fashion Studies Applied Mathematics
Science

Yoga Early Childhood Care & Artificial Intelligence Data Science

Education

Physical Activity Land Transportation Electronics & Design Thinking &

Trainer(new) Associate (NEW) Hardware (NEW) Innovation (NEW)
 Join School of Educators Signal Groups

You will get Pre- Board Papers PDF, Word file, PPT, Lesson Plan, Worksheet, practical
tips and Viva questions, reference books, smart content, curriculum, syllabus,
marking scheme, toppers answer scripts, revised exam pattern, revised syllabus,
Blue Print etc. here . Join Your Subject / Class signal Group.

Kindergarten to Class XII

Class 2 Class 3
Class 1

Class 5 Class 6
Class 4

Class 7 Class 8 Class 9

Class 10 Class 11 (Science) Class 11 (Humanities)

Class 11 (Commerce) Class 12 (Science) Class 12 (Humanities)

Class 12 (Commerce) Kindergarten Artifical intelligence

 Subject Wise Secondary and Senior Secondary
Groups IX & X

Secondary Groups (IX & X)

SST Mathematics Science

Hindi-B
English Hindi-A

IT Artifical intelligence
IT Code-402

Senior Secondary Groups XI & XII

Physics Chemistry English

Biology Accountancy
Mathematics

BST History
Economics
 Geography Sociology Hindi Elective

Hindi Core Home Science Sanskrit

Psychology Political Science Painting

IP
Vocal Music Comp. Science

Physical Education APP. Mathematics Legal Studies

IIT/NEET
Entrepreneurship French

Artifical intelligence CUET

 Join School of Educators CBSE Telegram Groups

Kindergarten

All classes Class 1 Class 2

Class 3 Class 4 Class 5

Class 6 Class 7 Class 8

Class 9 Class 10 Class 11 (Sci)

Class 11 (Com) Class 11 (Hum) Class 12 (Sci)

Class 12 (Com) Class 12 (Hum) JEE/NEET

CUET NDA, OLYMPIAD, NTSE Principal Professional Group

Teachers Professional Group Project File Group

Join School of Educators ICSE Telegram Groups

Kindergarten Class 1 Class 2

Class 3 Class 4 Class 5

Class 6 Class 7 Class 8

Class 9 Class 10 Class 11 (Sci)

Class 11 (Com) Class 11 (Hum) Class 12 (Sci)

Class 12 (Com) Class 12 (Hum)