Scribd
Upload
118 views1 page

Ah86 F6145he1a05

The document provides performance specifications for the 8/6 AH horizontal pump, indicating that the performance curve is based on clear water and adjustments are necessary for other media. It includes details on impeller and seal suitability, frame ratings, and operational parameters such as RPM and flow rates. Additionally, it notes the right of Weir Minerals to change performance data and provides revision history and material specifications.

Uploaded by

gxm7396
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views1 page

Ah86 F6145he1a05

The document provides performance specifications for the 8/6 AH horizontal pump, indicating that the performance curve is based on clear water and adjustments are necessary for other media. It includes details on impeller and seal suitability, frame ratings, and operational parameters such as RPM and flow rates. Additionally, it notes the right of Weir Minerals to change performance data and provides revision history and material specifications.

Uploaded by

gxm7396
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Horizontal Pump

8/6 AH
CURVE SHOWS APPROXIMATE PERFORMANCE FOR CLEAR WATER (International Test Standard ISO9906:1999 - Grade 2 unless otherwise specified). For media other than water,
corrections must be made for density, viscosity and/or other effects of solids. WEIR MINERALS reserves the right to change pump performance and/or delete impellers without notice. Frame
suitability must be checked for each duty and drive arrangement. Not all frame alternatives are necessarily available from each manufacturing centre.
90 1400 rpm 30% Pump
40% VOLUTE LINER F6110LF1
50% Discharge 152mm
55% IMPELLER AND CENTRIFUGAL SEAL SUITABILITY
60% SHOULD BE CHECKED FOR EACH DUTY Suction 203mm
Impeller
65%
80 Vanes 4
1300 rpm Vane ø 540mm
Type Closed
Part No Material
70 F6145HE1 Metal

1200 rpm 70% Frame (Rating - KW)


E 120
EE 225
60 F 260
IEN CY

R 300
1100 rpm
FFX 425

NPSHr
EF FIC

FF 425
65%
Head, H (m)

50 S 560
1000 rpm SX 560
Seal

40 Gland Sealed Pump


900 rpm Liner (Norm Max r/min)
Polymer 1065
Metal 1400

6m
30 800 rpm
Min Passage Size

35mm
700 rpm
Curve
20 Revision 1
4m

600 rpm Revision Notes


IMPELLER PART NO WAS
3m

500 rpm MK121703B VOLUTE LINER PART


10 NO WAS F6110-2
1.5m

Reference TEST 133


2m

Issued Jun 92
© 3/2013 Weir Minerals Australia (PTC)
All Rights Reserved
100 200 300 400 500 600 700 800 TYPICAL PUMP PERFORMANCE CURVE

Flow Rate, Q (m³/hr) WPA86A09A/1

You might also like