Technical Data Sheet
• Reliable Protection
Shell Morlina S2 BL 22 •
•
Long Oil Life
High Speed Applications
Special Application Bearing & Circulating Oils
Shell Morlina S2 BL 22 is a special low viscosity mineral oil blended with zinc free additives, to provide extended
performance in the high speed spindles of machine tools.
Performance, Features & Benefits Main Applications
· Long oil life – Maintenance saving
Shell Morlina S2 BL oils are formulated with a proven
rust and oxidation inhibitor package that provides high
resistance to oxidation, especially in hot and wet
environments. They are also very resistant to breakdown
· Machine bearing and circulating systems
Suitable for a range of machine lubrication systems that
from metal catalysts, such as copper. These characteristics include oil lubricated plain and rolling element bearings.
·
prolong oil life and lower maintenance costs.
Reliable wear & corrosion protection
· High speed spindles
The Morlina S2 BL product line features lower viscosity fluids
The well-balanced additive package also provides efficient that are particularly suitable for the lubrication of high speed
anti-wear performance without reacting to the softer metals spindles in machine tools.
in bearings, which enhances machine reliability.
Specifications, Approvals & Recommendations
In addition the additive package enhances the oil’s natural
corrosion protective properties and helps to prolong bearing · Five Group Cincinnati P-45 (Light Spindle Oils)
Shell Morlina S2 BL oils are designed to meet specifications
life.
· Maintaining system efficiency
The low viscosity components in these oils have been
requiring a premium quality, light viscosity oil for applications
running at high speeds such as those found in high speed
frames and automated machine tools.
chosen to help promote the smooth running of high speed
For a full listing of equipment approvals and
machine elements and minimize heat buildup through
recommendations, please consult your local Shell Technical
frictional energy losses.
Helpdesk.
Typical Physical Characteristics
Properties Method Morlina S2 BL 22
Kinematic Viscosity @40 C 0
mm /s 2 ASTM D445 22
Kinematic Viscosity @100 C 0
mm2/s ASTM D445 4.4
Viscosity Index ASTM D2270 105
Density @150C kg/m3 ISO 12185 854
Flash Point (COC) 0
C ASTM D92 210
Pour Point 0
C ASTM D5950 -33
Total Acid Number mg KOH/g ASTM D664 0.15
Rust, Salt Water ASTM D665B Pass
Water Separability @540C minutes ASTM D1401 10 (40/40/0)
4-ball Wear Scar 1hr/540C/1800 mm ASTM D2266 0.45
rpm/20 kg
Page 1 of 2 Morlina S2 BL 22 (2016), v 1.2 23.08.2021.09.19
Properties Method Morlina S2 BL 22
Copper Corrosion 3 hours @ Rating ASTM D130 1a
1000C
Oxidation Control Test : TOST Hrs to TAN=2.0 ASTM D943 3 000
minimum
Oxidation Control Test : RPVOT minutes ASTM D2272 1 150
These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.
Health, Safety & Environment
· Health & Safety
This product is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.
Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
Guidance on Health and Safety is available on the appropriate Safety Data Sheet, which can be obtained from
https://www.epc.shell.com
· Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
Additional Information
· Advice
Advice on applications not covered here may be obtained from your Shell representative.
Page 2 of 2 Morlina S2 BL 22 (2016), v 1.2 23.08.2021.09.19
