N32SQ PLUS
Precautions Before using this product, please read this User Manual carefully and keep it well
Keep the monitor away from water sources or damp places, such as bath rooms, kitchens,
basements and swimming pools.
Make sure the monitor is placed on a flat surface. If the monitor falls down, it may cause
human injury or device damage.
Store and use the monitor in a cool, dry and well ventilated place, and keep it away from
emission and heat sources.
Do not cover or block the vent hole in the rear casing, and do not use the product on a bed,
sofa, blanket or similar objects.
The range of the supply voltage of the monitor is printed on the label on the rear casing.
If it is impossible to determine the supply voltage, please consult the distributor or local
power company.
If the monitor will not be used for a long period, please cut off the power supply to avoid
electric shock in rainy days and damage due to abnormal supply voltage.
Please use a reliable grounded socket, Do not overload the socket, or it may cause fire or
electric shock.
Do not put foreign matters into the monitor, or it may cause short circuits resulting fire or
electric shock.
Do not disassemble or repair this product by self to avoid electric shock. If faults occur,
please contact the after-sales service directly.
Do not pull or twist the power cable forcedly.
There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel
it off, or the product may be damaged and the warranty will be invalid.
Package Content
Packing list
Please check that the package of the monitor contains all parts. If any part is lost, please contact
the distributor.
The color and shape of parts may vary with models. Figures in this User Manual are for reference only.
Cables supplied may vary with purchased products. Figures in this User Manual are for reference only.
Monitor Stand Stem Stand Base Mount adapter
Screws x4 Screws x3 Mount Stud x 4
1 PM4x12 2 KM4x12 3 PM4x16
Power Cable DP Cable User Manual
Redundant screws can be used as spare screws.
Installation
Installation of base
1. First open the carton, take out the foam and align the table top, after taking out the inner packaging, put
the body on the foam. Press the lock vertically by hand to remove the hinge assembly.
2. Use 2 screws to lock the shaft assembly and bracket, and then lock 3 screws to the base.
Screws
2 KM4x12
1 PM4x12 Screws
3. As above, vertically push the lock catch.Put stands assembly parts into slot of back coveraccordingly and
make them mechanically placed.Hold the middle of stand and make surethe monitor won't drop out.
4. After assembly, simply hold the stand with hand to stand the monitor upright.
Do not press the LCD
Note: During standing of the whole monitor, do not press the liquid crystal screen with hand to avoid
damage to the screen.
Installation of mount
1. Open the package, take out the product with foam still attached, and gently place it on a desktop or
table. Remove the extra parts and the foam covering the back of the monitor. If the monitor is already
attached to the stand, remove the stand.
2. If the stand was not installed, press the button to remove the stand plate.
Stand Plate
Button
3. Remove the original screws x4 from the opening in the back of the monitor and put them aside. Then
use the screws provided to attach the adapters inside the opening.
Original
Screws x 4
Screws x 4
3 PM4x16
4. Follow the directions received with your mount, stand, or accessory and install the monitor on the wall
or fixture as desired.
Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it fully.
Do not place or hang any object on the mount, and the using height of the mount should be less
than 2 meters.
Adjustment of monitor
10° 5°
Tilting angle
5°(+2°/-1°) - +10°(+3°/-1°)
Instructions
Description of buttons
M E LED
Button Function
M Menu button: Press to enter sub-menus/ quickly enter the main menu
Down button: Press to move down in the menu/quickly adjust the game crosshair
Up button: Press to move up in the menu/quickly adjust the contextual mode
E Exit/hot key: Press to return to the previous menu/quickly switch input signals of the port
Power button: Press to turn on/off the monitor
LED LED lndicator: Changes colors to indicate status.
Explanation of indicator light
Indicator
Indicator: A steady blue light indicates that the power is on and the monitor is operating normally. Blue light
flashes to indicate There is no video source and no horizontal or vertical signal or low voltage is detected.
Make sure your computer It is turned on and all video cables are fully plugged in and/or connected.
Cable connection:
* The bottom interface configuration at the back of the monitor varie with
products.
* Note: If the power cable or signal cable is damaged, you must replace it
with special soft cables or special components purchased from the
manufacture or maintenance department.
HDMI interface
Use the HDMI-DVI cable to connect the HDMI IN interface
Use the HDMI cable to connect the HDMI IN interface
of the product to the DVI OUT interface of a PC.
of the product to the HDMI OUT interface of a PC.
(In general, PCs do not transfer video signals to the
monitor through the DVI OUT interface , and it is
necessary to connect a loudspeaker box additionally to
play sounds of PCs.)
DP interface AUDIO OUT AC IN
Use the DP cable to Connect audio outputting Please connect the power
connect the DP IN interface devices such as earphones cable plug to the
of the product to the DP to the AUDIO OUT corresponding port of the
OUT interface of a PC. interface. monitor, and connect the
other end to a properly
grounded power outlet.
OR
OSD menu
Menu description
The color and shape of the OSD menu of the actual computer may be slightly different from them shown in the
figure.
Specifications of the OSD menu may change with improvements of functions without prior notice.
The screen display (OSD) menu can be used to adjust settings of the monitor and is shown on the screen after the
monitor is powered on and the button is pressed.
1. Press the button to activate the browser screen.
2560
144hz x
1440
Game Settings Standard Mode ON
Picture Settings RTS/RPG Mode OFF
Color Settings FPS Arena Mode OFF
PIP/PBP MOBA Arena Mode OFF
OSD Settings Adaptive-Sync OFF
Other Settings Shadow Balance 50
2.Press or to scroll through the functions.
- Select the desired function, and press to enter the sub-menu.
- Press or to scroll through sub-menus, and press key to select and confirm the desired function.
- Press or to select one option, and press to confirm settings and exit from the current menu.
3. Press to exit from the menu screen
* Functions of the monitor vary with models, and the functions in this manual are for reference only.
Standard Mode Off/On
RTS/RPG Mode Off/On
FPS Arena Mode Off/On
MOBA Arena Mode Off/On
Adaptive-Sync Off/On
Shadow Balance 0-100
Response Time Off/Normal/Fast/Ultrafast
Off/On
Refresh Rate
Position: Top Right/Top Left/Bottom Right/Bottom Left
Off
Game Settings Game Crosshair
On: Crosshair 1/Crosshair 2/Crosshair 3/Crosshair 4/Crosshair 5/Crosshair 6
Game Time Off
On: 15:00/30:00/45:00/60:00
Dynamic Brightness Off/Normal/Expert/Elaboration
MPRT Off/On
Ambient Lighting Off/On
Brightness 0-100
Contrast 0-100
DCR Off/On
Contextual Model Off
Picture Settings OnMovie Mode/Reading Mode/Night Mode
Low Blue Light 0-100
Sharpness 0-5
Gamma 1.8/2.0/2.2/2.4/2.6/ S.curve
Aspect Ratio Wide Screen/4:3/1:1/Auto
Warm Off/On
Natural Off/On
Cool Off/On
User1 Off/On
Color Settings
User2 Off/On
User3 Off/On
Hue R/G/B/C/M/Y: 0-100
Saturation R/G/B/C/M/Y: 0-100
* Functions of the monitor vary with models, and the functions in this manual are for reference only.
PIP/PBP mode Off/PIP Mode/PBP 2Win 1:1
Sub-Signal Source DP1/DP2/HDMI1/HDMI2
Audio Source Auto/DP1/DP2/HDMI1/HDMI2
PIP/PBP
PIP Position Top Right/Top Left/Bottom Right/Bottom Left
PIP Size Small/Medium/Large
Window Swap Off/On
简体中文/English/한국어/عربى/Portugues do
Brasilazil/Deutsch/Nederland/Suomi/Français/
Language Ελληνικά/Indonesia/Italiano/日本語/Malaysia/
Polskie/Português/Pусский/Españo/ไทย/
Українська/Tiếng Việt/繁体中文/Türkçe
OSD Time Out 5-60
OSD H-Position 0-100
OSD V-Position 0-100
OSD Transparency 0-5
OSD Settings
Hotkey1 Setting Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/
Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/
Dynamic Brightness
Hotkey2 Setting Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/
Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/
Dynamic Brightness
Hotkey3 Setting Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/
Refresh Rate/Game Time /Contextual Model/PIP/PBP Mode/Input Signal/
Dynamic Brightness
OSD Lock Off/On
Input Signal Auto/DP1/DP2/HDMI1/HDMI2
Volume 0-100
Mute Off/On
Other Settings Auto Power Off/On
Eyeshield Remind Off/On
Reset No/Yes
Information Input Source/Resolution/Mode
Basic parameters
Product name Liquid Crystal Display
Product model N32SQ PLUS
Screen size 31.5inch
Aspect ratio 16:9
Viewing angle 178°(H) / 178°(V)
Pixel pitch 0.2724(H)×0.2724(V)mm
Contrast ratio 3000:1(TYP)
Color 16.7M
Resolution 2560 x 1440
Refresh rate 144Hz
100-240V~ 50/60Hz 1.5A
Power supply The standard voltage and power supply may vary with countries, please
refer to the label at the back of the product.
Product Without stand 712.5x422.8x120.6mm
dimensions
With stand 712.5x508.5x245.1mm
Tilting angle Forward tilting-5°±2.0° ; Backward tilting15°±2.0°
Height range N/A
Rotation angle N/A
Temperature: 0°C~ 40°C (32°F ~ 104°F)
Action Humidity: 10%~90% RH (non-condensing)
Environmental
conditions Temperature: -20°~ 60° (-4°F ~ 140°F)
Storage
Humidity: 5%~95% RH (non-condensing)
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
“This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.”
