Positioning Aids for

Radiology
For all Modalities
The essentials

MRI
MULTIPAD P.18
Sand Bag P.32
PearlFit P.20
MR Safety Pad P.16

CT
CT HeadFix P.10
ProBelt P.22
PearlFit P.20
CT Table Cover P.12

X-Ray
PearlFit P.20
ProFoam P.26
ProBelt P.22
ProFoam Table Mat P.30

2
Product Overview

BabyFix
MR CT 6

CRANIA
MR 7

CT Gantry Cover
CT 8

CT HeadFix
CT 10

CT Table Cover
CT 12

FoamFit
MR 15

MR Safety Pad
MR 16

MULTIPAD
MR 18

PearlFit
MR CT XR 20

ProBelt
MR CT XR 22

ProFoam
MR CT XR 26

ProFoam Table Mat XR 30

Sandbag
MR CT XR 32

Accessories
MR CT 33

3
 Simple, standardised positioning
speeds up both frequent and infrequent
examinations – and thus alleviates time
pressure.

Comfortably positioned patients

undergo examinations calmly and
satisfied without complications.

Improved image quality and fewer

motion artifacts thanks to effective
immobilization.

4
 Durable Perfectly Hygienic High-quality
For a high patient Designed for regular High-frequency welded
throughput and tricky wipe disinfection even seams are built to last.
patient transfers. with 90% alcohol.

Swiss Quality For radiology ISO-certified

Designed and Tested for MR safety Medical device class 1
manufactured in and radiolucency. according to ISO 13485.
Switzerland.

We opted to work with Pearl Technology

in sourcing our positioning aids as a flexible
alternative across our MRI locations. The
products are good quality, with patients
finding them comfortable, as well as helping
us further support patient safety. Our staff
also love working with them as they are Dr. Darren Hudson,
MRI Clinical Lead at InHealth
easy to clean and durable.

5
BabyFix MR

CT
The BabyFix creates ideal conditions for a safe and careful examination pro-
cedure for newborn babies in MRI and CT. The positioning aid is
wrapped around the newborn and then vacuum-sealed. This hardens the
Babyfix to a cast form and enables pressure point-free and stable
positioning.

BabyFix Cocoon Art. 1107

Positioning aid for the immobilization of newborn babies
(2–5kg) in MRI and CT.

Dimensions: 75 x 40 cm

BabyFix XL Art. 1276

Positioning aid for immobilization of newborns (5-9 kg) in MRI
and CT.

Dimensions: 110 x 80 cm

Hand Vacuum Pump Art. buw-5355

Hand Vacuum-Pump is MR-compatible and can be used to
withdraw air from vacuum cushions.

Case study
6
CRANIA MR

The CRANIA products have been developed specifically for head scans and
promise optimal patient positioning for head measurements in MRI.
The CRANIA is inflated using a hand pump and the head is comfortably
fixed within the coil. The arrangement of the pearl chambers enables the
suppression of head movements in all three axes.

CRANIA Adult Art. 1001

The CRANIA Adult is specifically suitable for research orien-
ted head exams, such as fMRI/EEG.

CRANIA Child Art. 1004

The CRANIA Child is specifically suitable for pediatric head
exams with children older than 3 years.

7
CT Gantry Cover CT

The CT Gantry Covers are protective covers made of PU foil, which are
attached to the gantry with hook-and-loop patches to protect CTs from
liquids.

CT Gantry Cover for Canon

C33 Art. 1231
C307 Art. 1271
C308 Art. 1303
C202 Art. 1304

8
CT Gantry Cover for GE
G33 Art. 1305
G75 Art. 1306
G25 Art. 1307
G110 Art. 1308
33 Art. 1302

CT Gantry Cover for Philips

P60 Art. 1313
33 Art. 1302

CT Gantry Cover for Siemens

S90 Art. 1309
S47 Art. 1310
S100 Art. 1314
S80 Art. 1311
S30 Art. 1312
33 Art. 1302

Learn more
9
CT HeadFix CT

The CT HeadFix offers an integrated, quick and hygienic solution for head
fixation in the CT.
The side wings are inflated by means of a hand pump and the head is
thus held in a stable position. The CT HeadFix is compatible with the head
holders of all major manufacturers.

CT HeadFix Art. 1105

Inflatable immobilization aid for head fixation in CT head
holder.
Tip: works best with the Probelt 50 VL/VH (Page 25).

Learn more
10
CT

11
CT Table Cover CT

The CT Table Covers are protective sleeves made of PU foil and are available
for CT table covers from various manufacturers. The specially designed flaps
provide additional safety and the high-quality materials and workmanship
make the product hard-wearing and durable.

12
CT Table Cover for Canon
2090 mm mat length Art. 1164
2360 mm mat length Art. 1166
1790 mm mat length Art. 1165
1860 mm mat length Art. 1167
2070 mm mat length Art. 1168
400 mm table extension Art. 1169
310 mm table extension Art. 1175
170 mm table extension Art. 1280
200 mm table extension Art. 1281

CT Table Cover for GE

2050 G mm mat length Art. 1267
2170 G mm mat length Art. 1184
2720 G mm mat length Art. 1205
2580 G mm mat length Art. 1206
2100 G mm mat length Art. 1207
2630 G mm mat length Art. 1221
270 G mm table extension Art. 1185
370 G mm table extension Art. 1208

Next Page: - Philips

- Siemens
- Sinovision

Watch Video
13
 CT Table Cover for Philips
2220 P mm mat length Art. 1183
2320 P44 mm mat length Art. 1203
2100 P mm mat length Art. 1204
2450 P mm mat length Art. 1224
2580 P44 mm mat length Art. 1239
2700 P44 mm mat length Art. 1244
2140 P mm mat length Art. 1290

CT Table Cover for Siemens

2190 S mm mat length Art. 1177
2190 S46 mm mat length narrow Art. 1212
2170 S46 mm mat length thin Art. 1211
2400 S mm mat length Art. 1209
2400 S46 mm mat length narrow Art. 1223

CT Table Cover for Sinovision

1985 SV mm mat length Art. 1291

14
FoamFit MR

The FoamFit positioning aids are made of a soft foam and are welded into a
durable PU foil. Their flexibility and adaptability make them particularly suita-
ble for use inside the coil, where they provide optimal support between the
patient and the coil.

FoamFit Plate
13 x 8 x 2 cm Art. 1227
36 x 8 x 2 cm Art. 1228
28 x 18 x 1 cm Art. 1233
30 x 10 x 2 cm  Art. 1235
18 x 8 x 2 cm Art. 1236

FoamFit Wedge
18 x 11 x 5 cm Art. 1225
36 x 11 x 5 cm Art. 1226
5 x 16 x 7 cm Art. 1234

15
MR Safety Pad MR

The MR Safety Pad positioning aids

are made of a dimensionally stable
foam material and are welded into a
durable PU foil. The thin foam plate
prevents direct patient contact with
the gantry and thus reduces the risk
of burns.

16
ProFoam Plate 50x25x1 DSR Art. 1247

The ProFoam Plate is used to prevent skin-to-skin contact

and thus reduces the risk of burns.

Dimensions: 50 x 25 x 1 cm

ProFoam Plate 100x25x1 DSR Art. 1248

The ProFoam Plate prevents direct patient contact with the

gantry and thus reduces the risk of burns.

Dimensions: 100 x 25 x 1 cm

ProFoam MR Safety Pad Angel Art. 1301

The two connected wings on the sides prevent direct contact

with the gantry. The MR Safety Pad Angel can be placed
under the table mat and thus remains in position.

Watch Video
17
MULTIPAD Product Family MR

The universally applicable MULTIPAD product family enables optimum patient

positioning for all examinations with head and extremity coils.
The MULTIPAD is inflated using a hand pump, thus the patient is comfortably
fixed within the coil.

MULTIPAD Standard Art. 1012

MULTIPAD Standard
Dimensions: 17 x 6 cm, Variable Thickness: 2 – 5 cm

MULTIPAD Plus Art. 1022

MULTIPAD Plus
Dimensions: 17 x 11 cm, Variable Thickness: 2 – 5 cm
The MULTIPAD Plus is particularly suitable to fill larger gaps.

MULTIPAD Slim Art. 1071

MULTIPAD Slim
Dimensions: 17 x 9 cm, Variable Thickness: 1 – 3 cm
The MULTIPAD Slim is particularly suitable for situations where
space is limited.

18
 MULTIPAD Ear Art. 1104
Dimensions: 17 x 10 cm, Variable Thickness: 1 – 4 cm
The MULTIPAD Ear is perfect for immobilizing the patient‘s
head during MRI scans when using in-ear headphones or
earplugs.

MULTIPAD Bendy Art. 1108

Dimensions: 23 x 9 cm, Variable Thickness: 1 – 4 cm
The MULTIPAD Bendy is perfectly suited for a wide variety of
joint examinations, particularly those involving flex coils.

MULTIPAD Research Kit Art. 5004

Components:
MULTIPAD Ear, Bendy and Slim, MULTIPAD Cover.

Application tip:
Use Cover MULTIPAD (sanitary single-use) for
improved protection and patient comfort (see
Accessories, page 33). Watch Video

19
PearlFit MR

CT

XR

PearlFit positioning aids are initially soft and flexible, but become firm and
stable under body weight. Like a beanbag, they therefore minimize pressure
points and allow comfortable positioning of the patient. They can be used
for all radiological examinations inside and outside the examination area.

PearlFit Cushion
30 x 20 x 4 cm  Art. 1114
50 x 20 x 4 cm Art. 1124
50 x 30 x 7 cm  Art. 1115
50 x 30 x 10 cm  Art. 1116
50 x 50 x 5 cm  Art. 1142

PearlFit Wedge
26 x 25 x 7 cm Art. 1117
30 x 50 x 15 cm Art. 1138
56 x 50 x 25 cm  Art. 1132

PearlFit Roll
Ø = 18, L = 50 cm  Art. 1113

20
PearlFit Flex 3 Art. 1119
The PearlFit Flex 3, with a size of 90x50x7 cm can be used as
either a cushion, a wedge or roll and can therefore be used for
a broad range of examinations.

PearlFit Head/Neck Art. 1121

The PearlFit Head/Neck is used to support the patient‘s head
when lying in supine position.

PearlFit Forehead Art. 5005

The PearlFit Forehead consists of two components and is
used to support the patient‘s head in prone position.

Learn more

21
ProBelt MR

CT

XR

ProBelt is the first completely hook-and-loop-free belt system and allows a

perfectly hygienic fixation of patients on the imaging table.

MRI

CT

X-Ray

22
ProBelt for MRI MR

ProBelt for MRI

140 MRI P for Philips Art. 1219
140 MRI P Extension for Philips Art. 1240

200 U5 for Canon Art. 1259

200 R2 for GE Art. 1170
200 Extension for all ProBelt 200 Products Art. 1213

350 U5 for Canon Art. 1260

350 R2 for GE Art. 1214
350 Extension for all ProBelt 350 Products Art. 1217
Please contact us if you need belts to fit other
manufacturers.

Case study
23
ProBelt for CT & X-Ray CT

XR

ProBelt
200 R2 for GE and Philips Art. 1170
200 R3 for Siemens and Philips Art. 1171
200 T5 for Canon and Philips Art. 1172
200 J10 for Philips Art. 1241
200 Extension for all ProBelt 200 Products Art. 1213

350 R2 for GE and Philips Art. 1214

350 R3 for Siemens and Philips Art. 1215
350 T5 for Canon and Philips Art. 1216
350 J10 for Philips Art. 1242
350 Extension for all ProBelt 350 Products Art. 1217
The ProBelt belts are available in widths of 200 mm and
350 mm, are inserted into the dedicated table rail and
closed by means of a hook eyelet.

Watch Video

ProBelt 200 Thorax PFC* Art. 1173

The ProBelt Thorax System helps to fix the arms to
the patient‘s upper body and is especially used for
polytrauma and thoracic abdomen CT examinations.
* New version with optimized measurements
and blue PU-foil.

Watch Video
24
ProBelt Wrap

200 (L = 200 cm, B = 20 cm) Art. 1187

70 (L = 145 cm, B = 7 cm) Art. 1220
350 (L = 200 cm, B = 35 cm) Art. 1229
The ProBelt Wrap is placed underneath the mat and wrapped
around the patient for a proper stabilization. The ProBelt Wrap is
fastened with a hook eyelet.

Watch Video

ProBelt VL/VH

50 VL for Philips and Siemens Art. 5008

50 VH for GE Art. 5009
50 VL for Canon Art. 5012

ProBelt 50 VL/VH are attached to the CT cradle and wrapped

around the patient’s forehead. ProBelt 50 are compatible with
CT head holders of all common equipment manufacturers and
offer a quick and hygienic head stabilization.

Watch Video

25
ProFoam – soft MR

CT

XR

The ProFoam positioning aids are made of a soft foam material and are wel-
ded into a durable PU foil. They are available in the most common shapes
and sizes and are suitable for a wide range of applications.

ProFoam Plate
25 x 18 x 5 cm Art. 1150

ProFoam Wedge 45
18 x 25 x 12 cm Art. 1151
18 x 11 x 5 cm Art. 1153
36 x 25 x 12 cm Art. 1154
50 x 25 x 12 cm Art. 1193
60 x 25 x 12 cm Art. 1155

ProFoam Wedge 15 / 30
26 x 25 x 7 cm (15 Grad) Art. 1152
18 x 25 x 7 cm (15 Grad) Art. 1195
18 x 23 x 10 cm (30 Grad) Art. 1197

Despite intense wear and tear, and regular disinfection, the

ProFoam Materials stay intact, smooth, and perfectly hygienic.

26
ProFoam DS – stable/hard MR

CT

XR
The ProFoam positioning aids DS are made of a dimensionally stable foam
material and are welded into a durable PU foil. They are available in the most
common shapes and sizes and are suitable for a range of applications.

ProFoam Plate DS
25 x 18 x 5 cm Art. 1158
50 x 30 x 20 cm  Art. 1192

ProFoam Wedge 45 DS
18 x 25 x 12 cm Art. 1159
18 x 11 x 5 cm Art. 1161
36 x 25 x 12 cm Art. 1162
50 x 25 x 12 cm  Art. 1194
60 x 25 x 12 cm Art. 1163

ProFoam Wedge 15 / 30 DS
26 x 25 x 7 cm (15 Grad) Art. 1160
18 x 25 x 7 cm (15 Grad) Art. 1196
18 x 23 x 10 cm (30 Grad) Art. 1198

27
ProFoam Head CT

XR

The ProFoam Head positioning aids are made of a stable foam and are wel-
ded into a durable PU foil. They are available in two different shapes and are
suitable for the use in radiology.

ProFoam Head Art. 1245

The ProFoam Head is used as a head support when patients

are lying supine on the patient table.

Dimensions: 25 x 25 x 12 cm

ProFoam Head/Neck Art. 1246

The ProFoam Head/Neck is used as a head support when

patients are lying supine on the patient table and provide
additional support for the neck.

Dimensions: 24 x 22 x 10 cm

28
ProFoam Wedge Inclination CT

The ProFoam Wedge Inclination is used to position the head correctly within
the head coil of the CT. Thanks to an anti-slip foil on the underside, it remains
still. It is compatible with the head holder of all manufacturers.

ProFoam Wedge Inclination

15 degree Art. 1273
30 degree Art. 1274
40 degree Art. 1275

ProFoam Wedges Inclination Kit Art. 5018

Consisting of: ProFoam Wedge Inclination 15, 30 und 40

29
ProFoam Table Mat XR

The ProFoam Table Mats are made of a dimensionally stable foam material
and are welded into a durable PU foil. They are available in different
dimensions suitable for all standard examination tables.
The slippery version with handles makes the positioning of heavy patients
easy allowing ergonomic workflows.

Learn more
30
 ProFoam Table Mat (anti-slip)
200 x 55 x 3 DS Art. 1199
200 x 60 x 3 DS Art. 1293
200 x 70 x 3 DS Art. 1294
220 x 60 x 3 DS Art. 1296
220 x 70 x 3 DS Art. 1298
240 x 60 x 3 DS Art. 1299
240 x 70 x 3 DS Art. 1300

The top and bottom of the ProFoam Table Mat DS are made
of pure PU foil. Thanks to its anti-slip bottom side it stays in the
right position.

ProFoam Table Mat (Slippery)

200 x 55 x 3 DSR Art. 1201
200 x 60 x 3 DSRG with hand grips Art. 1249
200 x 70 x 3 DSRG with hand grips Art. 1251
220 x 60 x 3 DSRG with hand grips Art. 1295
220 x 70 x 3 DSRG with hand grips Art. 1297
240 x 60 x 3 DSRG with hand grips Art. 1282
240 x 70 x 3 DSRG with hand grips Art. 1284

The ProFoam Table Mat (DSR and DSRG) is made with

textile-reinforced PU foil on the bottom. It allows effortless
repositioning of the patient thanks to its sliding properties.
Attention: the dimensions are calculated without hand grips.
Add 5 cm on each side.

Slippery Anti-Slip

31
Sandbag MR

CT

XR

The Sandbag positioning aids are sandbags that are welded into a hard-we-
aring PU foil. They are available in common sizes and are suitable for a ran-
ge of applications.

Sandbag
40 x 20 cm, 3kg Art. 1261
30 x 20 cm, 2kg Art. 1262
24 x 18 cm, 1.25kg Art. 1263

32
Accessories MR

CT

The accessories are an ideal complement to the Pearltec positioning aids

and help to achieve the optimum in terms of hygiene, simple and fast work-
flows and stability in patient positioning.

Cover MULTIPAD Art. 1101

Bag of 100 pcs
Sanitary single-use cover for MULTIPAD product family.

Cover Headphones Art. 1106

Bag of 100 pcs
Sanitary single-use cover for headphones.

Hand Vacuum-Pump Art. buw-5355

The Hand Vacuum-Pump is MR-compatible and can be
used to withdraw air from vacuum cushions.

33
34
35
Pearl Technology AG
Wiesenstrasse 33
8952 Schlieren
+41 43 535 08 40
[email protected]
www.pearl-technology.ch

F41-035-EN Rev. 9.0