SHAHID
SHAHID
UTTAR PRADESH
PROJECT REPORT
ON
PLANNING AND DESIGNING OF GREEN BUILDING
Submitted for Partial fulfilment for Award of
Diploma
In
Civil Engineering
(2017-20)
PROJECT REPORT
ON
PLANNING AND DESIGNING OF GREEN BUILDING
By
Shahid Parvez
Nitish Kumar
Amir Suhel
Under the Guidance
Of
AMRISH BAJPAI
(Assistant Professor)
(S.I.T.M. BARABANKI)
SAGAR INSTITUTE OF TECHNOLOGY AND
MANAGEMENT
CERTIFICATE
This is to certify that the project entitled “planning and designing of
green building” submitted by SHAHID PARVEJ and his team in
partial fulfilment of the requirements for the award of diploma in
Civil engineering at the SITM an authentic work carried out by them
under my supervision and guidance.
To the best of my knowledge the matter embodied in the project has
not been submitted to any other university/institute for the award of
any degree or diploma.
(HEAD OF DEPARTMENT)
Department of polytechnic ,
S.I.T.M.
SAGAR INSTITUTE OF TECHNOLOGY AND
MANAGEMENT
BARABANKI.
DECLARATION
I have by declare that the project entitled “planning and designing of
green building” submitted by me in the fulfillment of the requirements
for the award of the Diploma in civil Engineering, to the SAGAR
INSTITUTE OF TECHNOLOGY AND MANAGEMENT, is record of my own
work carried under supervision and guidance of ER.PRASHANT
DWIVEDI of Civil Engineering SAGAR INSTITUTE OF TECHNOLOGY AND
MANAGEMENT.To the best of my knowledge this project has not been
submitted to this institute or any other University or institute for the
award of any degree or diploma.
SHAHID PARVEJ
NITISH KUMAR
AMIR SUHEL
ACKNOWLEDGEMENT
Shahid Parvez
Nitish Kumar
Amir Suhel
GREEN
BUILDING
OBJECTIVE
• Understanding the concept of Green Building Design.
A green building is an
environmentally sustainable
building, designed, constructed
and operated to minimize the
total environmental impacts.
Source- US
Environmental
protection
agency
T
Savings of Green Building
Average
savings of Savings
80
Green %
Buildings.
70
%
60
%
50 Savin
% gs
40
%
30
%
Energy Savings Carbon Savings Water use Savings
20 Waste cost Savings
%
10
%
0
%
Source-
USGBC
worldwi
de
survey
2009
Major Criteria
to achieve green element in
buildings
Energy
Efficiency
Water Material
Efficiency Efficiency
Energy Efficiency
Energy Efficiency can be achieved by, Energy Use
Using non-conventional and BuildingsIndustries Transporta
renewable sources of energy.
Reducing energy consumption.
Optimize energy performance. 28%
Use of alternative renewable sources of Power 39% such as Solar Power, Bio mass
In buildings, it is achieved by installing solar panels and photovoltaic, Solar w
33%
Source-Indian Pollution
Control Board Survey in
2008
Technologies
to Achieve Energy
Efficiency in Building
Passive Solar Building
Design
• Desi
gnin
g
and
orie
ntin
g
wind
ows,
walls
and
floor
s to
utiliz
e
direc
t sun
light.
• Using
direct
sunligh
t for
heatin
g in
winter
and
avoidin
g the
same
in
summe
r.
• Maximum use of natural
delighting for ventilation.
Solar Water Heating
• Photovo
ltaic
(PV)
Panel
converts
Solar
power
in to
useful
Electrici
ty
• These
PV
module
s can be
installed
on walls
and
rooftop
of
building
• Clean (eco-friendly) source of
electricity
• Reduce
s
consum
ption of
conven
tional
thermal
electrici
ty
• Proves to be economical in long
term
Material Efficiency
Pivot tubing
Rain water harvesting
Building Design
Site Location
• Address - TUNI
• Governing Authority - KDC
(Municipal
Corporation)
• Distance from nearest Railway Station= 350M
(Kalyan RS)
• Plot Area =
929.03Sq.m
• FSI (Floor Space Index) =1
• Transfer of Development Rights = 0.4
• Possible max. built-up area =
1300.65Sq.m
Design Requirements
• According to the available built-up
area of site, we have designed 3
storied building with 4 flats on
each floor of 2 BHK
• Building is designed for higher
middle class group of peoples
• Plan is designed according
to Green Building
Principles
Planning Principles Adopted
in Design
Source-
Ground Water Recharge
Source-
Eversmile pre-
fabrication
pvt.ltd.
High Volume Fly ash
Concrete
Source-
Eversmile pre-
fabrication
pvt.ltd.
Low VOC Paints
• These paints are comparatively more expensive
then ordinary paints but they are still preferable
because of there reasonable advantages.
• Low VOC paints reduces Ozone depletion and improves
indoor air quality
Source-
Archana Glass
Traders,
Kalyan
Structural Design
Structural Design
Overview
Certifications and
Guidelines
PLANNING AND DESIGNING OF GREEN BUILD
T
Certification Councils
International
LEED
LEED Gold
Silver 60-80
50-60 points
points
STADD-PRO
ANALYSIS
REPORT
STAAD.Pro Report
To: CIVIL ENGINEERING Fro SHAHID PARVEJ
m:
DEPARTMENT, NITISH KUMAR
S.I.T.M.
AMIR SUHEL
Copy Date 5/04/2020: Ref: Project report
to: :
14:00
Job Information
Engineer Checked
Name: PRASHANT DWIVEDI Er. Ravi Prakash Srivastava
Date: 5-Apr-17
Structure Type SPACE
FRAME
Number of Nodes 670 Highest Node 1666
Number of 1177 Highest Beam 3818
Materials
E Density
Mat Name
(kN/mm2) (kg/m3) (1/°K)
3 STEEL 205.000 0.300 7.83E 3 12E -6
4 STAINLESSSTEEL 197.930 0.300 7.83E 3 18E -6
5 ALUMINUM 68.948 0.330 2.71E 3 23E -6
6 CONCRETE 21.718 0.170 2.4E 3 10E -6
Thank You