2/18/2020 Air Maintenance Device with Adjustable Regulator for Fusible Plug Loops – Instrumentation and Control Engineering

Home
INSTRUMENTATION
China Manufacturer - Indoor Vacuum Circuit
| Forum | ToolPROCESS
| Contact Us
CONTROL  AUTOMATION
Breaker
CALIBRATION Tuesday,
ANIMATION 18 February
ELECTRICAL 2020,
QUIZ OPEN10:40:44
TOOLS am |VALVES
 
Manufacturer from China. KEMA type tested farady-electric.com

ANALYTICAL INSTRUMENTATION ANDROID TOOLS VIBRATION MEASUREMENT PLC HOW TO

INSTRUMENTATION  PROCESS CONTROL  AUTOMATION ANIMATION CALIBRATION ELECTRICAL QUIZ TOOLS

VALVES ANALYTICAL INSTRUMENTATION ANDROID TOOLS VIBRATION MEASUREMENT PLC HOW TO

Automation / Instrumentation Instrumentation Instrumentation

Industrial Robots|Design, Why select Intrinsic safety? 45 ISO standards for Indus
benefits of robots  October 10, 2019 Pipelines
 October 22, 2019  September 23, 2019

Murata Silicon Capacitors - Vertical capacitor up to

Search
250℃ OPEN
Wirebonding Silicon Capacitors Down to 0101, From pF to tens µF murata.com/Wirebonding Search … S

Air Maintenance Device with Adjustable Regulator for Fusible Plug POPULAR POST
Loops
Posted on : May 9, 2018 By Areej Basic troubleshooting of Electrical
components in MCC/Electrical
Control Panel/Switch Gear
 March 30, 2014  15 Comments

What is the difference between

control panel and MCC?
 May 26, 2011  12 Comments

P&ID (Piping and instrument

diagram) & PFD (Process flow
diagram).
 December 11, 2010
 12 Comments

What is a control panel?. What are

the components in a control panel?
 March 14, 2011  11 Comments
Instrumentation

Basic Concept of PLC (Programmable

Introduction logic controllers).
 September 23, 2012
Air Maintenance Device is a control unit that automatically regulates a continuous pressurized air (or nitrogen)  7 Comments
supply to a constant preset value. The standard configuration includes a field adjustable pressure regulator, to and
strainer and two spring loaded check valves. Additional options include Pressure Gauges, Pressure Switches /
Transmitters, Air Tank and Pressure Safety Valve (PSV). In this session we are going to discuss about such air
maintenance device and its working

What is the purpose of Air Maintenance Device?

Utility systems such as air and nitrogen systems are critical parts required to operate and maintain an industrial
plant environment. Although air is easily accessible, there are times when nitrogen must be manufactured at the site.

x
https://automationforum.co/air-maintenance-device-adjustable-regulator-fusible-plug-loops/ 1/4
2/18/2020 Air Maintenance Device with Adjustable Regulator for Fusible Plug Loops – Instrumentation and Control Engineering
The compressors must supply nitrogen and air throughout the plant. Instrumentation is required to monitor and x
INSTRUMENTATION  PROCESS CONTROL  AUTOMATION ANIMATION CALIBRATION ELECTRICAL QUIZ TOOLS VALVES
control these systems and must also be monitored by the emergency shutdown system Murata Silicon Capacitors
ANALYTICAL INSTRUMENTATION ANDROID TOOLS VIBRATION MEASUREMENT PLC HOW TO
Vertical capacitor up to 250℃

Working principle Wirebonding Silicon Capacitors Down to

0101, From pF to tens µF
murata.com

OPEN

Categories
 Analytical Instrumentation

 Android Tools

 Animation

 Automation

 Calibration

 Communication

 Control System

 control valve

 DCS
Components
(1) Pressure Supply Ball Valve  Displacement Measurement

(2) Spring Loaded Check Valves

 ebooks
(3) Pressure Regulator (PCV) Model 2PB
(4) Fixed Restriction Orifice
 Electrical
(5) Spring loaded N.C. Bypass Ball Valve
(6) Pressure switch/transmitter
 Flow Measurement
(7) Pressure gauges
 How to
The supply of air or nitrogen enters the air maintenance device through the ball valve of pressure supply [1] that
must be kept open at all times when the AMD is in automatic operation mode. For greater safety and convenience and  Humidity measurement
as protection against incorrect operation, AMD is equipped with a normally closed bypass valve (N.C) operated by
spring, ensuring an essential predetermined closed position, at the end of the pressurization of the system.  Instrumentation

To quickly fill the system for initial pressurization, the spring loaded bypass valve (N.C) [5] must be opened. Once the  Instrumentation Questions
required system pressure has been reached, release the handle of the NC bypass valve, which will automatically
return it to the closed position, allowing only restricted air flow to the system through the fixed restriction orifice [4]  Instrumentation Tools

. The twin check valves [2] retain the outlet pressure supply in case the air supply is interrupted. In this case, AMD
 interview questions
will maintain the air pressure in the system only for a limited period of time.

 Level Measurement
The pressure regulator [3] automatically maintains the system pressure at the preset value. The fixed restriction
orifice limits the flow of air in the system of fusible plugs to a value that is significantly lower than that which will be
 P&ID
exhausted when a fuse the release device is activated. Ensuring a sufficient pressure drop to activate low pressure
equipment such as deluge valves and alarm devices  PLC

 pressure

How to reset process after a service?  Pressure Measurement

1. Open the Supply Isolating valve and introduce air pressure to the inlet of the AMD.  Process Control
2. Verify that the inlet pressure gauge indicates a high and stable pressure.
3. Open the Bypass valve enough to slowly pressurize the complete system.  Temperature Measurement

x
https://automationforum.co/air-maintenance-device-adjustable-regulator-fusible-plug-loops/ 2/4
2/18/2020 Air Maintenance Device with Adjustable Regulator for Fusible Plug Loops – Instrumentation and Control Engineering
4. After the system pressure has stabilized to the required pressure, as shown by the outlet pressure gauge, release  temprature x
INSTRUMENTATION  PROCESS CONTROL  AUTOMATION ANIMATION CALIBRATION ELECTRICAL QUIZ TOOLS VALVES
the Bypass valve handle which will automatically return it to the closed position. The AMD is now ready for standby
service.  Tools
ANALYTICAL INSTRUMENTATION ANDROID TOOLS VIBRATION MEASUREMENT PLC HOW TO
 Uncategorized

 Valves
Areej
-- News Reporter  Vibration Measurement

 whatis

Murata Silicon Capacito

Vertical capacitor up to 250℃

Wirebonding Silicon Capacitors Down to

 Diaphragm Seal and Instrument Assembly Working of Pressure Reducing Valve  0101, From pF to tens µF
murata.com

OPEN
Leave a Reply rep

You must be logged in to post a comment.

Facebook Twitter Linkedin youtube Instagram

    
Like us on facebook Tweet us on twitter Join us on Linkedin Subscribe us on youtube Join us on instagram

Recent Post Random Post Recent Comments Quizzes

 Flow Measurement

x
https://automationforum.co/air-maintenance-device-adjustable-regulator-fusible-plug-loops/ 3/4
2/18/2020 Air Maintenance Device with Adjustable Regulator for Fusible Plug Loops – Instrumentation and Control Engineering

How to select an Introduction to  MOHAMMED-ECE on Documents  Level Measurement x

INSTRUMENTATION  PROCESS CONTROL  AUTOMATION ANIMATION CALIBRATION ELECTRICAL QUIZ TOOLS VALVES
actuator for valve? Tachogenerators and drawings, which is essential for
 Temperature Measurement
 No comment  No comment instrumentation engineer.
ANALYTICAL INSTRUMENTATION ANDROID TOOLS VIBRATION MEASUREMENT PLC HOW TO  Instrumentation - Quiz
 MOHAMMED-ECE on What are the
what is an isolation Basic Concept of PLC  Calibration Measurement
differences between circuit breaker
transformer and what (Programmable logic
are its advantages controllers). and fuse ?  Instrumentation - Control Sys
 No comment  7 Comments  MOHAMMED-ECE on E  Instrumentation Basics
book:Instrumentation construction
How to do Megger What is Solenoid Valve ?  Instrumentation Quiz - Powe
engineering.
test/insulation How it works? Generation
resistance for  No comment
 younik on Types of Valve
transformer?
 shepeerd siame on Level
 No comment Basics of Electric Transmitter Calibration – Zero
Motors for Beginners
Suppression and Zero elevation
Why transformer testing
 No comment
is needed and how to do
the maintenance of a
Condenser – basics
transformer
 No comment
 No comment

What is a piezoelectric
transducer and how
does it work
 No comment

Copyright © 2018 Automationforum Designed & Developed by Automatio


https://automationforum.co/air-maintenance-device-adjustable-regulator-fusible-plug-loops/ 4/4