Scribd
Upload
16 views

Module-02-Activity-Packet-Tracer

The document outlines a Packet Tracer activity focused on configuring advanced settings for a network consisting of a router, two switches, and four PCs. Key tasks include setting hostnames, passwords, IP addresses, and enabling password encryption, as well as configuring line console and VTY settings. The activity concludes with connectivity verification between devices on the same and different subnets.

Uploaded by

yvoalexis24
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

Module-02-Activity-Packet-Tracer

The document outlines a Packet Tracer activity focused on configuring advanced settings for a network consisting of a router, two switches, and four PCs. Key tasks include setting hostnames, passwords, IP addresses, and enabling password encryption, as well as configuring line console and VTY settings. The activity concludes with connectivity verification between devices on the same and different subnets.

Uploaded by

yvoalexis24
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Packet Tracer Activity: Advanced Network Device Configuration

Objective:

Configure advanced settings on network devices, including passwords, IP addressing, default


gateway parameters, line console and vty configurations, password encryption, and MOTD.

Topology:

Create a simple network with the following devices:

• 1 Router (R1) - Cisco 1941

• 2 Switches (S1, S2) - Cisco 2960

• 4 PCs (PC-A, PC-B, PC-C, PC-D) - PC/Laptop

Network Diagram:

+---------------+
| R1 |
+---------------+
|
|
v
+---------------+---------------+
| S1 | S2 |
+---------------+---------------+
| |
| |
v v
+---------------+ +---------------+
| PC-A | PC-B | | PC-C | PC-D |
+---------------+ +---------------+

Configuration Tasks:

1. Configure Router R1:

o Hostname: R1

o Password: cisco123

o Enable Secret Password: cisco123

o Encrypt Passwords: Yes

o MOTD: "Unauthorized access is strictly prohibited."

o Line Console Configuration:


▪ Password: console123

▪ Login: Enable

▪ Exec-timeout: 5 minutes

o Line VTY Configuration:

▪ Password: vty123

▪ Login: Enable

▪ Exec-timeout: 5 minutes

▪ Transport input: telnet ssh

o Interface Configuration:

▪ GigabitEthernet0/0: IP address 192.168.1.1, subnet mask 255.255.255.0

▪ GigabitEthernet0/1: IP address 192.168.2.1, subnet mask 255.255.255.0

o Default Gateway: Not applicable for router interfaces

2. Configure Switch S1:

o Hostname: S1

o Password: cisco123

o Enable Secret Password: cisco123

o Encrypt Passwords: Yes

o MOTD: "Unauthorized access is strictly prohibited."

o Line Console Configuration:

▪ Password: console123

▪ Login: Enable

▪ Exec-timeout: 5 minutes

o Line VTY Configuration:

▪ Password: vty123

▪ Login: Enable

▪ Exec-timeout: 5 minutes

▪ Transport input: telnet ssh

o VLAN 1 IP Address: 192.168.1.10, subnet mask 255.255.255.0

o Default Gateway: 192.168.1.1

3. Configure Switch S2:

o Hostname: S2
o Password: cisco123

o Enable Secret Password: cisco123

o Encrypt Passwords: Yes

o MOTD: "Unauthorized access is strictly prohibited."

o Line Console Configuration:

▪ Password: console123

▪ Login: Enable

▪ Exec-timeout: 5 minutes

o Line VTY Configuration:

▪ Password: vty123

▪ Login: Enable

▪ Exec-timeout: 5 minutes

▪ Transport input: telnet ssh

o VLAN 1 IP Address: 192.168.2.10, subnet mask 255.255.255.0

o Default Gateway: 192.168.2.1

4. Configure PCs:

o PC-A: IP address 192.168.1.20, subnet mask 255.255.255.0, default gateway


192.168.1.1

o PC-B: IP address 192.168.1.21, subnet mask 255.255.255.0, default gateway


192.168.1.1

o PC-C: IP address 192.168.2.20, subnet mask 255.255.255.0, default gateway


192.168.2.1

o PC-D: IP address 192.168.2.21, subnet mask 255.255.255.0, default gateway


192.168.2.1

5. Connect Devices:

o Connect R1 GigabitEthernet0/0 to S1 VLAN 1.

o Connect R1 GigabitEthernet0/1 to S2 VLAN 1.

o Connect PC-A and PC-B to S1.

o Connect PC-C and PC-D to S2.

6. Verify Connectivity:

o Ping between PCs on the same subnet.

o Ping between PCs on different subnets.

You might also like