Scribd
Upload
15 views1 page

Project Requirments

The project for 3rd year Civil Engineering students at Alexandria University involves creating full structural layouts for a shed and trussed frame, due one week after midterms. Before final exams, students must analyze both structures using SAP2000, perform manual or Excel calculations, and produce detailed structural drawings with specified designs. The project emphasizes the design of various structural components and requires proper documentation of dimensions and connections.

Uploaded by

abdelrahman emad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views1 page

Project Requirments

The project for 3rd year Civil Engineering students at Alexandria University involves creating full structural layouts for a shed and trussed frame, due one week after midterms. Before final exams, students must analyze both structures using SAP2000, perform manual or Excel calculations, and produce detailed structural drawings with specified designs. The project emphasizes the design of various structural components and requires proper documentation of dimensions and connections.

Uploaded by

abdelrahman emad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Alexandria University 3rd year Civil

Faculty of Engineering Steel Structures-2


March 2025

Project Requirements
First Week after Mid term
1- Full Layout of the both constructions (Shed &Trussed Frame)
Structural only (Plan - Elevation - Side Views - End Gable if
applicable)
* The drawings shall be on the upload Layout with the student's
dimensions written in the notes.

Before Final Exams (Last week of the semester)


1- Analysis of the both structures (2D only) using SAP2000 (3 models
- 2 for trussed frame and 1 for shed) applying all required loads
including wind loads.
2- Calculation Note for both structures (manually or by excel).
* For Shed: Design Column, Rafter and the Column to Rafter connection
only
* For Trussed Frame: Design Main Column, Main Rafter, End Columns,
End Rafter, Bracing (Horizontal and Vertical), Purlin as CFS, Truss to
Column Connection and Mid Truss Connection.
3- Full Structural Drawings with the final Sections (Plan - Elevation -
Side Views - End Gable if applicable - the designed Connections)
* The drawings shall be on the upload Layout with the student's
dimensions written in the notes.

You might also like