BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1

Modified from PIP Material Specification Line Class 1SD0S01

March 19, 2009

General Specification Note:

This specification is intended as a minimum requirement for piping materials that are intended for use in a wide variety of localities.
Users are to be aware of, and comply with local codes and/or statues that may impose higher standards or additional requirements
not listed below.
CONSTRUCTION TYPE: SERVICE: MATERIAL: 316L
Class 150 316L Stainless Steel,
Process: Corrosive and Non-corrosive (Note 281) SEE NOTE 245 Stainless Steel
Socket Weld Small Bore, Butt
Alkyl Pyridines, Arylan S, Aqueous Ammonia, Benzoyl Peroxide, FOR MATERIAL
Weld Large Bore, PTFE Corrosion Inhibitor, D.D.B.S.A., Effluent, Fin. Prod. Holdings “B”,
Hydrogen Peroxide (20%), Hydrogen Peroxide (35%),
Neodecanoic Acid, Phenol, Scale Preventitive, Sodium Sulfite,
Tertiary Butyl Alcohol, Demineralized Water
RATING CLASS: Class 150, ASME B16.5 DESIGN CODE: ASME B31.3
TEMPERATURE LIMIT: -20º F to 400º F (Note 09) STRESS RELIEF: None
NOMINAL CORROSION ALLOWANCE: 0.0625” (1/16”) Required
PIP Examination Type “N” PNSC0001 (ASME B31.3 compliant)
EXAMINATION:
PIP Hydrostatic Test Type “H” PNE00012 (ASME B31.3 Compliant) (Note 274)

PRESSURE - TEMPERATURE RATINGS

TEMP ºF -20 to 100 200 300 400
TEMP ºC -29 to 38 93 149 204
For NPS ½ through NPS 12
psig 230 195 175 160
kPag 1585 1345 1205 1100

ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION

PIPE 21
½ – 1½ 40S SS, SMLS ASTM A312-TP 316L (Ej = 1.00)
2 – 12 10S SS, SMLS ASTM A312-TP 316L (Ej = 1.00)
NIPPLES 21
Branch ½ – 1½ 40S SS, SMLS ASTM A312-TP 316L (Ej = 1.00)
Swage (CONC) ½ – 1½ 40S SS, ASTM A403-WP 316L-W, MSS SP-95
Swage (ECC) ½ – 1½ 40S SS, ASTM A403-WP 316L-W, MSS SP-95
FITTINGS 02
SW Pipet ½ – 1½ Class 3000 Weld SS, ASTM A182-F316L
THRD Pipet 03 ½–2 Class 3000 Weld SS, ASTM A182-F316L
SW Lateral Pipet ½ – 1½ Class 3000 Weld SS, ASTM A182-F316L
THRD Lateral Pipet 03 ½–2 Class 3000 Weld SS, ASTM A182-F316L
SW Elbow Pipet ½ – 1½ Class 3000 Weld SS, ASTM A182-F316L
THRD Elbow Pipet 03 ½–2 Class 3000 Weld SS, ASTM A182-F316L
90 ELL ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
45 ELL ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
Tee ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
Tee (RED) ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
Plug 03 ½–2 THRD SS, ASTM A182-F316L, round head, ASME B16.11
Coupling ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
Coupling (RED) ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
Coupling 03 ½–2 Class 3000 THRD SS, ASTM A182-F316L, ASME B16.11
Coupling (RED) 03 ½–2 Class 3000 THRD SS, ASTM A182-F316L, ASME B16.11
Cap ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, ASME B16.11
Cap 03 ½–2 Class 3000 THRD SS, ASTM A182-F316L, ASME B16.11
Reducing Insert ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, MSS SP-79
Union (GJ) ½ – 1½ Class 3000 SW SS, ASTM A182-F316L, integral seat, MSS SP-83

(continued)

_______________________________________________________________________________________________________

Page 1 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

ITEM NOTES NPS SCH/RAT ENDS DESCRIPTION

Reducer (CONC) 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-W, ASME B16.9
Reducer (ECC) 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-W, ASME B16.9
BW Pipet 81 2 – 12 match pipe Weld SS, ASTM A182-F316L
90 LR ELL 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-W, ASME B16.9
45 LR ELL 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-W, ASME B16.9
Tee 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-W, ASME B16.9
Cap 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-S, ASME B16.9
Stub End LJ 22 2 – 12 match pipe Weld SS, ASTM A403-WP 316L-W, ASME B16.9, short pattern
VALVES
Gate ½–2 Class 800 SW forged 316L SS body w/ 316 SS trim GA08SU300
Gate ½–2 Class 800 T/SW forged 316/316L SS ext body w/316 SS trim, HF ST, WB GA08SU200
Gate 06 ½–2 Class 800 T/SW forged 316L SS body w/ 316 SS trim GA08SU302
Gate ½ – 12 Class 150 RF cast 316 SS body w/ 316 SS trim, FP GA01ST501
Globe ½–2 Class 800 SW forged 316L SS body w/ 316 SS trim GL08SU300
Globe 1 – 12 Class 150 RF cast 316 SS body w/ 316 SS trim GL01ST500
Lift Check 61 ½–2 Class 800 SW forged 316L SS body w/ 316 SS trim, piston CL08SU300
Swing Check 62 ½ – 12 Class 150 RF cast 316 SS body w/ 316 SS trim CS01ST501
Dual PLT Check 07, 26, 63 2 – 12 Class 150 RF* 316 SS body w/ 316 SS disc/ST CD01ST700
Ball 09 ½–2 Class 300 SW 316L SS body w/ 316 SS trim, RTFE ST BA03SU300
Ball 09 2–6 Class 150 RF 316 SS body w/ 316 SS trim, RTFE ST BA01ST500
Ball 08, 09 2–6 Class 150 RF 316 SS body w/ 316 SS trim, RTFE ST, FP BA01ST501
Ball 09 8 – 10 Class 150 RF 316 SS body w/ 316 SS trim, RTFE ST, GO BA01ST504
Ball 08, 09 8 – 10 Class 150 RF 316 SS body w/ 316 SS trim, RTFE ST, GO, FP BA01ST505
Ball 09 12 Class 150 RF 316 SS body w/ 316 SS trim, RTFE ST, GO BA01ST502
Ball 08, 09 12 Class 150 RF 316 SS body w/ 316 SS trim, RTFE ST, GO, FP BA01ST503
Ball 06, 09 ½–2 Class 300 T/SW 316L SS body w/ 316 SS trim, RTFE ST BA03SU200
Wafer Butterfly 07, 09 2–4 Class 150 316 SS body w/ 316 SS trim, 316 SS/PTFE ST BF01ST700
Wafer Butterfly 07, 09 6 – 12 Class 150 316 SS body w/ 316 SS trim, 316 SS/PTFE ST, GO BF01ST701
Lug Butterfly 07, 09, 26 2–4 Class 150 316 SS body w/ 316 SS trim, 316 SS/PTFE ST, BF01ST702
Lug Butterfly 07, 09, 26 6 – 12 Class 150 316 SS body w/ 316 SS trim, 316 SS/PTFE ST, GO BF01ST703
FLANGES 02
Socket Weld ½ – 1½ Class 150 RF SS, ASTM A182-F316L, ASME B16.5
Socket Weld 12 ½ – 1½ Class 300 RF SS, ASTM A182-F316L, ASME B16.5
Blind ½ – 12 Class 150 RF SS, ASTM A182-F316L, ASME B16.5
Blind 12 ½ – 12 Class 300 RF SS, ASTM A182-F316L, ASME B16.5
Lap Joint 22 2 – 12 Class 150 SS, ASTM A182-F316L, ASME B16.5
Lap Joint 12, 22 2 – 12 Class 300 SS, ASTM A182-F316L, ASME B16.5
Weld Neck 22 2 – 12 Class 150 RF SS, ASTM A182-F316L, ASME B16.5
Weld Neck 12, 22 2 – 12 Class 300 RF SS, ASTM A182-F316L, ASME B16.5
Pair WN Orifice 2 – 12 Class 300 RF SS, ASTM A182-F316L, ASME B16.36, SW taps
GASKETS
½ – 12 Flexitallic Flexpro gasket style ZG with 316L base material and PTFE
Class 150
Sch 10S facing
½ – 12 Spiral wound gasket with 316L SS windings, outer and inner rings, PTFE
Class 150
Sch 40S filler, Flexitallic type CGI or equal, per ASME B16.20
½ – 12 Flexitallic Flexpro gasket style ZG with 316L base material and PTFE
Class 300
Sch 10S facing
Spiral wound gasket with 316L SS windings, outer and inner rings, PTFE
½ – 12 filler, Flexitallic type CGI or equal, per ASME B16.20
Class 300 Spiral wound 316L SS windings and inner ring, CS outer ring, with PTFE
Sch 40S
½-12 filler, Flexitallic type CGI or equal, ASME B16.20
Class 150
Sch 10S
½-12 Spiral wound 316L SS windings and inner ring, CS outer ring, with PTFE
Class 300
Sch 40S filler, Flexitallic type CGI or equal, ASME B16.20

_______________________________________________________________________________________________________

1SU1 Page 2 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

BOLTING
Stud Bolts ASTM A193, Gr B7 stud w/ 2 heavy hex nuts ASTM A194, Gr 2H

_______________________________________________________________________________________________________

Page 3 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

90°° BRANCH CONNECTION

Legend and Chart

12 T
10 P T
8 P P T
6 P P P T
BRANCH SIZE

4 P P P P T
3 P P P P P T
2 P P P P P P T
1½ S S S S S S E T
1 S S S S S S E E T
¾ S S S S S S E E E T
½ S S S S S S E E E E T
12 10 8 6 4 3 2 1½ 1 ¾ ½
HEADER SIZE

E Reducing Tee
K Full Encirclement Reinforcement (Length equals twice branch pipe OD.)
P Branch Weld w/ Reinforcing Pad (Pad thickness equals run pipe thickness. Pad width equals 1/2 branch OD.)
S SW Pipet
T Tee
W BW Pipet (Note 81)

NOTES:

02 All butt-welded component thicknesses shall match the pipe thickness.

03 Threaded joints are permitted only at the outlet of vent and drain valves, hydrostatic connections, outlet instrument take-off valves, and to match equipment.
06 These valves shall be used only for vent, drain, and instrument connections.
07 These valves have no flanges but are installed between line flanges with extra-length bolts.
08 Full-port valves shall be used if indicated on the P&ID.
09 Pressure and temperature rating can be limited by certain components permitted by this Practice. Manufacturer's recommended pressure-temperature
restrictions shall be consulted.
12 These flanges shall be used only to match Class 300 flange connections at control valves and special equipment.
21 Sch 40S pipe and pipe nipples shall be used for threaded connections for sizes NPS ½ through NPS 2.
22 Stub ends with lap-joint back-up flanges may be used for temperatures up to 500º F (260º C). For higher temperatures, weld-neck flanges shall be used.
26 These check valves shall be used only if indicated on the P&ID.
61 These check valves shall be installed in a horizontal position with cover up.
62 These check valves shall be installed in a horizontal position with cover up or in a vertical position with upward flow.
63 These check valves shall be installed in a horizontal position with hinge pin vertical or in a vertical position with upward flow.
81 Integrally reinforced branch connections, tees, and reducing tees are permitted as an acceptable alternative branch connection.
245 All efforts should be made to use reputable manufacturers to minimize the purchase of a counterfeit component or part. All components and parts are to
comply with all standards such as but not limited to ASTM, ASME, API, MSS, AWWA and NFPA. Substitutions for standards shall not be allowed.
274 Variances to the hydrotesting requirement are allowed but must comply with instructions given in PIP PNE0012 and be approved by engineering.
281 For hydrocarbons or solvents that are considered corrosive to carbon steels, specification 1SU1 shall be considered.

_______________________________________________________________________________________________________

1SU1 Page 4 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

REFERENCES:

Process Industry Practices (PIP)

PIP PNF0200 - Vents, Drains, and Instrument Connection Details
PIP PNSC0001 – ASME B31.3 Metallic Piping Fabrication and Examination Specification
PIP PNE00012 – Piping Examination and Leak Test Guide

API 594 Check Valves: Flanged, Lugged, Wafer and Butt-welding

598 Valve Inspection and Testing
599 Metal Plug Valves – Flanged, Threaded and Welding Ends
608 Metal Ball Valves – Flanged, Threaded and Welding Ends
609 Butterfly Valves: Double Flanged, Lug- and Wafer Type

ASME B16.5 Pipe Flanges and Flanged Fittings

B16.10 Face-to-Face and End-to-End Dimensions of Valves
B16.20 Metallic Gaskets for Pipe Flanges
B16.34 Valves - Flanged, Threaded and Welding End
B16.36 Orifice Flanges
B31.3 Process Piping

ASTM A182 Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A193 Alloy Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
A194 Carbon and Alloy Steel Nuts for Bolts or High Pressure or High Temperature Service, or Both
A312 Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A351 Castings, Austenitic, for Pressure-Containing Parts
A403 Wrought Austenitic Stainless Steel Piping Fittings

MANUFACTURERS: Crane/Aloyco Valves Crane/Duo-Chek Valves Crane/Xomox Valves

Cullman, Alabama Signal Hill, California Cincinnati, Ohio
256-775-3800 562-426-2531 513-745-6000
WWW.CRANEVALVE.com WWW.CRANEVALVE.com WWW.CRANEVALVE.com

Bonney Forge Nibco Valve Crane Valves

Mount Union, Pennsylvania Elkhart, Indiana Cullman, Alabama
800-345-7546 574-295-3000 256-775-3800
WWW.BONNEYFORGE.com WWW.NIBCO.com WWW.CRANEVALVE.com

_______________________________________________________________________________________________________

Page 5 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

VALVE DESCRIPTIONS:

General Valve Description Note:

The size range shown for each valve type may not necessarily be the same as the allowable sizes in the above material specification. The allowable sizes shown
are for the valve type. The allowable sizes in the material specification shall govern the allowable valve sizes for all applicable specification services.

GATE VALVES

Description of GATE Valve (GA01SU301): (1/2 -to- 2)

DELETED

Description of GATE Valve (GA08SU300): (1/2 -to- 2)

Type:......................... GATE
Class: ........................ 800
Ends: ......................... SW
Body/Bonnet: ............ SS (ASTM A182-F316L/A351-CF3M)
Trim: ......................... 316 SS DISC, HARDFACE SEAT, API 602 TRIM #12
Design:...................... OS&Y
Operation: ................. HANDWHEEL
Bore-Port:.................. CONVENTIONAL
Bonnet Type:............. BOLTED
Stem-Packing:........... CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS
Wedge Type:............. SOLID
Gaskets:..................... API 602
Bolts/Nuts: ................ MFG STD

The standards are:

DESIGN - API 602
ENDS - ASME B16.11
RATING - API 602
DIMENSIONAL - MFG STD
Mfgr/Model: Bonney Forge HL-1-8L-SW

Description of GATE Valve (GA08SU200): (1/2 -to- 2)

Type:......................... GATE - extended body
Class: ........................ 800
Ends: ......................... T/SW
Body/Bonnet: ............ SS (ASTM A182-F316L)
Trim: ......................... 316 SS DISC, HARDFACE SEAT, API 602 TRIM #12
Design:...................... OS&Y
Operation: ................. HANDWHEEL
Bore-Port:.................. CONVENTIONAL
Bonnet Type:............. BOLTED
Stem-Packing:........... CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS
Wedge Type:............. SOLID
Gaskets:..................... API 602
Bolts/Nuts: ................ MFG STD

The standards are:

DESIGN - API 602
ENDS - SW: ASME B16.11
- THRD: ASME B1.20.1
RATING - API 602
DIMENSIONAL - MFG STD

Mfgr / Model: Bonney Forge ML-1-8L-T/SW or equal

_______________________________________________________________________________________________________

1SU1 Page 6 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

Description of GATE Valve (GA08SU302): (1/2 -to- 2)

Type: ......................... GATE
Class:......................... 800
Ends: ......................... T/SW
Body/Bonnet: ............ SS (ASTM A182-F316L/A351-CF3M)
Trim: ......................... 316 SS DISC, HARDFACE SEAT, API 602 TRIM #12
Design: ...................... OS&Y
Operation: ................. HANDWHEEL
Bore-Port:.................. CONVENTIONAL
Bonnet Type:............. BOLTED
Stem-Packing: ........... CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS
Wedge Type: ............. SOLID
Gaskets:..................... API 602
Bolts/Nuts: ................ MFG STD

The standards are:

DESIGN - API 602
ENDS - ASME B16.11
RATING - API 602
DIMENSIONAL - MFG STD

Mfgr / Model: Bonney Forge HL-1-8L-T/SW or equal

Description of GATE Valve (GA01ST501): (1/2 -to- 24)

Type: ......................... GATE
Class:......................... 150
Ends: ......................... RF FLG
Body/Bonnet: ............ SS (ASTM A351-CF8M)
Trim: ......................... 316 SS, API 600 TRIM #10
Design: ...................... OS&Y
Operation: ................. HANDWHEEL
Bore-Port:.................. FULL
Bonnet Type:............. BOLTED
Stem-Packing: ........... CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS
Wedge Type: ............. SOLID or FLEXIBLE (≤ NPS 4); FLEXIBLE (≥ NPS 6)
Gaskets:..................... API 600
Bolts/Nuts: ................ MFG STD

The standards are:

DESIGN - ASME B16.34
ENDS - ASME B16.5
RATING - ASME B16.34
TESTING - API 598
DIMENSIONAL - ASME B16.10

Mfgr / Model: Flex Wedge – Aloyco Figure 117F or equal

Solid Wedge – Aloyco Figure 117 or equal

_______________________________________________________________________________________________________

Page 7 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

GLOBE VALVES

Description of GLOBE Valve (GL01SU301): (1/2 -to- 2)

DELETED

Description of GLOBE Valve (GL08SU300): (1/2 -to- 2)

Type:......................... GLOBE
Class: ........................ 800
Ends: ......................... SW
Body/Bonnet: ............ SS (ASTM A182-F316L/A351-CF3M)
Trim: ......................... 316 SS, API 602 TRIM #10
Body Type: ............... T-BODY
Design:...................... OS&Y
Operation: ................. HANDWHEEL
Bonnet Type:............. BOLTED
Stem-Packing:........... CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS
Closure Type:............ DISC
Gaskets:..................... API 602
Bolts/Nuts: ................ MFG STD

The standards are:

DESIGN - API 602, as applicable
ENDS - ASME B16.11
RATING - API 602
DIMENSIONAL - MFG STD

Mfgr/Model: Bonney Forge HL-3-8L-SW or equal

Description of GLOBE Valve (GL01ST500): (1/2 -to- 12)

Type:......................... GLOBE
Class: ........................ 150
Ends: ......................... RF FLG
Body/Bonnet: ............ SS (ASTM A351-CF8M)
Trim: ......................... 316 SS, API 600 TRIM #10
Body Type: ............... T-BODY
Design:...................... OS&Y
Operation: ................. HANDWHEEL
Bonnet Type:............. BOLTED
Stem-Packing:........... CORROSION-INHIBITED, DIE-FORMED FLEXIBLE GRAPHITE with ANTI-EXTRUSION RINGS
Closure Type:............ DISC
Gaskets:..................... API 600
Bolts/Nuts: ................ MFG STD

The standards are:

DESIGN - ASME B16.34
ENDS - ASME B16.5
RATING - ASME B16.34
TESTING - API 598
DIMENSIONAL - ASME B16.10

Mfgr / Model: Aloyco Figure 317 or equal

_______________________________________________________________________________________________________

1SU1 Page 8 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

CHECK VALVES

Description of CHECK Valve (CL08SU300): (1/2 -to- 2)

Type: ......................... CHECK
Class:......................... 800
Ends: ......................... SW
Body/Cover: .............. SS (ASTM A182-F316L/A351-CF3M)
Trim: ......................... SS, API 602 TRIM #10
Design: ...................... PISTON
Cover:........................ BOLTED
Gaskets:..................... API 602
Bolts/Nuts: ................ MFG STD
Installation:................ HORIZONTAL with COVER UP

The standards are:

DESIGN - API 602, as applicable
ENDS - ASME B16.11
RATING - API 602
DIMENSIONAL - MFG STD

Mfgr / Model: Bonney Forge HL-4-8L-SW or equal

Description of CHECK Valve (CS01ST501): (1/2 -to- 24)

Type: ......................... CHECK
Class:......................... 150
Ends: ......................... RF FLG
Body/Cover: .............. SS (ASTM A351-CF8M)
Trim: ......................... API 600 TRIM #10
Design: ...................... SWING
Cover:........................ BOLTED
Gaskets:..................... API 600
Bolts/Nuts: ................ MFG STD
Installation:................ HORIZONTAL with COVER UP or VERTICAL with UPWARD FLOW

The standards are:

DESIGN - ASME B16.34
ENDS - ASME B16.5
RATING - ASME B16.34
TESTING - API 598
DIMENSIONAL - ASME B16.10

Mfgr / Model: Aloyco Figure 337 or equal

Description of CHECK Valve (CD01ST700): (2 -to- 24)

Type: ......................... CHECK
Class:......................... 150
Ends: ......................... RF FLG
Body:......................... SS (ASTM A351-CF8M)
Trim: ......................... 316 SS PLATE/SEAT/PIN, INCONEL-X SPRING
Body Type:................ WAFER
Design: ...................... DUAL PLATE
Installation:................ HORIZONTAL with HINGE PIN VERTICAL or VERTICAL with UPWARD FLOW

The standards are:

DESIGN - API 594
ENDS - ASME B16.5
RATING - ASME B16.34
TESTING - API 598
DIMENSIONAL - API 594

Mfgr / Model: Crane Duo-Chek II H15CVF-9 or equal

_______________________________________________________________________________________________________

Page 9 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

BALL VALVES

Description of BALL Valve (BA03SU300): (1/2 -to- 2)

Type:......................... BALL
Class: ........................ 300
Ends: ......................... SW
Body: ........................ SS (ASTM A182-F316L/A351-CF3M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem:......................... 316 SS
Stem-Seal/Gasket:..... FLEXIBLE GRAPHITE
Body Type: ............... THREE-PIECE BOLTED
Design:...................... FLOATING BALL, FIRE-TESTED
Operation: ................. LEVER
Bore Port:.................. REGULAR

The standards are:

DESIGN - MFG STD
ENDS - ASME B16.11
RATING - MFG STD
DIMENSIONAL - MFG STD

Description of BALL Valve (BA01ST500): (1/2 -to- 6)

Type:......................... BALL
Class: ........................ 150
Ends: ......................... RF FLG
Body: ........................ SS (ASTM A182-F316/A351-CF8M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem:......................... 316 SS
Stem-Seal/Gasket:..... FLEXIBLE GRAPHITE
Body Type: ............... TWO-PIECE BOLTED or UNIBODY
Design:...................... FLOATING BALL, FIRE-TESTED
Operation: ................. LEVER
Bore-Port:.................. REGULAR in accordance with API 608

The standards are:

DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING - MFG STD
DIMENSIONAL - ASME B16.10 SHORT PATTERN

Description of BALL Valve (BA01ST501): (1/2 -to- 6)

Type:......................... BALL
Class: ........................ 150
Ends: ......................... RF FLG
Body ......................... SS (ASTM A182-F316/A351-CF8M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem:......................... 316 SS
Stem-Seal/Gasket:..... FLEXIBLE GRAPHITE
Body Type: ............... TWO-PIECE BOLTED or UNIBODY
Design:...................... FLOATING BALL, FIRE-TESTED
Operation: ................. LEVER
Bore-Port:.................. FULL

The standards are:

DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING - MFG STD
DIMENSIONAL - ASME B16.10 SHORT PATTERN (NPS 1/2 to NPS 4), LONG PATTERN (NPS 6)

_______________________________________________________________________________________________________

1SU1 Page 10 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

Description of BALL Valve (BA01ST502): (12 -to- 24)

Type: ......................... BALL
Class:......................... 150
Ends: ......................... RF FLG
Body:......................... SS (ASTM A182-F316/A351-CF8M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem: ......................... 316 SS
Stem-Seal/Gasket: ..... FLEXIBLE GRAPHITE
Body Type:................ TWO-PIECE BOLTED or UNIBODY
Design: ...................... TRUNNION BALL, FIRE-TESTED
Operation: ................. GEAR
Bore-Port:.................. REGULAR in accordance with API 608

The standards are:

DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING - MFG STD
DIMENSIONAL - ASME B16.10 SHORT PATTERN (NPS 12 to NPS 16), LONG PATTERN (NPS 18 to NPS 24)

Description of BALL Valve (BA01ST503): (12 -to- 24)

Type: ......................... BALL
Class:......................... 150
Ends: ......................... RF FLG
Body:......................... SS (ASTM A182-F316/A351-CF8M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem: ......................... 316 SS
Stem-Seal/Gasket: ..... FLEXIBLE GRAPHITE
Body Type:................ TWO-PIECE BOLTED or UNIBODY
Design: ...................... TRUNNION BALL, FIRE-TESTED
Operation: ................. GEAR
Bore-Port:.................. FULL

The standards are:

DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING - MFG STD
DIMENSIONAL - ASME B16.10 LONG PATTERN

Description of BALL Valve (BA01ST504): (8 -to- 10)

Type: ......................... BALL
Class:......................... 150
Ends: ......................... RF FLG
Body:......................... SS (ASTM A182-F316/A351-CF8M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem: ......................... 316 SS
Stem-Seal/Gasket: ..... FLEXIBLE GRAPHITE
Body Type:................ TWO-PIECE BOLTED or UNIBODY
Design: ...................... FLOATING BALL, FIRE-TESTED
Operation: ................. GEAR
Bore-Port:.................. REGULAR in accordance with API 608

The standards are:

DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING - MFG STD
DIMENSIONAL - ASME B16.10 SHORT PATTERN

_______________________________________________________________________________________________________

Page 11 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

Description of BALL Valve (BA01ST505): (8 -to- 10)

Type:......................... BALL
Class: ........................ 150
Ends: ......................... RF FLG
Body: ........................ SS (ASTM A182-F316/A351-CF8M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem:......................... 316 SS
Stem-Seal/Gasket:..... FLEXIBLE GRAPHITE
Body Type: ............... TWO-PIECE BOLTED or UNIBODY
Design:...................... FLOATING BALL, FIRE-TESTED
Operation: ................. GEAR
Bore-Port:.................. FULL

The standards are:

DESIGN - ASME B16.34 or API 608
ENDS - ASME B16.5
RATING - MFG STD
DIMENSIONAL - ASME B16.10 LONG PATTERN

Description of BALL Valve (BA03SU200): (1/2 -to- 2)

Type:......................... BALL
Class: ........................ 300
Ends: ......................... T/SW
Body: ........................ SS (ASTM A182-F316L/A351-CF3M)
Trim: ......................... 316 SS
Seat: .......................... RTFE
Stem:......................... 316 SS
Stem-Seal/Gasket:..... FLEXIBLE GRAPHITE
Body Type: ............... THREE-PIECE BOLTED
Design:...................... FLOATING BALL, FIRE-TESTED
Operation: ................. LEVER
Bore-Port:.................. REGULAR

The standards are:

DESIGN - MFG STD
ENDS - SW: ASME B16.11
- THRD: ASME B1.20.1
RATING - MFG STD
DIMENSIONAL - MFG STD

_______________________________________________________________________________________________________

1SU1 Page 12 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

BUTTERFLY VALVES

Description of BUTTERFLY Valve (BF01ST700): (2 -to- 4)

Type: ......................... BUTTERFLY
Class:......................... 150
Ends: ......................... WAFER
Body:......................... SS (ASTM A351-CF8M)
Disc:.......................... SS (ASTM A351-CF8M)
Seat: .......................... 316 SS with PTFE
Stem: ......................... 17-4 PH SS
Body Type:................ WAFER
Design: ...................... HIGH-PERFORMANCE, FIRE-TESTED
Gaskets/Seals: ........... GRAPHITE
Stem Packing: ........... GRAPHITE
Operation: ................. LEVER
Bolting: ..................... MFG STD

The standards are:

DESIGN - API 609, CATEGORY B
ENDS - API 609
RATING - MFG STD
DIMENSIONAL - API 609, CATEGORY B

Mfgr / Model: Crane/Xomox 800-667-TG-FT1-L or equal

Description of BUTTERFLY Valve (BF01ST701): (6 -to- 24)

Type: ......................... BUTTERFLY
Class:......................... 150
Ends: ......................... WAFER
Body:......................... SS (ASTM A351-CF8M)
Disc:.......................... SS (ASTM A351-CF8M)
Seat: .......................... 316 SS with PTFE
Stem: ......................... 17-4 PH SS
Body Type:................ WAFER
Design: ...................... HIGH-PERFORMANCE, FIRE-TESTED
Gaskets/Seals: ........... GRAPHITE
Stem Packing: ........... GRAPHITE
Operation: ................. GEAR
Bolting: ..................... MFG STD

The standards are:

DESIGN - API 609, CATEGORY B
ENDS - API 609
RATING - MFG STD
DIMENSIONAL - API 609, CATEGORY B

Mfgr / Model: Crane/Xomox 800-667-TG-FT1-G

_______________________________________________________________________________________________________

Page 13 of 15 1SU1
BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification 1SD0S01
March 19, 2009

Description of BUTTERFLY Valve (BF01ST702): (2 -to- 4)

Type:......................... BUTTERFLY
Class: ........................ 150
Ends: ......................... WAFER-LUG
Body: ........................ SS (ASTM A351-CF8M)
Disc:.......................... SS (ASTM A351-CF8M)
Seat: .......................... 316 SS with PTFE
Stem:......................... 17-4 PH SS
Body Type: ............... LUG
Design:...................... HIGH-PERFORMANCE, FIRE-TESTED
Gaskets/Seals: ........... GRAPHITE
Stem Packing: ........... GRAPHITE
Operation: ................. LEVER
Bolting: ..................... MFG STD

The standards are:

DESIGN - API 609, CATEGORY B
ENDS - API 609
RATING - MFG STD
DIMENSIONAL - API 609, CATEGORY B

Mfgr / Model: Crane/Xomox 801-667-TG-FT1-L

Description of BUTTERFLY Valve (BF01ST703): (6 -to- 24)

Type:......................... BUTTERFLY
Class: ........................ 150
Ends: ......................... WAFER-LUG
Body: ........................ SS (ASTM A351-CF8M)
Disc:.......................... SS (ASTM A351-CF8M)
Seat: .......................... 316 SS with PTFE
Stem:......................... 17-4 PH SS
Body Type: ............... LUG
Design:...................... HIGH-PERFORMANCE, FIRE-TESTED
Gaskets/Seals: ........... GRAPHITE
Stem Packing: ........... GRAPHITE
Operation: ................. GEAR
Bolting: ..................... MFG STD

The standards are:

DESIGN - API 609, CATEGORY B
ENDS - API 609
RATING - MFG STD
DIMENSIONAL - API 609, CATEGORY B

Mfgr / Model: Crane/Xomox 801-667-TG-FT1-G

_______________________________________________________________________________________________________

1SU1 Page 14 of 15
 BAKER PETROLITE PIPING MATERIAL SPECIFICATION 1SU1
Modified from PIP Material Specification Line Class 1SD0S01
March 19, 2009

REVISION HISTORY
Rev. / Issue 06-23-2008 Initial Issue, 1st Draft Middough - RJP
nd
Rev. / Issue 09-02-2008 Minor Revisions, 2 Draft Middough - RJP
Added General Specification Note
Formatted section “Service”
Increased corrosion allowance in section “Nominal Corrosion Allowance”
Rev. / Issue 11-11-2008 Changed gasket types in section “Gaskets” Middough - RJP
Adjusted pipe wall schedule distribution in section “Pipe”
Added references to section “References”
Added “General Valve Description Note” in section “Valve Descriptions”
Revised wording of “General Specification Note”
In section “Services” deleted hydrocarbons and solvents. Added Note 281
Revised section “Examination” to include PIP type
In section “Valves,”
Added the words “cast” or “forged” to gate, globe an check valve descriptions
GA01SU301: deleted
GA08SU300: added new, replaces GA01SU301
GA08SU200:replaces GA08SD200, increased size range to ½ - 2
GA08SU302: added new, replaces GA01SU201
GL01SU301: deleted
GL08SU300: added new, replaces GL01SU301
GL01ST500: increased size range to 1 – 12
CL08SU300: added new, replaces CL01SU301
CS01ST501: increased size range to ½ - 12
CD01ST700: increased size range to 2 – 12
Added PIP PNSC0001, PNE00012 to section “References”
Added section “Manufacturers” after section “References”
Rev. / Issue 03-19-2009 Middough - RJP
In section “Notes” added Note 281
In section “Valve Descriptions,”
GA01SU301: deleted
GA08SU300: added new, replaces GA01SU301, added Mfgr/Model
GA08SU200: added new, replaces GA08SD200, added Mfgr/Model
GA08SU302: added new
GA01ST501: added Mfgr/Model
GL01SU301: deleted
GL08SU300: added new, replaces GL01SU301, added Mfgr/Model
GL01ST500: added Mfgr/Model
CL08SU300: replaces CL01SU301
CS01ST501: added Mfgr/Model
CD01ST700: added Mfgr/Model
BF01ST700: added Mfgr/Model
BF01ST701: added Mfgr/Model
BF01ST703: added Mfgr/Model
BF01ST704: added Mfgr/Model
Rev. / Issue
Rev. / Issue
Rev. / Issue
Rev. / Issue
Rev. / Issue
Rev. / Issue
Rev. / Issue

_______________________________________________________________________________________________________

Page 15 of 15 1SU1