Scribd
Upload
13 views2 pages

Datasheet BOS020P 271950 en

The document provides specifications for the BOS R020K-NS-PR11-02 photoelectric sensor, detailing its electrical, mechanical, and optical features, including operating voltage, dimensions, and range. It highlights compliance with CE and cULus standards, as well as environmental conditions and safety features. Additional notes include the sensor's functionality after overload and the need to order accessories separately.

Uploaded by

ТИМУР БРОНЕНОСЕЦ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views2 pages

Datasheet BOS020P 271950 en

The document provides specifications for the BOS R020K-NS-PR11-02 photoelectric sensor, detailing its electrical, mechanical, and optical features, including operating voltage, dimensions, and range. It highlights compliance with CE and cULus standards, as well as environmental conditions and safety features. Additional notes include the sensor's functionality after overload and the need to order accessories separately.

Uploaded by

ТИМУР БРОНЕНОСЕЦ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Photoelectric Sensors

BOS R020K-NS-PR11-02
Order Code: BOS020P

1) Optical axis receiver, 2) Optical axis emitter, 3) Operating voltage, 4) Light reception

Basic features Electrical data


Approval/Conformity CE No-load current Io max. at Ue 20 mA
cULus Operating voltage Ub 10...30 VDC
WEEE Protection class III
Basic standard IEC 60947-5-2 Rated insulation voltage Ui 50 V DC
Principle of operation Photoelectric sensor Rated operating current Ie 50 mA
Reference reflector BOS R-9 Rated operating voltage Ue DC 24 V
Series R020K Ripple max. (% of Ue) 20 %
Style Square Switching frequency 800 Hz
Connection 60°
Turn-off delay toff max. 0.63 ms
Turn-on delay ton max. 0.63 ms
Display/Operation Voltage drop Ud max. at Ie 2.5 V

Display LED green: Power


LED yellow: Light received Environmental conditions
Ambient temperature -25...50 °C
Electrical connection IP rating IP67
Cable diameter D 2.40 mm
Cable length L 2m Functional safety
Conductor cross-section 0.09 mm²
MTTF (40 °C) 3378 a
Connection Cable, 2.00 m, PVC
Number of conductors 3
Polarity reversal protected yes Interface
Short-circuit protection yes Switching output NPN normally open (NO)

Material
Housing material ABS
Material jacket PVC
Material sensing surface PMMA

1/2
Internet www.balluff.com eCl@ss 9.1: 27-27-09-02
Subject to change without notice: 271950 ETIM 6.0: EC002717
BOS020P_0.58_2024-05-31
Photoelectric Sensors
BOS R020K-NS-PR11-02
Order Code: BOS020P
Mechanical data Range/Distance
Dimension 7.7 x 26.8 x 13.5 mm Range 0...3 m
Mounting part Screw M3 Rated operating distance Sn 3m

Optical features
Ambient light max. 5000 Lux
Blind zone 25 mm
Light spot size Ø 11 mm at 250 mm
Light type LED, red light
Polarizing filter yes
Principle of optical operation Retroreflective sensor
Switching function, optical dark-on
Wave length 660 nm

Remarks
The sensor is functional again after the overload has been eliminated.
Actuation object (target): gray card, 200 x 200, 90 % remission, lateral approach, approach direction vertical to lens axis plane.
For additional information, refer to user's guide.
Order accessories separately.
For more information about MTTF and B10d see MTTF / B10d Certificate

Indication of the MTTF- / B10d value does not represent a binding composition and/or life expectancy assurance; these are simply experiential values with no
warranty implications. These declared values also do not extend the expiration period for defect claims or affect it in any way.

Wiring Diagrams

Opto Symbols

2/2
Internet www.balluff.com eCl@ss 9.1: 27-27-09-02
Subject to change without notice: 271950 ETIM 6.0: EC002717
BOS020P_0.58_2024-05-31

You might also like