MOTOR GRADER

Name.

Tel.

DG130 / DG170
E-mail.

Address.

DG190 / DG220
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for
your individual Doosan equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors. Pictures of Doosan units may show other than standard equipment

Model Engine Transmission Moldboard Operating Weight

DG130 Cummins 6BT5.9 97kW (130 hp) 3,658 mm 12.0 ton
DG170 Cummins 6BT A5.9 132kW (178 hp) Power shift 3,658 mm 14.5 ton
(ZF Technology),
DG190 Cummins 6CTA8.3 142kW (190 hp) 6 Fwd / 3 Rev Gears 4,268 mm 15.6 ton
DG220 Cummins 6CTA8.3 160kW (215 hp) 4,320 mm 15.8 ton

489 Injung-ro, Dong-gu, Incheon, South Korea

http://www.hyundai-dicom / en /business/on struction-equipment
Photos may include optional equipment
DIPBE-00-2208
 WHAT’S NEWEST THE BEST PRODUCTIVITY AND FUEL EFFICIENCY EASY MAINTENANCE

AND BEST
• High performance and fuel-efficient engine • Easy access to service areas
• Reliable and proven transmission • Disconnect switch
• Strong A&U-shaped drawbar and optimal curvature moldboard • Replaceable wear inserts
• Wide tires (17.5-25 12PR L3)
• Bright and long-lasting LED lights EASY CONTROL AND
HDI strives to build state-of-the-art OPERATOR'S SAFETY

road machinery that meets various • Spacious cabin with excellent visibility
• Dual(Lever & Pedal) throttle control
preferences and ensures maximum • ROPS Frame (Optional)

performance, higher precision and • Air-conditioner

• Adjustable Control Console
superior quality. • Suspension Seat
• Beacon Lamp (Amber)(Optional)

WORK TOOLS AND

ATTACHMENTS
• Durable frame and attachments
• Automatic leveling device (Optional)
• Tire 13.00-24-12PR G-2
(for agriculture) (Optional)
•S
 carifier (Mid, V-type, 11 shanks)
(Optional)
• Ripper (3 or 5 shanks) (Optional)
• Front Dozer (Optional)

High Efficiency High Stability Low Fuel Consumption

Photos may include optional equipment

02 03
 THE BEST PRODUCTIVITY
HIGH PERFORMANCE AND LOW EMISSION ENGINE
HDI MOTOR GRADERS, Cummins turbocharged engine,
realizes high productivity and low fuel consumption.

AND FUEL EFFICIENCY

Durable mechanical inline fuel injection system provides
precise throttle control and thus it delivers higher work
speeds with high horsepower.

DRAWBAR, CIRCLE AND MOLDBOARD RELIABLE AND PROVEN TRANSMISSION

The drawbar is composed of strong A & U-shaped frame for strength durability, and precise blading control. ZF-technology powershift transmission is best matched
The heat-treated rotating ring structure is equipped with four turntable of inner gear guide type, can obtain 360° smooth rotation. with Cummins engine and is reliable and easy to operate,
The moldboard provides optimal curvature that helps move all soil types quickly and efficiently. suited for all types of working conditions.

Photos may include optional equipment * Above result is based on internal test, against the same operation weight machine.

04 05
 MAINTENANCE

EASY ACCESS TO DISCONNECT SWITCH

SERVICE AREAS For maintenance, the batteries
Side-open engine hood can be disconnected with this
doors improve accessibility switch when repairing the
to service points for daily machine or checking batteries.
check and replacing filters. REPLACEABLE WEAR INSERTS
High load-resistant wear inserts are installed
between the blade mounting group and moldboard.
It can be replaced easily and helps keep components
tight for fine grading.

06 07
 EASY CONTROL AND
OPERATOR'S SAFETY
EXCELLENT VISIBILITY
Excellent visibility and layout side pillar boosts operator's
confidence and provuctivity in all grader applications.
Well-positioned blade linkage provides an unobstructed
view of the moldboard and front tires.

REAR VIEW

ADJUSTABLE
CONTROL CONSOLE
The control console moves
back and forth and the
operator easily gets in
and out of the operator
compartment. The steering
wheel also tilts to suit the
operator's preference.

LED LIGHTS
Bright and long-lasting
LED lights are applied to
cabin (Front/Rear) and
attachment.

AIR CONDITIONER
Increase air flow rate by
refurbishing the shape of
air outlets.

SUSPENSION SEAT
Adopt high-rigidity
suspension seat to
enhance vibration
absorption.

08 09
 WORK TOOL AND
Durable frame and attachments Box-type frame and advanced
transmission enable heavy-duty work, while the flexible blade
suspension system and articulated frame allow for wide working ranges.

FRONT DOZER (OPTIONAL)

The front dozer is a front mounted equipment used for spreading
materials such as gravel piles or blading at the front of the machine
where is difficult to access with the moldboard.
ATTACHMENTS

RIPPER(REAR) AND SCARIFIER(MID-MOUNT) (OPTIONAL)

Digs up hard material cannot be removed by the moldboard.
The V-type scarifier can accommodate up to 11 teeth, the ripper
also accommodate 3 or 5 shanks.

AUTOMATIC LEVELING DEVICE (OPTIONAL)

As a 2D control system, Automatic Leveling Device offers precise
and reliable height and slope control and a high level of flexibility
in the choice of sensors and fields of application.

10 11
 TECHNICAL SPECIFICATIONS
ENGINE BRAKES
DG130 DG170 DG190 DG220 DG130 DG170 DG190 DG220
Model 6BT5.9-C130 6BTA5.9-C180 6CTA8.3-C190 6CTA8.3-C215 Foot operated, hydraulically actuated on four Foot operated, hydraulically actuated on four tandem wheels,
Service brake
Type Vertical, in-line, water-cooled, 4 strokes tandem wheels, 3,671cm2 total braking surface 3,613cm2 total braking surface
Aspiration turbocharged aftercooling Parking brake Flexible shaft control, drum brake
No. of cylinders 6 6 6 6
Bore 102 mm 102 mm 114 mm 114 mm
Stroke 120 mm 120 mm 135 mm 135 mm FRAME
Piston displacement 5.9 L 5.9 L 8.3 L 8.3 L
DG130 DG170 DG190 DG220
Horsepower - Gross 97kW/2,200rpm 132kW/2,200rpm 142kW/2,200rpm 160kW/2,200rpm
Height 299 mm 302 mm 302 mm 302 mm
Maximum torque 560Nm/1,500rpm 750Nm/1,300rpm 860Nm/1,400rpm 908Nm/1,500rpm
Width 280 mm 280 mm 280 mm 280 mm
Torque rise 32% 30% 39% 31%
Side 16 mm 16 mm 16 mm 22 mm
Air cleaner Dry type Dry type Dry type Dry type Upper, Lower 16 mm 25 mm 25 mm 25 mm
Electrical 28V, 70A 28V, 55A 28V, 70A 28V, 70A
Battery 12V*2 ; 900cca 12V*2 ; 900cca 12V*2 ; 900cca 12V*2 ; 900cca
DRAWBAR
TRANSMISSION AND TORQUE CONVERTER DG130 DG170 DG190 DG220
A-shaped, u-section press formed and welded construction for maximum strength with a replacable drawbar ball
DG130 DG170 DG190 DG220 Drawbar frame 200*12 mm 210*16 mm 210*16 mm 210*16 mm
Speed (at rated engine speed) Forward / Reverse (km/h)
1st 6.9/6.9 6.5/6.5 6.5/6.5 6.88/6.88
2nd 10.7/17.3 11.4/14.6 11.4/14.6 11.85/15.65 CIRCLE
3rd 17.3/37.8 14.6/30 14.6/30 15.65/33.45
4th 26 24.8 24.8 26.68 DG130 DG170 DG190 DG220
5th 37.8 30 30 33.45 Four circle support shoes with replaceable wear surface. Circle teeth hardened on front 180° of circle
6th 53.4 49.2 49.2 52.74 Diameter (outside) 1,300 mm 1,410 mm 1,410 mm 1,410 mm
Circle reversing control hydraulic rotation 360 ° 360 ° 360 ° 360 °

TANDEM DRIVE
MOLDBOARD
DG130 DG170 DG190 DG220
Oscillating welded box section 614*225 mm 614*225 mm 614*225 mm 614*225 mm DG130 DG170 DG190 DG220
Inner 22 mm 22 mm 22 mm 22 mm Replaceable metal wear inserts, cutting edge and bits. Cutting edge and end bits are hardened.
Side wall thickness Dimensions 3,658*580*18 mm 3,658*580*18 mm 4,268*580*18 mm 4,320*580*22 mm
Outer 22 mm 22 mm 22 mm 22 mm
Whell axle spacing 1,535.4 mm 1,535.4 mm 1,535.4 mm 1,535.4 mm Arc radius 329 mm 329 mm 329 mm 329 mm
Tandem oscillation ±13 ° ±13 ° ±13 ° ±13 ° Cutting edge 152*16 mm 152*16 mm 152*16 mm 152*16 mm

FRONT AXLE BLADE RANGE

DG130 DG170 DG190 DG220 DG130 DG170 DG190 DG220
Type Solid bar construction welded steel sections Right 525 mm 525 mm 525 mm 525 mm
Circle center shift
Ground clearance at pivot 610 mm 610 mm 610 mm 610 mm Left 530 mm 530 mm 530 mm 530 mm
Wheel lean angle, right or left ±17 ° ±17 ° ±17 ° ±17 ° Right 815 mm 815 mm 965 mm 965 mm
Moldboard side shift
Oscillation, total 32 ° 32 ° 32 ° 32 ° Left 840 mm 840 mm 965 mm 965 mm
Maximum shoulder Right 1,886 mm 1,886 mm 2,341 mm 2,367 mm
reach outside rear tire
(frame straight) Left 1,916 mm 1,916 mm 2,346 mm 2,372 mm
REAR AXLE Maximum lift above ground 410 mm 450 mm 450 mm 450 mm
Maximum cutting depth 560 mm 535 mm 535 mm 535 mm
DG130 DG170 DG190 DG220
Maximum blade angle, right or left 90 ° 90 ° 90 ° 90 °
Alloy steel, heat treated, full floating Blade tip angle 29-77 ° 29-77 ° 29-77 ° 29-77 °
NO-SPIN differential
axle with lock/unlock differential

HYDRAULICS
STEERING
DG130 DG170 DG190 DG220
DG130 DG170 DG190 DG220
Hydraulic system of double pump and double multi way valve. Priority braking and steering. There are hydraulic locks
Hydraulic power steering providing on the scraper lifting, front wheel tilting, traction frame tilting, power tilting, frame articulation and other oil circuits
Hydraulic power steering
stopped engine steering meeting ISO 5010
Output (at engine rated rpm) 140.8 L/min 99 L/min 99 L/min 99 L/min
Minimum turning radius 6.6 mm 7.3 mm 7.3 mm 7.3 mm
Maximum system pressure 17.5 MPa 17.5 MPa 17.5 MPa 17.5 MPa
Maximum steering range, right or left 49 ° 49 ° 49 ° 49 °
Articulation ±26 ° ±26 ° ±26 ° ±26 °

12 13
 TECHNICAL SPECIFICATIONS DIMENSIONS
INSTRUMENT
DG130 DG170 DG190 DG220
Gauge Standard Engine coolant temperature, fuel level, torque converter oil temperature
Warning lights / indicator Standard Battery charge,directional indicator, engine oil pressure, parking brake

A
CAPACITIES (REFILLING)
DG130 DG170 DG190 DG220
Fuel tank 370 L 370 L 370 L 370 L
Cooling system 24 L 29 L 36.5 L 36.5 L
O
Crank case 17 L 17 L 27 L 27 L
Transmission 28 L 28 L 28 L 28 L J
Final drive 18 L 18 L 18 L 18 L K
Tandem housing (each) 45*2 L 45*2 L 45*2 L 45*2 L
L
Hydraulic system 65 L 65 L 65 L 65 L
Circle reverse housing 4L 4L 4L 4L

OPERATING WEIGTHT (APPROXIMATE)

DG130 DG170 DG190 DG220
Total 12,000 kg 14,500 kg 15,600 kg 15,800 kg
Includes lubricants, On rear wheels 8,400 kg 10,150 kg 10,920 kg 11,060 kg
coolant, full fuel tank
On front wheels 3,600 kg 4,350 kg 4,680 kg 4,740 kg
Total 12,650 kg 15,150 kg 16,250 kg 16,450 kg A M
With front mounted N
On rear wheels 8,400 kg 10,150 kg 10,920 kg 11,060 kg
scarifier
On front wheels 4,250 kg 5,000 kg 5,330 kg 5,390 kg
With rear mounted Total 13,000 kg 15,150 kg 15,541kg 15,741kg
ripper and front On rear wheels 9,400 kg 10,800 kg 10,879kg 11,019kg C
push plate On front wheels 3,600 kg 4,350 kg 4,662kg 4,772kg
D G
B E
F
H
SCARIFIER (OPTIONAL)
DG130 DG170 DG190 DG220
Working width 1,325 mm 1,325 mm 1,325 mm 1,325 mm
Middle, Scarifying depth, maximum 210 mm 210 mm 210 mm 210 mm
V-type Item Description DG130 DG170 DG190 DG220
Scarifier shank holders 11 11 11 11
Scarifier shank holders spacing 130 mm 130 mm 130 mm 130 mm Height to Top of Non-ROPS Cabin 3,448 mm 3,406 mm 3,420 mm 3,420 mm
A
Working width 2,161 mm 2,161 mm 2,161 mm Height to Top of ROPS Frame 3,632 mm 3,590 mm 3,604 mm 3,604 mm
Scarifying depth, maximum 249 mm 249 mm 249 mm B Center of Front Axle to counterweight 675 mm 833 mm 963 mm 963 mm
Rear
Scarifier shank holders 9 9 9
C Ground Clearance to Center Front Axle 869 mm 725 mm 714 mm 714 mm
Scarifier shank holders spacing 267 mm 267 mm 267 mm
D Length of Front Axle to Moldboard 2,470 mm 2,600 mm 2,600 mm 2,600 mm
E Length of Front Axle to Mid Tandem 5,780 mm 6,100 mm 6,100 mm 6,100 mm
RIPPER (OPTIONAL) F Length of Front Tire to Rear of Machine 8,125 mm 8,353 mm 8,353 mm 8,653 mm

DG130 DG170 DG190 DG220 G Length of Between Tandem Axles 1,535 mm 1,535 mm 1,535 mm 1,535 mm
Ripping depth, maximum 350 mm 436 mm 436 mm 436 mm H Length of Between Counterweight to Ripper 8,125 mm 8,353 mm 8,353 mm 8,653 mm
3-teeth (standard) 3-teeth (standard) 3-teeth (standard) 3-teeth (standard) J Width of Tire Center Lines 2,120 mm 2,120 mm 2,120 mm 2,120 mm
Ripper shank holders 5-teeth (optional) 5-teeth (optional) 5-teeth (optional) 5-teeth (optional)
K Width of Outside Tires 2,565 mm 2,565 mm 2,565 mm 2,565 mm
Ripper shank holder spacing 455 mm 534 mm 534 mm 534 mm
Machine length increase, beam raised 1,000 mm 1,000 mm 1,000 mm 1,000 mm L Width of Moldboard 3,658 mm 3,658 mm 4,268 mm 4,320 mm
M Height to Exhaust Stack 2,582 mm 2,863 mm 2,846 mm 2,747 mm
N Height to Top of Cylinders 2,793 mm 2,833 mm 2,908 mm 2,908 mm
O Ground Clearance to Trans. Case 339 mm 339 mm 339 mm 339 mm

14 15