IndustrialNet™ Category 6A SF/UTP
Copper Cable SPECIFICATION SHEE T
specifications
Category 6A 4-pair SF/UTP copper cable shall meet or exceed the channel
requirements of ANSI/TIA-568.2-D and ISO 11801 as noted below. The stranded
copper conductors shall be 24/7 and 26/7 AWG with high density polyethylene (HDPE) IndustrialNet Category 6A SF/UTP
insulation. The copper conductors shall be twisted in pairs and wrapped with a foam Copper Cable
polypropylene tape to form a core. All pairs shall then be surrounded by an overall
24/7 AWG CMX/CM
braided shield and metallic foil and covered with a thermoplastic elastomer (TPE)
jacket. The jacket shall be oil, UV, weld splatter, and abrasion resistant for enhanced 4-pair: ISFCH6X04A**-UG
chemical resistance and mechanical performance. The jacket shall be flame retardant 26/7 AWG CMX/CM
(CMX/CM) for Industrial Ethernet applications. This cable shall support high-flex 4-pair: ISFCH6X04B**-UG
applications and be rated for panel or on-machine applications where space is shared
with 600V high voltage cables. Category 6A RJ45 Field Terminable Plug
Field terminable
technical information plug: FPS6X88MTG
IndustrialNet M12 X-Code to RJ45
Electrical performance: 24 AWG: Certified point-to-point and 2-connector channel performance up to 80
meters and meets or exceeds the requirements of ANSI/TIA-568.2-D and ISO 11801. Panel Mount Adapter
26 AWG: Certified point-to-point and 2-connector channel performance up to 66 Straight: ICAM12XRJS
meters and meets or exceeds the requirements of ANSI/TIA-568.2-D and ISO 11801.
90° angle: ICAM12X90RJS
Standard compliances: UL AWM Style 2463 (80°C 600V)
Mini-Com® Modular Patch Panel
Flex Life Test: 1 million cycles at 10 x cable diameter; 10 million cycles at
20x cable diameter 8-port, unshielded: CDPP8RG
Torsion Life Test: 3 million cycles, 270° 8-port, shielded: CDPP8RG-S
Oil resistance for six months at 20°C
DIN Rail Adapter
Conductors/insulators: Four pairs of 24/7 AWG and 26/7 stranded copper insulated with high density
polyethylene (HDPE) insulation 1-port, unshielded: CADIN1IG***
Insulation diameter: 24 AWG = 1.1mm (0.045") nominal 1-port, shielded: CADIN1IG-S***
26 AWG = 0.86mm (0.034") nominal **To designate color, add suffix TL (Teal),
BL (Black).
PoE+ compliant Meets IEEE 802.3af and IEEE 802.3at for PoE applications ***For standard colors other than International
Flame rating: CMX/CM (UL1685) Gray, replace IG in part number with BL (Black).
EN50575: Euroclass Fca
Installation tension: 110 N (25 lbf.) maximum
Temperature rating: -40°C to 80°C (-40°F to 176°F) during transport, installation, and operation
Cable jacket: Thermoplastic elastomer (TPE), oil, sunlight, weld splatter, and abrasion resistant
Cable diameter: 24 AWG = 8.1mm (0.322") nominal
26 AWG = 7.3mm (0.290") nominal
Cable weight: 18 kg/305m (40 lbs./1000')
Packaging: Packaged 305m (1000') on a reel
Package tested to ISTA Procedure 1A
key features and benefits
Third party tested: Cable has been tested by an independent laboratory and complies with the
electrical standard requirements of IEC 61156-6 Category 6A and ANSI/TIA-568-C.2
Category 6A standards
Reliability: Shielded SF/UTP cable construction protects against environmental elements
that can cause electrical performance failures; stranded conductors for high flex
applications and ease of installation; cable jacket is oil, sunlight, weld splatter, and
abrasion resistant for enhanced chemical resistance and mechanical performance
High flex applications: Life cycle tested for robotic and c-track use
600V on-machine Rated for panel or on-machine applications when the space is shared with 600V
applications: high voltage power cables
applications
IndustrialNet Category 6A SF/UTP Copper Cable provides reliability and high performance as an integral component
of the end-to-end solution for industrial Ethernet based communications networks. The 4-pair high performance cable
ensures highest availability in conditions seen in industrial environments. The cable incorporates a durable oil and
UV resistant TPE jacket meeting Appliance Wiring Material requirements and rated for panel or on-machine applications
when the space is shared with 600V high voltage power cables.
Key applications include:
• 10BASE-T (Ethernet)
• 100BASE-T (Fast Ethernet)
• 1000BASE-T (Gigabit Ethernet)
• 10GBASE-T (Gigabit Ethernet)
• Control panel deployments featuring power source voltages
• Downlinks from control panel to the machine area
• Uplinks featuring gigabit data transmission from the control panel to the consolidation point
• High flex applications – Robotic, C-Track
w w w. p a n d u i t .c o m
IndustrialNet™ Category 6A SF/UTP Copper Cable
additional specifications
Mechanical Test
Ultimate Breaking Strength >400 N (90 lbf.)
Minimum Bend Radius 2x cable diameter
Electrical Test
Nominal Velocity of Propagation (NVP) 68%
Operating Voltage, Maximum 80V
cable construction
ISFCH6X04A ISFCH6X04B
Stranded Conductor Wire Stranded Conductor Wire
Conductor Conductor
Insulator Insulator
Barrier Layer Barrier Layer
Braid
Foil Shield
Foil Shield
Pair Separator
Pair Separator
Braid
Jacket Jacket
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT US/CANADA PANDUIT EUROPE LTD. PANDUIT SINGAPORE PTE. LTD. PANDUIT JAPAN PANDUIT LATIN AMERICA PANDUIT AUSTRALIA PTY. LTD.
Phone: 800.777.3300 London, UK Republic of Singapore Tokyo, Japan Guadalajara, Mexico Victoria, Australia
Phone: 44.20.8601.7200 Phone: 65.6305.7575 Phone: 81.3.6863.6000 Phone: 52.33.3777.6000 Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
© 2023 Panduit Corp.
Visit us at www.panduit.com ALL RIGHTS RESERVED.
Contact Customer Service by email:
[email protected] COSP433-WW-ENG
or by phone: 800.777.3300 3/2023
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Panduit:
ISFCH6X04BTL-UG ISFCH6X04ATL-UG ISFCH6X04ABL-UG
