COLLAR TYPE MACHINE
1. Auger filler
2. Cup filler
3. Linear weigher
4. Multiheadweigher
AUGER FILLER COLLAR TYPE MACHINE
TECHNICAL SPECIFIACTION
Product application : Powder
Sealing Type : Center Seal, three side, four side
Roll Width : 500, 800, 1100(depending on the customer/and the product)
Pouch Size : depending on the size of the pouch
Feeding System : Augur Filler
Main Motor : 1 HP AC Drive
Electrical Supply : 220Y V AC/Single Phase/50 Hz or 440V AC / Three Phase / 50 Hz
Packing Film : Any heat Sealable Laminate
Temperature Controller : PID
Machine Speed : 25-60, 40-80 Pouch / Min, (Depends upon nature of poducts)
Contact Parts : Food Grade Stainless Steel SS 3l 6 / SS 304.
Compressed Air : 6 CFM @ 6 Bar (Depending 0n attachments)
Power Consumption : 3KW
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing, screw elevator
take away conveyor( At an extra cost)
CUP FILLER COLLAR TYPE MACHINE
TECHNICAL SPECIFIACTION
Product application : Any free flow products or non-sticky products
Sealing Type : C enter Seal, three side, four side
Roll Width : 500, 800, 1100(depending on the customer/and the product)
Pouch Size : Depending on the size of the pouch
Feeding System : Cup Filler
Main Motor : 1 HP AC Drive
Electrical Supply : 220V AC/Single Phase/50 Hz or 440V AC / Three Phase / 50 Hz
Packing Film : Any heat Sealable Laminate
Temperature Controller : PID
Machine Speed : 25-60, 40-80 Pouch / Min, (Depends upon nature of poducts)
Contact Parts : Food Grade Stainless Steel SS 3l 6 / SS 304.
Compressed Air : 6 CFM @ 6 Bar (Depending 0n attachments)
Power Consumption : 3KW
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing, take away
conveyor ( At an extra cost)
LINEAR WEIGHER FILLER COLLAR TYPE MACHINE
TECHNICAL SPECIFIACTION
Product application : Any free flow products or non-sticky products
Sealing Type : Center Seal, three side, four side
Roll Width : 500, 800, 1100(depending on the customer/and the product)
Pouch Size : Depending on the size of the pouch
Feeding System : Single head, two head, three head, four head
Main Motor : 1 HP AC Drive
Electrical Supply : 220V AC/Single Phase/50 Hz or 440V AC / Three Phase / 50 Hz
Packing Film : Any heat Sealable Laminate
Temperature Controller : PID
Machine Speed : For Single head 4-6Pouch / Min, for two head 10-12Pouch / Min, for three head
16-18Pouch / Min, for four head 22-24Pouch / Min (Depends upon nature of poducts)
Contact Parts : Food Grade Stainless Steel SS 3l 6 / SS 304.
Compressed Air : 6 CFM @ 6 Bar (Depending 0n attachments)
Power Consumption : 3KW
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing,take away conveyor, inclined
bucket elevator ( At an extra cost)
MULTIHEAD WEIGHER FILLER COLLAR TYPE MACHINE
TECHNICAL SPECIFIACTION
Product application : Any free flow products or non-sticky products
Sealing Type : Center Seal, three side, four side
Roll Width :500, 800, 1100(depending on the customer/and the product)
Pouch Size : depending on the size of the pouch
Feeding System : ten head, fourteen head, twenty one head
Main Motor : 1 HP AC Drive
Electrical Supply : 220Y I AC/Single Phase/50 Hz or 44AY I AC / Three Phase / 50 Hz
Packing Film :Any heat Sealable Laminate
Temperature Controller :PID
Machine Speed : for Ten head 40-60Pouch / Min, for Fourteen head 75-80Pouch / Min, for Twenty
one head 115-120Pouch / Min, (Depends upon nature of poducts)
Contact Parts : Food Grade Stainless Steel SS 3l 6 / SS 304.
Compressed Air : 6 CFM @ 6 Bar (Depending 0n attachments)
Power Consumption : 3KW
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing, take away elevator, Z type bucket
elevator
( At an extra cost)
PNEMATIC CHUTE MODEL
1. Auger filler
2. Cup filler
3. Linear weigher
4. Horizontal auger filler
5. Paste filler/liquid filler
Auger Filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : Vertical Type Auger filler
Roll Width : Min 80mm Max. 500mm
Main Motor : 24 30ratio 3000rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 440 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 1 grm to 20 grms , 20 to 250 grms , 500 to 1000 grms
Compressed Air : 6CFM@6Bar
Temperature Controller : PID based
Machine Speed : 20-50 Pouch / Min. (depends upon the pouch size)
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Cup Filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : Cup filler
Roll Width : Min 80mm Max. 500mm
Main Motor : 24 30ratio 3000rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 1 grm to 20 grms , 20 to 250 grms , 500 to 1000 grms
Compressed Air : 6CFM@6Bar
Temperature Controller : PID based
Machine Speed : 20-50 Pouch / Min. (depends upon the pouch size)
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Linear weigher
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : one head, two head, three head, four head
Roll Width : Min 80mm Max. 500mm
Main Motor : 24 30ratio 3000rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 230 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 1 grm to 20 grms , 20 to 250 grms , 500 to 1000 grms
Compressed Air : 6CFM@6Bar
Temperature Controller : PID based
Machine Speed : For Single head 4-6Pouch / Min, for two head 10-12Pouch / Min, for three head
16-18Pouch / Min, for four head 22-24Pouch / Min (Depends upon nature of poducts)
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Horizontal Auger Filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : Horizontal Type Auger filler
Roll Width : Min 80mm Max. 500mm
Main Motor : 24 30ratio 3000rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 1 grm to 20 grms , 20 to 250 grms , 500 to 1000 grms
Compressed Air : 6CFM@6Bar
Temperature Controller : PID based
Machine Speed : 20-50 Pouch / Min. (depends upon the pouch size)
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
PASTE FILLING/liquid filling MACHINE
TECHNICAL SPECIFICATION
Sealing Type : 3 or 4 Side Sealing
Filling Type : Paste Filling/liquid filling machine
Roll Width : Min 80mm Max. 300mm
Main Motor : ½ hp
Heater Load : 1Kw
Electrical Supply : Single Phase, 220 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 1 to 30 ml , 10 ml to 100ml , 30 to 300ml
Compressed Air : 6CFM@6Bar
Temperature Controller : PID based
Machine Speed : 20-50 Pouch / Min. (depends upon the pouch size)
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Cam based machine
1. Intelligent weigher filler
2. Horizontal auger filler
3. Cup filler
Intelligent weigher
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : intelligent weigher
Roll Width : Min 80mm Max. 500mm
Main Motor : ½ hp 10ratio 1440 rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 1 grm to 100 grms ,
Temperature Controller : PID based
Machine Speed : depends upon the gram age that has to be packed
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Horizontal auger filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : horizontal auger filler
Roll Width : Min 80mm Max. 500mm
Main Motor : ½ hp 10ratio 1440 rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 10-50grams, 50-100grams
Temperature Controller : PID based
Machine Speed : depends upon the gram age that has to be packed
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Cup filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : cup filler
Roll Width : Min 80mm Max. 500mm
Main Motor : ½ hp 10ratio 1440 rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 25-100grams
Temperature Controller : PID based
Machine Speed : depends upon the gram age that has to be packed
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : AC Drive / PLC based
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Mechanical based machine
1. Cup filler
2. Auger filler
3. Mechanical liquid packing FFS
4. Mechanical paste packing FFS
Cup filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : cup filler
Roll Width : Min 80mm Max. 500mm
Main Motor : ½ hp 1440 rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 10-50grams, 50-250grams, 250-500grams ,500-1000grams
Temperature Controller : PID based
Machine Speed : depends upon the gram age that has to be packed
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : pulley and belt
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Auger filler
TECHNICAL SPECIFICATION
Sealing Type : Centre seal or 3 or 4 Side Sealing
Filling Type : auger filler
Roll Width : Min 80mm Max. 500mm
Main Motor : ½ hp 1440 rpm
Heater Load : 1Kw
Electrical Supply : 1 Phase, 240 V / AC, 50 Hz
Packing Film : Any heat Sealable Laminate
Filling Range : 10-50grams, 50-250grams, 250-500grams ,500-1000grams
Temperature Controller : PID based
Machine Speed : depends upon the gram age that has to be packed
Contact Parts : Food Grade Stainless Steel SS 304
Speed / machine Control : pulley and belt
Net Weight : 500 Kg. (Approx)
Optional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, take away elevator
( At an extra cost )
Mechanical liquid packing
TECHNICAL SPECIFICATION
Type of seal : 3 side or Four side seal
Packaging Material : Shampoo, Lubrication oil, wine, syrup, juice and other free flowing
liquid
Weight of the material : 6ml to 25ml, 30ml to 100ml
Filing system : Volumetric piston filing
Filing accuracy : +/- 1 %
Size of bags : W - 50 mm to 140mm L - 50mm to 130mm
Speed/Capacity : 20 to 50 bag/min
Power Consumption : Motor ½ HP/220V Single Phase Heater 300 x 2 = 600 W + 300 x 2 = 600 W
main load 3.5 Kw
Film/roll material : 0.D of Roll 250mm max. ID of Roll pipe 75mm min.
Net weight : 380kg
Gross weight : 480kg
Mechanical paste packing
TECHNICAL SPECIFICATION
Type of seal : 3 side or Four side seal
Packaging Material : Shampoo, Lubrication oil, wine, syrup, juice and other free flowing
liquid
Weight of the material : 6ml to 25ml, 30ml to 100ml
Filing system : Volumetric piston filing
Filing accuracy : +/- 1 %
Size of bags : W - 50 mm to 140mm L - 50mm to 130mm
Speed/Capacity : 20 to 50 bag/min
Power Consumption : Motor ½ HP/220V Single Phase Heater 300 x 2 = 600 W + 300 x 2 = 600 W
main load 3.5 Kw
Film/roll material : 0.D of Roll 250mm max. ID of Roll pipe 75mm min.
Net weight : 380kg
Gross weight : 480kg
HORIZONTAL PACKING MACHINE
1.FLOW WRAP MECHANICAL MODEL
2.FLOW WRAP SERVO PULLING MODEL
3.SYNCHRONISE FLOW WRAP
4.PNEUMATIC FLOW WRAP
5.FAMIL PACK FLOW WRAP MECHANICAL MODEL
6.FLOW WRAP SERVO PULLING MODEL
7.SYNCHRONISE FAMILY PACK FLOW WRAP
8. PNEUMATIC FAMILY PACK FLOW WRAP
FLOW WRAP MECHANICAL MODEL
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : One Product / Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Temperature Controller : PID (Programmable Logic Control) Based
Roll Width : Max. 600mm
Pouch Sealing Type : Pillow Type / Center Seal/Four side
Pouch/paper pulling : with gear
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220 VAC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
FLOW WRAP SERVO MODEL
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : One Product / Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Operating system : PLC (Programmable Logic Control)
Temperature Controller : PID (Programmable Logic Control) Based
Pouch Sealing Type : Pillow Type / Center Seal/ Four side
Pouch/paper pulling : servo 750kw
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220V AC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
SYNCHRONISE FLOW WRAP
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : One Product / Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Operating system : PLC (Programmable Logic Control)
Temperature Controller : PID (Programmable Logic Control) Based
Pouch Sealing Type : Pillow Type / Center Seal/ Four side
Pouch/paper pulling : servo 750kw
Sealing done/and conveyor : servo 750kw
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220V AC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
PNEUMATIC FLOW WRAP
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : One Product / Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Operating system : PLC (Programmable Logic Control)
Temperature Controller : PID (Programmable Logic Control) Based
Pouch Sealing Type : Pillow Type / Center Seal/ Four side
Pouch/paper pulling : servo 750kw
Sealing done : Pneumatic
Compressed Air : 6CFM@6Bar
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220V AC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
FAMILY PACK FLOW WRAP MECHANICAL MODEL
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : family Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Temperature Controller : PID (Programmable Logic Control) Based
Roll Width : Max. 600mm
Pouch Sealing Type : Pillow Type / Center Seal/Four side
Pouch/paper pulling : with gear
Power Consumption : 3Kw
Machine Speed : 30-80 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220 VAC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
FAMILY PACK FLOW WRAP SERVO MODEL
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : Family Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Operating system : PLC (Programmable Logic Control)
Temperature Controller : PID (Programmable Logic Control) Based
Pouch Sealing Type : Pillow Type / Center Seal/ Four side
Pouch/paper pulling : servo 750kw
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220V AC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
FAMILY PACK SYNCHRONISE FLOW WRAP
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : FAMILY Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Operating system : PLC (Programmable Logic Control)
Temperature Controller : PID (Programmable Logic Control) Based
Pouch Sealing Type : Pillow Type / Center Seal/ Four side
Pouch/paper pulling : servo 750kw
Sealing done/and conveyor : servo 750kw
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220V AC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
FAMILY PACK PNEUMATIC FLOW WRAP
TECHNICAL SPECIFICATIONS
Product application : irregular, Cubical, Cylindrical, Square, and Rectangular shaped solid
products
Quantity / Pouch : FAMILY Pouch (Can be changed as per requirement)
Feeding System : Manual, Auto Feeder (Conveyor, Trolley etc.)
Operating system : PLC (Programmable Logic Control)
Temperature Controller : PID (Programmable Logic Control) Based
Pouch Sealing Type : Pillow Type / Center Seal/ Four side
Pouch/paper pulling : servo 750kw
Sealing done : Pneumatic
Compressed Air : 6CFM@6Bar
Power Consumption : 3Kw
Machine Speed : 30-100 Pouch / Min (Depends on laminate, Product size & shape)
Electrical Supply : 220V AC / Single Phase / 50 Hz
Net Weight : 650 Kg (Approx.)
0ptional Attachments : Hot foil Coding/inkjet coding, Nitrogen Flushing Device, (At an Extra Cost)
Manual based machine
1. Band sealer horizontal
2. Band sealer vertical
3. Liquid filling machine
4. Paste filling machine
5. Weigh metric machine
6. Hot foil ribbon coding
7. Hot ink coding
8. Shrink tunnel
9. Vacuum packing
10. Capping machine
11. Labeling machine
12. Induction machine sealing machine
13. Compressor
14. Cartoon sealer
15. Pedal sealer
16. Strapping machines
