Scribd
Upload
6 views

ArduinoSevenSegmentDisplay

The document contains a program for controlling a digital display to show numbers 0 through 9 using specific pin configurations. Each number is displayed by setting certain pins to HIGH, while a clearDisplay function resets all pins to LOW. The setup function initializes the pins as outputs, and the loop function continuously cycles through displaying each number with a delay of 2 seconds.

Uploaded by

p2155876
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

ArduinoSevenSegmentDisplay

The document contains a program for controlling a digital display to show numbers 0 through 9 using specific pin configurations. Each number is displayed by setting certain pins to HIGH, while a clearDisplay function resets all pins to LOW. The setup function initializes the pins as outputs, and the loop function continuously cycles through displaying each number with a delay of 2 seconds.

Uploaded by

p2155876
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

int a=7;

int b=6;
int c=5;
int d=11;
int e=10;
int f=8;
int g=9;
int dp=4;
//display number 1
void display1(void)
{
digitalWrite(b,HIGH);
digitalWrite(c,HIGH);
}
//display number2
void display2(void)
{
digitalWrite(a,HIGH);
digitalWrite(b,HIGH);
digitalWrite(g,HIGH);
digitalWrite(e,HIGH);
digitalWrite(d,HIGH);
}
// display number3
void display3(void)
{
digitalWrite(a,HIGH);
digitalWrite(b,HIGH);

digitalWrite(c,HIGH);
digitalWrite(d,HIGH);
digitalWrite(g,HIGH);
}
// display number4
void display4(void)
{
digitalWrite(f,HIGH);
digitalWrite(b,HIGH);
digitalWrite(g,HIGH);
digitalWrite(c,HIGH);

}
// display number5
void display5(void)
{
digitalWrite(a,HIGH);
digitalWrite(f,HIGH);
digitalWrite(g,HIGH);
digitalWrite(c,HIGH);
digitalWrite(d,HIGH);
}
// display number6
void display6(void)
{
digitalWrite(a,HIGH);
digitalWrite(f,HIGH);
digitalWrite(g,HIGH);
digitalWrite(c,HIGH);
digitalWrite(d,HIGH);
digitalWrite(e,HIGH);
}
// display number7
void display7(void)
{
digitalWrite(a,HIGH);
digitalWrite(b,HIGH);
digitalWrite(c,HIGH);
}
// display number8
void display8(void)
{
digitalWrite(a,HIGH);
digitalWrite(b,HIGH);
digitalWrite(g,HIGH);
digitalWrite(c,HIGH);
digitalWrite(d,HIGH);
digitalWrite(e,HIGH);
digitalWrite(f,HIGH);
}
void clearDisplay(void)
{
digitalWrite(a,LOW);
digitalWrite(b,LOW);
digitalWrite(g,LOW);
digitalWrite(c,LOW);
digitalWrite(d,LOW);
digitalWrite(e,LOW);
digitalWrite(f,LOW);
}
void display9(void)
{
digitalWrite(a,HIGH);
digitalWrite(b,HIGH);
digitalWrite(g,HIGH);
digitalWrite(c,HIGH);
digitalWrite(d,HIGH);
digitalWrite(f,HIGH);
}
void display0(void)
{
digitalWrite(a,HIGH);
digitalWrite(b,HIGH);
digitalWrite(c,HIGH);
digitalWrite(d,HIGH);
digitalWrite(e,HIGH);
digitalWrite(f,HIGH);
}
void setup()
{
int i;
for(i=4;i<=11;i++)
pinMode(i,OUTPUT);
}
void loop()
{
while(1)
{ clearDisplay();
display0();
delay(2000);
clearDisplay();
display1();
delay(2000);
clearDisplay();
display2();
delay(2000);
clearDisplay();
display3();
delay(2000);
clearDisplay();
display4();
delay(2000);
clearDisplay();
display5();
delay(2000);
clearDisplay();
display6();
delay(2000);
clearDisplay();
display7();
delay(2000);
clearDisplay();
display8();
delay(2000);
clearDisplay();
display9();
delay(2000);
}
}

You might also like