COLD JUICE DISPENSER

USER MANUAL
 Introduction of cold-hot juice dispenser

Thanks for you choosing and using LSJ-9L-12L-18L-20L-50L series cold-hot juice dispenser.
To ensure that you can use normally and effectively, we supply the instroduction and
ask you to pay attention to as follows:
1. Before use the juice dispenser,please read the introduction first and master the
operation methods.
2. Please use it according to the performance parameters defined on the voltage, power and
the relative supply power cable.
3. Please pay attention to the directions for the materials, which will not
influence the normal use.
To Protect the customers health, please wash the juice dispenser.

A. Purposes and features

The cold-hot juice dispenser is manufactured by us based on absorbing the technologies from
home and abroad . It can make the various beverage and juice to be delicious liquid cold and hot
drink. It is used widely in the restaurant, hotel, entertainment sites, cold-hot drink house,
and usually, it is popular in the common drink booths.
It has reasonable configuration, excellent performance, pretty appearance, and simple
operation. The main parts are made of the stainless steel and innocuous plastics, It adopts
automatically control the temperature to make cold or hot drink, magnetization and the
spewing fixture to make the even temperature and improve the refrigeration and calefaction
effections. 2 containers or 3 containers juice dispenser can sell 2 or 3 different kinds of juice at
the same time, which is an ideal appliance to consumers (1 juice dispenser,2 purposes),
and can be used all the year.

B. Main technology parameters

It e m 1 container 2 container 3container 4 container

Capability 12L-18 L-220L 9Lx2-12Lx2-18Lx2-220Lx2 12Lx3-18Lx3 9Lx4-50L

P ower supply 220V-240V 220V-240V 220V-240V 220V-240V
50H Z/60H Z 50H Z/60H Z 50H Z/60H Z 50H Z/60H Z
110V-120V 110V-120V 110V-120V 110V-120V
Pow er C old 180W C old 280W C old 380W C old 258W-304W
H ot 540W H ot 1080W H ot 1620W H ot 1000W
Cold-beverage 7- 1 2 ℃ 7 -1 22℃ 7 -1 22℃ 7 -1 2 ℃
temperature
Hot-beverage 52-58 ℃ 52-58
52-58℃ 52-58 ℃ 52-58
52-58℃
temperature
12L 470x360x690mm 9L 420x300x 700mm
Shape size 12L 460x450x 690mm 12L 640x450x690mm 9L 420x440x700mm
18L 510x470x 740mm
18L /20L 470x360x740mm 20L 64 0×450×690mm 18L 750x470x740mm 50L 520x520x730mm
Weight 12L 26kg 18L 20kg 20L 22kg 9L22kg 12L35kg 18 L
35kg 20L37kg 12L 38kg 18L 45kg 9L 35kg 50L 32kg
 C. Installing Methods and Notices
1. To install it,please choose the site which is flat, fixable and can avoid the direct
sunshine in summer.
2. Around the machine, it should have 150mm up room to make the air circulating and make
sure the machine can run effectively.
3. Before installing it, please check whether the supply power confirms to the requirements
or not. The power supply cable is not too thin or too long. The cross section of cable should be
1.5-2.5mm, voltage is mounted on the fixed position with fuse which will keep the users safety, it
must have the reliable grounding. The socket should be mounted on the fixed position with fuse
which will keep the machine running safety.
4. To make the fix position for machine, you should make its front lower and back higher(to adjust
the foot of the bottom can do it), then the water in the salver can flow into the box through the
hose.

D. Use methods
How to use the cold beverage machine
1. To fall the prepared beverage into the crock, the height of it should not exceed the
standard height (9L-12L-18L-20L-50L), otherwise, the beverage will flow into the
churn-dasher from the dasher tube, which will make the dasher burn.
2 The temperature of the beverage should not too high (no exceed 35 Celsius degree), otherwise,it will
make a bad effection for refrigeration.
3 Plug in the supply power to the 3 holes socket, the grounding hole should connect with
the protectable wire or fixture to ensure the satety.
4 To turn the switch on the position of refrigeration,press down the refrgeraion switch, the
compressor fan starts running and refrigeration system starts working. Then start the dasher
to mix or start the spewing switch to spew.
5 When the beverage become to the suitable temperature, please make the cup against the
push board lightly, the beverage will flow into the cup from the outlet mouth.
6 When the temperature reduces to the certain degree, the refrigerator will stop running
because of the influence from the temperature controller. And when
it increases, it will start automatically again.
7 It should restart after after 5 minutes if it turn off suddently or stop temporarily, otherwise,it
will damage the compressor.
 How to use the hot beverage machine
1. Plug in the supply power to the 3 holes socket, the grounding hole should connect whit the
protectable wires or fixture to ensure the safety.
2. To turn the switch on the position on the position of calefaction, press down the calefaction
switch, the heater starts running and refrigeration system starts working. Then Start the
dasher to mixture.
3. When the beverage become to the proper temperature, please make to cup against the
push board lightly,the beverage will flow into the cup from the outle mouth.
4. The heater can not be burnt without water, usually the beverage in the container should be
not less than 6L.
5. When the temperature increase to the certain degree, the calefaction will stop running
because of the influence from the temperature controller(the heating light is out).And
when it reduces, it will start automatically again(the heating light is on).
6. To ensure the clean and beautiful appearance of the machine, the user should clean the
beverage crocks everyday.
7. We make the machine according to the quality standard strictly. To use, repair and maintain
it correctly can prolong its life. If any problems, please make some repairs on spot and
resolve them. If some problems on the refrigeration system,please ask the special persons
to repair it.

How to remove the troubles

Troubles C auses R epair methods
Compressor stops 1. The supply pow er off or not connected. 1. C heck the supply pow er and
wo rking 2. Switch damaged socket
3. Circuit trouble. 2. replace the switch.
4. Over load and the protector broken. 3. check and repair
4. check and replace
Compressor runs 1. capillary stop 1.replace the capillary or dry the filter
but no refrigeration 2. the refrigeration fluid reaked 2. check the systems and add the
3. the electrical fan broken medicine.
3. replace the electrical machine
Winnowing water 1. differences in the pump inside 1. clean
abnor m ally 2. impeller and holes damaged. 2. replace the impeller and pump
3. circuit damaged 3. check and repair
4. big clearance between the imperller and crock 4. adjust the clearnce
Crock leaking Sealing ring old or installed badly Replace or re-install
Valve leaking Sealing ring old or installed badly Repalce or re-install
 F. SPARE PARTS FOR COLD-HOT JUICER

NO . Name of Spare parts NO . Name of Spare parts

1 L id 14 Compressor
2 Stainless steel valve 15 Over loading protect
s ettin g
3 C ro ck 16 Bottom of screwdrive
4 Mixing leaf 17 Po wer switch
5 Mixing pole 18 Refreigeration switch
6 ha ndle 19 M ixing switch
7 Airproof circle 20 M ixing switch
8 Condesensation setting 21 Left and right plank
9 Electric fan 22 Front and back plank
10 E vaporator setting 23 Magnet
11 Automatic temperature 24 Spray motor
co ntro ller
12 M eeting dish 25 Sta inless
Steel pla te
13 M ixing setting

NO.1-22 for minxing type

NO.23-25 for spraying type