Scribd
Upload
17 views

Digital Intercom Manual

The document describes a one-button emergency rescue device that dials up to four pre-stored telephone numbers in sequence when triggered. It outlines the system configuration, including power and telephone line connections, and provides detailed instructions for setting the phone numbers and operating the device. The system will automatically hang up if no one answers after calling all groups, and can be interrupted by pressing the call button during a call.

Uploaded by

ASIA PTS ELEVATOR INC
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
17 views

Digital Intercom Manual

The document describes a one-button emergency rescue device that dials up to four pre-stored telephone numbers in sequence when triggered. It outlines the system configuration, including power and telephone line connections, and provides detailed instructions for setting the phone numbers and operating the device. The system will automatically hang up if no one answers after calling all groups, and can be interrupted by pressing the call button during a call.

Uploaded by

ASIA PTS ELEVATOR INC
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

One-button emergency

rescue device
System Introduction:

This system needs to dial based on an external telephone


line. Provide an external telephone line to connect to this
system. Pre-store 1 to 4 groups of telephones according to
the rules. When the call is triggered, the system will dial 4
groups of telephones in the pre-stored order. When no one
answers the four groups of telephones, the system will
automatically hang up. When the system is in the calling
state or during a call, the system will hang up immediately
if the call button is pressed again.

System configuration:
1. Power supply DC12V connection lead
2. Telephone line connection lead
3. Button lead

Function introduction:

1. Connect the telephone line to the telephone line lead

2. Connect the button lead to a passive normally open


button

3. Connect the power supply, and after the system


starts normally, the system will make a "beep" sound

4. Use any phone to dial the landline number, and wait


for the system to automatically answer the call to enter
the call state. If you need to set the call phone number,
you can directly press the number keys on the phone to
set the number。
For example: The first group is set to: 133 1111, the second group is set to:

133 2222, the third group is set to: 133 3333, the fourth group is set to: 021-

88888888

The operation method is as follows:

(1) Dial the landline number by phone, and press

the keypad number after the system is connected:

*1133 1111# The system will automatically hang

up at this time, indicating that the first group setting

is successful. If the setting is not successful, the

system will not automatically hang up and need to be

re-entered.

(2) Dial the landline number by phone, and press

the keypad number after the system is connected:

*2133 2222# The system will automatically hang

up at this time, indicating that the second group

setting is successful. If the setting is not successful,

the system will not automatically hang up and need

to be re-entered.

(3) Dial the landline number by phone, and press

the keypad number after the system is connected:

*3133 3333# The system will automatically hang

up at this time, indicating that the third group setting

is successful. If the setting is not successful, the

system will not automatically hang up and need to be

re-entered.
(4) Dial the landline number by phone, and press

the*402188888888# The system will automatically

hang up at this time, indicating that the fourth group

setting is successful. If the setting is not successful,

the system will not automatically hang up and need

to be re-entered.

5. After the setting is completed, press the call

button, the system will beep, and then call the first

group of phones. If no one answers the first group of

phones, the system will automatically call the preset

second group of phones, then the third group, and

the fourth group. If no one answers the fourth group,

the system will automatically hang up.

If one of the groups answers the call, the caller in

the car needs to press the call button once to hang

up, otherwise the system will continue to call the

next group of phones。 keypad number after the

system is connected:

You might also like