Scribd
Upload
19 views3 pages

How To Setup Local Area Network Using Fiber Optic

The document provides a list of recommended networking equipment, including various Mikrotik routers and switches, along with transceiver options for different setups. It outlines example configurations for a 1G BiDi setup and a 10G gaming shed setup, detailing the necessary components and estimated costs. The document encourages users to explore regional distributors for purchasing equipment.

Uploaded by

myhy7p
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
19 views3 pages

How To Setup Local Area Network Using Fiber Optic

The document provides a list of recommended networking equipment, including various Mikrotik routers and switches, along with transceiver options for different setups. It outlines example configurations for a 1G BiDi setup and a 10G gaming shed setup, detailing the necessary components and estimated costs. The document encourages users to explore regional distributors for purchasing equipment.

Uploaded by

myhy7p
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

equipment, so that’s what I’ve listed here.

Feel free to shop around as well,


there are a lot of good regional distributors for this (i.e. Baltic Netoworks in the
US, Getic in the EU) depending on your location.

 Mikrotik RB260GS (1G capable) - 5 Copper, 1 SFP port


 Mikrotik RB260GSP (1G capable) - Same as above, but with passive PoE
out (if you don’t know about passive PoE, be warned).
 Mikrotik hEX S Ethernet Router (1G capable) - Same ports as RB260,
but a full router
 Mikrotik hAP AC WiFi Router (1G capable) - Same as above, but with
WiFi as well. You can also use it as a WiFi access point + switch, using
the router you already have.
 Mikrotik CRS328-24P-4S+RM (10G SFP+ capable) - The big 24 PoE + 4
SFP+ port switch that I use in my house

Transceivers
OM3 Multimode (Duplex)

Choose the same transceiver for both ends.

 Basic 1G SFP from FS.com


 Basic 1G SFP from Amazon
 10G SFP+ from FS.com
 10G SFP+ from Amazon
OS2 Singlemode (Duplex)

Choose the same transceiver for both ends.

 Basic 1G SFP from FS.com


 Basic 1G SFP from Amazon
 10G SFP+ from FS.com
 10G SFP+ 2km from FS.com
 10G SFP+ from Amazon
OS3 Singlemode (Simplex / BiDi)

Choose a MATCHED PAIR here, with opposite transmit/receive wavelengths on


each end

 Basic 1G SFP SIDE A


 Basic 1G SFP SIDE B
 10G SFP+ SIDE A
 10G SFP+ SIDE B

Example Setup Lists


These are some example setups I’ve setup for you to use to think about what
you need for your project.

1G Cheap BiDi Setup

This is a simple gigabit BiDi setup that can be used to run Ethernet long
distances, to outbuildings, etc. with a simple media converter to connect to your
existing network and a switch at the far end.

 Fiber (Indoors / In Conduit) - I recommend the 3mm jacket for increased


robustness
 Fiber (Outdoors / Direct Burial) - Fiber Count = Simplex, Connectors =
LC UPC Simplex
 Basic 1G SFP SIDE A
 Basic 1G SFP SIDE B
 Media Converter for one side
 Mikrotik Switch for other side Total Cost is around $100 for indoor fiber
or $200 for outdoor fiber, depending on the length.

My 10G Gaming Shed Setup

This is the setup I actually used in the video.

 Fiber (Indoors / In Conduit)


 Transceivers (2x)
 Intel X520-DA1/DA2
 Mikrotik CRS328-24P-4S+RM

Since I already had the switch, I actually spent $98 on the rest of the parts, but
the switch is an additional $489 at list price (obviously it can do a whole lot
more than just this one run though).

READ OTHER POSTS

You might also like