Scribd
Upload
24 views1 page

Painting Inspection Report

The Painting Inspection Report outlines the surface preparation and environmental conditions for a painting project, including details on the types of primers and coats applied. It includes information on temperature, humidity, and chloride contamination checks, as well as measurements of the required and measured dry film thickness (DFT). The report is signed by the QC engineer and includes remarks and equipment used for the inspection.

Uploaded by

muhammadmuneebnaeem728
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
24 views1 page

Painting Inspection Report

The Painting Inspection Report outlines the surface preparation and environmental conditions for a painting project, including details on the types of primers and coats applied. It includes information on temperature, humidity, and chloride contamination checks, as well as measurements of the required and measured dry film thickness (DFT). The report is signed by the QC engineer and includes remarks and equipment used for the inspection.

Uploaded by

muhammadmuneebnaeem728
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

PAINTING INSPECTION REPORT

REPORT NO. DATE:

CLIENT:

PROJECT:

W.O.No. PROCEDURE NO.


SURFACE PREPARATION
ENVIRONMENTAL CONDITIONS :
SA2-1/2 SA 3 S/BLAST
SURFACE PRIMER ABRASIVES USED:
DESCRIPTIO
PREPN. 1st COAT IInd III rd COAT FINAL GARNET / SAND / GRIT
N
COAT COAT
DATE MANUFACTURER : ALLEUARD
TIME IN HRS SIZE:
AMB / METAL SURFACE
TEMP *C INTERNAL / EXTERNAL
DRY / WET CHLORIDE CONTAMINATION
BULB CHECKED :
TEMP.*C
DEW POINT PROFILE :
TEMP *C
RELATIVE (IN MICRONS)
HUMIDITY ٪
SIGNATURE SIGNATURE
PAINT APPLICATION
INTERNAL EXTERNAL NO OF COATS TOTAL REQD DFT : MICRONS
REQD DFT COLOUR COATIN BATCH THINNER REQD DFT MEASURED DFT
COAT NO (IN G NO IF IF APPL (IN (IN MICRONS)
MICRONS) PRODUCT APPL MICRONS) AVG. AVG.
CUMULATIVE
(MIN) (MAX)
PRIMER
Ist COAT
II nd COAT

III rd COAT

FINAL COAT
REMARKS: MEASURED DFT Min & Max Micron
DRAWING
NO.
EQUIPMENT:
QTY:
QC ENGINEER CLIEN TP
T I
NAME:

SIGNATURE:

DATE:

You might also like