HDMI 1×8 Splitter
over CAT6 (70m)
VER 1.0
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction........................................................................................... 1
2. Features................................................................................................. 1
3. Package Contents................................................................................ 1
4. Specifications....................................................................................... 2
5. Operation Controls and Functions...................................................... 3
5.1 Transmitter Panel.............................................................................3
5.2 Receiver Panel................................................................................ 4
5.3 IR Pin Definition................................................................................ 5
6. EDID Mode............................................................................................. 6
7. Application Example............................................................................7
1. Introduction
This HDMI 1x8 Splitter can distribute 1 HDMI source signal to any 8 display
devices. Support video resolution up to 4K2K@30Hz 4:4:4. It is designed
with1 HDMI input, 1 HDMI loop output and 8 CAT outputs. The HDMI signal
transmission distance can be extended up to 131ft / 40 meters at the
resolution of 4K30Hz, or 230ft / 70 meters at 1080P@60Hz via a single CAT6
cable.The product supports one-way IR control signal pass-through and
advanced EDID management. It also supports one-way POC function.
2. Features
☆ HDMI 1.4 and HDCP 1.4 compliant
☆ Video resolution up to 4K2K@30Hz(4:4:4) 8-bit
☆ Support audio formats: LPCM 7.1CH, Dolby True HD, and DTS-HD
Master Audio
☆ Extend the signal transmission distance up to 131ft / 40 meters at the
resolution of 4K30Hz, or 230ft / 70 meters at 1080P@60Hz via a single
CAT6 cable
☆ Support 1 HDMI input, 1 HDMI loop output and 8 CAT outputs.
☆ Advanced EDID management
☆ Support 12V POC function (only from transmitter to receiver)
☆ Compact design for easy and flexible installation
3. Package Contents
① 1 × HDMI 1×8 Splitter
② 8 × CAT Receiver
③ 1 × IR Blaster Cable (1.5 meters)
④ 8 × IR Receiver Cable (1.5 meters)
⑤ 2 × Mounting Ear
⑥ 1 × 12V/2.5A DC Locking Power Adapter
⑦ 8 × Machine Screw (KM3*4)
⑧ 1 × User Manual
-1-
4. Specifications
Technical
HDMI Compliance HDMI 1.4
HDCP Compliance HDCP 1.4
Video Bandwidth 297MHz/10.2Gbps
Video Resolution 480i ~1080p50/60Hz, 4Kx2K@30Hz4 4 4
Color Depth 8-bit,10-bit,12-bit (1080p@60Hz); 8-bit (4K30Hz)
Color Space RGB, YCbCr_4:4:4/4:2:2. YUV_4:2:0
LPCM 7.1CH, Dolby True HD, and DTS-HD Master
Audio Formats Audio
Transmission Distance 1080P@60--70M, 4K30 --40M
ESD Protection Human body model—±8kV (Air-gap discharge) &
±4kV (Contact discharge)
Connection
Input: 1×HDMI IN [Type A, 19-pin female]
Outputs: 1×HDMI OUT [Type A, 19-pin female]
Transmitter 8x CAT OUT [RJ45]
Controls: 1× IR OUT [3.5mm Stereo Mini-jack]
1x EDID DIP switch [4-pin]
1x Update [Micro USB]
Inputs: 1x IR IN [3.5mm Stereo Mini-jack]
Receiver 1x CAT IN [RJ45, 8-pin female]
Output: 1x HDMI OUT [Type A, 19-pin female]
Mechanical
Housing Metal Enclosure
Color Black
Transmitter: 295mm (W) × 82mm (D) × 18mm (H)
Dimensions
Receiver: 79.5mm (W) × 69mm (D) × 16.5mm (H)
Weight Transmitter: 628g; Receiver: 130g
Power Supply 12V/2.5A DC Power
(US/EU standards, CE/FCC/RoHs certificated)
Power Consumption 19.2W
Operation Temp. 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
-2-
5. Operation Controls and Functions
5.1 Transmitter Panel
POWER
CAT OUT8 CAT OUT7 CAT OUT6 CAT OUT5 CAT OUT4 CAT OUT3 CAT OUT2 CAT OUT1 HDMI OUT HDMI IN IR OUT EDID UPDATE DC 12V POWER
2 3 4 5 6 7 8 9 10 11
No. Name Function Description
When the Transmitter is powered on, the red power LED
1 POWER LED
will be on.
2 CAT OUT (1~8) Connect to the CAT port of the Receiver with a CAT6 cable.
Power LED Transmitter supports one-way POC function. When it
3 supplies power to the Receiver through a CAT cable, the
(Green)
Power LED will be on.
Data Signal ▪ Illunimating: HDMI signal with HDCP.
4 Indicator ▪ Flashing: HDMI signal without HDCP.
(Yellow) ▪ Dark: No HDMI signal.
HDMI loop output port, connect to the HDMI display
5 HDMI OUT device such as TV or Monitor with an HDMI cable.
HDMI input1/5
port, connect to HDMI source device such as
6 HDMI IN 3 or4set-top box with an HDMI cable.
DVD
Connect to IR blaster cable, the IR signal is from “IR IN”
7 IR OUT
port of the Receiver.
EDID DIP Used to set EDID mode. Please refer to Section “6. EDID
8
Switch Mode” for details.
Mini USB update port. Connect to PC for firmware
9 UPDATE
updating.
10 DC 12V DC 12V Power input port.
POWER Press the switch to power on/off the device (“-” for on,
11 Switch “o” for off).
-3-
5.2 Receiver Panel
HDMI OUT IR IN CAT
1 2 4 3 5
No. Name Function Description
HDMI signal output port. Connect to HDMI display
1 HDMI OUT device such as HDTV.
Connect to IR receiver cable, the IR signal will emit to
2 IR IN
the IR OUT port of the transmitter.
CAT input port. Connect to the CAT output port of the
3 CAT
transmitter with a CAT6 cable.
When the Receiver is powered on, the LED will be on.
4 Power LED
The device supports POC function, so the Receiver is
(Green)
powered by the Transmitter through a CAT cable.
Data Signal ▪ Illunimating: HDMI signal with HDCP.
5 Indicator ▪ Flashing: HDMI signal without HDCP.
(Yellow) ▪ Dark: No HDMI signal.
-4-
5.3 IR Pin Definition
IR Receiver IR Blaster
IR Blaster IR Blaster Signal
Power
NC
IR Receiver
IR Signal
Power
Grounding
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the transmission
distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the transmission
distance is 0-8 meters.
-5-
6. EDID Mode
The defined EDID setting list of the product is shown as below:
EDID Mode EDID Description
0000 1080P, 2CH AUDIO
0001 1080P, DOLBY/DTS5.1
0010 1080P, HD AUDIO
0011 1080i, 2CH AUDIO
0100 1080i, DOLBY/DTS5.1
0101 1080i, HD AUDIO
0110 3D,1080P, 2CH AUDIO
0111 3D,1080P, DOLBY/DTS5.1
1000 3D,1080P, HD AUDIO
1001 4K30, 2CH AUDIO
1010 4K30, DOLBY/DTS5.1
1011 4K30, HD AUDIO
1100 Copy Loop Out
1101 720p, 2CH AUDIO
1110 720p, DOLBY/DTS5.1
1111 720p, HD AUDIO
-6-
7. Application Example
UHDTV
IR Blaster
PC
Transmitter
LAN
CAT6
Power Supply
DVD or Blu-ray Player
LAN
Receiver
IR Receiver
UHDTV
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
-7-
