Trick

Design Dean iGuzzini

Skira

Last information update: March 2025

Product configuration: S706

S706: Wall/Ceiling-mounted – Warm White – 360° Lama optic (divided into ten sectors that can be controlled separately) –
DMX/RDM

Product code
S706: Wall/Ceiling-mounted – Warm White – 360° Lama optic (divided into ten sectors that can be controlled separately) –
DMX/RDM

Technical description
Wall, ceiling or floor-mounted luminaire; fitted with a 360° Lama optic divided into ten sectors that can be controlled and managed
separately. The product consists of an optical assembly and cover made of an aluminium alloy and subjected to a multi-step, pre-
treatment process in which the main phases are degreasing, fluorozirconation (a protective surface film) and sealing (with a nano-
structured silane layer). The following painting stage consists of a primer and a liquid acrylic paint, cured at 150°C, with a high level of
weather and UV ray resistance. The optic screen is made of methacrylate. DMX/RDM electronics are included in the product and
distributed between the optical assembly and cover. A standard programme has already been loaded inside the product if the Trick
em is not connected to any DMX/RDM control system. The power supply unit is not included and can be ordered as a separate
accessory. There are two knockout walls on the cover to facilitate the sideways passage of the cable. Pass-through wiring is
included. To install Trick em the body must be combined with one of the three bases supplied as an accessory. All external screws
used are made of A2 stainless steel.

Installation
The luminaire is installed on a wall or ceiling via one of the two bases supplied as an accessory or via the plate that is always
supplied as an accessory.

Colour Weight (Kg)

White (01) | Black (04) | Grey (15) | Rust Brown (F5) 0.77

Mounting
wall arm|wall surface|ceiling surface

Notes
The product is compatible with: • MASTER PRO DMX. • QUICK DMX. • Third party DMX/RDM systems.
Complies with EN60598-1 and pertinent regulations

With accessory
installed

Technical data
lm system: 67 Life Time LED 1: 100,000h - L90 - B10 (Ta 25°C)
W system: 11.5 Life Time LED 2: 100,000h - L90 - B10 (Ta 40°C)
lm source: - Voltage [Vin]: 48
W source: - Lamp code: LED
Luminous efficiency (lm/W, 5.8 Number of lamps for optical 1
real value): assembly:
lm in emergency mode: - ZVEI Code: LED
Total light flux at or above 45 Number of optical 1
an angle of 90° [Lm]: assemblies:
Light Output Ratio (L.O.R.) 100 Intervallo temperatura from -20°C to 45°C.
[%]: ambiente:
CRI (minimum): 80 LED current [mA]: 315
Colour temperature [K]: 3000 Control: DMX-RDM
MacAdam Step: 2

S706_EN 1 / 2
Polar

Isolux

S706_EN 2 / 2
 Underscore InOut

Design iGuzzini iGuzzini

Last information update: February 2025

Product configuration: EA08

EA08: Side-Bend 10mm version - Warm white Led - 24Vdc - L=254mm

Product code
EA08: Side-Bend 10mm version - Warm white Led - 24Vdc - L=254mm

Technical description
Luminaire for indoor and outdoor architectural linear lighting – with warm white monochrome Leds – on a 24Vdc flexible white circuit,
length L=254mm. The led circuit is completely IP68 encapsulated with a white (outside) and milky finish (over light emission) high
performance polymer sheath: this material allows the device to be installed and used even at extreme temperatures: -30°C +45°C.
Underscore InOut SIDE-BEND can be used to create straight or curved lines on flat surfaces. Even, spotfree lighting is guaranteed
along the entire strip profile up to the end parts. On both ends (not the head), the product is supplied with a cable L=80mm with IP68
male and female connectors fitted with an anti-detachment locknut. The product is supplied with a stainless steel wire to stop the
body from misshaping as this may damage the led circuit. Easy to install and a robust design for difficult environments (for example,
it is salt water, UV and solvent resistant). Minimum curving radius 150mm for 10mm SIDE-BEND versions. The luminaire technical
characteristics conform to EN 60598-1 standards and particular requirements.

Installation
Surface-mounted (ceiling and wall) using accessories to be ordered separately. The installation accessories available include low
aluminium profiles with a double slot (L=250) that are used to secure the linear Underscore InOut, with a side exit for cables with
connectors. Aluminium low clips (L=40mm) and AISI 316 stainless steel low clips (L=40mm) ideal for curved sections are available.

Colour Weight (Kg)

White (01) 0.07

Mounting
wall arm|wall surface|ceiling surface

Wiring
24Vdc ±5% LED circuit. Constant voltage ballasts to be ordered separately, both IP20 and IP67 are available and suitable for outdoor
installation. DALI 120W 24V dimming interface available (code no. MWP3) or DALI/DMX/1-10V 12-48Vdc 4-channel dimming
interface with 6A per channel, (code no. 9639) suitable for both RGB Led and white Led versions. The ballast and led strip are
connected via cables with IP68 female connectors (L=115-1550-3050-5050mm) or IP68 male connectors (L=115-1500mm).

Notes
Underscore InOut can be powered in series up to a maximum length of L=7004mm. The product is not suitable for installation in
swimming pools and fountains. The lengths indicated can have a tolerance of +/- 4mm compared to the nominal length.

Complies with EN60598-1 and pertinent regulations

Technical data
lm system: 113 Life Time LED 1: 69,000h - L70 - B10 (Ta 25°C)
W system: 1.7 Life Time LED 2: 69,000h - L70 - B10 (Ta 40°C)
lm source: - Voltage [Vin]: 24
W source: - Lamp code: LED
Luminous efficiency (lm/W, 66.3 Number of lamps for optical 1
real value): assembly:
lm in emergency mode: - ZVEI Code: LED
Total light flux at or above 20 Number of optical 1
an angle of 90° [Lm]: assemblies:
Light Output Ratio (L.O.R.) 100 Intervallo temperatura from -30°C to 45°C.
[%]: ambiente:
CRI (minimum): 80 LED current [mA]: 14
Colour temperature [K]: 2600 Control: PWM
MacAdam Step: 3

Polar

EA08_EN 1 / 2
Isolux

EA08_EN 2 / 2
 Easy

Design iGuzzini iGuzzini

Last information update: February 2025

Product configuration: QF54.01

QF54.01: Ø 163 mm - neutral white - electronic - White

Product code
QF54.01: Ø 163 mm - neutral white - electronic - White

Technical description
Round fixed luminaire designed to use LED lamps with C.o.B. technology. Version with rim for surface-mounting. Reflector vacuum-
metallised with aluminium vapours with an anti-scratch protective layer. Dissipater made of painted grey die-cast aluminium. Product
complete with LED lamp in neutral white colour tone (4000K). General lighting beam.

Installation
Recessed using torsion springs which allow easy installation in false ceilings with thicknesses ranging from 1 mm to 20 mm.

Colour Weight (Kg)

White (01) 0.68

Mounting
ceiling surface

Wiring
product complete with electronic components

Notes

TPa version available on request, contact iGuzzini for more info

Complies with EN60598-1 and pertinent regulations

On the visible part of

the product once installed

Technical data
lm system: 2083 Colour temperature [K]: 4000
W system: 16.8 MacAdam Step: 2
lm source: 2450 Life Time LED 1: > 50,000h - L90 - B10 (Ta 25°C)
W source: 15 Lamp code: LED
Luminous efficiency (lm/W, 124 Number of lamps for optical 1
real value): assembly:
lm in emergency mode: - ZVEI Code: LED
Total light flux at or above 0 Number of optical 1
an angle of 90° [Lm]: assemblies:
Light Output Ratio (L.O.R.) 85 Control: On/off
[%]:
CRI (minimum): 80

Polar

QF54_01_EN 1 / 2
Utilisation factors

Luminance curve limit

UGR diagram

QF54_01_EN 2 / 2