2-Port Antenna Y1
Frequency Range 1695–2690
Dual Polarization X
HPBW 35°
Adjust. Electr. DT 2°–10°
set by hand or by optional RCU (Remote Control Unit)
2-Port Antenna 1695–2690 35° 19.5dBi 2°–10°T
Type No. 80010678
Highband Y1, connector 1– 2
1695 – 2690
Frequency Range MHz 1695 – 1880 1850 – 1990 1920 – 2170 2300 – 2400 2500 – 2690
Gain at mid Tilt dBi 18.6 19.2 19.4 19.8 19.6
Gain over all Tilts dBi 18.5 ± 0.4 19.1 ± 0.3 19.4 ± 0.3 19.7 ± 0.5 19.5 ± 0.9
Horizontal Pattern:
Azimuth Beamwidth ° 43 ± 3.1 39 ± 1.7 38 ± 1.3 36 ± 0.7 33 ± 0.8
Front-to-Back Ratio,
dB > 20 > 21 > 23 > 25 > 23
Total Power, ± 30°
Cross Polar Discrimination
dB > 22 > 23 > 21 > 20 > 11
at Boresight
Cross Polar Discrimination
dB > 15.0 > 16.5 > 16.5 > 13.0 > 7.5
over Sector
Vertical Pattern:
Elevation Beamwidth ° 7.8 ± 0.5 7.3 ± 0.2 7.1 ± 0.3 6.4 ± 0.3 5.8 ± 0.4
Electrical Downtilt
° 2.0 – 10.0
continuously adjustable
Tilt Accuracy ° < 0.5 < 0.2 < 0.2 < 0.2 < 0.2
First Upper Side Lobe
dB > 19 > 21 > 22 > 20 > 18
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 15 > 19 > 19 > 18 > 14
above Main Beam
Cross Polar Isolation dB > 28
Max. Effective Power W 200 (at 50 °C ambient temperature)
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
936.4970/a ngmn 04.19.01.00 Subject to alteration.
All specifications are subject to change without notice.
The latest specifications are available at www.kathreinusa.com 80010678 Page 1 of 3
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email:
[email protected] 2-Port Antenna
Electrical specifications, all systems Mechanical specifications
Impedance Ω 50 Input 2 x 7-16 female
VSWR < 1.5 Connector Position bottom
Return Loss dB > 14 Adjustment Mechanism 1x, Position bottom
Interband Isolation dB > 28 continuously adjustable
Passive Intermodulation dBc < –150 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal: 410 | 92
Polarization ° +45, –45 Wind Speed: 150 km/h) Maximal: 450 | 101
Max. Effective Power 400 (at 50 °C ambient Max. Wind Velocity km/h 200
W temperature) mph 124
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements. Height / Width / Depth mm 1272 / 235 / 69
inches 50.1 / 9.3 / 2.7
Category of M (Medium)
Mounting Hardware
Weight kg 9.2 / 11.4 (clamps incl.)
lb 20.3 / 25.1 (clamps incl.)
Packing Size mm 1617 / 257 / 103
inches 63.7 / 10.1 / 4.1
Scope of Supply Panel and 2 units of clamps
for 42 – 115 mm |
1.7– 4.5 inches diameter
Accessories (order separately if required) 64 | 2.5
Remarks Weight approx. Units per ∅
Type No. Description 9 | 0.4
mm | inches kg | lb antenna
731651 1 clamp Mast diameter: 28 – 60 | 1.1 - 2.4 0.8 | 1.8 2
85010002 1 clamp Mast diameter: 110 – 220 | 4.3 – 8.7 2.7 | 6.0 2
85010003 1 clamp Mast diameter: 210 – 380 | 8.3 – 15.0 4.8 | 10.6 2
737978 1 downtilt kit Downtilt angle: 0° – 15° 4.3 | 9.5 1
Accessories (included in the scope of supply)
738546 1 clamp Mast diameter: 42 – 115 | 1.7 – 4.5 1.1 | 2.4 2
1272 | 50.1
1304 | 51.3
1412 | 55.6
936.4970/a ngmn 04.19.01.00 Subject to alteration.
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material: Reflector screen: Aluminum. Radiator: Tin-plated zinc.
Flat fiberglass radome: Fiberglass material guarantees optimum
performance with regards to stability, stiffness, UV resistance and
painting. The color of the radome is grey.
All screws and nuts: Stainless steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Adjustment
mechanism
with integrated
scale
All dimensions in mm | inches
All specifications are subject to change without notice.
Page 2 of 3 80010678 The latest specifications are available at www.kathreinusa.com
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email:
[email protected] 2-Port Antenna
Layout of interface: 243 | 9.6
235 | 9.2 *
120 | 4.7
50 | 2.0
690
5-2 Til
69 t
69 | 2.7 *
78 | 3.1
48 | 1.9
Bottom view
* Dimensions refer to radome
All dimensions in mm | inches
Correlation Table
Frequency range Array Connector
1695 – 2690 MHz Y1 1–2
Y1
936.4970/a ngmn 04.19.01.00 Subject to alteration.
Order Information
Model Description
80010678 2-Port antenna with mounting bracket
80010678K 2-Port antenna with mounting bracket
and mechanical tilt bracket
Any previous data sheet issues have now become invalid.
All specifications are subject to change without notice.
The latest specifications are available at www.kathreinusa.com 80010678 Page 3 of 3
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email:
[email protected] Mounting Hardware
Clamp Included in the Scope of Supply
Suitable for mast diameter (mm) 42 – 115
[inches] [1.65 – 4.53]
Antenna – mast distance (mm) 20 – 25
[inches] [0.79 – 0.98]
Material of clamp and screws Hot-dip galvanized steel / stainless steel
Weight (kg) 1.1
[lb] [2.43]
152 [5.98]
100 [3.94]
[0.79–0.98]
40 [1.57]
72 [2.83]
20–25
40 [1.57]
15
2–1
4 4.53]
5–
[1.6
M10 MA = 25 Nm
M8 MA = 20 Nm
35 [1.38]
64 [2.52]
125 [4.92]
20–25
[0.79–0.98]
Subject to alteration.
936.3920/c
Please note: Kathrein does not recommend to use counter nuts. All dimensions in mm and [inches]
The additional nuts supplied are only meant as spares.
All specifications are subject to change without notice.
The latest specifications are available at www.kathreinusa.com 738546 Page 1 of 1
Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082
Phone: 214.238.8800 Fax: 214.238.8801 Email:
[email protected] General Instructions
for Adjustment Mechanism
Description of the adjustment mechanism (protective cap removed):
1
2
2
➀ Adjustment wheel with twist-lock ➀ Thread for fixing the protective To set the downtilt angle exactly,
function. cap or the RCU (Remote Control you must look horizontally at the
➁ Downtilt spindle with integrated Unit). scale. The lower edge of the gear-
scale. ➁ Gearwheel for RCU power drive. wheel must be used for alignment.
Manual adjustment procedure:
0° – max.°
max.° – 0°
Remove the protective cap. Set downtilt angle by rotating the Screw on the protective cap again.
adjustment wheel.
Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment:
Subject to alteration.
936.4020
For a description of RCU installation please refer to the respective data sheet.
Page 1 of 1
