04

RUBBER & COMPOSITE HOSE

 RUBBER & COMPOSITE HOSE
The Range
RUBBER HOSE - INDUSTRIAL Page 106
Size : 1/4’’ to 24’’

RUBBER HOSE - INDUSTRIAL OFFSHORE Page 124

Size : 2’’ to 12’’

RUBBER HOSE - LPG / GAS Page 129

Size : 1/2’’ to 4’’

RUBBER HOSE - HYDRAULIC Page131

Size : 3/16’’ to 4’’

RUBBER HOSE - HYGIENIC FOOD GRADE Page 137

Size : 1/2’’ to 4 5/16’’

COMPOSITE HOSE Page 134

Size : 3/4’’ to 12’’
1 2 3 4 5 6 7 8 9 10
RUBBER & COMPOSITE HOSE

105 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial
Multipurpose Low | Med | High

Flexibility
Part No.: IH-RMP
Colour: Red Cycle Life
Tube: Black smooth Nitrile rubber, resistant to 55% aromatic content Pressure Rating
Cover: Red smooth extruded rubber, abrasion & weather resistant
Reinforcement: Braided Synthetic Cord Chemical Resistance
Size Available: 5mm - 51mm Wall Thickness
Temperature: -25°C +100°C
Construction
Use:
This high quality multi-purpose hose is
suitable for conveying air, water, oil,
petroleum and various chemicals.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RMP-05 5 12 20 2000 0.16
IH-RMP-06 6 13 20 2000 0.17
IH-RMP-08 8 15 20 2000 0.20

1 2 3 4 5 6 7 8 9 10
IH-RMP-10 10 17 20 2000 0.24
IH-RMP-12 12 21 20 2000 0.34
IH-RMP-16 16 26 20 2000 0.53
IH-RMP-19 19 29 20 2000 0.60
IH-RMP-25 25 36 20 2000 0.80
IH-RMP-32 32 44 14 1400 1.28
IH-RMP-38 38 53 14 1400 1.49
IH-RMP-51 51 63 10 1000 1.65

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 106
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Yellow Air Low | Med | High

Flexibility
Part No.: IH-RYA
Colour: Yellow Cycle Life
Tube: Black smooth synthetic rubber, oil mist resistant Pressure Rating
Cover: Yellow smooth synthetic rubber, abrasion and weather resistant
Reinforcement: Plies of high strength synthetic cord Chemical Resistance
Size Available: 19mm - 102mm Wall Thickness
Temperature: -35°C +70°C
Construction
Use:
Heavy duty mandrel built air supply line.
The safety yellow cover makes it ideal for
use in underground mining, hire and
construction applications.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RYA-19 19 31 20 2000 0.71
IH-RYA-25 25 35 20 2000 0.90
IH-RYA-32 32 44 20 2000 1.85
1 2 3 4 5 6 7 8 9 10

IH-RYA-38 38 52 20 2000 1.30

IH-RYA-51 51 66 20 2000 1.52
IH-RYA-76 76 94 20 2000 2.22
IH-RYA-102 102 121 20 2000 4.00

Applications
RUBBER & COMPOSITE HOSE

107 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Steel Air Low | Med | High

Part No.: IH-RSA Flexibility

Colour: Yellow
Tube: Black smooth synthetic rubber, heat and oil mist resistant Cycle Life
Cover: Yellow smooth synthetic rubber, abrasion and weather resistant. Pressure Rating
Reinforcement: Plies of steel wire cord
Size Available: 19mm - 102mm Chemical Resistance
Temperature: -40°C +100°C Wall Thickness

Construction
Use:
This steel reinforced heavy-duty air hose
is suited to the most severe mining and
industrial applications. The high margin of
safety gives a long trouble-free service.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RSA-19 19 31 50 5000 0.74
IH-RSA-25 25 38 45 4500 0.91
IH-RSA-32 32 45 45 4500 1.19

1 2 3 4 5 6 7 8 9 10
IH-RSA-38 38 56 40 4000 1.51
IH-RSA-51 51 69 40 4000 2.40
IH-RSA-63 63 81 35 3500 2.90
IH-RSA-76 76 95 35 3500 4.68
IH-RSA-102 102 120 30 3000 7.34

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 108
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Water Delivery Low | Med | High

Part No.: IH-RWD Flexibility

Colour: Black
Tube: Black smooth synthetic rubber Cycle Life
Cover: Black smooth synthetic rubber, abrasion and weather resistant Pressure Rating
Reinforcement: Plies of high strength synthetic cord
Size Available: 12mm - 204mm Chemical Resistance
(Larger sizes upon Request)

Temperature: -35°C +70°C Wall Thickness

Construction
Use:
Medium-duty mandrel built rubber hose
suited for general purpose industrial water
transfer applications.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RWD-12 12 - 10 1000 0.35
IH-RWD-19 19 28 10 1000 0.54
IH-RWD-25 25 34 10 1000 0.66
1 2 3 4 5 6 7 8 9 10

IH-RWD-32 32 42 10 1000 0.93

IH-RWD-38 38 48 10 1000 1.07
IH-RWD-44 44 54 10 1000 1.39
IH-RWD-51 51 61 10 1000 1.43
IH-RWD-57 57 68 10 1000 1.65
IH-RWD-64 64 74 10 1000 1.81
IH-RWD-70 70 82 10 1000 2.18
IH-RWD-76 76 89 10 1000 2.30
IH-RWD-89 89 98 10 1000 3.13
IH-RWD-102 102 114 10 1000 3.75
IH-RWD-114 114 127 10 1000 3.91
IH-RWD-127 127 140 10 1000 4.12
IH-RWD-152 152 165 8 800 4.88
IH-RWD-204 204 213 8 800 7.74

Applications
RUBBER & COMPOSITE HOSE

109 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Water Suction Low | Med | High

Part No.: IH-RWS Flexibility

Colour: Black
Tube: Black smooth synthetic rubber Cycle Life
Cover: Black smooth synthetic rubber, abrasion and weather resistant Pressure Rating
Reinforcement: Braided synthetic cord incorporating a steel wire helix
Size Available: 19mm - 305mm Chemical Resistance
Temperature: -20°C +80°C Wall Thickness

Construction
Use:
A medium-duty suction hose suitable
for use in agricultural, construction and
mining industries. The hose is suitable for
water, sea water and light slurry in both
negative and positive pressure
applications.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RWS-19 19 31 10 1000 -
IH-RWS-25 25 36 10 1000 0.76
IH-RWS-32 32 43 10 1000 0.92

1 2 3 4 5 6 7 8 9 10
IH-RWS-38 38 49 10 1000 1.20
IH-RWS-44 44 56 10 1000 1.48
IH-RWS-51 51 63 10 1000 1.79
IH-RWS-57 57 70 10 1000 1.90
IH-RWS-64 64 77 10 1000 2.27
IH-RWS-76 76 89 10 1000 2.65
IH-RWS-89 89 102 10 1000 3.50
IH-RWS-102 102 118 10 1000 5.10
IH-RWS-114 114 132 10 1000 6.50
IH-RWS-127 127 146 10 1000 8.10
IH-RWS-152 152 170 5 500 9.30
IH-RWS-204 204 223 5 500 14.60
IH-RWS-254 254 282 5 500 19.20
IH-RWS-305 305 335 5 500 25.60

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 110
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Petroleum Delivery Low | Med | High

Part No.: IH-RPD Flexibility

Colour: Black
Tube: Black smooth synthetic rubber, 50% aromatic content Cycle Life
Cover: Black smooth oil resistant rubber Pressure Rating
Reinforcement: Plies of high strength synthetic cord with copper anti-static wire
Size Available: 19mm - 102mm Chemical Resistance
Temperature: -20°C +80°C Wall Thickness

Construction
Use:
Medium-duty, mandrel-built hose suited
for the transfer of oil and petroleum-based
products up to 30% aromatic content.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RPD-19 19 30 10 1000 0.58
IH-RPD-25 25 36 10 1000 0.64
IH-RPD-32 32 44 10 1000 0.88
1 2 3 4 5 6 7 8 9 10

IH-RPD-38 38 48 10 1000 1.07

IH-RPD-44 44 54 10 1000 1.36
IH-RPD-51 51 61 10 1000 1.43
IH-RPD-64 64 74 10 1000 1.81
IH-RPD-76 76 88 10 1000 2.39
IH-RPD-102 102 114 10 1000 3.75

Applications
RUBBER & COMPOSITE HOSE

111 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Chemical Suction Low | Med | High

Part No.: IH-RCS Flexibility

Colour: Blue
Tube: White smooth, ultra high molecular weight polyethylene Cycle Life
Cover: Blue smooth wrapped EPDM/SBR rubber, abrasion and weather resistant Pressure Rating
Reinforcement: High strength synthetic cord plus wire helix and anti-static copper wire
Size Available: 19mm - 102mm Chemical Resistance
Temperature: -20°C +80°C Wall Thickness

Construction
Use:
Special multi-purpose food quality suction
and delivery hose, suitable for oily or fatty
foods. Excellent for beer, wine, spirits up
to 98% concentration. Also suitable for
conveying a wide range of chemicals.

Standards:
FDA Standards
Specifications

Nominal Dia. Working Pressure Bend Radis Weight

Part Number
I.D (mm) O.D (mm) Bar kPa mm Kg/M
IH-RCS-19 19 31 16 1600 65 0.66
IH-RCS-25 25 38 16 1600 70 0.80
IH-RCS-32 32 44 16 1600 90 0.90

1 2 3 4 5 6 7 8 9 10
IH-RCS-38 38 51 16 1600 100 1.25
IH-RCS-51 51 65 16 1600 135 1.66
IH-RCS-64 64 78 16 1600 170 2.10
IH-RCS-76 76 92 16 1600 205 2.72
IH-RCS-102 102 118 16 1600 275 4.08

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 112
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Rubber FEP Liner Low | Med | High

Part No.: RFEP Flexibility

Colour: Green / Yellow Labelling
Tube: FEP liner Cycle Life
Cover: Green EPDM rubber cover, covered and reinforced with multi-layered rubber Pressure Rating
Reinforcement: Spiral-wound polyester cords and a double helix wire
Size Available: 1/2’’ - 6’’ Chemical Resistance
Temperature: -40°C +177°C Wall Thickness
Vacuum Resistance: Full Vacuum
Construction
Use:
Designed for extended use in hostile environments
involving severe chemical, thermal, and mechanical
stresses. Does not suffer aging or embrittlement,
even with extreme thermal cycling.

Standards
Pharmacopoeia Class VI, USDA, FDA-approved

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches O.D (mm) kPa bar mm kg.
RFEP-12 1/2’’ 24.63 3447 34.47 36.5 1.19
RFEP-20 3/4’’ 32.25 3447 34.47 36.5 1.77
RFEP-25 1’’ 37.59 2757 27.57 76.2 1.87
1 2 3 4 5 6 7 8 9 10

RFEP-38 1 1/2’’ 51.81 2413 24.13 114.3 2.95

RFEP-50 2’’ 64.51 2068 20.68 177.8 3.97
RFEP-65 2 1/2’’ 77.21 1378 13.78 228.6 5.27
RFEP-75 3’’ 96.77 1378 13.78 889.0 10.13
RFEP-100 4’’ 124.20 1034 10.34 1079.5 13.53
Encapsulated fitting options:

Applications
RUBBER & COMPOSITE HOSE

113 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Muff Coupling Low | Med | High

Part No.: IH-RMC Flexibility

Colour: Black
Tube: Black smooth abrasion resistant rubber Cycle Life
Cover: Black smooth synthetic rubber, abrasion and weather resistant Pressure Rating
Reinforcement: Plies of high strength synthetic cord incorporating a steel wire helix
Size Available: 51mm - 354mm Chemical Resistance
Temperature: -35°C +70°C Wall Thickness

Construction
Use:
Suction and delivery of abrasive
slurry in mining and extractive industries.
Muff Coupling hose has many advantages
over conventional material handling hoses
which have inbuilt flanges.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RMC-51 51 71 7 700 4.90
IH-RMC-64 64 81 7 700 5.88
IH-RMC-75 75 103 7 700 6.90

1 2 3 4 5 6 7 8 9 10
IH-RMC-102 102 128 7 700 8.60
IH-RMC-127 127 157 7 700 8.95
IH-RMC-152 152 182 7 700 10.15
IH-RMC-204 204 236 7 700 14.80
IH-RMC-254 254 288 7 700 20.30
IH-RMC-305 305 344 7 700 34.36
IH-RMC-354 354 390 7 700 39.11

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 114
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Xtreme Steel Steam Low | Med | High

Part No.: IH-RSS Flexibility

Colour: Black
Tube: Black smooth EPDM heat resistant rubber Cycle Life
Cover: Red smooth EPDM heat resistant rubber Pressure Rating
Reinforcement: Plies of steel wire cord
Size Available: 13mm - 51mm Chemical Resistance
Temperature: -40°C +236°C Wall Thickness

Construction
Use:
Mandrel-built, high-pressure, wire-braided
steam hose designed for service with
saturated steam at a maximum pressure of
12BAR (250psi). Not recommended for use
on steam cleaners.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RSS-13 13 25 17 1700 0.53
IH-RSS-19 19 32 17 1700 0.68
IH-RSS-25 25 39 17 1700 0.90
1 2 3 4 5 6 7 8 9 10

IH-RSS-32 32 46 17 1700 1.30

IH-RSS-38 38 54 17 1700 1.60
IH-RSS-51 51 67 17 1700 2.20

Safety Warning:
Exposure to steam is dangerous. If not properly controlled, steam can cause damage to property, serious injury and even
death. You must select the proper steam hose for the given application. Also appropriate installation, usage and maintenance
of the steam hose you select will contribute to increasing operator safety.

Applications
RUBBER & COMPOSITE HOSE

115 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

FRAS Suction Low | Med | High

Part No.: IH-RFS Flexibility

Colour: Black
Tube: FRAS black smooth synthetic rubber, oil mist resistant Cycle Life
Cover: FRAS black smooth synthetic rubber, abrasion and weather resistant Pressure Rating
Reinforcement: Plies of high strength synthetic cord incorporating a steel wire helix.
Size Available: 25mm - 102mm Chemical Resistance
Temperature: -35°C +70°C Wall Thickness

Construction
Use:
Built to AS2660 Class B. This heavy-duty,
fire-resistant, anti-static suction hose is
ideally suited for use in high fire risk
industries.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RFS-25 25 36 10 1000 -
IH-RFS-51 51 65 10 1000 2.10
IH-RFS-76 76 91 10 1000 3.27

1 2 3 4 5 6 7 8 9 10
IH-RFS-102 102 118 10 1000 5.18

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 116
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

FRAS Delivery Low | Med | High

Part No.: IH-RFD Flexibility

Colour: Black
Tube: FRAS black smooth synthetic rubber, oil mist resistant Cycle Life
Cover: FRAS black smooth synthetic rubber, abrasion and weather resistant Pressure Rating
Reinforcement: Plies of high strength synthetic cord
Size Available: 12mm - 102mm Chemical Resistance
Temperature: -35°C +70°C Wall Thickness

Construction
Use:
Built to AS2660 Class B, this heavy-duty,
fire-resistant, anti-static air hose is ideally
suited for use in the coal mining industry
and other high fire risk areas.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RFD-12 12 23 20 2000 0.37
IH-RFD-19 19 31 20 2000 0.63
IH-RFD-25 25 37 20 2000 0.78
1 2 3 4 5 6 7 8 9 10

IH-RFD-32 32 46 20 2000 -
IH-RFD-38 38 52 20 2000 1.20
IH-RFD-51 51 67 20 2000 2.21
IH-RFD-64 64 81 20 2000 3.37
IH-RFD-76 76 92 20 2000 4.15
IH-RFD-102 102 122 20 2000 5.50

Applications
RUBBER & COMPOSITE HOSE

117 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Super Abrasion Resistant Suction/Delivery Hose Low | Med | High

Flexibility
Colour: Black
Tube: NR/BR blend Super Abrasion Resistant ( S A R ) Rubber Cycle Life
Cover: NR/BR blend Super Abrasion Resistant ( S A R ) Rubber Pressure Rating
Reinforcement: Spiral Synthetic Fabric with steel wire for full suction capabilities
Size Available: 2’’ - 24’’ Chemical Resistance
Temperature: -30°C +70°C Wall Thickness

Construction
Use:
For suction, and high pressure when
discharging of abrasive slurry materials in
the mining, dredging and other industries

Specifications

Size Max. Working Pressure Weight

inch O.D (mm) PSI kPa Kg/m
2’’ 76 200 1379 3.4
3’’ 102 200 1379 5.0
4’’ 129 200 1379 6.8
5’’ 158 200 1379 9.2
6’’ 184 200 1379 12.8
8’’ 238 200 1379 18.8

1 2 3 4 5 6 7 8 9 10
10’’ 292 200 1379 24.4
12’’ 344 200 1379 32.4
14’’ 394 200 1379 34.2
16’’ 448 200 1379 46.6
18’’ 501 200 1379 53.6
20’’ 551 200 1379 59.4
24’’ 660 200 1379 83.4
End Connections

Beaded (Rotating) Flanges Fixed Flanges Double Flanges Spigot Flanges

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 118
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Oil Suction & Discharge Hose Low | Med | High

Flexibilty
Colour: Black
Tube: Synthetic rubber compound with an aromatic content up to 60% Cycle Life
Cover: Weathering and abrasion resistant rubber compound Pressure Rating
Reinforcement: Helical steel wire to resist collapse and crush loads
Electrical Continuity: Electrically continuous or discontinuous as required. Chemical Resistance
Size Available: 2’’ - 24’’ Wall Thickness
Temperature: -20°C to +82°C
Construction
Use:
Lightweight, flexible hoses offering easy handling. Generally
used at dockside and jetty locations where the working
conditions do not call for high crush resistance or tensile strength.
BS EN 1765: 2004 Type S15

Specifications

Size Max. Working Pressure Burst Pressures Weight

inch O.D (mm) PSI kPa PSI kPa Kg/m
2’’ 79 215 1480 870 6000 3.9
2 1/2’’ 92 215 1480 870 6000 4.7
3’’ 105 215 1480 870 6000 5.8
4’’ 132 215 1480 870 6000 8.1
5’’ 158 215 1480 870 6000 9.9
6’’ 189 215 1480 870 6000 14.9
1 2 3 4 5 6 7 8 9 10

8’’ 245 215 1480 870 6000 23.1

10’’ 297 215 1480 870 6000 30.2
12’’ 352 215 1480 870 6000 39.1
16’’ 454 215 1480 870 6000 76.8

End Connections

Beaded (Rotating) Flanges Fixed Flanges Double Flanges Spigot Flanges

Applications
RUBBER & COMPOSITE HOSE

119 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial
Petrol & Oil Suction/Discharge Hose Low | Med | High

Flexibilty
Colour: Black
Tube: NBR Cycle Life
Cover: NBR / PVC Pressure Rating
Reinforcement: Spiral Synthetic Fabric and High Tensile Steel Wire
Size Available: 3/4’’ - 4’’ Chemical Resistance
Temperature: -30°C +80°C Wall Thickness

Construction
Use:
Suitable for suction and delivery of
petroleum and petroleum products having
aromatic content not greater than 50%.

Specifications

Size Max. Working Pressure Weight

inch O.D (mm) PSI kPa Kg/m
3/4’’ 31.7 100 689 0.81
1’’ 38.0 100 689 0.98
1 1/4’’ 44.1 100 689 1.18
1 1/2’’ 53.7 100 689 1.35
2’’ 63.4 100 689 1.83
2 1/2’’ 77.7 100 689 2.42

1 2 3 4 5 6 7 8 9 10
3’’ 90.4 100 689 2.90
3 1/2’’ 104.1 100 689 3.38
4’’ 116.8 100 689 4.04

End Connections

Beaded (Rotating) Flanges Fixed Flanges Double Flanges Spigot Flanges

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 120
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Petrol & Oil Transfer Hose Low | Med | High

Flexibilty
Colour: Black
Tube: NBR Cycle Life
Cover: NBR / PVC Pressure Rating
Reinforcement: Spiral Synthetic Fabric / Copper Anti-Static Wire
Size Available: 3/4’’ - 4’’ Chemical Resistance
Temperature: -30°C +80°C Wall Thickness

Construction
Use:
Suitable for transfer of petroleum and
petroleum products having aromatic
content not greater than 50%.

Specifications

Size Max. Working Pressure Weight

inch O.D (mm) PSI kPa Kg/m
3/4’’ 31.7 150 1034 0.65
1’’ 39.6 150 1034 0.89
1 1/4’’ 45.7 150 1034 1.07
1 1/2’’ 52.3 150 1034 1.20
2’’ 65.2 150 1034 1.55
2 1/2’’ 77.7 150 1034 1.82
1 2 3 4 5 6 7 8 9 10

3’’ 90.8 150 1034 2.18

3 1/2’’ 107.1 150 1034 3.29
4’’ 119.8 150 1034 3.79

End Connections

Beaded (Rotating) Flanges Fixed Flanges Double Flanges Spigot Flanges

Applications
RUBBER & COMPOSITE HOSE

121 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial
Sand & Shot Blast Suction/Discharge Hose Low | Med | High

Flexibilty
Colour: Black
Tube: NR/BR blend Super Abrasion Resistant ( S A R ) Rubber Cycle Life
Cover: NR/BR blend Super Abrasion Resistant ( S A R ) Rubber Pressure Rating
Reinforcement: Spiral Synthetic Fabric
Size Available: 1/2’’ - 3’’ Chemical Resistance
Temperature: -30°C +70°C Wall Thickness

Construction
Use:
Used for suction or discharge of water
and light slurry

Specifications

Size Max. Working Pressure Weight

inch O.D (mm) PSI kPa Kg/m
1/2’’ 33 150 1034 0.98
3/4’’ 40 150 1034 1.23
1’’ 48 150 1034 1.72
1 1/4’’ 55 150 1034 2.06
1 1/2’’ 61 150 1034 2.29
2’’ 76 150 1034 3.14

1 2 3 4 5 6 7 8 9 10
3’’ 103 150 1034 4.62

End Connections

Beaded (Rotating) Flanges Fixed Flanges Double Flanges Spigot Flanges

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 122
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Industrial

Contractors Suction Low | Med | High

Part No: IH-RWCS Flexibility

Colour: Black
Tube: Black smooth synthetic rubber. Cycle Life
Cover: Black corrugated synthetic rubber, abrasion and weather resistant. Pressure Rating
Reinforcement: Plies of high strength synthetic cord incorporating a steel wire helix.
Size Available: 76mm - 305mm Chemical Resistance
Temperature: -35°C +70°C Wall Thickness

Construction
Use:
Highly flexible corrugated rubber hose
suitable for the transfer of water in
negative pressure applications. Lengths
incorporate cuffed ends for ease of
inserting hose fitting.

Specifications

Nominal Dia. Working Pressure Weight

Part Number
I.D (mm) O.D (mm) Bar kPa Kg/M
IH-RWCS-76 76 95 10 1000 3.52
IH-RWCS-102 102 123 10 1000 4.59
IH-RWCS-152 152 176 10 1000 7.86
1 2 3 4 5 6 7 8 9 10

IH-RWCS-204 204 240 10 1000 11.70

IH-RWCS-254 254 290 10 1000 16.70
IH-RWCS-305 305 - 10 1000 -

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
123
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Offshore
Introduction
Pacific Hoseflex has the capabilities to supply the complete marine oil and gas fluid transfer range.
The product range consists of:

Suction/Delivery Abrasive material Suction/Discharge Mud and Oil

Size : 76m to 127mm Size : 51mm to 203mm
Material : SR/SBR rubber Material : PVC/BR rubber
Temperature: -25°C +70°C Temperature: -20°C +90°C

Suction/Discharge Potable water Composite LNG/LPG

Size : 51mm to 102mm Size : 20mm to 300mm
Material : IIR rubber (food quality) Material : Polypropilene films
Temperature: -40°C +100°C 316/304 Stainless Steel wire

Full bore Marine Breakaway Coupling Marine Breakaway Coupling

Size : 50mm to 200mm Size : 50mm to 150mm
Material : 316 Stainless Steel Material : 316 Stainless Steel

Breakaway Coupling Dry Disconnect Coupling Hose Unit

Size : 12mm - 300mm Size : 25mm to 150mm
Material : 316 Stainless Steel Material : 316 Stainless Steel / Aluminium

Dry Disconnect Tank Unit Emergency Release Coupling

Size : 25mm to 150mm Size : 50mm to 300mm
Material : 316/304 Stainless Steel Material : 316 Stainless Steel

1 2 3 4 5 6 7 8 9 10
Flange Camlock Coupling Swivel Joint
Size : 100mm to 600mm Size : 12mm to 400mm
Material : Carbon Steel / 316 Stainless steel Material : 316 Stainless Steel, Carbon steel,
Aluminium

RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 124
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Offshore

Suction/Delivery Abrasive hose Low | Med | High

Part No.: IH-AH-50 Flexibility

Colour: Black
Tube: NR/SBR rubber Cycle Life
Cover: Black EPDM, weather, ozone and sea-water resistant. Pressure Rating
Reinforcement: High strength synthetic cord, steel helix wire and antistatic copper wire
Size Available: 3” - 5” Chemical Resistance
Temperature: -25°C +70°C Wall Thickness

Construction
Use:
Hardwall hose designed to convey barite and
bentonite and other abrasive materials from
ship to oil rigs to consolidate the oil well. It
withstands a tensile stress of 4 tons.

Specifications
Internal Outside Min. Bend Max. Working Min. Burst
Part Size Vacuum
Diameter Diameter Radius Pressure Pressure
Number
inch mm mm mm bar PSI bar PSI mm hg
IH-AH-76 3’’ 76 96 390 10 150 40 600 675
IH-AH-102 4’’ 102 124 555 10 150 40 600 675
1 2 3 4 5 6 7 8 9 10

IH-AH-127 5’’ 127 150 730 10 150 40 600 675

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
125
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Offshore

Drilling Mud and Oil Hose Low | Med | High

Flexibilty
Colour: Black
Tube: Black, smooth, PVC/NBR rubber Cycle Life
Cover: CR flame resistant rubber, resistant to weather, abrasion, oil and sea water Pressure Rating
Reinforcement: High strength synthetic cord plus antistatic copper wire
Size Available: 2’’ - 8’’ Chemical Resistance
Temperature: -20°C +90°C Wall Thickness

Construction
Use:
Hardwall hose for the suction and delivery of
petroleum products with aromatic content up
to 50% and drilling mud mixed with oil.

Standards:
PDA ABS Nr. 15-GE1415740-PDA
ASTM C-542 - Flame restardant

Specifications
Internal Diam- Outside Diam- Max. Working Min. Burst
Part Size
eter eter Pressure Pressure
Number
inch mm mm bar PSI bar PSI
IH-DMO-50 2’’ 51 65 17 225 52 780
IH-DMO-76 3’’ 76 91.5 17 225 52 780

1 2 3 4 5 6 7 8 9 10
IH-DMO-102 4’’ 102 119 17 225 52 780
IH-DMO-127 5’’ 127 145.5 17 225 52 780
IH-DMO-152 6’’ 152 174 17 225 52 780
IH-DMO-203 8’’ 203 225 17 225 52 780

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 126
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Offshore

Suction/Discharge Potable Water Hose Low | Med | High

Part No: IH-PW-50 Flexibility

Colour: Orange
Tube: IIR rubber Cycle Life
Cover: EDPM rubber, weathering, ozone and sea-water resistant. Pressure Rating
Reinforcement: High strength synthetic cord divided by a layer of rubber plus steel helix
wire. Chemical Resistance
Size Available: 2”- 4” Wall Thickness
Temperature: -40°C +100°C
Construction
Use:
Hardwall hose used for the suction and delivery
of drinking water from ship to oil rig.

Standards:
PDA ABS Nr. 15-GE1415740-PDA
Reg. EC 1935/04 and EC 2023/06
Phthalates free
PAHs free (acc. to ZEK 01.4-08 Cat. 1)
Bisphenol A free
FDA tit.21 art
177.2600 aqueous foods
BfR XXI Cat.2 foods
1 2 3 4 5 6 7 8 9 10

Specifications

Internal Outside Min. Bend Max. Working Min. Burst

Part Size Vacuum
Diameter Diameter Radius Pressure Pressure
Number
inch mm mm mm bar PSI bar PSI mm hg
IH-PW-50 2’’ 51 70 280 20 300 80 1200 675
IH-PW-76 3’’ 76 95.5 400 20 300 80 1200 675
IH-PW-102 4’’ 102 125 550 20 300 80 1200 675

Tensile breaking load:

2000 kgf for inside diameter 2”
4000 kgf for inside diameter 3”
7000 kgf for all other diameters.

Applications
RUBBER & COMPOSITE HOSE

___ ________________________________________________________________________________________________________________
127
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Offshore

Suction/Discharge Mud and Oil Hose Low | Med | High

Flexibilty
Colour: Black
Tube: PVC/BR rubber Cycle Life
Cover: CR flame resistant rubber, resistant to weather, abrasion, oil and sea water Pressure Rating
Reinforcement: High strength synthetic cord, steel helix wire and antistatic copper
wire Chemical Resistance
Size Available: 2’’ - 8’’ Wall Thickness
Temperature: -20°C +90°C
Construction
Use:
Hardwall hose for the suction and delivery of
petroleum products with aromatic content up
to 50% and drilling mud mixed with oil.

Standards:
PDA ABS Nr. 15-GE1415740-PDA
ASTM C-542 - Flame restardant

Specifications
Internal Outside Min. Bend Max. Working Min. Burst
Part Size Vacuum
Diameter Diameter Radius Pressure Pressure
Number
inch mm mm mm bar PSI bar PSI mm hg
IH-MO-50 2’’ 51 68.5 300 20 300 80 1200 675
IH-MO-76 3’’ 76 95 390 20 300 80 1200 675

1 2 3 4 5 6 7 8 9 10
IH-MO-102 4’’ 102 123 550 20 300 80 1200 675
IH-MO-127 5’’ 127 151.5 730 20 300 80 1200 675
IH-MO-152 6’’ 152 179 910 20 300 80 1200 675
IH-MO-203 8’’ 203 239 1340 20 300 80 1200 675

Tensile breaking load:

2000 kgf for inside diameter 2”
4000 kgf for inside diameter 3”
7000 kgf for all other diameters.

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 128
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER
RUBBER & COMPOSITE
& COMPOSITE HOSE
HOSE
Rubber Hose - LPG / Gas

LPG EN1762 Low | Med | High

Part No.: IH-LPG-EN1762 Flexibility

Colour: Black / Yellow Labelling
Tube: NBR Special, Black, Smooth, Electrically Conductive Cycle Life
Cover: CR,abrasion resistant, oil and weather resistant, cloth impression, pin pricked. Pressure Rating
Reinforcement: Textile braided (sizes >75mm – wrapped), 2 crossed copper wires
Size Available: 3/4’’ - 4’’ Chemical Resistance
Temperature: -35°C +70°C Wall Thickness

Construction
Use:
Suitable for delivery of Liquefied
Petroleum Gas, LPG (Liquid or Gas) and
Natural Gas.

Standards
EN1762

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa bar mm kg.
IH-LPG-EN1762-12 1/2’’ 13 24 2500 25 160 0.39
IH-LPG-EN1762-20 3/4’’ 19 32 2500 25 180 0.62
1 2 3 4 5 6 7 8 9 10

IH-LPG-EN1762-25 1’’ 25 38 2500 25 200 0.77

IH-LPG-EN1762-32 1 1/4’’ 32 46 2500 25 250 1.04
IH-LPG-EN1762-38 1 1/2’’ 38 54 2500 25 320 1.32
IH-LPG-EN1762-50 2’’ 51 67 2500 25 400 1.76
IH-LPG-EN1762-80 3’’ 76 93 2500 25 650 2.70
IH-LPG-EN1762-100 4’’ 102 124 2500 25 800 4.43

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

RUBBER & COMPOSITE HOSE

Applications

129 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - LPG / Gas
RLPG
Low | Med | High
Part No.: IH-RLPG-C / IH-RLPG-H
Flexibility
Tube: NBR Special, black, smooth, electrically conductive
Reinforcement: Textile braided with 2 crossed copper wires Cycle Life
Cover: CR, black, electrically conductive, abrasion resistant, oil &
Pressure Rating
weather resistant, cloth impression, pin pricked.
Size Available: 1/2’’ - 4’’ Class C Chemical Resistance
3/4’’ - 4’’ Class H
Wall Thickness
Temperature: -20°C to +65°C Class C
-50°C to +65°C Class H
Construction
Use:
Suitable for delivery and transfer of Liquefied
Petroleum Gas, LPG (Liquid or Gas), Natural Gas
and Town Gas
Standards:
AGA approved – AS/NZS 1869
EN 1762
DVGW NG-4612BO0255, ISO 4080 – method 1
Specifications
Class C Nominal Dia. Working Pressure Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number Inches I.D (mm) O.D (mm) kPa bar kPa bar mm kg.
IH-RLPG-12-C 1/2’’ 12.7 22.7 2600 26 10400 104 100 0.42
IH-RLPG-16-C 5/8’’ 16 26.3 2600 26 10400 104 150 0.55
IH-RLPG-19-C 3/4’’ 19 31 2600 26 10400 104 150 0.65
IH-RLPG-25-C 1’’ 25 38 2600 26 10400 104 200 0.80
IH-RLPG-32-C 1 1/4’’ 32 45 2600 26 10400 104 250 1.05

1 2 3 4 5 6 7 8 9 10
IH-RLPG-38-C 1 1/2’’ 38 52 2600 26 10400 104 320 1.30
IH-RLPG-50-C 2’’ 50 66 2600 26 10400 104 400 1.90
IH-RLPG-75-C 3’’ 75 93 2600 26 10400 104 650 2.95
IH-RLPG-100-C 4’’ 100 120 2600 26 10400 104 800 4.50

Class H Nominal Dia. Working Pressure Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number Inches I.D (mm) O.D (mm) kPa bar kPa bar mm kg.
IH-RLPG-19-H 3/4’’ 19 31 2600 26 10400 104 150 0.65
IH-RLPG-25-H 1’’ 25 38 2600 26 10400 104 200 0.80
IH-RLPG-32-H 1 1/4’’ 32 45 2600 26 10400 104 250 1.05
IH-RLPG-38-H 1 1/2’’ 38 52 2600 26 10400 104 320 1.30
IH-RLPG-50-H 2’’ 50 66 2600 26 10400 104 400 1.90
IH-RLPG-75-H 3’’ 75 93 2600 26 10400 104 650 2.95
IH-RLPG-100-H 4’’ 100 120 2600 26 10400 104 800 4.50

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 130
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hydraulic
SAE 100 R1AT Low | Med | High

Part No.: IH-R1AT Flexibility

Colour: Black
Tube: Synthetic oil resistant rubber. Cycle Life
Cover: Synthetic rubber - abrasion, ozone and weather resistant. Pressure Rating
Reinforcement: 1 high tensile steel wire braid.
Size Available: 1/4’’ - 4’’ Chemical Resistance
Temperature: -40°C +120°C Wall Thickness

Construction
Use:
High pressure hydraulic oils, air and water.

Standards:
EN 853 1SN

Specifications

Size Nominal Dia. Max. Working Pressure Min. Burst Pressure Bend Radius
Part Number
inch I.D (mm) O.D (mm) Bar kPa Bar kPa mm
IH-R1AT-04 1/4’’ 6.4 13.4 225 22500 900 90000 100
IH-R1AT-05 5/16’’ 7.9 50 215 21500 850 85000 105
IH-R1AT-06 3/8’’ 9.5 17.4 180 18000 720 72000 130
1 2 3 4 5 6 7 8 9 10

IH-R1AT-08 1/2’’ 12.7 20.3 160 16000 640 64000 180

IH-R1AT-10 5/8’’ 15.9 23.7 130 13000 520 52000 200
IH-R1AT-12 3/4’’ 19.0 27.7 105 10500 420 42000 240
IH-R1AT-16 1’’ 25.4 35.6 88 8800 352 35200 300
IH-R1AT-20 1 1/4’’ 31.8 43 63 6300 252 25200 420
IH-R1AT-24 1 1/2’’ 38.1 50.4 50 5000 200 20000 500
IH-R1AT-32 2’’ 50.8 63.5 40 4000 160 16000 630
IH-R1AT-38 2 3/8’’ 60.3 75 25 2500 100 10000 762
IH-R1AT-40 2 1/2’’ 63.5 79.5 25 2500 100 10000 762
IH-R1AT-48 3’’ 76.2 94.4 20 2000 80 8000 915
IH-R1AT-56 3 1/2’’ 90 105.5 15 1500 60 6000 1067
IH-R1AT-64 4’’ 101.6 177 10 1000 40 4000 1105

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
131
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hydraulic

SAE 100 R2AT Low | Med | High

Part No.: IH-R2AT Flexibility

Colour: Black
Tube: Synthetic oil resistant rubber. Cycle Life
Cover: Synthetic rubber - abrasion, ozone and weather resistant. Pressure Rating
Reinforcement: 2 high-tensile steel wire braids.
Size Available: 1/4’’ - 4’’ Chemical Resistance
Temperature: -40°C +120°C Wall Thickness

Construction
Use:
High pressure hydraulic oils, air and water.

Standards:
EN 853 2SN

Specifications

Size Nominal Dia. Max. Working Pressure Min. Burst Pressure Bend Radius
Part Number
inch I.D (mm) O.D (mm) Bar kPa Bar kPa mm
IH-R2AT-04 1/4’’ 6.4 15.1 400 40000 1600 160000 100
IH-R2AT-05 5/16’’ 7.9 16.7 350 35000 1400 140000 115

1 2 3 4 5 6 7 8 9 10
IH-R2AT-06 3/8’’ 9.5 19.1 330 33000 1320 132000 130
IH-R2AT-08 1/2’’ 12.7 22.2 276 27600 1103 110300 180
IH-R2AT-10 5/8’’ 15.9 25.4 250 25000 1000 100000 200
IH-R2AT-12 3/4’’ 19.0 29.4 215 21500 860 86000 240
IH-R2AT-16 1’’ 25.4 37.3 165 16500 660 66000 300
IH-R2AT-20 1 1/4’’ 31.8 48.3 125 12500 500 50000 420
IH-R2AT-24 1 1/2’’ 38.1 54.7 90 9000 360 36000 500
IH-R2AT-32 2’’ 50.8 67.4 80 8000 320 32000 630
IH-R2AT-38 2 3/8’’ 60.3 75.8 70 7000 280 28000 762
IH-R2AT-40 2 1/2’’ 63.5 82.5 69 6900 276 27600 762
IH-R2AT-48 3’’ 76.2 96 45 4500 179 17900 915
IH-R2AT-56 3 1/2’’ 90 107.5 28 2800 110 11000 1067
IH-R2AT-64 4’’ 101.6 118.5 25 2500 101 10100 1105
RUBBER & COMPOSITE HOSE

Applications
HOSE

___________________________________________________________________________________________________________________ 132
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hydraulic

SAE 100 R6 Low | Med | High

Part No.: IH-RR6 Flexibility

Colour: Black
Tube: Synthetic oil resistant rubber. Cycle Life
Cover: Synthetic rubber - abrasion, ozone and weather resistant. Pressure Rating
Reinforcement: 1 textile braid.
Size Available: 1/4’’ - 1’’ Chemical Resistance
Temperature: -40°C +120°C Wall Thickness

Construction
Use:
Low pressure hydraulic oils, air and water.

Standards:
EN 854

Specifications

Size Nominal Dia. Max. Working Pressure Min. Burst Pressure Bend Radius
Part Number
inch I.D (mm) O.D (mm) Bar kPa Bar kPa mm
IH-RR6-04 1/4’’ 6.4 12.7 28 2800 110 11000 64
IH-RR6-05 5/16’’ 7.9 14.3 28 2800 110 11000 76
IH-RR6-06 3/8’’ 9.5 15.9 28 2800 110 11000 76
1 2 3 4 5 6 7 8 9 10

IH-RR6-08 1/2’’ 12.7 19.8 28 2800 110 11000 102

IH-RR6-10 5/8’’ 15.9 23 24 2400 97 9700 127
IH-RR6-12 3/4’’ 19.0 26 21 2100 83 8300 152
IH-RR6-16 1’’ 25.4 32.5 13 1300 52 5200 230

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
133
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hydraulic

SAE 100 R7 Low | Med | High

Part No.: IH-RR7 Flexibility

Colour: Black
Tube: Unplasticised polyester tube. Cycle Life
Cover: Black polyurethane outer cover. Pressure Rating
Reinforcement: Single braid of polyester fibre.
Size Available: 3/16’’ - 1’’ Chemical Resistance
Temperature: -40°C +100°C Wall Thickness

Construction
Use:
An all-purpose medium pressure hose
suitable for many hydraulic and pneumatic
systems. Compatible with hydraulic oils,
grease, fuel oils, mineral oils and most
phosphate esters.
Standards:
EN 853 2SN

Specifications

Size Nominal Dia. Max. Working Pressure Min. Burst Pressure Bend Radius
Part Number
inch I.D (mm) O.D (mm) Bar kPa Bar kPa mm
IH-RR7-03 3/16’’ 4.7 10.5 207 20700 827 82700 75
IH-RR7-04 1/4’’ 6.4 12.7 190 19000 190 19000 100
IH-RR7-06 3/8’’ 9.6 16.3 155 15500 620 62000 127

1 2 3 4 5 6 7 8 9 10
IH-RR7-08 1/2’’ 12.7 20.1 138 13800 552 55200 178
IH-RR7-10 5/8’’ 15.9 24.4 103 10300 412 41200 203
IH-RR7-12 3/4’’ 19.0 26.4 86 8600 345 34500 254
IH-RR7-16 1’’ 25.4 33.3 69 6900 276 27600 305

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 134
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hydraulic
SAE 100 R12 Low | Med | High

Part No.: IH-RR12 Flexibility

Colour: Black
Tube: Synthetic oil resistant rubber. Cycle Life
Cover: Synthetic rubber - abrasion, ozone and weather resistant. Pressure Rating
Reinforcement: 4 high tensile steel wire spirals.
Size Available: 3/8’’ - 2’’ Chemical Resistance
Temperature: -40°C +100°C Wall Thickness

Construction
Use:
Very high pressure hydraulics.

Standards:
EN 856

Specifications

Size Nominal Dia. Max. Working Pressure Min. Burst Pressure Bend Radius
Part Number
inch I.D (mm) O.D (mm) Bar kPa Bar kPa mm
IH-RR12-06 3/8’’ 9.5 20.1 276 27600 1100 110000 127
IH-RR12-08 1/2’’ 12.7 23.6 276 27600 1100 110000 178
IH-RR12-10 5/8’’ 15.9 27.2 276 27600 1100 110000 203
1 2 3 4 5 6 7 8 9 10

IH-RR12-12 3/4’’ 19.0 30.5 276 27600 1100 110000 241

IH-RR12-16 1’’ 25.4 37.8 276 27600 1100 110000 305
IH-RR12-20 1 1/4’’ 31.8 46.8 207 20700 825 82500 419
IH-RR12-24 1 1/2’’ 38.1 53.3 172 17200 625 62500 508
IH-RR12-32 2’’ 50.8 66.5 172 17200 625 62500 635

Applications
RUBBER & COMPOSITE HOSE

___ ________________________________________________________________________________________________________________
135
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hydraulic

SAE 100 R13/EN856 Low | Med | High

Part No.: IH-RR13 Flexibility

Colour: Black
Tube: Oil resistant synthetic rubber. Cycle Life
Cover: Synthetic rubber - abrasion, ozone and weather resistant. Pressure Rating
Reinforcement: 4 or 6 high tensile steel wire spirals.
Size Available: 3/8’’ - 2’’ Chemical Resistance
Temperature: -40°C +100°C Wall Thickness

Construction
Use:
Extremely high pressure hydraulics.

Standards:
EN 856

Specifications

Size Nominal Dia. Braid Layers Max. Working Pressure Min. Burst Pressure Bend Radius
Part Number
inch I.D (mm) O.D (mm) No. Bar kPa Bar kPa mm
IH-RR13-06 3/8’’ 9.5 22.4 4 690 69000 2760 276000 152
IH-RR13-08 1/2’’ 12.7 25.5 4 517 51700 2070 207000 200
IH-RR13-12 3/4’’ 19 31.9 4 345 34500 1380 138000 241

1 2 3 4 5 6 7 8 9 10
IH-RR13-16 1’’ 25.4 38.5 4 345 34500 1380 138000 305
IH-RR13-20 1 1/4’’ 31.8 49.6 6 345 34500 1380 138000 419
IH-RR13-24 1 1/2’’ 38.1 57.1 6 345 34500 1380 138000 508
IH-RR13-32 2’’ 50.8 70.9 6 345 34500 1380 138000 635

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 136
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hygienic Food Grade

Edible Oil Hose Low | Med | High

Part No.: IH-EHOH Flexibility

Tube: White (NBR), compounded from material which meets FDA requirements.
Reinforcement: Single wire braid for additional safety from mechanical damage and Cycle Life
kinking. Also aids in heat transfer for prolonged service life. Pressure Rating
Cover: Grey (NBR) Meets FDA requirements.
Size Available: 1/2’’ - 3/4’’ (Larger sizes upon Request) Chemical Resistance
Temperature: -30°C +135°C (177°C Intermittent) Wall Thickness

Construction
Use:
Edible liquids, vegetable oils, salad
dressings, vinegar, mustard and meat
products requiring a sanitary hose which
will not impair taste. Excellent for service
with hot oil fat filters and fryers.

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi mm kg.
IH-EHOH-08 1/2’’ 6 25.9 1723 250 150 0.69
IH-EHOH-10 5/8’’ 15 28.9 1723 250 175 0.76
IH-EHOH-12 3/4’’ 20 32.1 1723 250 200 0.87
1 2 3 4 5 6 7 8 9 10

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
137
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hygienic Food Grade
Milk Tanker - Hard Wall Low | Med | High

Part No.: IH-RMT Flexibility

Tube: White NR
Reinforcement: High textile cords with embedded steel helix wire Cycle Life
Cover: Blue NR/EPDM - abrasion, ozone and oil resistant Pressure Rating
Size Available: 1’’ - 4’’ (Larger sizes upon Request)
Temperature: -40°C +80°C Chemical Resistance
Safety Factor: 3:1 Wall Thickness

Construction
Use:
Liquid food and suction and delivery.
Special construction for maximum flex-
ibility in milk tanker applications. Sterilize
with 5% soda solution.

Standards:
FDA

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Vacuum Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi mm % kg.
IH-RMT-25 1’’ 25 35 1034 150 50 100 0.730
IH-RMT-32 1 1/4’’ 32 42 1034 150 64 100 0.900
IH-RMT-38 1 1/2’’ 38 48 1034 150 76 100 1.040

1 2 3 4 5 6 7 8 9 10
IH-RMT-40 1 9/16’’ 40 50 1034 150 80 100 1.090
IH-RMT-42 1 5/8’’ 42 52 1034 150 88 100 1.100
IH-RMT-45 1 3/4’’ 45 52 1034 150 90 100 1.130
IH-RMT-50 2’’ 51 61 1034 150 100 100 1.420
IH-RMT-65 2 1/2’’ 63 75 1034 150 126 100 2.010
IH-RMT-80 3’’ 76 88 1034 150 228 90 2.590
IH-RMT-100 4’’ 102 116 1034 150 306 90 3.850
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 138
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hygienic Food Grade

Milk Suction & Delivery Hose Feedflex Hose Low | Med | High
Part No.: IH-MILK-B
Flexibility
Tube: White, smooth NBR rubber compound, food quality odourless and taste free
Reinforcement: High strength synthetic plies with steel wire spirals Cycle Life
Cover: Blue, corrugated, cloth impression NBR rubber, resistant to abrasion, ozone
Pressure Rating
and weather
Size Available: 1-1/4” to 6 ’’ (Larger sizes upon Request) Chemical Resistance
Temperature: -40°C +80°C sterilization at 110°C for 30 minutes
Wall Thickness
Safety Factor: 3:1

Construction
Use:
Suction and delivery hose for milk and
fatty foods, very flexible
Standards:
FDA title 21 art.177.2600 (f ) for fatty
foods, BfR, ADI free, PHTHALATE free, D.M.
21/03/73, CE 1935/2004

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Vacuum Weight

Part Number
Inches I.D (mm) O.D (mm) kPa psi mm Bar Kg/m
IH-32-MILK-B 1 1/4” 32 44 1034 150 80 0.9 1.00
IH-38-MILK-B 1 1/2” 38 50 1034 150 125 0.9 1.26
IH-51-MILK-B 2” 51 65 1034 150 150 0.9 1.85
1 2 3 4 5 6 7 8 9 10

IH-63-MILK-B 2 1/2” 63.5 77 1034 150 160 0.9 2.10

IH-756MILK-B 3” 76 92 1034 150 190 0.9 2.90
IH-102-MILK-B 4” 102 118 1034 150 200 0.9 4.10
IH-152-MILK-B 6” 152 172 1034 150 425 0.9 8.30

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
139
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hygienic Food Grade

Liquid Suction Low | Med | High

Part No.: IH-RFS Flexibility

Tube: White NR
Reinforcement: High textile cords with embedded steel helix wire Cycle Life
Cover: Red SBR/EPDM - abrasion and ozone resistant Pressure Rating
Size Available: 1’’ - 4’’ (Larger sizes upon Request)
Temperature: -30°C +80°C Chemical Resistance
Safety Factor: 3:1 Wall Thickness

Construction
Use:
Liquid food and alcoholic beverages
suction and delivery - max 50% proof.
Special construction for maximum
flexibility. Sterilize with 5% soda solution.

Standards:
FDA

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Vacuum Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi mm % kg.
IH-RFS-23 1’’ 23 37 1034 150 75 100 0.910
IH-RFS-38 1 1/2’’ 38 50 1034 150 114 100 1.250
IH-RFS-40 1 9/16’’ 40 52 1034 150 120 100 1.300

1 2 3 4 5 6 7 8 9 10
IH-RFS-51 2’’ 51 63 1034 150 153 100 1.610
IH-RFS-76 3’’ 76 88 1034 150 228 90 2.530
IH-RFS-102 4’’ 102 116 1034 150 306 90 3.510

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 140
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hygienic Food Grade
Beverage Suction & Delivery Feedflex Hose Low | Med | High

Part No.: IH-BEV-R Flexibility

Tube: White, smooth butyl rubber compound, food quality odourless and taste free
Reinforcement: High strength synthetic plies with steel wire spirals Cycle Life
Cover: Red, corrugated, cloth impression EPDM rubber, resistant to abrasion, ozone and Pressure Rating
weather
Size Available: 1-1/4’’ - 4’’ (Larger sizes upon Request) Chemical Resistance
Temperature: -40°C +120°C sterilization at 110°C for 30 minutes Wall Thickness
Safety Factor: 3:1
Construction
Use:
Suction and delivery hose for beer, wine,
alcohol, soft drinks, very flexible

Standards:
FDA title 21 art.177.2600 (e) for liquid
foods, BfR, ADI free, PHTHALATE free, CE
1935/2004

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Vacuum Weight

Part Number
Inches I.D (mm) O.D (mm) kPa psi mm Bar Kg/m
IH-32-BEV-R 1 1/4” 32 44 1241 180 115 0.9 1.04
IH-38-BEV-R 1 1/2” 38 50 1241 180 140 0.9 1.51
IH-51-BEV-R 2” 51 64 1241 180 195 0.9 1.95
1 2 3 4 5 6 7 8 9 10

IH-63-BEV-R 2 1/2” 63.5 80 1241 180 270 0.9 3.10

IH-76-BEV-R 3” 76 94 1241 180 285 0.9 3.60
IH-102-BEV-R 4” 102 120 1241 180 335 0.9 5.10

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
141
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Rubber Hose - Hygienic Food Grade

Milk Tanker - Hard Wall Crush Resistant Low | Med | High

Part No.: IH-RMTC Flexibility

Tube: White NR - abrasion resistant
Reinforcement: High textile cords with antistatic wire Cycle Life
Cover: Black conductive SBR/NR - abrasion and ozone resistant Pressure Rating
Size Available: 3’’ - 4 5/16’’ (Larger sizes upon Request)
Temperature: -30°C +80°C Chemical Resistance
Safety Factor: 3:1 Wall Thickness

Construction
Use:
Bulk food and material delivery.
Specially designed for grain, flour and
plastic pellets transfer.

Standards:
FDA

Specifications

Nominal Dia. Working Pressure Min. Bend Radius Vacuum Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi mm % kg.
IH-RMTC-80 3’’ 75 93 517 75 - - 2.380
IH-RMTC-90 3 1/2’’ 90 102 517 75 - - 2.130
IH-RMTC-100 4’’ 100 120 517 75 - - 3.550

1 2 3 4 5 6 7 8 9 10
IH-RMTC-102 4’’ 102 118 517 75 - - 2.760
IH-RMTC-100 4’’ 102 120 517 75 - - 3.180
IH-RMTC-110 4 5/16’’ 110 122 517 75 - - 2.550

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 142
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose Design
Introduction
Composite hoses are made from quality materials. The inner films and fabrics provide optimum chemical resistance. Protected
with the PVC impregnated outer covers, composite hoses provide the strength and versatility for all petrol and chemical
applications.
Outer Wire

Hose Lining
Scroll Tail or Fitting

Inner Wire
Sealing Films

Inner Wire

Cover

Reinforcements

Composite Hoses are designed to meet the most demanding transfer applications such as:
- Hydrocarbon
- Chemical
- Cryogenic
1 2 3 4 5 6 7 8 9 10

Composite hoses are reinforced offering strength, light weight, flexibility and versatility for variations in pressure,
temperature and product conveyance compatibility. Composite Hose meets various Australian & International Standards and
is available in sizes from 25mm – 250mm.

Application
Transfer for road and rail tanker loading and discharging, storage tank and in-plant use
Conveyants – petrol, diesel, kerosene, black oils, tallow and heavy lubricating products
Ship-to-shore and ship-to-ship transfers, dock side and general shipboard use.

Rope Lagging
All hoses can be supplied with rope lagging. It is necessary to specify at time of ordering. Polypropylene rope is used as lag-
ging. Lagging insulates and protects the hose from abrasion and heat transfer.

Nominal Dia. Rope Diameter Weight

mm inches mm Kg/M
25 1 8 0.48
RUBBER & COMPOSITE HOSE

32 1 1/4 8 0.65
39 1 1/2 8 0.70
51 2 8 0.80
63 2 1/2 10 1.25
76 3 10 1.50
102 4 10 2.00
152 6 12 2.90

__ _________________________________________________________________________________________________________________
143
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose Design

Hose Assemblies
Due to the often hazardous conveyance used it is recommended that composite hose should only be used with properly
fixed fittings. Composite hoses are normally fitted by the wire whipped method or by external crimp. All hoses have a 6 to
1 safety factor.

Testing
All hose assemblies must be pressure tested hydrostatically to one and a half times the maximum recommended working
pressure and electrically tested to confirm continuity per:
- AS2683, AS2594, AS1180, AS2117
- BSEN13765:2010, BS5842:1980
- EN13766:2010, EN ISO 8031:2009, EN ISO 1402

Fittings
A wide range of fittings can be supplied such as Camlocks, Screwed fittings, flanges etc.
Material fittings - Stainless Steel, Aluminum, Custom.

Composite Hose Handling Guide

INCORRECT CORRECT

Pressure Loss Flow Chart 1 2 3 4 5 6 7 8 9 10

RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 144
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Fittings for Composite Hose (Swagged or Wire Whipped)

QL2
Female Camlock

QL1
Male Camlock

AF1
Fixed Male
1 2 3 4 5 6 7 8 9 10

AF2
Swivel Female

AF3
Fixed Flange
RUBBER & COMPOSITE HOSE

AF4
Floating Flange

__ _________________________________________________________________________________________________________________
145
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Petroleum

Composite Hose - Code 1000 Low | Med | High

Part No.: CH-1000 Flexibility

Colour: Green / Yellow Stripe Type: 1
Inner Wire: Galvanised Steel Grade: 3 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: 1 Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ - 6’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
A robust but light weight hose designed
for ease of use as a road tanker delivery
hose for petrol, diesel and low viscosity
oils.

Standards:
AS2683
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-1000-25 1’’ 25 32 700 101 2800 406 60 0.8
CH-1000-32 1 1/4 32 38 700 101 2800 406 75 1.0

1 2 3 4 5 6 7 8 9 10
CH-1000-40 1 1/2’’ 39 48 700 101 2800 406 75 1.3
CH-1000-50 2’’ 51 63 700 101 2800 406 90 1.6
CH-1000-65 2 1/2’’ 63 75 700 101 2800 406 100 2.4
CH-1000-75 3’’ 76 90 700 101 2800 406 125 2.8
CH-1000-100 4’’ 102 112 700 101 2800 406 200 4.1
CH-1000-150 6’’ 152 170 700 101 2800 406 400 7.8

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 146
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Petroleum
Composite Hose - Code 1003 Low | Med | High

Part No.: CH-1003 Flexibility

Colour: Yellow / Green Stripe Type: 1
Inner Wire: Aluminium Grade: 3 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: 1 Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 2’’ - 4’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
Its principal use is for gravity and low
pressure delivery of petrol and diesel to
forecourts from road tankers. Light weight
makes operating and handling easy.

Standards:
AS2683
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-1003-50 2’’ 51 63 400 58 1600 232 90 1.25
CH-1003-65 2 1/2’’ 63 75 400 58 1600 232 100 1.75
1 2 3 4 5 6 7 8 9 10

CH-1003-75 3’’ 76 90 400 58 1600 232 125 2.0

CH-1003-100 4’’ 102 112 400 58 1600 232 200 2.5

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
147
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Petroleum
Composite Hose - Code 901 Low | Med | High

Part No.: CH-901 Flexibility

Colour: Black Type: 2
Inner Wire: Galvanised Steel Grade: 2 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: A - Continuous Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ - 6’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
A tough, high strength oil and petroleum transfer hose. Applications
such as rail car loading and unloading, road tanker bottom loading,
lubricating oil plant hose exchanges. The hose is lined and reinforced
with polypropylene fabrics and sealed with polypropylene films. The
cover is a wear and weatherproof layer of PVC coated polyester.

Applicable Standards
AS2117, BS5842:1980, EN13765, AS2683
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-901-25 1’’ 25 35 1000 145 4000 580 100 0.9

1 2 3 4 5 6 7 8 9 10
CH-901-32 1 1/4 32 42 1000 145 4000 580 125 1.3
CH-901-40 1 1/2’’ 39 50 1000 145 4000 580 140 1.5
CH-901-50 2’’ 51 65 1000 145 4000 580 170 1.9
CH-901-65 2 1/2’’ 63 76 1000 145 4000 580 200 3.0
CH-901-75 3’’ 76 90 1000 145 4000 580 270 3.4
CH-901-100 4’’ 102 120 1000 145 4000 580 340 6.5
CH-901-150 6’’ 152 180 1000 145 4000 580 700 12.4

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 148
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Vapour Recovery

Composite Hose - Code 400 Vapour Low | Med | High

Part No.: CH-400 Flexibility

Colour: Standard Black / Yellow Stripe Type: 1
Inner Wire: Galvanised Steel Grade: 3 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: 1 Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 4’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
Built for vapour return of hydrocarbon products in marine, road
and rail tanker operations. Suitable for the collection or transfer
of hydrocarbon vapors within the oil industry. Vapour hoses are
robust, but light weight and extremely flexible.

Applicable Standards
AS2683, BSEN13765: Type 1
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-400-100 4’ 102 112 400 58 1600 232 200 4.1
1 2 3 4 5 6 7 8 9 10

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___ ________________________________________________________________________________________________________________
149
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical
Composite Hose - Code 951 Low | Med | High

Part No.: CH-951 Flexibility

Colour: Standard Grey / Red Stripe Type: 2/3
Inner Wire: Polypropylene Coated Steel Grade: 2 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: B - Discontinuous Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ - 4’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
Manufactured from multiple layers of polypropylene fabrics
and films. Some typical applications are in plant transfer of
liquid chemicals, vegetable and mineral oils and loading and
unloading of these products to and from road tankers, rail
tankers and marine tanker ships.

Applicable Standards
AS2117, BSEN13765: Type 3, BS5842:1980, AS2594
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-951-25 1’’ 25 38 1000 145 4000 580 100 0.9

1 2 3 4 5 6 7 8 9 10
CH-951-32 1 1/4 32 45 1000 145 4000 580 125 1.3
CH-951-40 1 1/2’’ 39 50 1000 145 4000 580 140 1.5
CH-951-50 2’’ 51 65 1000 145 4000 580 170 1.8
CH-951-63 2 1/2’’ 63 78 1000 145 4000 580 200 2.7
CH-951-75 3’’ 76 92 1000 145 4000 580 270 3.3
CH-951-100 4’’ 102 120 1000 145 4000 580 340 6.3

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 150
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical

Composite Hose - Code 952 Low | Med | High

Part No.: CH-952 Flexibility

Colour: Standard Grey / Blue Stripe Type: 2/3
Inner Wire: Polypropylene Coated Steel Grade: 2 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: B - Discontinuous Pressure Rating
Outer Wire: Stainless Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ -4’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
This hose is identical in its construction to CODE 951 with the
exception of having an outer wire of stainless steel. Like CODE
951, CODE 952 is typically used in applications involving plant
transfer of liquid chemicals, vegetable and mineral oils and load-
ing and unloading of these products to and from, road
tankers, rail tankers and marine tanker ships.
Applicable Standards
AS2117, BSEN13765: Type 3, BS5842:1980, AS2594
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-952-25 1’’ 25 38 1000 145 4000 580 100 0.9
1 2 3 4 5 6 7 8 9 10

CH-952-32 1 1/4 32 45 1000 145 4000 580 125 1.3

CH-952-40 1 1/2’’ 39 50 1000 145 4000 580 140 1.5
CH-952-50 2’’ 51 65 1000 145 4000 580 170 1.8
CH-952-65 2 1/2’’ 63 78 1000 145 4000 580 200 2.7
CH-952-75 3’’ 76 92 1000 145 4000 580 270 3.3
CH-952-100 4’’ 102 120 1000 145 4000 580 340 6.3

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
151
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical

Composite Hose - Code 969 Low | Med | High

Part No.: CH-969 Flexibility

Colour: Orange / Blue Stripe Type: 2/3
Inner Wire: Stainless Steel Grade: 2 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: A - Continuous Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ - 6’’ (Larger sizes upon Request) Wall Thickness
Temperature: -20°C +80°C

Construction
Use:
Manufactured from multiple layers of polypropylene fabrics and
films. The inner wire helix is stainless steel 316. The outer wire helix
is galvanised steel. Again, CODE 969 is typically used in applications
involving plant transfer of liquid chemicals, vegetable and mineral
oils and loading and unloading of these products to and from, road
tankers, rail tankers and marine tanker ships.
Applicable Standards
AS2117, BSEN13765: Type 3, BS5842:1980, AS2594
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-969-25 1’’ 25 38 1000 145 4000 580 100 0.9

1 2 3 4 5 6 7 8 9 10
CH-969-32 1 1/4 32 45 1000 145 4000 580 125 1.3
CH-969-40 1 1/2’’ 39 50 1000 145 4000 580 140 1.5
CH-969-50 2’’ 51 65 1000 145 4000 580 170 1.9
CH-969-65 2 1/2’’ 63 78 1000 145 4000 580 200 3
CH-969-75 3’’ 76 92 1000 145 4000 580 270 3.4
CH-969-100 4’’ 102 120 1000 145 4000 580 340 6.5
CH-969-150 6’’ 152 180 1000 145 4000 580 700 12.4

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 152
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical

Composite Hose - Code 969ASS Low | Med | High

Part No.: CH-969ASS Flexibility

Colour: Orange / Blue Stripe Type: 2/3
Inner Wire: Stainless Steel Grade: 2 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: A - Continuous Pressure Rating
Outer Wire: Stainless Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ -4’’ (Larger sizes upon Request) Wall Thickness
Temperature: -20°C +80°C

Construction
Use:
This hose is identical in its construction to CODE 969 with the
exception of having an outer wire of stainless steel 316. Like CODE
969, CODE 969ASS is typically used in applications involving plant
transfer of liquid chemicals, vegetable and mineral oils and loading
and unloading of these products to and from, road tankers, rail
tankers and marine tanker ships.
Applicable Standards
AS2117, BSEN13765: Type 3, BS5842:1980, AS2594
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-969ASS-25 1’’ 25 38 1000 145 4000 580 100 0.9
CH-969ASS-40 1 1/2’’ 39 50 1000 145 4000 580 140 1.5
1 2 3 4 5 6 7 8 9 10

CH-969ASS-50 2’’ 51 65 1000 145 4000 580 170 1.8

CH-969ASS-65 2 1/2’’ 63 78 1000 145 4000 580 200 2.7
CH-969ASS-75 3’’ 76 92 1000 145 4000 580 270 3.3
CH-969ASS-100 4’’ 100 120 1000 145 4000 580 340 6.3
CH-969ASS-150 6’’ 152 180 1000 145 4000 580 700 12.2

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

RUBBER & COMPOSITE HOSE

Applications

153 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical

Composite Hose - 900HD PTFE Low | Med | High

Part No.: CH-PTFE900 Flexibility

Colour: Purple / Yellow Stripe Cycle Life
Inner Wire: PVDF Coated Stainless Steel
Lining: White PVDF high wall thickness Pressure Rating
Cover: FEP seamless tubular extruded film Chemical Resistance
Reinforcement: Polyester Fabrics
Outer Wire: Stainless Steel Wall Thickness
Crimping: Swagged or Wire Whipped
Size Available: 3/4’’ - 12’’
Temperature: -40°C +125°C
Construction
Use:
Designed for very aggressive chemicals. It is used in such
applications as transfer of all the Chlorine derivates, Hydrochloric
acid, Nitric and Sulphuric acid. Heavy Duty construction, can be
used in general for the most arduous Industrial and Marine
applications.

Applicable Standards
EN 13765:2010 TYPE 3, EN ISO 1746
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
CH-PTFE900HD-20 3/4’’ 20 2000 300 10000 1500 75 0.63

1 2 3 4 5 6 7 8 9 10
CH-PTFE900HD-25 1’’ 25 2000 300 10000 1500 100 0.77
CH-PTFE900HD-32 1 1/4’’ 32 2000 300 10000 1500 125 1.05
CH-PTFE900HD-40 1 1/2’’ 40 2000 300 10000 1500 140 1.33
CH-PTFE900HD-50 2’’ 50 2000 300 10000 1500 180 2.04
CH-PTFE900HD-65 2 1/2’’ 65 2000 300 10000 1500 220 2.75
CH-PTFE900HD-80 3’’ 75 2000 300 10000 1500 180 3.15
CH-PTFE900HD-100 4’’ 100 2000 300 10000 1500 400 4.74
CH-PTFE900HD-150 6’’ 150 2000 300 10000 1500 574 10.00
CH-PTFE900HD-200 8’’ 200 2000 300 10000 1500 800 12.85
CH-PTFE900HD-250 10’’ 250 2000 300 10000 1500 1000 20.85
CH-PTFE900HD-300 12’’ 300 2000 300 10000 1500 1200 31.69

Safety Factor: 5:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 154
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical

Composite Hose - 300SD PTFE Low | Med | High

Part No.: CH-PTFE300SD
Colour: Red / Yellow Stripe Flexibility
Inner Wire: 316 Stainless Steel Cycle Life
Lining: ECTFE films
Cover: Polivinyl coated polyester fabric cover Pressure Rating
Reinforcement: Polyethylene films Chemical Resistance
Outer Wire: 316 Stainless Steel
Crimping: Swagged or Wire Whipped Wall Thickness
Size Available: 1 1/2’’ - 8’’
Temperature: -40°C +125°C

Construction
Use:
General purpose Standard Duty hose suitable for the
safe transfer of a wide variety of Chemicals under
suction or pressure where the chemical resistance of
polypropylene is inadequate. Commonly used for
loading and unloading of road and railtankers, storage
tank and in-plant applications.
Applicable Standards
EN 13765:2010, AS2682, AS2117
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
CH-PTFE300SD-40 1 1/2’’ 40 1400 200 7000 1015 140 1.33
1 2 3 4 5 6 7 8 9 10

CH-PTFE300SD-50 2’’ 50 1400 200 7000 1015 180 2.04

CH-PTFE300SD-65 2 1/2’’ 65 1400 200 7000 1015 220 2.75
CH-PTFE300SD-80 3’’ 75 1400 200 7000 1015 180 3.15
CH-PTFE300SD-100 4’’ 100 1400 200 7000 1015 400 4.74
CH-PTFE300SD-150 6’’ 150 1400 200 7000 1015 574 10.00
CH-PTFE300SD-200 8’’ 200 1400 200 7000 1015 800 12.85

Safety Factor: 5:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___ ________________________________________________________________________________________________________________
155
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical
Composite Hose - Code 300HD PTFE Low | Med | High
Part No.: CH-PTFE300HD
Colour: Red / Yellow Stripe Flexibility
Inner Wire: 316 Stainless Steel Cycle Life
Lining: FEP tubular extruded film
Cover: Thermoplastic films Pressure Rating
Reinforcement: Thermoplastic films Chemical Resistance
Outer Wire: 316 Stainless Steel
Crimping: Swagged or Wire Whipped Wall Thickness
Size Available: 3/4’’ - 12’’
Temperature: -40°C +125°C

Construction
Use:
Heavy Duty construction for aggressive chemicals Suction
& Delivery. Used for Ship to Shore and Ship to Ship,
Dock side and in general for the most arduous Industrial
and Marine applications.

Applicable Standards
EN 13765:2010, AS2682, AS2117
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
CH-PTFE300HD-20 3/4’’ 20 1400 200 7000 1015 75 0.63

1 2 3 4 5 6 7 8 9 10
CH-PTFE300HD-25 1’’ 25 1400 200 7000 1015 100 0.77
CH-PTFE300HD-32 1 1/4’’ 32 1400 200 7000 1015 125 1.05
CH-PTFE300HD-40 1 1/2’’ 38 1400 200 7000 1015 140 1.33
CH-PTFE300HD-50 2’’ 50 1400 200 7000 1015 180 2.04
CH-PTFE300HD-65 2 1/2’’ 65 1400 200 7000 1015 220 2.75
CH-PTFE300HD-80 3’’ 80 1400 200 7000 1015 280 3.15
CH-PTFE300HD-100 4’’ 100 1400 200 7000 1015 400 4.74
CH-PTFE300HD-150 6’’ 150 1400 200 7000 1015 550 10.50
CH-PTFE300HD-200 8’’ 200 1400 200 7000 1015 800 12.85
CH-PTFE300HD-250 10’’ 250 1400 200 7000 1015 1000 20.96
CH-PTFE300HD-300 12’’ 300 1400 200 7000 1015 1200 31.69

Safety Factor: 5:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 156
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Chemical

Composite Hose - ECTFE Low | Med | High

Part No.: CH-ECTFE
Colour: Blue / White Stripe Flexibility
Type: 2/3
Inner Wire: 316 Stainless Steel Cycle Life
Grade: 2
Lining: ECTFE
Electrical kind: B - Discontinuous Pressure Rating
Cover: PVC Coated Polyester Cloth
Reinforcement: Polyester Fabrics Chemical Resistance
Outer Wire: 316 Stainless Steel
Crimping: Swagged or Wire Whipped Wall Thickness
Size Available: 4’’ - 10’’
Temperature: -30°C +80°C

Construction
Use:
Designed for suction and discharge of the most aggressive
chemicals and searching solvents and is generally used where the
chemical resistance of polypropylene is inadequate.
This hose is extremely robust and is used predominantly for ship to
shore/ship to ship operations, and for the most demanding of plant
duties. It can be used for the transfer of certain liquid food products.
Applicable Standards
BSEN13765:2010
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
1 2 3 4 5 6 7 8 9 10

CH-ECTFE-100 4’’ 100 1400 200 7000 1000 400 6.4 0.9
CH-ECTFE-150 6’’ 150 1400 200 7000 1000 510 10.7 0.9
CH-ECTFE-200 8’’ 200 1400 200 7000 1000 760 15.0 0.9
CH-ECTFE-250 10’’ 250 1050 150 5250 750 915 20.5 0.9

Safety Factor: 5:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

__ 157
_________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Bitumen

Composite Hose - 966 Hot Bitumen Low | Med | High

Part No.: CH-966 Flexibility

Colour: Standard White Type: 1
Inner Wire: Galvanised Steel Grade: 3 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: 1 Pressure Rating
Outer Wire: Stainless Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 3/4’’ - 3’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +180°C

Construction
Use:
Designed for high temperature operation, this hose is ideal for the
transfer of hot bitumen via gravity, suction or pressure. Suitable for
use with bitumen up to 180˚C. Suited for road tanker loading and
discharge, in plant transfer, spraying and spray bar applications also
suitable for conveying high aromatic content fuels.
- This hose is not recommended for use close to direct external
radiant heat as the cover is not flame retardant.
- Hoses should be flushed with diesel or kerosene after use.
Cleaning with steam or direct external heat is not recommended.

Applicable Standards
AS2117
Specifications

Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number

1 2 3 4 5 6 7 8 9 10
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-966-20 3/4’’ 19 28 700 101 2800 406 125 0.8
CH-966-25 1’’ 25 35 700 101 2800 406 125 0.9
CH-966-32 1 1/4’’ 32 43 700 101 2800 406 130 1.0
CH-966-40 1 1/2’’ 39 50 700 101 2800 406 150 1.5
CH-966-50 2’’ 51 68 600 87 2400 348 200 2.0
CH-966-65 2 1/2’’ 63 78 500 72 2000 290 250 2.8
CH-966-80 3’’ 76 90 500 72 2000 290 280 3.5

Alternative products:
Refer to Bitumen Fittings - Page 243
Refer to Bitumen Stainless Steel Hose - Page 45
Refer to Bitumen Interlocked - Page 46
Refer to Spray Bar specification - Page 37

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 158
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Aviation

Composite Hose - 700 Aviation Low | Med | High

Part No.: CH-AVA Flexibility

Colour: Black / Green Stripe Type: 2
Inner Wire: Stainless Steel Grade: 1 Cycle Life
Reinforcement: Polypropylene Fabric and Films Electrical kind: 1 Pressure Rating
Outer Wire: Black polypropylene coated galvanised
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1 1/2’’ - 4’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
This range of high quality composite hoses is manufactured
from multiple layers of polypropylene fabrics and films. The
inner wire helix is stainless steel 316. AVA SG is the same design
as CODE 969, but has a thinner wall thickness therefore the
working pressure is decreased. AVA SG is designed for use as a
delivery hose of aviation fuel.
Applicable Standards
AS2683
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) O.D (mm) kPa psi kPa psi mm kg.
CH-AVA-40 1 1/2’’ 39 48 700 101 2800 406 75 1.3
1 2 3 4 5 6 7 8 9 10

CH-AVA-50 2’’ 51 63 600 87 2400 348 90 1.6

CH-AVA-80 3’’ 76 90 500 72 2000 290 125 2.8
CH-AVA-100 4’’ 102 112 400 58 1600 232 200 4.1

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___ ________________________________________________________________________________________________________________
159
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Fire Resistant

Composite Hose - FireSafe Low | Med | High

Part No.: CH-FIRESAFE Flexibility

Colour: Red / White Stripe
Inner Wire: Galvanised Steel Cycle Life
Reinforcement: Polypropylene Fabric and Films Pressure Rating
Outer Wire: Galvanised Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ - 4’’ Wall Thickness
(Larger sizes upon Request)

Temperature: -20°C +80°C

Construction
Use:
FIRESAFE composite hose utilizes a series of non asbestos barriers
to conduct and radiate heat to achieve outstanding fire retardant
ability. Rigorous testing by an independent agency has proven
FIRESAFE hose still intact and capable of holding product after
thirty (30) minutes of severe fire attack. The internal versus external
temperature during this test showed an extremely low heat
transfer rate maintaining an internal temperature of below 200
degrees Celsius with an external temperature over 800 degrees
Celsius. Even after loss of integrity, FIRESAFE hose will not fail
catastrophically.
These characteristics coupled with better torque resistance and
abrasion resistance compared to metallic flexible hose, make this a
viable alternative for bottom loading/ drop hoses.

Applicable Standards
BSEN13765:2010

1 2 3 4 5 6 7 8 9 10
Approved and Tested by:
British Government Department of the Environment
British Fire Research Station
Swedish Fire Service
Specifications

Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
CH-FIRESAFE-25 1’’ 25 1400 203 5600 812 100 0.8
CH-FIRESAFE-40 1 1/2’’ 38 1400 203 5600 812 140 1.2
CH-FIRESAFE-50 2’’ 50 1400 203 5600 812 180 1.9
CH-FIRESAFE-75 3’’ 75 1400 203 5600 812 280 2.5
CH-FIRESAFE-100 4’’ 100 1400 203 5600 812 395 5.2

Safety Factor: 4:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 160
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Cryogenic

Composite Hose - Cryogenic Low | Med | High

Part No.: CRY Flexibility

Colour: Standard White
Inner Wire: 316 Stainless Steel Cycle Life
Reinforcement: Polyamide Polyester Pressure Rating
Outer Wire: 316 Stainless Steel
Crimping: Swagged or Wire Whipped Chemical Resistance
Size Available: 1’’ - 10’’ Wall Thickness
Temperature: -200°C +80°C

Construction
Use:
With excellent resistance to the low temperatures required for
transfer of liquid gases such as Liquefied Petroleum Gas (LPG),
Liquefied Natural Gas (LNG), carbon dioxide, ammonia or ethylene.
While specifically designed for cryogenic fluids, the hose is also
suitable for use with a wide range of hazardous chemicals.

Applicable Standards
EN13766:2010 Exceeds Class A
IMO IGC code
AS/NZ 1869
BSEN13766:2010
Specifications
1 2 3 4 5 6 7 8 9 10

Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
CH-CRY-25 1’’ 25 2500 360 12500 1812 100 1.0
CH-CRY-40 1 1/2’’ 38 2500 360 12500 1812 140 1.5
CH-CRY-50 2’’ 50 2500 360 12500 1812 180 2.5
CH-CRY-65 2 1/2’’ 65 2500 360 12500 1812 205 3.3
CH-CRY-80 3’’ 75 2500 360 12500 1812 280 4.5
CH-CRY-100 4’’ 100 2500 360 12500 1812 395 7.5
CH-CRY-150 6’’ 150 2500 360 12500 1812 510 13.5
CH-CRY-200 8’’ 200 2040 295 10200 1450 760 18.5
CH-CRY-250 10’’ 250 1500 217 7500 1090 915 25

Safety Factor 5:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

__ _________________________________________________________________________________________________________________
161
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Cryogenic

Composite Hose - LPG Low | Med | High

Part No.: LPG
Colour: White / Yellow Stripe Flexibility
Inner Wire: 316 Stainless Steel Cycle Life
Lining: Polypropilene films
Cover: Polyester Fabrics Pressure Rating
Reinforcement: Polyester Fabrics Chemical Resistance
Outer Wire: 316 Stainless Steel
Crimping: Swagged or Wire Whipped Wall Thickness
Size Available: 3/4’’ - 12’’
Temperature: -105°C +100°C

Construction
Use:
Suitable for transferring fully refrigerated conveyants such
as LPG, Propane and Buthane down to -105°C, as well as liquid
Ethane at and liquid Ethylene. Suitable for fluids included in
Chap XIX, Gas carrier Code.

Applicable Standards
EN ISO 8031:2009 – 4.7, EN ISO 1402, DNV
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
CH-LPG-20 3/4’’ 20 2500 362 12500 1813 80 0.8

1 2 3 4 5 6 7 8 9 10
CH-LPG-25 1’’ 25 2500 362 12500 1813 100 1.0
CH-LPG-32 1 1/4’’ 32 2500 362 12500 1813 125 1.3
CH-LPG-40 1 1/2’’ 40 2500 362 12500 1813 140 1.5
CH-LPG-50 2’’ 50 2500 362 12500 1813 180 2.5
CH-LPG-65 2 1/2’’ 65 2500 362 12500 1813 200 3.3
CH-LPG-80 3’’ 75 2500 362 12500 1813 260 4.0
CH-LPG-100 4’’ 100 2500 362 12500 1813 350 5.3
CH-LPG-150 6’’ 150 2500 362 12500 1813 500 13.2
CH-LPG-200 8’’ 200 2500 362 12500 1813 750 18.0
CH-LPG-250 10’’ 250 1500 218 7500 1087 900 25.0
CH-LPG-300 12’’ 300 1000 145 5000 725 1500 34.0

Safety Factor: 5:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

___________________________________________________________________________________________________________________ 162
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com
 RUBBER & COMPOSITE HOSE
Composite Hose - Cryogenic

Composite Hose - LNG Low | Med | High

Part No.: IH-LNG Flexibility

Colour: White / Yellow Stripe Cycle Life
Inner Wire: 316 Stainless Steel
Lining: Polypropilene films Pressure Rating
Cover: Polyester Fabrics Chemical Resistance
Reinforcement: Polyester Fabrics
Outer Wire: 316 Stainless Steel Wall Thickness
Crimping: Swagged or Wire Whipped
Size Available: 3/4’’ - 12’’
Temperature: -200°C +80°C

Construction
Use:
Hose is suitable for handling LNG Liquified Natural Gas, Liquid
Methane and liquid Nitrogen at -200°C. Liquified Natural Gas
LNG at extremely low temperatures

Applicable Standards:
EN ISO 8031:2009 – 4.7, EN ISO 1402, DNV
Specifications
Nominal Dia. Max. Working Pressure Max. Burst Pressure Min. Bend Radius Weight Per Mtr
Part Number
Inches I.D (mm) kPa psi kPa psi mm kg.
IH-LNG-20 3/4’’ 20 1380 200 11040 1600 80 0.8
1 2 3 4 5 6 7 8 9 10

IH-LNG-25 1’’ 25 1380 200 11040 1600 100 1.0

IH-LNG-32 1 1/4’’ 32 1380 200 11040 1600 125 1.3
IH-LNG-40 1 1/2’’ 40 1380 200 11040 1600 140 1.5
IH-LNG-50 2’’ 50 1380 200 11040 1600 180 2.5
IH-LNG-65 2 1/2’’ 65 1380 200 11040 1600 200 3.3
IH-LNG-80 3’’ 75 1380 200 11040 1600 260 4.0
IH-LNG-100 4’’ 100 1275 184 10200 1479 350 5.3
IH-LNG-150 6’’ 150 1275 184 10200 1479 500 13.2
IH-LNG-200 8’’ 200 1275 184 10200 1479 750 18.0
IH-LNG-250 10’’ 250 1275 184 10200 1479 900 25.0
IH-LNG-300 12’’ 300 1030 149 8240 1195 1500 34.0

Safety Factor: 8:1 Standard Duty. (Burst Pressure: Working Pressure)

Applications
RUBBER & COMPOSITE HOSE

163 ___________________________________________________________________________________________________________________
QLD Ph: +617 5593 4292 | WA Ph: +618 9468 2840 Email: [email protected] l [email protected] Web: www.hoseflex.com