ASME BPE

TUBES & FITTINGS

316L
AL-6XN
C-22

www.aseptconn.ch
Aseptconn is a leading component supplier for the sterile liquid
technology used in the pharmaceutical and biopharmaceutical
industries. Our innovative products in combination with our years
of pharma experience, and resultant expert guidance, enhance
the productivity and safety of our customers’ manufacturing
processes in a sustainable way.

A benefit of our extensive experience is a stock and certification

management system that guantees short delivery with complete,
correct, and traceable certification documentation for each order.
In addition, our wide range of products allows our customers to
obtain all components from a single source.

Aseptconn Team:
Created in 2016, Aseptconn is made up of a team with many years
of experience in consulting and sales of components for sterile
process technology. We are a customer centric organization
focused on innovation, responsiveness and complete order
satisfaction. These values provide the foundation of our business
conduct.

Aseptconn is ISO 9001: 2015 Certified.

 TABLE OF CONTENTS

01 . ASME BPE PRESENTATION .................................................... 07

Specifications - Materials & Dimensions.................................................. 08
Specifications - Tolerances.......................................................................... 09
Specifications - Surface Finishes................................................................ 10
Specifications.................................................................................................. 11

02 . DT INDEX ......................................................................................................13
DT - 4.1.1 - Elbows & Bends........................................................................ 14
DT - 4.1.2 - Tees & Crosses......................................................................... 15
DT - 4.1.2 - Tees & Crosses......................................................................... 16
DT - 4.1.3 - Reducers - 4.1.4 - Ferrules - 4.1.5 - Caps........................... 17

03 . PRODUCTS BY DT-NUMBERS ............................................. 19

DT-4.1 - Tubes................................................................................................ 20
DT-4.1.4-1 - Tri-Clamps Ferrules................................................................ 21
DT-4.1.1-1 - 90° Elbows................................................................................ 23
DT-4.1.1-4 - 45° Elbows................................................................................ 24
DT-4.1.2-1 - Equal Tees................................................................................. 25
DT-4.1.2-6 - Reducing Tees.......................................................................... 26
DT-4.1.3-1 - Concentric Reducers.............................................................. 28
DT-4.1.3-1 - Eccentric Reducers................................................................. 29
DT-4.1.5-2 - Tri-Clamp Caps........................................................................ 30
DT-4.1.1-2 - 90° Elbows BW x TC............................................................... 31
DT-4.1.1-3 - 90° Elbows TC x TC................................................................. 32
DT-4.1.1-5 - 45° Elbows BW x TC............................................................... 33
DT-4.1.1-6 - 45° Elbows TC x TC................................................................. 34

4 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

04 . C-22 WELD INSERTS.......................................................................... 35
C-22 Weld Inserts........................................................................................... 36

YOUR CONTACT PERSONS................................................................. 38

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 5

ASME BPE
PRESENTATION

www.aseptconn.ch
 ASME BPE
Specifications

The ASME BPE aids in the design and fabrications of equipment used in pharma and biotech
fields, by developing and maintaining a consensus standard with some requirements for
systems and components.

Since 1988, throughout the development and the different editions of this standard, the
chapters of this document define and simplify the specifications of equipment, particularly
for tubes, fittings and valves.

MATERIALS ACCORDING TO PART MM - METALLIC MATERIALS

Grades UNS EN %C % Mn % Cr % Ni % Mo PRE

Austenitic Stainless Steel

304L S30403 1.4307 0.030 2.00 17.50-19.50 8.00-10.50 - 19
316L (*) S31603 1.4404 0.030 2.00 16.50-18.50 10.00-14.50 2.00-2.50 23
316L S31603 1.4435 0.030 2.00 17.50-19.00 12.50-15.00 2.50-3.00 26
Superaustenitic Stainless Steel
904L N08904 1.4539 0.020 2.00 19.00-23.00 23.00-28.00 4.00-5.00 34
254SMO S31254 1.4547 0.020 1.00 19.50-20.50 17.50-18.50 6.00-6.50 42
AL6XN N08367 1.4529 0.020 1.00 19.00-21.00 24.00-26.00 6.00-7.00 43
Nickel Alloys
C276 N10276 2.4819 0.010 1.00 14.50-16.50 57.00 15.0-17.0 45
C22 N06022 2.4602 0.015 0.50 20.00-22.50 56.00 12.50-14.50 46

(*) According to MM-2.1-1, with a defined sulphur content between 0,005 and 0,017 %, to
achieve repeatability for automatic orbital welding process.

Hardness < 90 HRB.

Non-russian origin of the steel products certification according to EU 833/2014 regulation.

DIMENSIONS ACCORDING TO PART DT - DIMENSIONS & TOLERANCES

Nominal Sizes OD (mm) Thickness (mm)

1/4” 6.35 0.89

3/8” 9.53 0.89
1/2” 12.70 1.65
3/4” 19.05 1.65
1” 25.40 1.65
1”1/2 38.10 1.65
2” 50.80 1.65
2”/1/2 63.50 1.65
3” 76.20 1.65
4” 101.60 2.11
6” 152.40 2.77

with reference to table DT-4-1.

8 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

ASME BPE
Specifications

TOLERANCES

All these tolerances are defined in chapter DT-7 with reference to tables DT-3-1, DT-3-2
& DT-7.1-1 for fittings, and ASTM A269 & A270-S2 for tubes.

TOLERANCES FOR FITTINGS

Nominal OD (mm) W.T.MP W.T. EP Squareness Off Angle Equiv. Off Plane Centerline
Size (mm) (mm) (mm) Angle (mm) Radius
(mm) (mm)

1/4” +/- 0.13 +0.08/-0.10 +0.08/-0.15 0.13 0.23 2.1° 0.76 14.30
3/8” +/- 0.13 +0.08/-0.10 +0.08/-0.15 0.13 0.30 1.8° 0.76 28.58
1/2” +/- 0.13 +0.13/-0.20 +0.13/-0.25 0.13 0.36 1.6° 0.76 28.58
3/4” +/- 0.13 +0.13/-0.20 +0.13/-0.25 0.13 0.46 1.4° 0.76 28.58
1” +/- 0.13 +0.13/-0.20 +0.13/-0.25 0.13 0.64 1.4° 0.76 38.10
1” 1/2” +/- 0.20 +0.13/-0.20 +0.13/-0.25 0.20 0.86 1.3° 1.27 57.15
2” +/- 0.20 +0.13/-0.20 +0.13/-0.25 0.20 1.09 1.2° 1.27 76.20
2”1/2 +/- 0.25 +0.13/-0.20 +0.13/-0.25 0.25 1.37 1.2° 1.27 95.25
3” +/- 0.25 +0.13/-0.20 +0.13/-0.25 0.41 1.73 1.3° 1.27 114.30
4” +/- 0.38 +0.20/-0.25 +0.20/-0.30 0.41 2.18 1.2° 1.52 152.40
6” +/- 0.76 +0.38/-0.38 +0.38/-0.43 0.76 3.43 1.3° 1.52 228.60

TOLERANCES FOR TUBES

Nominal Size Outside Diameter (mm) Wall Thickness (mm) Cut Lenght (mm)

1/4” - 3/8” +/- 0.13 +/- 0.15 % 3.20

1/2” TO 1” +/- 0.13 +/- 0.10 % 3.20
1” 1/2 TO 3” +/- 0.25 +/- 0.10 % 4.80
4” +/- 0.38 +/- 0.10 % 4.80
6” +/- 0.76 +/- 0.10 % 4.80

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 9

 ASME BPE
Specifications

SURFACES FINISHES

Process contact surfaces shall be finished using mechanical or electropolishing, in

reference to the following table SF-2.4.1-1 defining Ra max:

SURFACES FINISHES ACCORDING TO PART SF - SURFACE FINISHES FOR MULTI-USE

Mechanically Polished Electropolished

Surface Designation µin µm Surface Designation µin µm

SF1 20 0.51 SF4 15 0.38

SF2 25 O.64 SF5 20 0.51
SF3 30 O.76 SF6 25 0.64

Ra reading must be in accordance with ASME B46.1.

A multiple step cycle process is conducted to ensure surfaces quality with consistent
repeatability:

• Degreasing
• Pickling
• Passivation
• De-ionized water cleaning

INSPECTION PROCEDURES

• Raw material validation

• 100% PMI checking
• 100% Visual inspection
• Endoscopic inspection (not applicable for EP products)
• Dimensions & Tolerances control
• Roughness measurement

MARKING

Each process components is permanently laser marked to maintain traceability:

• ASEPTCONN AG & manufacturer logo

• ASME mark with BPE designator
• Material type
• Dimension
• Process contacts surface designation SF
• Heat number

10 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

ASME BPE
Specifications

PACKAGING & LABELLING

Weld ends prepared for orbital welding

Each process components is individually delivered with PE caps, sealed in PE foil and with
a label in compliance with the following policy:

• Aseptconn logo
• ASME BPE stamp
• Product description
• Standard reference DT-X.X.X-X
• Material type
• Dimension
• Process contacts surface designation SF
• Heat number
• Aseptconn code

DELIVERY

• Cardboard box for fittings

• Wooden crates or tubular containers for tubes

DOCUMENTATION

Full material test and inspection reports according to DIN EN 10204-3.1 are supplied with
the finished products and available in digital format.

All the references to ASME BPE standard are linked with and referred to the 2022 revision , issued the 29th of April 2022.

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 11

ASME BPE
DT INDEX

www.aseptconn.ch
 ASME BPE
DT Index

DT- 4.1.1 – ELBOWS & BENDS

DT-4.1.1-1 ( ex DT-7 ) DT-4.1.1-2 ( ex DT-12 ) DT-4.1.1-3 ( ex DT-16 )

90° Elbow - Ends BW x BW 90° Elbow - Ends BW x TC 90° Elbow - Ends TC x TC

DT-4.1.1-4 ( ex DT-8 ) DT-4.1.1-5 ( ex DT-13 ) DT-4.1.1-6 ( ex DT-17 )

45° Elbow - Ends BW x BW 45° Elbow - Ends BW x TC 45° Elbow - Ends TC x TC

DT-4.1.1-7 ( ex DT-23 ) DT-4.1.1-8 ( ex DT-24 )

180° Return Bend - Ends 180° Return Bend - Ends

BW x BW TC x TC

DT-4.1.1-9 DT-4.1.1-10

88° Elbow - Ends BW x BW 92° Elbow - Ends BW x BW

14 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

ASME BPE
DT Index

DT- 4.1.2 – TEES & CROSSES

DT-4.1.2-1 ( ex DT-9 ) DT-4.1.2-2 ( ex DT-15 ) DT-4.1.2-3 ( ex DT-25 )

Straight Equal Tee / Cross - Short Outlet Tee - Ends Short Outlet Run Tee - Ends
Ends BW BW/TC BW/TC

DT-4.1.2-4 ( ex DT-18 ) DT-4.1.2-5 ( ex DT-27 )

Straight Equal Tee / Cross -

Ends TC Short Outlet Tee - Ends TC

DT-4.1.2-6 ( ex DT-10 )

Reducing Tee - Ends BW

DT-4.1.2-7 ( ex DT-14 )

Short Outlet Reducing Tee -

Ends BW/TC

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 15

 ASME BPE
DT Index

DT- 4.1.2 – TEES & CROSSES

DT-4.1.2-8 ( ex DT-19 ) DT-4.1.2-9 ( ex DT-20 )

Short Outlet Reducing Tee -

Reducing Tee - Ends TC Ends TC

DT-4.1.2-10 ( ex DT-28 ) DT-4.1.2-11 ( ex DT-29 )

Instrument Tee - Ends BW/TC Instrument Tee - Ends TC

DT-4.1.2-12

Standard Outlet Tee - Ends

BW/TC

DT-4.1.2-13

Standard Outlet Reducing

Tee - Ends BW/TC

16 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

ASME BPE
DT Index

DT- 4.1.3 – REDUCERS

DT-4.1.3-1 ( ex DT-11 ) DT-4.1.3-2 ( ex DT-26 ) DT-4.1.3-3 ( ex DT-21 )

Short Concentric / Eccentric Short Concentric / Eccentric Short Concentric / Eccentric

Reducer Ends BW x BW Reducer Ends BW x TC Reducer Ends TC x TC

DT - 4.1.4 - FERRULES

DT-4.1.4-1 ( ex DT-22 )

Ferrule A/Long - B/Medium

C/Short - Ends BW x TC

DT - 4.1.5 - CAPS

DT-4.1.5-1 ( ex DT-30 ) DT-4.1.5-2 ( ex DT-31 )

Weld Cap - Ends BW Solid End Cap - Ends BW

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 17

ASME BPE
DT NUMBERS
 Welding Accessories
DT-4.1 TUBES

TECHNICAL SPECIFICATIONS TUBES DT-4.1

Nominal Size AD ID S Part Numbers

(mm) (mm) (mm)

1/4” 6.35 4.57 0.89 130.A-025.WEL.XX.XXX

3/8” 9.53 7.75 0.89 130.A-0375.WEL.XX.XXX
1/2” 12.70 9.40 1.65 130.A-050.WEL.XX.XXX
3/4” 19.05 15.75 1.65 130.A-075.WEL.XX.XXX
1” 25.40 22.10 1.65 130.A-100.WEL.XX.XXX
1”1/2 38.10 34.80 1.65 130.A-150.WEL.XX.XXX
2” 50.80 47.50 1.65 130.A-200.WEL.XX.XXX
2”1/2 63.50 60.20 1.65 130.A-250.WEL.XX.XXX
3” 76.20 72.90 1.65 130.A-300.WEL.XX.XXX
4” 101.60 97.38 2.11 130.A-400.WEL.XX.XXX
6” 152.40 146.86 2.77 130.A-600.WEL.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

20 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

Tri-Clamp Connections
DT-4.1.4-1 (ex DT-22) TRI-CLAMP FERRULES

TECHNICAL SPECIFICATIONS TRI-CLAMPS DT-4.1.4-1 - B SERIES (STANDARD VERSION)

Nominal Size AD ID A L Part Numbers
(mm) (mm) (mm) (mm)

1/4” 6.35 4.57 25.00 28.58 102.A-025.025.XXX

3/8” 9.53 7.75 25.00 28.58 102.A-038.025.XXX
1/2” 12.70 9.40 25.00 28.58 102.A-050-025.XXX
3/4” 19.05 15.75 25.00 28.58 102.A-075-025.XXX
1” 25.40 22.10 50.50 28.58 102.A-100-050.XXX
1”1/2 38.10 34.80 50.50 28.58 102.A-150.050.XXX
2” 50.80 47.50 64.00 28.58 102.A-200.064.XXX
2”1/2 63.50 60.20 77.50 28.58 102.A-250.077.XXX
3” 76.20 72.90 91.00 28.58 102.A-300.091.XXX
4” 101.60 97.38 119.00 28.58 102.A-400.119.XXX
6” 152.40 146.86 167.00 38.10 102.A-600.167.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 21

 Tri-Clamp Connections
DT-4.1.4-1 (ex DT-22) TRI-CLAMP FERRULES

TECHNICAL SPECIFICATIONS TRI-CLAMPS DT-4.1.4-1 - C SERIES (SHORT VERSION)

Nominal Size AD ID A L Part Numbers
(mm) (mm) (mm) (mm)

1/4” 6.35 4.57 25.00 12.70 102S.A-025.025.XXX

3/8” 9.53 7.75 25.00 12.70 102S.A-038.025.XXX
1/2” 12.70 9.40 25.00 12.70 102S.A-050-025.XXX
3/4” 19.05 15.75 25.00 12.70 102S.A-075-025.XXX
1” 25.40 22.10 50.50 12.70 102S.A-100-050.XXX
1”1/2 38.10 34.80 50.50 12.70 102S.A-150.050.XXX
2” 50.80 47.50 64.00 12.70 102S.A-200.064.XXX
2”1/2 63.50 60.20 77.50 12.70 102S.A-250.077.XXX
3” 76.20 72.90 91.00 12.70 102S.A-300.091.XXX
4” 101.60 97.38 119.00 15.88 102S.A-400.119.XXX
6” 152.40 146.86 167.00 19.05 102S.A-600.167.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

TECHNICAL SPECIFICATIONS TRI-CLAMPS DT-4.1.4-1 - A SERIES (LONG VERSION)

Nominal Size AD ID A L Part Numbers
(mm) (mm) (mm) (mm)

1/4” 6.35 4.57 25.00 44.45 102L.A-025.025.XXX

3/8” 9.53 7.75 25.00 44.45 102L.A-038.025.XXX
1/2” 12.70 9.40 25.00 44.45 102L.A-050-025.XXX
3/4” 19.05 15.75 25.00 44.45 102L.A-075-025.XXX
1” 25.40 22.10 50.50 44.45 102L.A-100-050.XXX
1”1/2 38.10 34.80 50.50 44.45 102L.A-150.050.XXX
2” 50.80 47.50 64.00 57.15 102L.A-200.064.XXX
2”1/2 63.50 60.20 77.50 57.15 102L.A-250.077.XXX
3” 76.20 72.90 91.00 57.15 102L.A-300.091.XXX
4” 101.60 97.38 119.00 57.15 102L.A-400.119.XXX
6” 152.40 146.86 167.00 76.20 102L.A-600.167.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

22 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

Welding Accessories
DT-4.1.1-1 (ex DT-7) 90° ELBOWS

TECHNICAL SPECIFICATIONS 90° ELBOWS DT-4.1.1-1

Nominal Size AD ID L Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 66.68 116.090.A-025.WEL.XX.XXX

3/8” 9.53 7.75 66.68 116.090.A-0375.WEL.XX.XXX
1/2” 12.70 9.40 76.20 116.090.A-050.WEL.XX.XXX
3/4” 19.05 15.75 76.20 116.090.A-075.WEL.XX.XXX
1” 25.40 22.10 76.20 116.090.A-100.WEL.XX.XXX
1”1/2 38.10 34.80 95.25 116.090.A-150.WEL.XX.XXX
2” 50.80 47.50 120.65 116.090.A-200.WEL.XX.XXX
2”1/2 63.50 60.20 139.70 116.090.A-250.WEL.XX.XXX
3” 76.20 72.90 158.75 116.090.A-300.WEL.XX.XXX
4” 101.60 97.38 203.20 116.090.A-400.WEL.XX.XXX
6” 152.40 146.86 292.10 116.090.A-600.WEL.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 23

 Welding Accessories
DT-4.1.1-4 (ex DT-8) 45° ELBOWS

TECHNICAL SPECIFICATIONS 45° ELBOWS DT-4.1.1-4

Nominal Size AD ID L Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 50.80 116.045.A-025.WEL.XX.XXX

3/8” 9.53 7.75 50.80 116.045.A-0375.WEL.XX.XXX
1/2” 12.70 9.40 57.15 116.045.A-050.WEL.XX.XXX
3/4” 19.05 15.75 57.15 116.045.A-075.WEL.XX.XXX
1” 25.40 22.10 57.15 116.045.A-100.WEL.XX.XXX
1”1/2 38.10 34.80 63.50 116.045.A-150.WEL.XX.XXX
2” 50.80 47.50 76.20 116.045.A-200.WEL.XX.XXX
2”1/2 63.50 60.20 85.73 116.045.A-250.WEL.XX.XXX
3” 76.20 72.90 92.08 116.045.A-300.WEL.XX.XXX
4” 101.60 97.38 114.30 116.045.A-400.WEL.XX.XXX
6” 152.40 146.86 158.75 116.045.A-600.WEL.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

24 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

Welding Accessories
DT-4.1.2-1 (ex DT-9) EQUAL TEES

TECHNICAL SPECIFICATIONS EQUAL TEES DT-4.1.2-1

Nominal Size AD ID L/2 Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 44.45 115.E.A-025.WEL.XX.XXX

3/8” 9.53 7.75 44.45 115.E.A-0375.WEL.XX.XXX
1/2” 12.70 9.40 47.63 115.E.A-050.WEL.XX.XXX
3/4” 19.05 15.75 50.80 115.E.A-075.WEL.XX.XXX
1” 25.40 22.10 53.98 115.E.A-100.WEL.XX.XXX
1”1/2 38.10 34.80 60.33 115.E.A-150.WEL.XX.XXX
2” 50.80 47.50 73.03 115.E.A-200.WEL.XX.XXX
2”1/2 63.50 60.20 79.38 115.E.A-250.WEL.XX.XXX
3” 76.20 72.90 85.73 115.E.A-300.WEL.XX.XXX
4” 101.60 97.38 104.78 115.E.A-400.WEL.XX.XXX
6” 152.40 146.86 142.88 115.E.A-600.WEL.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 25

 Welding Accessories
DT-4.1.2-6 (ex DT-10) REDUCING TEES

TECHNICAL SPECIFICATIONS REDUCING TEES DT-4.1.2-6

Dimensions D d L/2 l Part Numbers
(mm) (mm) (mm) (mm)

3/8” x 1/4” 9.53 6.35 44.45 44.45 115.R.A-0375.A-025.WEL.XX.XXX

1/2” x 1/4” 12.70 6.35 47.63 47.63 115.R.A-050.A-025.WEL.XX.XXX
1/2” x 3/8” 12.70 9.53 47.63 47.63 115.R.A-050.A-0375.WEL.XX.XXX
3/4” x 1/4” 19.05 6.35 50.80 50.80 115.R.A-075.A-025.WEL.XX.XXX
3/4” x 3/8” 19.05 9.53 50.80 50.80 115.R.A-075.A-0375.WEL.XX.XXX
3/4” x 1/2” 19.05 12.70 50.80 50.80 115.R.A-075.A-050.WEL.XX.XXX
1” x 1/4” 25.40 6.35 53.98 53.98 115.R.A-100.A-025.WEL.XX.XXX
1” x 3/8” 25.40 9.53 53.98 53.98 115.R.A-100.A-0375.WEL.XX.XXX
1” x 1/2” 25.40 12.70 53.98 53.98 115.R.A-100.A-050.WEL.XX.XXX
1” x 3/4” 25.40 19.05 53.98 53.98 115.R.A-100.A-075.WEL.XX.XXX
1”1/2” x 1/2” 38.10 12.70 60.33 60.33 115.R.A-150.A-050.WEL.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

26 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

Welding Accessories
DT-4.1.2-6 (ex DT-10) REDUCING TEES

Dimensions D d L/2 l Part Numbers

(mm) (mm) (mm) (mm)

1”1/2 x 3/4” 38.10 19.05 60.33 60.33 115.R.A-150.A-075.WEL.XX.XXX

1”1/2 x 1” 38.10 25.40 60.33 60.33 115.R.A-150.A-100.WEL.XX.XXX
2” x 1/2” 50.80 12.70 73.03 66.68 115.R.A-200.A-050.WEL.XX.XXX
2” x 3/4” 50.80 19.05 73.03 66.68 115.R.A-200.A-075.WEL.XX.XXX
2” x 1” 50.80 25.40 73.03 66.68 115.R.A-200.A-100.WEL.XX.XXX
2” x 1”1/2 50.80 38.10 73.03 66.68 115.R.A-200.A-150.WEL.XX.XXX
2”1/2 x 1/2” 63.50 12.70 79.38 73.03 115.R.A-250.A-050.WEL.XX.XXX
2”1/2 x 3/4” 63.50 19.05 79.38 73.03 115.R.A-250.A-075.WEL.XX.XXX
2”1/2 x 1” 63.50 25.40 79.38 73.03 115.R.A-250.A-100.WEL.XX.XXX
2”1/2 x 1”1/2 63.50 38.10 79.38 73.03 115.R.A-250.A-150.WEL.XX.XXX
2”1/2 x 2” 63.50 50.80 79.38 73.03 115.R.A-250.A-200.WEL.XX.XXX
3” x 1/2” 76.20 12.70 79.38 73.03 115.R.A-300.A-050.WEL.XX.XXX
3” x 3/4” 76.20 19.05 79.38 73.03 115.R.A-300.A-075.WEL.XX.XXX
3” x 1” 76.20 25.40 79.38 73.03 115.R.A-300.A-100.WEL.XX.XXX
3” x 1”1/2 76.20 38.10 79.38 73.03 115.R.A-300.A-150.WEL.XX.XXX
3” x 2” 76.20 50.80 79.38 73.03 115.R.A-300.A-200.WEL.XX.XXX
3” x 2”1/2 76.20 63.50 79.38 73.03 115.R.A-300.A-250.WEL.XX.XXX
4” x 1/2” 101.60 12.70 104.78 92.08 115.R.A-400.A-050.WEL.XX.XXX
4” x 3/4” 101.60 19.05 104.78 92.08 115.R.A-400.A-075.WEL.XX.XXX
4” x 1” 101.60 25.40 104.78 92.08 115.R.A-400.A-100.WEL.XX.XXX
4” x 1”1/2 101.60 38.10 104.78 92.08 115.R.A-400.A-150.WEL.XX.XXX
4” x 2” 101.60 50.80 104.78 98.43 115.R.A-400.A-200.WEL.XX.XXX
4” x 2”1/2 101.60 63.50 104.78 98.43 115.R.A-400.A-250.WEL.XX.XXX
4” x 3” 101.60 76.20 104.78 98.43 115.R.A-400.A-300.WEL.XX.XXX
6” x 1/2” 152.40 12.70 142.88 117.48 115.R.A-600.A-050.WEL.XX.XXX
6” x 3/4” 152.40 19.05 142.88 117.48 115.R.A-600.A-075.WEL.XX.XXX
6” x 1” 152.40 25.40 142.88 117.48 115.R.A-600.A-100.WEL.XX.XXX
6” x 1”1/2 152.40 38.10 142.88 117.48 115.R.A-600.A-150.WEL.XX.XXX
6” x 2” 152.40 50.80 142.88 123.83 115.R.A-600.A-200.WEL.XX.XXX
6” x 2”1/2 152.40 63.50 142.88 123.83 115.R.A-600.A-250.WEL.XX.XXX
6” x 3” 152.40 76.20 142.88 123.83 115.R.A-600.A-300.WEL.XX.XXX
6” x 4” 152.40 101.60 142.88 130.18 115.R.A-600.A-400.WEL.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 27

 Welding Accessories
DT-4.1.3-1 (ex DT-11) CONCENTRIC REDUCERS

TECHNICAL SPECIFICATIONS CONCENTRIC REDUCERS DT-4.1.3-1

Nominal Size AD ad L Part Numbers
(mm) (mm) (mm)

3/8” x 1/4” 9.53 6.35 41.28 108.BWE.A-0375.A-025.BWE.XX.XXX

1/2” x 1/4” 12.70 6.35 47.63 108.BWE.A-050.A-025.BWE.XX.XXX
1/2” x 3/8” 12.70 9.53 47.63 108.BWE.A-050.A-0375.BWE.XX.XXX
3/4” x 3/8” 19.05 9.53 50.80 108.BWE.A-075.A-0375.BWE.XX.XXX
3/4” x 1/2” 19.05 12.70 53.98 108.BWE.A-075.A-050.BWE.XX.XXX
1” x 1/2” 25.40 12.70 63.50 108.BWE.A-100.A-050.BWE.XX.XXX
1” x 3/4” 25.40 19.05 53.98 108.BWE.A-100.A-075.BWE.XX.XXX
1”1/2 x 3/4” 38.10 19.05 76.20 108.BWE.A-150.A-075.BWE.XX.XXX
1”1/2 x 1” 38.10 25.40 63.50 108.BWE.A-150.A-100.BWE.XX.XXX
2” x 1” 50.80 25.40 85.73 108.BWE.A-200.A-100.BWE.XX.XXX
2” x 1”1/2 50.80 38.10 63.50 108.BWE.A-200.A-150.BWE.XX.XXX
2”1/2 x 1”1/2 63.50 38.10 85.73 108.BWE.A-250.A-150.BWE.XX.XXX
2”1/2 x 2” 63.50 50.80 63.50 108.BWE.A-250.A-200.BWE.XX.XXX
3” x 1”1/2 76.20 38.10 107.95 108.BWE.A-300.A-150.BWE.XX.XXX
3” x 2” 76.20 50.80 85.73 108.BWE.A-300.A-200.BWE.XX.XXX
3” x 2”1/2 76.20 63.50 66.68 108.BWE.A-300.A-250.BWE.XX.XXX
4” x 2” 101.60 50.80 130.18 108.BWE.A-400.A-200.BWE.XX.XXX
4” x 2”1/2 101.60 63.50 107.95 108.BWE.A-400.A-250.BWE.XX.XXX
4” x 3” 101.60 76.20 98.43 108.BWE.A-400.A-300.BWE.XX.XXX
6” x 3” 152.40 76.20 184.15 108.BWE.A-600.A-300.BWE.XX.XXX
6” x 4” 152.40 101.60 142.88 108.BWE.A-600.A-400.BWE.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

28 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

Welding Accessories
DT-4.1.3-1 (ex DT-11) ECCENTRIC REDUCERS

TECHNICAL SPECIFICATIONS ECCENTRIC REDUCERS DT-4.1.3-1

Nominal Size AD ad L part Numbers
(mm) (mm) (mm)

3/8” x 1/4” 9.53 6.35 41.28 109.BWE.A-0375.A-025.BWE.XX.XXX

1/2” x 1/4” 12.70 6.35 47.63 109.BWE.A-050.A-025.BWE.XX.XXX
1/2” x 3/8” 12.70 9.53 47.63 109.BWE.A-050.A-0375.BWE.XX.XXX
3/4” x 3/8” 19.05 9.53 50.80 109.BWE.A-075.A-0375.BWE.XX.XXX
3/4” x 1/2” 19.05 12.70 53.98 109.BWE.A-075.A-050.BWE.XX.XXX
1” x 1/2” 25.40 12.70 63.50 109.BWE.A-100.A-050.BWE.XX.XXX
1” x 3/4” 25.40 19.05 53.98 109.BWE.A-100.A-075.BWE.XX.XXX
1”1/2 x 3/4” 38.10 19.05 76.20 109.BWE.A-150.A-075.BWE.XX.XXX
1”1/2 x 1” 38.10 25.40 63.50 109.BWE.A-150.A-100.BWE.XX.XXX
2” x 1” 50.80 25.40 85.73 109.BWE.A-200.A-100.BWE.XX.XXX
2” x 1”1/2 50.80 38.10 63.50 109.BWE.A-200.A-150.BWE.XX.XXX
2”1/2 x 1”1/2 63.50 38.10 85.73 109.BWE.A-250.A-150.BWE.XX.XXX
2”1/2 x 2” 63.50 50.80 63.50 109.BWE.A-250.A-200.BWE.XX.XXX
3” x 1”1/2 76.20 38.10 107.95 109.BWE.A-300.A-150.BWE.XX.XXX
3” x 2” 76.20 50.80 85.73 109.BWE.A-300.A-200.BWE.XX.XXX
3” x 2”1/2 76.20 63.50 66.68 109.BWE.A-300.A-250.BWE.XX.XXX
4” x 2” 101.60 50.80 130.18 109.BWE.A-400.A-200.BWE.XX.XXX
4” x 2”1/2 101.60 63.50 107.95 109.BWE.A-400.A-250.BWE.XX.XXX
4” x 3” 101.60 76.20 98.43 109.BWE.A-400.A-300.BWE.XX.XXX
6” x 3” 152.40 76.20 184.15 109.BWE.A-600.A-300.BWE.XX.XXX
6” x 4” 152.40 101.60 142.88 109.BWE.A-600.A-400.BWE.XX.XXX
.XX.XXX = .MB.SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XX.XXX = .EP.SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 29

 Tri-Clamp Connections
DT-4.1.5-2 (ex DT-31) TRI-CLAMP CAPS

TECHNICAL SPECIFICATIONS TRI-CLAMP CAPS DT-4.1.5-2

Nominal Size A Part Numbers
(mm)

1/4” 25.00 104.000.025.XXX

3/8” 25.00 104.000.025.XXX
1/2” 25.00 104.000.025.XXX
3/4” 25.00 104.000.025.XXX
1” 50.50 104.000.050.XXX
1”1/2 50.50 104.000.050.XXX
2” 64.00 104.000.064.XXX
2”1/2 77.50 104.000.077.XXX
3” 91.00 104.000.091.XXX
4” 119.00 104.000.119.XXX
6” 167.00 104.000.167.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

30 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

Tri-Clamp Accessories
DT-4.1.1-2 (ex DT-12) 90° ELBOWS BW X TC

TECHNICAL SPECIFICATIONS 90° ELBOWS BW x TC DT-4.1.1-2

Nominal Size AD ID L Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 66.68 116.090.A-025.TCBW.XXX

3/8” 9.53 7.75 66.68 116.090.A-0375.TCBW.XXX
1/2” 12.70 9.40 76.20 116.090.A-050.TCBW.XXX
3/4” 19.05 15.75 76.20 116.090.A-075.TCBW.XXX
1” 25.40 22.10 76.20 116.090.A-100.TCBW.XXX
1”1/2 38.10 34.80 95.25 116.090.A-150.TCBW.XXX
2” 50.80 47.50 120.65 116.090.A-200.TCBW.XXX
2”1/2 63.50 60.20 139.70 116.090.A-250.TCBW.XXX
3” 76.20 72.90 158.75 116.090.A-300.TCBW.XXX
4” 101.60 97.38 203.20 116.090.A-400.TCBW.XXX
6” 152.40 146.86 292.10 116.090.A-600.TCBW.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 31

 Tri-Clamp Accessories
DT-4.1.1-3 (ex DT-16) 90° ELBOWS TC X TC

TECHNICAL SPECIFICATIONS 90° ELBOW TC x TC DT-4.1.1-3

Nominal Size AD ID L Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 41.28 123.090.A-025.025.BPE.XXX

3/8” 9.53 7.75 41.28 123.090.A-037.025.BPE.XXX
1/2” 12.70 9.40 41.28 123.090.A-050.025.BPE.XXX
3/4” 19.05 15.75 41.28 123.090.A-075.025.BPE.XXX
1” 25.40 22.10 50.80 123.090.A-100.050.BPE.XXX
1”1/2 38.10 34.80 69.85 123.090.A-150.050.BPE.XXX
2” 50.80 47.50 88.90 123.090.A-200.064.BPE.XXX
2”1/2 63.50 60.20 107.95 123.090.A-250.077.BPE.XXX
3” 76.20 72.90 127.00 123.090.A-300.091.BPE.XXX
4” 101.60 97.38 168.28 123.090.A-400.119.BPE.XXX
6” 152.40 146.86 266.70 123.090.A-600.167.BPE.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

32 [email protected]
[email protected] Tel: +41
Tel: 52
+41725
52 10
7251010 10 www.aseptconn.ch
www.aseptconn.ch 27
Tri-Clamp Accessories
DT-4.1.1-5 (ex DT-13) 45° ELBOWS BW X TC

TECHNICAL SPECIFICATIONS 45° ELBOW BW x TC DT-4.1.1-5

Nominal Size AD ID L Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 50.80 116.045.A-025.TCBW.XXX

3/8” 9.53 7.75 50.80 116.045.A-0375.TCBW.XXX
1/2” 12.70 9.40 57.15 116.045.A-050.TCBW.XXX
3/4” 19.05 15.75 57.15 116.045.A-075.TCBW.XXX
1” 25.40 22.10 57.15 116.045.A-100.TCBW.XXX
1”1/2 38.10 34.80 63.50 116.045.A-150.TCBW.XXX
2” 50.80 47.50 76.20 116.045.A-200.TCBW.XXX
2”1/2 63.50 60.20 85.73 116.045.A-250.TCBW.XXX
3” 76.20 72.90 92.08 116.045.A-300.TCBW.XXX
4” 101.60 97.38 114.30 116.045.A-400.TCBW.XXX
6” 152.40 146.86 158.75 116.045.A-600.TCBW.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 33

 Tri-Clamp Accessories
DT-4.1.1-6 (ex DT-17) 45° ELBOWS TC X TC

TECHNICAL SPECIFICATIONS 45° ELBOW TC x TC DT-4.1.1-6

Nominal Size AD ID L Part Numbers
(mm) (mm) (mm)

1/4” 6.35 4.57 25.40 123.45.A-025.XXX

3/8” 9.53 7.75 25.40 123.45.A-0375.XXX
1/2” 12.70 9.40 25.40 123.45.A-050.XXX
3/4” 19.05 15.75 25.40 123.45.A-075.XXX
1” 25.40 22.10 28.58 123.45.A-100.XXX
1”1/2 38.10 34.80 36.53 123.45.A-.150.XXX
2” 50.80 47.50 44.45 123.45.A-200.XXX
2”1/2 63.50 60.20 52.40 123.45.A-250.XXX
3” 76.20 72.90 60.33 123.45.A-300.XXX
4” 101.60 97.38 79.38 123.45.A-400.XXX
6” 152.40 146.86 133.35 123.45.A-600.XXX
.XXX = .SF1 - Mechanical polished SF1 - Ra max < 0.51 µm
.XXX = .SF4 - Electropolished SF4 - Ra max < 0.38 µm

34 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

ASME BPE
C-22 WELD INSERTS
 ASME BPE
C-22 Weld Inserts

C-22 weld insert rings are used for additional alloying when orbital or manual welding
AL-6XN.

For most AL-6XN piping systems, the process of post-weld annealing is not feasible. In
order to improve corrosion resistance of these welds, the practice of adding an alloy
filler is required. The ring must have a higher molybdenum content than the AL-6XN
alloy to compensate for alloys dilution on cooling.

TECHNICAL SPECIFICATIONS C-22 WELD INSERTS

Nominal Size AD ID Thickness
(mm) (mm) (mm)

1/2” 12.70 9.40 1.65

3/4” 19.05 15.75 1.65
1” 25.40 22.10 1.65
1” 1/2 38.10 34.80 1.65
2” 50.80 47.50 1.65
2” 1/2 63.50 60.20 1.65
3” 76.20 72.90 1.65
4” 101.60 97.38 2.11

36 [email protected] Tel: +41 52 725 10 10 www.aseptconn.ch

 YOUR CONTACT PERSONS

In case of any questions, we will be happy to advise you.

We also like to present our products to you in your company.
PLEASE GET IN CONTACT WITH US!

Fabio Stiz
CEO / co-founder

0041 52 725 10 12
0041 79 440 89 66 (Mobile)
[email protected]

Sergio Cerenzia
COO / co-founder
Dipl. Ing. FH

0041 52 725 10 13
0041 76 568 54 12 (Mobile)
[email protected]

38 [email protected]
[email protected] Tel: 52
Tel: +41 +41725
52 10
7251010 10 www.aseptconn.ch
www.aseptconn.ch 45
 Aseptconn AG represent exclusively products of the following manufactures:

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 39

 Moosmattstrasse 24
8953 Dietikon, Schweiz

+41 52 725 10 10

[email protected]

[email protected] Tel: +41 52 725 10 10 www.aseptconn.ch 11

Moosmattstrasse 24
8953 Dietikon, Schweiz

+41 52 725 10 10

[email protected]