Scribd
Upload
54 views3 pages

Integrity DB Aau Datasheet

The document provides detailed specifications for B1/B3 AAU, including frequency ranges, output power, and mechanical dimensions. It outlines technical parameters such as noise figure, EVM, and cooling methods, along with antenna specifications like gain and polarization. The equipment is designed for 4G FDD technology with specific installation requirements and performance metrics.

Uploaded by

İlker Çırakoğlu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views3 pages

Integrity DB Aau Datasheet

The document provides detailed specifications for B1/B3 AAU, including frequency ranges, output power, and mechanical dimensions. It outlines technical parameters such as noise figure, EVM, and cooling methods, along with antenna specifications like gain and polarization. The equipment is designed for 4G FDD technology with specific installation requirements and performance metrics.

Uploaded by

İlker Çırakoğlu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

B1/B3 AAU

B1 B3 Comments
DL 2110-2170 1805-1880
Freq. Range
UL 1920-1980 1710-1785
TX/RX Configuration 4T4R 4T4R
Technology 4G FDD 4G FDD
Equivalent Output Power/TX 4 x 40W 4 x 60W
EIRP 63.6dBm 64.6dBm @ ET Degree: 5
IBW (MHz) 60 75
OBW (MHz) 40 40
Max # of carriers per path 2 2
Carrier BW (MHz) 5, 10, 15, 20 5, 10, 15, 20
Supported QAM TX: up to 256QAM, RX: 64QAM
25°C 1.9dB 1.9dB
Noise Figure (dB)
All Temperature 2.5dB 2.5dB
EVM < 6 % for 64 QAM, < 3.5 % for 256 QAM
ORAN interface eCPRI 7.2 Cat A
Optical ports 1 x SFP+ 10GE or 1 x SFP28 25GE, eCPRI
Unwanted emissions 3GPP 36.104 Category A
Tx spurious emissions 3GPP 36.104 Category A
Power consumption(W) Typical 920W @ Maximum output power
Operating Temperature -40 ~ +55C
DC Input -40 to -57 VDC, Nominal -48VDC
Ingress Protection of enclosure IP65
Cooling Natural Convection (No FAN)
Dimension (mm) 1739.0 x 496.0 x 269.0
Mechanical
Weight (Kg) 68 Kg
B1/B3 AAU – Mechanical Drawing
Without clamp
⚫ Size : 1739.0 x 496.0 x 269.0 (mm)
⚫ Weight : 68kg
496mm 1739mm 269mm

3
4

Port Name Connector Type Vendor


1 DC Power CT48J-2ZS63Y-20 JONHON

2 2 Optic1(B1/B3) PDLC03T03-A-10 JONHON Installation Pole Diameter


1 3 LMT RJ45 Standard ⚫ 50~90 (mm)
4 Debug USB-C Standard
B1/B3 Antenna Specification
B1/B3 Antenna
Parameters
B1 B3
DL 2110-2170 1805-1880
Frequency Band [MHz]
UL 1920-1980 1710-1785
Polarization [°] ±45°
0T 18.9 18.2
Gain [dBi] 5T 19.3 18.5
10T 18.8 18.2
VSWR [dB] 1.5
Return Loss [dB] 14
Cross Polar Isolation [dB] 25
Port to Port Isolation [dB] 25
Passive Intermodulation, 2x 43dBm [dBc] -150
Max. Effective Power per Port [W] 200
Impedance [Ω] 50
Azimuth Beam width [°] 61±8 66±6
Front to Back Ratio, Co polar [dB], @180±30° 27
Cross Polar Discrimination at Boresight [dB] 19
Elevation Beam width [°] 6.2±0.7 7.0±0.7
Electrical Down tilt [°] 0-10
First Upper Side Lobe Suppression [dB] 12

You might also like