Scribd
Upload
9 views1 page

Assignment 05

The document outlines Assignment 05 for the Engineering Graphics and Design course, focusing on the projection of solids. It includes instructions for drawing projections of various geometric shapes such as cylinders, cones, cubes, pyramids, and prisms, emphasizing neatness and proper engineering lettering. Specific dimensions and orientations for each object are provided to guide the drawing process.

Uploaded by

Mohan Bpt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
9 views1 page

Assignment 05

The document outlines Assignment 05 for the Engineering Graphics and Design course, focusing on the projection of solids. It includes instructions for drawing projections of various geometric shapes such as cylinders, cones, cubes, pyramids, and prisms, emphasizing neatness and proper engineering lettering. Specific dimensions and orientations for each object are provided to guide the drawing process.

Uploaded by

Mohan Bpt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Paper Name: Engineering Graphics and Design

Paper Code: BES09014


Assignment 05
Title: Projection of Solids
(To be marked as sheet 05)

 Special credit will be given to the neatly drawn drawing sheets, good
presentation of the problems and space planning on the drawing sheets.
 All the statements on the drawing sheets must be written in proper
engineering lettering with the letter-case.
 Draw the projections of top, front and side views.

Q.1 Draw the projections of the following objects, resting on the


H.P. on their bases.
i. A cylinder, base 40 mm diameter and height 50 mm long.
ii. A cone, base 40 mm dia. And height 60 mm long.

Q.2. A cube of side 50 mm long is resting on H.P., draw its


projections when
i. Its vertical faces are parallel to V.P.
ii. Its vertical faces are equally inclined to V.P.

Q3. Draw the projections of a hexagonal pyramid base 30 mm side


and height 60 mm long, having its base on the H.P. and one of
the edges of the base inclined at 450 to the V.P.

Q4. Draw the projections of a pentagonal pyramid base 30 mm side


and height 70 mm long, having its base on the H.P. and one of
the edges of the base inclined at 600 to the V.P.

Q5. A hexagonal prism has one of its rectangular faces parallel to


the H.P. its axis is perpendicular to the V.P. and 3.5 cm above
the ground. Take length of the prism as 50 mm & side as 30 mm.

Department of Mechanical Engineering, Brainware University, Barasat

You might also like