Scribd
Upload
10 views8 pages

What Do You Mean by Load Line of Diode ? Load Line I-V Characteristic Curve

The document explains various concepts related to diodes, including the depletion region, cut-in voltage, and the functioning of Zener diodes as voltage regulators. It also covers the I-V characteristics of p-n junction diodes under forward and reverse bias, the breakdown mechanisms, and the principles of photodiodes and solar cells. Additionally, it discusses static and dynamic resistance, tunnel diodes, and key terms like peak inverse voltage and reverse leakage current.

Uploaded by

sahapamela391
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views8 pages

What Do You Mean by Load Line of Diode ? Load Line I-V Characteristic Curve

The document explains various concepts related to diodes, including the depletion region, cut-in voltage, and the functioning of Zener diodes as voltage regulators. It also covers the I-V characteristics of p-n junction diodes under forward and reverse bias, the breakdown mechanisms, and the principles of photodiodes and solar cells. Additionally, it discusses static and dynamic resistance, tunnel diodes, and key terms like peak inverse voltage and reverse leakage current.

Uploaded by

sahapamela391
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

CO2

What do you mean by depletion region of p-n junction diode?

Depletion region or depletion layer is a region in a P-N junction diode where no mobile charge
carriers are present. Depletion layer acts like a barrier that opposes the flow of electrons from n-side
and holes from p-side.

What do you mean by Cut-in voltage ?

The voltage at which the forward diode current begins to start increasing rapidly is known as the
cut-in voltage of a diode. This cut-in voltage is very near to the barrier potential.

Explain how a zener diode can be used as voltage regulator ?

A Zener diode can be used as a voltage regulator by utilizing its ability to maintain a stable output
voltage in the reverse breakdown region. When connected in reverse bias and with an input voltage
higher than the Zener voltage, the Zener diode clamps the output voltage at its Zener voltage (VZ​),
regardless of input voltage variations or load changes (within limits).
A series resistor is used to limit current, and the Zener diode regulates the voltage across the load.
This method is simple and cost-effective for low-power applications. However, it's less efficient for
high-power loads due to heat dissipation and limited current handling capacity.

What do you mean by load line of Diode ?


The load line of a diode represents the relationship between the voltage across the diode and
the current flowing through it, based on the external circuit. It is derived from the circuit's
components, such as the series resistor, and is plotted on the diode’s I-V characteristic
curve. The load line shows how the diode's operating point changes with varying voltage and
current.
The load line is a straight line with a negative slope, and its intersection with the diode's
characteristic curve gives the operating point (voltage and current) of the diode in the circuit.
It helps in analyzing how the diode behaves under different load conditions.

What do you mean by mechanism of breakdown of zener diode. Differentiate between


Avalanche and Zener Breakdown.
The process in which the electrons move across the barrier from the valence band of p-type
material to the conduction band of n-type material is known as Zener breakdown.
Interpret the I-V characteristics of p-n junction diode under forward and reverse bias.
The I-V characteristics of a p-n junction diode show how current (I) varies with voltage (V)
under forward and reverse bias conditions:
Forward Bias:
At low voltages (below ~0.7V for silicon), current is very small.
Once the voltage exceeds the threshold (~0.7V for silicon), current increases rapidly in an
exponential manner.
The diode conducts a large current once the voltage is sufficiently high.
Reverse Bias:
Only a very small leakage current flows until the reverse voltage reaches the breakdown
voltage.
Beyond the breakdown voltage, a large reverse current flows, which can damage the diode (in
Zener diodes, this is controlled).
\
Interpret the working principle of Zener diode.
Reverse Breakdown:
Unlike a regular p-n junction diode, which breaks down and conducts a large current when
the reverse voltage exceeds its breakdown voltage, a Zener diode is specifically designed to
operate in this region. It has a well-defined Zener breakdown voltage (VZ​), typically ranging
from 2V to several hundred volts.
Zener Breakdown Mechanism:
In reverse bias, when the voltage across the Zener diode exceeds its breakdown voltage, the
electric field across the junction becomes strong enough to pull electrons from their covalent
bonds, causing a sharp increase in current. This is known as Zener breakdown.
The Zener diode remains in this breakdown region without damage, as it allows the current to
flow while maintaining a constant voltage (the Zener voltage VZ​).
Voltage Regulation:
When used in a circuit, the Zener diode acts as a voltage regulator. Once the reverse voltage
reaches the Zener voltage, the diode starts conducting and maintains the output voltage at VZ​,
regardless of variations in input voltage (as long as it is above VZ​) or changes in the load
current (within the diode's current limits).
Reverse Saturation Current:
Below the breakdown voltage, the current through the Zener diode is minimal, similar to a
regular diode. However, once the breakdown voltage is reached, it allows current to flow and
keeps the voltage constant.

Interpret the working principle of photodiode.


Reverse Bias Operation:
A photodiode is typically connected in reverse bias, where the p-side (anode) is connected to
the negative terminal and the n-side (cathode) to the positive terminal of the power supply.
Absorption of Light:
When light (photons) strikes the p-n junction of the photodiode, it excites electrons in the
semiconductor material, creating electron-hole pairs.
Generation of Current:
The electric field at the p-n junction (due to reverse bias) causes the free electrons to move
toward the n-side (cathode) and the holes to move toward the p-side (anode). This movement
of charge carriers generates a photocurrent.
Photocurrent:
The amount of photocurrent generated is proportional to the intensity of the incident light.
More light results in more electron-hole pairs, and hence a higher photocurrent.
Dark Current:
In the absence of light, a very small current called dark current flows through the photodiode
due to thermal generation of charge carriers. This current is negligible compared to the
photocurrent when light is present.
Voltage Response:
The voltage across the photodiode remains almost constant under reverse bias, and the
current varies based on the amount of light falling on the diode.

What is breakdown voltage of a diode

Breakdown voltage of a diode is the reverse-bias voltage at which current increases suddenly across
it. If reverse bias is increased, the current through PN junction will also increase resulting in
formation of a voltage called breakdown voltage.

What do you mean by Knee Voltage of a Diode?

Knee point voltage, also known as diode cut-in voltage, is the minimum voltage at which the diode
begins to conduct heavily and current begins to increase rapidly in a forward biased state.

What is Static and dynamic resistance of diodes ?


Static Resistance is the resistance offered by the diode to the flow of DC through it when we apply a
DC voltage to it. Mathematically the static resistance is expressed as the ratio of DC voltage applied
across the diode terminals to the DC flowing through it . It is also known as dc resistance of the pn
junction diode.

It is the function of potential difference (or current) through the material. It is defined as the ratio of
differential change in voltage to a differential change in current. R = d V d I . It is also known as ac
resistance of the pn junction diode.

Explain the working principal of Tunnel diode ?

A tunnel diode operates due to its high doping levels that create a very thin depletion region,
allowing quantum tunneling to occur. This causes a negative resistance region in the I-V
characteristics, where an increase in voltage results in a decrease in current. Tunnel diodes are used
in high-speed switching and high-frequency applications like oscillators and amplifiers. The key
features are quantum tunneling, negative resistance, and their ability to conduct current at very
small forward voltages.

Calculate The reverse saturation current of a diode if the current at 0.2V forward bias is 0.1mAat a
Temperature of 25 C and the identity factor is 2 5
Interpret the working principle of Solar cell using band diagram

The solar cell works by converting light into electricity using the photoelectric effect:

Light (photons) is absorbed by the semiconductor, exciting electrons to the conduction band.

The electric field at the p-n junction separates the electron-hole pairs.

The electrons flow through the external circuit, generating electric current.

The process continues as long as the solar cell is exposed to light, providing a continuous supply of
electrical energy.
How we can differentiate LED and Photodiode

Explain the formation of P-N junction and its electrical characteristics in absence of bias

The P-N junction is formed when a P-type semiconductor (with excess holes) is brought into contact
with an N-type semiconductor (with excess electrons). At the junction, electrons from the N-side
diffuse to the P-side, and holes from the P-side diffuse to the N-side, creating a depletion region
where no charge carriers exist.

In the absence of bias (no external voltage):


A built-in electric field is created in the depletion region, forming a potential barrier that prevents
further diffusion of charge carriers.

No net current flows, but a small reverse saturation current can flow due to minority carriers.

The P-N junction reaches an equilibrium condition where the diffusion current is balanced by the
drift current.

The built-in potential (typically 0.2 to 0.7 V for silicon) exists across the junction due to the difference
in Fermi levels of the P-type and N-type materials.

What do you mean by peak-inverse-voltage of a diode?

Peak Inverse Voltage (PIV) or Peak Reverse Voltage (PRV) refer to the maximum voltage a diode or
other device can withstand in the reverse-biased direction before breakdown. Also may be called
Reverse Breakdown Voltage.

What is the full-form of LED?

LED stands for Light Emitting Diode.

What do you mean by reverse or leakage current in a diode?

The leakage current in a diode is the current that the diode will leak when a reverse voltage is
applied to it. Under the reverse bias, a very small current in UA, flows across the junction. This is due
to the flow of the minority charge carriers called the leakage current or reverse saturation current.

You might also like