MIG 400 Synergic KG
290-031105-00000
Standard MIG/MAG welding machine, compact, mobile, gas cooled
Standard MIG/MAG, MMA and TIG welding
TIG lift arc welding
Synergic or manual welding mode
Adjustable start and end crater functions
Simple, tool-free changing of polarity
Infinitely adjustable arc dynamics (choke effect)
Large power reserves thanks to high duty cycle with all components heating up
less as a result, guaranteeing a longer service life for machines when in use
Integrated 4-roll drive
Equipped for 1.2-mm steel wire
Earth fault monitoring (PE protection)
Inverter technology: Compact design, energy-saving thanks to high efficiency
and standby function
High mains voltage tolerances, therefore generator-compatible without any
restrictions
Production and repair work in workshops, for assembly work and on
construction sites
Inside and outside
Steel and other metal construction
Container construction and machine and plant engineering
Façade, heating and ventilation construction
Mining operations
Building construction and road-building
MIG/MAG MMA TIG
Setting range for welding current 5 A - 400 A
Duty cycle at ambient t.e 40 °C
40 % 400 A
60 % 350 A
100 % 300 A
Open circuit voltage 79 V
Mains frequency 50 Hz / 60 Hz
Max. connected load 17.2 kVA 18.2 kVA 13.2 kVA
Recommended generator power 23.2 kVA 24.6 kVA 17.8 kVA
cos φ 0.99
Efficiency 88 %
Dimensions machine, LxWxH in mm 1085 x 450 x 1003
Weight, machine 103 kg
Protection classification IP 23
Insulation class H
Torch connection Euro torch connector
Standards IEC 60 974-1; -5; -10 / S-Safety sign / EMC class A
20.03.2018
TEAMWELDER Germany GmbH Tel.: +49 2623 9276-400, Fax.: -444 https://www.teamwelder.com/
The content of this document has been prepared and reviewed with all reasonable care.
The information provided is subject to change, errors excepted.
Welding site equipment for MIG/MAG welding
AK300
094-001803-00001
Wire spool adapter for use with a wire basket spool (B 300)
WK70mm² 450A/60% 4m/Z
092-000013-00000
Workpiece lead with clamp
DM 842 Ar/CO2 230bar 30l D
394-002910-00030
Pressure regulator with manometer
Manufactured in accordance with ISO 2503
Maximum primary pressure of 230 bar
Single-stage
Infinite and highly accurate adjustment
Safety manometer with pressure meter or flow meter (bar/psi or litres per
minute)
With cut-off valve
GH 2x1/4'' 2m
094-000010-00001
Shielding gas hose
Equipped with plastic nuts on both sides for tool-free assembly
20.03.2018
TEAMWELDER Germany GmbH Tel.: +49 2623 9276-400, Fax.: -444 https://www.teamwelder.com/
The content of this document has been prepared and reviewed with all reasonable care.
The information provided is subject to change, errors excepted.
Welding site equipment for MIG/MAG welding
UM 36 G 4m
394-600003-00004
Gasgekühlter Standard-MIG/MAG-Schweißbrenner
Ergonomische Griffschale mit Kugelgelenk
Knickschutzfeder am Brenner sowie am Anschluss
Typbezogene Standardverschleißteile
Ausrüstung ab Werk (Stahldraht Ø 1,2):
Gasdüse konisch Ø 16 mm; 84 mm
Gasverteiler 32,5 mm
Stromdüse M8 x 30 mm; Ø 1,2 mm
Düsenstock M8 x 35 mm
20.03.2018
TEAMWELDER Germany GmbH Tel.: +49 2623 9276-400, Fax.: -444 https://www.teamwelder.com/
The content of this document has been prepared and reviewed with all reasonable care.
The information provided is subject to change, errors excepted.
Accessories
FE 2DR4R 0.8+1.0
092-000840-00000
Spare rolls for steel wire (standard steel model)
Includes two drive rolls
AL 4ZR4R 0.8+1.0
092-000869-00000
Replacement rolls for aluminium wire
Includes four drive rolls
ROE 2DR4R 0.8/0.9+0.8/0.9
092-000834-00000
Spare rollers flux cored wire
Includes two drive rolls
ROE 2GR4R
092-000838-00000
Replacement pressure rollers for flux cored wire
URUE AL 4ZR4R 0.8+1.0
092-000867-00000
Sets for conversion from steel standard to optional alu
Includes 4 drive rolls and 2 gears
20.03.2018
TEAMWELDER Germany GmbH Tel.: +49 2623 9276-400, Fax.: -444 https://www.teamwelder.com/
The content of this document has been prepared and reviewed with all reasonable care.
The information provided is subject to change, errors excepted.
Accessories
URUE ROE 2DR4R 0.8/0.9+0.8/0.9
092-000830-00000
Sets for conversion from steel standard to optional flux cored wire
Includes two drive rolls, two pressure rolls and two gears
20.03.2018
TEAMWELDER Germany GmbH Tel.: +49 2623 9276-400, Fax.: -444 https://www.teamwelder.com/
The content of this document has been prepared and reviewed with all reasonable care.
The information provided is subject to change, errors excepted.
Powered by TCPDF (www.tcpdf.org)
