0% found this document useful (0 votes)

41 views86 pages

Phulbani-CPM Technical Documents - 22.01.2025 (1) CO

The document outlines the technical specifications and control methodology for the Chiller Plant Manager at Odisha Hospital & Medical College. It details the equipment involved, including water-cooled chillers and pumps, as well as the operational sequences for efficient management of the chiller plant. The Chiller Plant Manager is designed to optimize operations through advanced control systems and communication protocols, ensuring energy efficiency and effective monitoring.

Uploaded by

rajkishornayak697

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

41 views86 pages

Phulbani-CPM Technical Documents - 22.01.2025 (1) CO

Uploaded by

rajkishornayak697

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 86

TECHNICAL DOCUMENTS

FOR
CHILLER PLANT MANAGER

Project Name: Odisha Hospital & Medical college, Phulbani (Odisha)

Package Name: SITC of Chiller Plant Manager

Submitted by: DB AIRE India Pvt. Ltd.

Date: 22.01.2025

Govt. Medical College Phulbani

Near NH -157, At -Rujangi, Teraguda,
ilakpara, PO/PS- Khajuripada, Infront of Narayani
Hero Showroom Phulbani - 762001,

SPCPL D&B COMMENT ;-

1) Last previous comment No 3
and 5 are not incorporated.

Code B -Approved with comments,

27-01-2025
1
Page
Content:
 IO Summary
 Control Methodology
 Technical document for CPM

IO Summary:

Sr. Description Qty DI DO AI AO SW

A Chiller Plant (Water Cooled Chiller) 4
1 Chiller On/Off command 4
2 Chiller On/Off status
3 Chiller Run status 4
4 Chiller Trip status 4
5 Chiller Auto/Manual Status 4
6 Chiller Outlet isolation valve Open/Close command 4
7 Chiller Outlet isolation valve Open/Close status 4
Condenser Water inlet isolation valve Open/Close
8 4
command
9 Condenser Water inlet isolation valve Open/Close status 4
10 Individual CHW supply temperature 4
11 Individual CHW return temperature 4
B Header 1
1 Outside Air Temp 1
2 Humidity 1
3 Common Chilled Water supply header temperature 1
4 Common Chilled Water return header temperature 1
5 Common Condenser Water supply header temperature 1
6 Common Condenser Water return header temperature 1
7 Supply/return header Bypass valve command
8 Supply/return header Bypass valve Status
9 Diff. pressure across Header 1
# Total points for Chiller Plant 20 12 7 0 8
C Primary Chilled Water Pumps 4
1 Pump Auto/Manual status 4
2 Pump On/Off command 4
3 Pump On/Off Status
2
Page

4 Pump run status 4

5 Pump trip status 4
# Total points for Chilled Water Pumps 12 4 0 0 0
E SecondaryWater Pumps -Variable 4
1 Pump Auto/Manual status 4
2 Pump On/Off command 4
3 Pump On/Off Status
4 Pump run status 4
5 Pump trip status 4
6 Pump VFD control 4
7 Pump VFD feedbback 4
8 VFD Soft Integration 40
# Total points for Secondary Water Pumps 12 4 4 4 40
E Condenser Water Pumps 4
1 Pump Auto/Manual status 4
2 Pump On/Off command 4
3 Pump On/Off Status
4 Pump run status 4
5 Pump trip status 4
# Total points for Condenser Water Pumps 12 4 0 0 0
F Cooling Tower (CT) 4
1 CT Fan Auto/Manual status 8
2 CT Fan On/Off Command 8
3 CT Fan On /Off Status
4 CT Fan Run status 8
5 CT Fan Trip status 8
6 CT inlet/outlet Isolation valve Open/Close command 8
7 CT inlet/outlet Isolation valve Open/close status 8
8 Common CW supply header temperature
9 Common CW return header Temperature
10 CT VFD command 8
11 CT VFD feedbback 8
12 Cooling Tower Level Switch 8
13 VFD Soft Integration 40
# Total points for Cooling Tower 40 16 8 8 40
Total IO Points in the Plant Room 96 40 19 12 204
Soft Points
Sr. Description Qty DI DO AI AO SW
G Chiller Diagnostic Points DI DO AI AO SW
1 Leaving chilled liquid - setpoint 4
2 Motor current limit -setpoint 4
3 Leaving chilled liquid - temperature 4
4 Entering chilled liquid - temperature 4
5 Leaving condensor liquid - temperature 4
6 Entering condensor liquid - temperature 4
7 Evaporator pressure 4
8 Condensor pressure 4
3

9 Oil - low differential pressure 4

Page
10 Motor FLA current 4
11 Discharge pressure 4
12 Operating hours 4
13 Unit safety fault code 4
14 Unit cycling fault code 4
15 Operation Code 4
16 Evaporator - low pressure 4
17 Evaporator - low-pressure - smart freeze 4
18 Evaporator - transducer or leaving liquid probe 4
19 Condenser - high pressure 4
20 Condenser - pressure transducer out of range 4
21 Discharge - low temperature 4
22 Oil - high temperature 4
23 Oil - low differential pressure 4
24 Oil - clogged filter 4
25 Motor controller - loss of current 4
26 Oil - high pressure 4
27 Oil - separator - low level 4
28 Leaving chilled liquid - low temperature 4
29 Motor controller - loss of current 4
Total diagnostic points 116

4
Page
Table of Contents

Chiller Plant Manager (CPM)............................................................................................................. 6

Main Equipment............................................................................................................................ 6
Field Devices.................................................................................................................................. 6
Control Methodology........................................................................................................................ 7
The Basic Operation of Equipment................................................................................................ 7
Chiller Sequence............................................................................................................................ 7
Primary Pump Sequence................................................................................................................9
Secondary Pump Sequence......................................................................................................... 11
Condenser Pump Sequence.........................................................................................................12
Cooling Tower Sequence..............................................................................................................12
Bypass Valve Sequence................................................................................................................ 13
CPM Software..................................................................................................................................16
CPM Monitoring of Chillers & Field Parameters..........................................................................16
CPM Control of Equipment.......................................................................................................... 16
Alarms & Events & Notifications..................................................................................................16
Reports & Trends......................................................................................................................... 16
User Administrator.......................................................................................................................16
CPM Architecture............................................................................................................................ 17
Water Cooled Chiller Architecture...............................................................................................17
Master Controller with Slave - GA Drawing................................................................................. 18
Controllers and Sensors Technical Literature.................................................................................. 19
5
Page
Chiller Plant Manager (CPM)

The Chiller Plant manager is an advanced control system which manages and optimizes the
operation of chillers, water pumps, and other equipment in a plant room.
The Chiller plant manager provides a simple and powerful solution to the user like the
facility manager or service personnel for managing the chiller plant operations. It can be
connected to any size building automation system with the help of standard communication
protocols like Modbus and BACnet.

Main Equipment
The CPM system has the following main equipment which are listed below.
These equipment have local control panels (starter panels), and the CPM will communicate
to these local control panels to control and monitor the parameters.
 Water Cooled Chiller - 4
 Primary Chilled Water Pumps - 4
 Secondary Chilled Water Pumps - 4
 Condenser Chilled Water Pumps - 4
 Cooling Tower - 4

Field Devices
The CPM will contain the field devices to monitor certain important parameters, which is
necessary for the working and sequencing of the chiller plant equipment.
These devices are connected to CPM master/slave control which is mounted inside the CPM
panel.

The field devices which are considered in the project are listed below:

 Immersion Temperature Sensors with Thermowell

 Bi-Level switch for CT
 Ambient T&RH sensors
 Water Differential Pressure Sensor with Ball Valve
6
Page
Control Methodology

The chiller plant manager can be controlled through the following options.
 Local operation through HMI (75F-CCU)
 Remote operation through 75F facilisight

The Basic Operation of Equipment

All the plant room equipment have a particular sequence of operation to maximize energy savings
and equipment efficiency without compromising the comfort of the occupants. Following is the list of
the sequence of operation of different circuits/equipment’s:
1. Chiller Operation Sequence
2. Chilled Water Pump Operation Sequence:
o Primary Pump Sequence
o Secondary Pump Sequence
o Condenser Pump Sequence
3. Cooling Tower Operation Sequence
4. Bypass Valve Operation Sequence
Chiller Sequence
1. Pre-Start Check (Valve Feedback Integration)
 Evaporator and Condenser Valve Status:

o For any chiller to start, the evaporator and condenser valves must provide an open
feedback signal within 10 minutes of the command being issued.
o If the feedback is not received within the specified time:
 The BMS system will attempt to open the valves of the next least runtime
chiller.
 If the next chiller valves also fail to provide feedback, the system will
generate an alarm and prevent chiller startup.
 The evaporator valve is opened first, followed by the condenser valve.

2. Chiller Startup Sequence

 Lead Chiller Selection:

o The chiller with the least runtime hours is selected as the lead chiller.
 Valve Operation:
o The evaporator valve is commanded to open first, followed by the condenser valve.
o The chiller startup is delayed until both valves provide an open feedback signal.
 Primary and Condenser Pump Coordination:
7

o Once the valves are confirmed open, the associated primary pump and condenser
Page

pump start.
 Chiller ON Command:
o After the pumps are running, the chiller is commanded to start.
o The chiller begins operation and modulates cooling capacity based on the building
load.

3. Additional Chiller Activation (Load-Based Control)

 If the building load exceeds the capacity of the lead chiller:

o The system will activate the next chiller in sequence (based on runtime hours).
o The same startup sequence (valve feedback → pumps → chiller ON) applies.
 Chillers will be brought online incrementally based on load demand and system logic.

4. Chiller Shutdown Sequence

 Load-Based Shutdown:

o When the building load decreases, chillers will be turned off in reverse order (last
chiller added will be the first to shut down).
o Before shutting down a chiller:
 The primary and condenser pumps are turned off.
 The evaporator and condenser valves are commanded to close, ensuring
feedback is received.
 Scheduled Shutdown:
o Chillers can also be turned off based on a predefined schedule or manual override
command.
o Ensure all associated valves and pumps are stopped and closed sequentially.

Evaporator and Condenser Valve Sequences

1. SEQ (Automatic Operation):
o Valves open/close based on the system logic and sequence operation.
o Example: If a chiller is required to start, the evaporator valve opens first, followed by
the condenser valve.
2. ON (Manual Override):
o Valves can be manually opened via the BMS system, overriding the automatic
sequence.
3. OFF (Manual Override):
o Valves can be manually closed via the BMS system, overriding the automatic
sequence.
4. SCH (Scheduled Operation):
8
Page

o Valves open and close based on a time-based schedule defined in the BMS system.
Chiller Runtime and Switch-Over Pattern

Equal Runtime Distribution Logic:

1. The BMS system tracks the runtime of all chillers. The chiller with the least runtime becomes
the lead chiller for the next period.
2. Scheduled Switchover: The system adjusts the sequence based on runtime hours.
3.
Example Weekly Sequence for 4 Chillers:
 Week 1:
o Lead: Chiller-01
o Lag: Chiller-02
o Backup: Chiller-03
o Spare: Chiller-04
 Week 2:
o Lead: Chiller-02
o Lag: Chiller-03
o Backup: Chiller-04
o Spare: Chiller-01
 Week 3:
o Lead: Chiller-03
o Lag: Chiller-04
o Backup: Chiller-01
o Spare: Chiller-02
 Week 4:
o Lead: Chiller-04
o Lag: Chiller-01
o Backup: Chiller-02
o Spare: Chiller-03
This cycle continues in a loop, ensuring that each chiller operates as the lead chiller for one
week, then as a lag or backup chiller, and every chiller gets the same operational load over time.
For Lead Chiller Trip:
 If the lead chiller trips (due to failure or maintenance):
o The system will automatically stop the lead chiller.
o The next chiller (based on runtime hours) in the sequence will start up, and the
associated valves and pumps for that chiller will also activate.
o The sequence will adjust accordingly, ensuring that the system continues to operate
with minimal disruption.

Primary Pump Sequence

1. Pre-Start Check (Valve Feedback Integration)
o Evaporator Valve Feedback:
Ensure the evaporator valve of the associated chiller is fully open (feedback received) before starting
the corresponding primary pump.
o Condenser Valve Feedback:
Similarly, ensure the condenser valve of the associated chiller is fully open.
9

If feedback is not received from either valve, the primary pump will not start, and an alarm will be
Page

triggered in the BMS system.

2. Starting Sequence of Primary Pumps

o Lead Pump Operation:

Based on the load of the building and the number of chillers required:
The lead primary pump starts to match the flow demand of the first chiller.
The evaporator and condenser valves of the lead chiller must provide open feedback before the
pump starts.

o Additional Pumps Based on Chiller Demand:

If additional chillers are needed to meet the load:
The corresponding evaporator and condenser valves for the next chiller are checked for open
feedback.

Once verified, the next primary pump starts.

The system ensures the number of active pumps matches the number of active chillers.

3. Staggered Operation for Load Management

Pumps operate in sequence to distribute wear and tear:

The least runtime pump is selected as the next pump to start when a new chiller is activated.
As the building load decreases and chillers are shut down:
Primary pumps turn off in reverse sequence to avoid rapid cycling.

4. Stopping Sequence of Primary Pumps

Chiller Shutdown:
When a chiller is scheduled to turn off, the corresponding primary pump shuts down after the
evaporator valve and condenser valve are fully closed.
If multiple chillers are operating, the pumps associated with the running chillers remain active.

Operating Modes of Primary Pumps

SEQ (Automatic Operation):

Pumps operate based on the logic programmed in the BMS system, matching the building load and
active chiller requirements.
Valve feedback ensures pumps are safely started and stopped.
ON (Manual Override):
Pumps can be manually turned ON through the BMS interface, overriding the sequence logic.
OFF (Manual Override):

Pumps can be manually turned OFF through the BMS interface, overriding the sequence logic.
SCH (Scheduled Operation):

Pumps operate based on a pre-defined schedule in the BMS system.

This schedule can be linked to calendar events or specific time periods.
DISABLE (Emergency Stop):

Pumps can be force-stopped in case of a fault, emergency, or maintenance requirement.

When disabled, the pump will not operate until manually re-enabled.
10
Page
Secondary Pump Sequence
4 number of variable secondary pumps equipped with VFDs (Variable Frequency Drives) for
modulation.

Soft Integration via VFD:

VFDs will modulate pump speed based on the PID output and DP sensor feedback, ensuring the
pumps operate efficiently to maintain the differential pressure in the CHW (Chilled Water) header.
Soft start/stop functionality will reduce mechanical stress on the pumps during operation.

Secondary Pump Location:

Positioned in the plant room approximately 50 meters away from the main chilled water headers.
Ensure proper isolation valves are installed at the pump suction and discharge points for
maintenance purposes.

Chilled Water Piping:

The chilled water pipes are running 1.8 meters below ground level. Ensure sufficient vertical
clearance and accessibility for maintenance.

Differential Pressure (DP) Sensor Location:

The DP sensor should be installed across the CHW supply and return headers.
Optimal placement: at the farthest point of the system (e.g., at the last AHU or FCU in the building)
to ensure accurate pressure feedback.
Avoid placing the sensor near bends, junctions, or turbulent flow zones to maintain accurate
readings.

Operation of Secondary Pumps

Pump Operations Based on PID Output:
When PID Output > 70%: Pump turns OFF (demand is low).
When PID Output < 40%: Pump turns ON (demand is high).
Pump speed modulation depends on the PID signal to maintain the required pressure in the CHW
headers.

Sequence Control:
Pumps will operate in sequence based on runtime hours:
If the lead pump trips, the least runtime pump starts automatically.
This ensures even distribution of wear and tear among all pumps.

Valve Feedback Integration:

Pumps will respond to the position feedback of control valves (e.g., AHU or FCU valves).
If valves open, indicating increased flow demand, pump operation is triggered accordingly.

Pump Commands in BMS Logic:

SEQ (Auto Command):
Pumps operate automatically based on the logic programmed in the BMS system.
ON (Manual Override):
Pumps can be turned ON manually from the BMS interface.
OFF (Manual Override):
Pumps can be turned OFF manually from the BMS interface.
SCH (Schedule Mode):
11

Pumps operate ON/OFF based on the schedule defined in the BMS system.
Page
Chiller Dependency:
The operation of secondary pumps will follow the chiller's operating state (ON, OFF, schedule,
sequence, or disabled).

Condenser Pump Sequence

Need to get OPEN Feedback from evaporator, condenser and cooling tower (inlet and outlet) valve of
the lead chiller and Cooling Tower

1. System Pre-Start Checks (Valve Feedback Integration)

Evaporator Valve:
Ensure the evaporator valve (inlet and outlet) of the lead chiller is in the fully open position before
starting any condenser pump.
Condenser Valve:
Once the evaporator valve is confirmed open,the condenser valve will also fully open.
Cooling Tower Valves:

Confirm that the cooling tower inlet and outlet valves are fully open.
If any valve feedback indicates a "closed" or "fault" position, the condenser pump will not start, and
an alarm will be triggered in the BMS system.

2. Starting Sequence of Condenser Pumps

Lead Condenser Pump Start-Up:

After confirmation of the valve open statuses:
The lead condenser pump will start.
It will operate along with the primary pump, secondary pump, and the lead chiller to ensure proper
flow through the condenser loop.

Ramp-Up Based on Condenser Outlet Feedback:

The lead pump speed will modulate via VFD to maintain the flow and temperature setpoint at the
condenser outlet.

Staggered Start for Additional Pumps:

If the system flow demand increases (e.g., multiple chillers operating):
The next condenser pump will start based on the condenser flow or pressure requirement.
The pump with the least runtime hours will be selected as the next pump to start.
Once the additional pump is started, its speed will also modulate based on system requirements.

3. Tripped Pump Handling

If the lead condenser pump trips, the following sequence occurs:
The pump with the least runtime hours automatically starts as the backup.
The BMS system will log the fault and notify the operator of the tripped pump.

4. Stopping Sequence of Condenser Pumps

System Shut-Down:
When the chiller and associated primary/secondary pumps are scheduled to shut down, the
following occurs:
The condenser pump ramps down and turns off.
The condenser and evaporator valves close after the pump stops.
12

If multiple chillers are running, the condenser pump associated with the last running chiller will shut
Page

down last.
Modes of Operation for Condenser Pump Control

SEQ (Automatic Operation):

Pumps operate automatically based on BMS logic and sequence.
They respond to the open status of evaporator, condenser, and cooling tower valves.

ON (Manual Override):
Pumps can be turned ON manually through the BMS interface, overriding the sequence logic.

OFF (Manual Override):

Pumps can be turned OFF manually through the BMS interface, overriding the sequence logic.
SCH (Scheduled Operation):
Pumps operate based on a pre-defined schedule in the BMS system, enabling automatic ON/OFF
control based on time.

Key Notes for Implementation

Valve Feedback and Interlocks:

Ensure reliable feedback signals for valve positions (fully open/closed).

Include interlocks in the BMS to prevent pump operation if valve feedback is faulty.
Flow and Pressure Sensors:

Install flow/pressure sensors at the condenser outlet for accurate ramp-up/down control of pump
speed via VFD.
Equal Runtime Distribution:

Implement a runtime tracking logic in the BMS to evenly distribute runtime hours among all pumps.
Cooling Tower Integration:

Ensure cooling tower operation is fully synchronized with condenser pump operation to avoid dry
running or cavitation issues.

Cooling Tower Sequence

Cooling Tower inlet and outlet valve need to get open feedback for which cooling tower gets turned
ON.

Cooling towers are enabled only if the chiller command is active.

Each cooling tower cell will operate based on:
Condenser valve status.
Cooling tower inlet temperature (>30°C to start).
Cooling tower outlet temperature (<26°C to stop).
Level switch feedback to ensure sufficient water levels in the basin.
Cooling tower fan speeds are controlled by variable frequency drives (VFD) based on temperature
conditions.

The sequence ensures balanced utilization among the towers by alternating their priority.
Start-Up Sequence
Chiller Command Enabled:
Check the chiller's "ON" command status.
13

Verify the condenser valve is fully open (feedback signal required).

Page
Cooling Tower Valves Open:
For each cooling tower, ensure the inlet and outlet valves receive an open command.
Confirm valve feedback (open status) before proceeding.

Inlet Temperature Check:

Check the cooling tower inlet water temperature.
If the inlet temperature exceeds 30°C, the corresponding cooling tower fan (Cell 1 and/or Cell 2)
ramp up gradually to maintain efficient cooling.

Cooling Tower Fan Start:

Fan frequency is increased proportionally to control the outlet water temperature.
Start priority alternates among the towers (e.g., CT1 first, followed by CT2, then CT3, and so on).

Outlet Temperature Control:

Monitor the outlet water temperature.
If the outlet temperature reaches 26°C or below, reduce the fan speed or turn off the fan (depending
on the cooling demand).

Level Switch Check:

Monitor level switches in the cooling tower basin.
If the water level is insufficient, issue a fault alarm and prevent cooling tower operation.
Shut-Down Sequence

Chiller Command Disabled:

Receive the "OFF" command from the chiller.

Condenser Valve Closure:

Close the condenser water valve after confirming the chiller is off.
Wait for feedback that the condenser valve is fully closed.

Cooling Tower Valve Closure:

Issue a close command for the cooling tower inlet and outlet valves.
Confirm feedback that valves are fully closed.

Cooling Tower Fan Shut-Down:

Turn off the fan(s) only after valves are confirmed closed.
Stop fans in the reverse sequence of start-up (last started = first stopped).

Cooling Tower Alternation Logic

Daily Alternation:
 Day 1: CT1 → CT2 → CT3 → CT4
 Day 2: CT2 → CT3 → CT4 → CT1
 Day 3: CT3 → CT4 → CT1 → CT2
 Day 4: CT4 → CT1 → CT2 → CT3
 Day 5: CT1 → CT2 → CT3 → CT4 (Repeat from Day 1).

This rotation ensures that each cooling tower takes turns as the first in sequence, then the second,
and so on. By rotating daily, each tower gets equal opportunity to operate first, which balances the
wear and tear.
14
Page
Weekly Alternation Logic (Alternating Every Week):
Alternatively, you could alternate the priority on a weekly basis to ensure equal distribution over a
longer period:
 Week 1: CT1 → CT2 → CT3 → CT4
 Week 2: CT2 → CT3 → CT4 → CT1
 Week 3: CT3 → CT4 → CT1 → CT2
 Week 4: CT4 → CT1 → CT2 → CT3
 (Repeat for following weeks)
This ensures each cooling tower operates at the top priority for a full week, and over a 4-week cycle,
each cooling tower will have had equal time in each sequence position.

Bypass Valve Sequence

The bypass valve operation is triggered when the building line pressure exceeds the warning pressure
setpoint configured in the BMS.
Bypass Valve Modulation:

The bypass valve will modulate open proportionally to relieve the excess pressure from the system.
The modulation is based on the pressure difference (measured by the DP sensor) between the supply
and return headers:
Greater Pressure Difference: Valve opens further.
Normal Pressure Difference: Valve modulates back to its default position.

Secondary Pump Ramp Down:

Simultaneously, the speed of the secondary pumps will be ramped down via the VFDs to reduce flow
and pressure in the building line.
The VFD speed control is guided by the PID controller based on the DP sensor feedback.

Sequence of Events:

Pressure Exceeds Warning Setpoint:

Bypass valve modulates open.
Secondary pump speed ramps down.

Pressure Returns to Normal:

Bypass valve modulates back to its default closed position.
Secondary pump speed ramps back up as needed.
15
Page
CPM Software

The 75F CPM software is based on the cloud platform. All the chiller data and analytics are
available on the cloud and the same can be viewed and controlled from the Facilisight
portal.
 Monitoring of chiller & field parameters
 Control of the pumps
 Alarms, events and notifications
 Reports & trends
 User administrations
CPM Monitoring of Chillers & Field Parameters
The CPM will provide a 3D layout of the chiller plant with all the monitoring and control
parameters.

CPM Control of Equipment

CPM can control all the equipments remotely with internet access. The CPM will provide you
with the automation of the chillers, pumps, fans and other various devices which are
integrated with the CPM panel.

Alarms & Events & Notifications

Custom alerting is possible in the 75F system, where it can send alert notifications through
email, SMS and desktop notification.

Reports & Trends

CPM stores all the relevant data in cloud storage through the CCU as a data aggregator. The
stored data can be visualized in the format of reports and trends.

User Administrator
The 75F system has an unlimited number of accesses for the facility team to monitor and
control.
16
Page
CPM Architecture

Water Cooled Chiller Architecture

17
Page
Master Controller with Slave - GA Drawing

Note: The panel GA may vary based on actual IO summary of the project

Controllers and Sensors Technical Literature:

18
Page
Controllers and Sensors Technical Literature

Sl No BOQ Description Model Selected Qty

1 Immersion Temperature Sensor (RTD) NTI225 – 300 mm 4
2 Outside Temp + RH Sensor NHO311T 1
3 Bi-Level switch for CT NCFWLS0 4
4 Pressure sensor for secondary pump VFD NWDPT1001100 1
control

75F-Chiller Plant Manager

Specification and Data Sheets

19
Page
GA DRAWING
TM

1150
220 1200

50 1050 50
TM

50
50MM PVC TRUNKING
INDICATOR
24 V D C 24 V D C 24 V DC 24 V D C 24 V D C 24 V D C 24 V D C 24 V D C 24 V D C 24 V DC 24 V D C SMPS-14A
RE L A Y RE L A Y RE L A Y RE L A Y RE LA Y RE L A Y RE L A Y RE L A Y RE L A Y RE L A Y RE LAY

160
50MM PVC TRUNKING
50MM PVC TRUNKING
LOCK

50
30
50MM PVC TRUNKING
CONTROLLER IO MODULE-01 IO MODULE-02 IO MODULE-03 IO MODULE-04 IO MODULE-05

U1 U2 U3 U4 U5 U6 U7 U8 G0 U9 U10 U11 U12 G0 U13 U14 U15 U16 G0 I1 I2 I3 I4 G0 SG - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I8 G0 I9 I10 I11 I12 G0 G0 - +
U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I8 G0 I9 I10 I11 I12 G0 G0 - +
ISMA-B-MAC36NL-RS MIX38-IP MIX38-IP MIX38-IP MIX38-IP MIX38-IP

108
SD-NL

U1 U2 U3 U4 U5 U6 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 I1 I2 I3 I4 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12
COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1
M A C 3 6 N L - RS M IX3 8 - IP M I X3 8 - IP M I X3 8 - IP M I X3 8 - IP M IX3 8 - IP
ETH1 ETH1 ETH1 ETH1 ETH1

31
RUN ALM ETH1 ETH2 COM2

A1 A2 A3 A4 A5 A6 A7 A8 O1 O2 O3 O4 O5 O6 O7 O8 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON

A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON

ETH1 ETH2 USB1 USB2 COM2 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1
HDMI ETH1
RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45
1000
1000

RJ45 RJ45 + - SG

950
80
80MM PVC TRUNKING

20
ISMA-B-MG-IP
IO MODULE-06 IO MODULE-07

DOUBLE TERMINALS FILTER

U1 U2 U3 U4 U5 G0 I1 I2 I3 I4 I5 G0 G0 -
+ M+ M+ M+ M- UNIVERSAL
POWER SOCKET
INPUTS DIGITAL INPUTS COM1

110
M-BUS

MIX18-IP

50MM PVC TRUNKING

20
C
-+

168

170

173

175
176

185

187

190

192
193
194
195

202

204

207

209
210
211
212
OM1 M-

139
140

142
143
144
145
146

148
149
150
151
152

154
155
156
157
158

160
161
162
163
164
165
166
167

169

171
172

174

177
178
179
180
181
182
183
184

186

188
189

191

196
197
198
199
200
201

203

205
206

208
141

147

153

159
LOCK
BUS
U1 U2 U3 U4 U5 I1 I2 I3 I4 I5 COM1
M I X 1 8 - IP COM1
M G - IP

80MM PVC TRUNKING

80
POWER
ANALOG OUTPUTS DIGITAL OUTPUTS
M-BUS
24V AC/DC

DOUBLE TERMINALS
DETAIL A

130
10

12
13
14
15

75
76
77
78
79
80
81
82
11

40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72

83
84
85
86
87

110

112
113
114
115
116
117
118
119
1
2
3
4
5
6
7
8
9

16
17
18
19

100
101
102
103
104
105
106
107
108
109

111

120

122
123
124
125
126
127
128
129
130

132
133
134
135
136
137
138
139
140

142
143
144
145
146

148
149
150
151
152

154
155
156
157
158

160
161
162
163
164
165
166
167
168
169
170
20

22
23
24
25
26
27
28
29
30

32
33
34
35
36
37
38
39

88
89
90
91
92
93

95
96
97
98
99

121

131

141

147

153

159
21

80
80MM PVC TRUNKING

SIDE VIEW ELEVATION INTERNAL MOUNTING

NOTES : DETAIL-A :

1200 -ALL DIMENSIONS ARE IN MM

-1NO OF CONTROLLER
-7NO OF IO MODULES
25MM HOLES FOR -11NO OF 24V DC 4-CHANNEL RELAY

220
CABLE ENTRY -0NO OF 24V DC SINGLE CHANNEL RELAY
-1NO OF 230V AC FILTER

WALL
-1NO OF SMPS (14A)
-DOUBLE TERMINAL BLOCKS TO BE PROVIDED
BOTTOM VIEW -OUTDOOR PANEL WITH DOUBLE DOOR CONSTRUCTION
-FLOOR MOUNT WITH STAND (REFER PG. 2)
-CAM LOCK SYSTEM - 2 NO's CLAMP
-PANEL SIZE : 1200(W) X 1000(H) X 220(D) PANEL MOUNTING
-MOUNTING PLATE SIZE :1150(W) X 950(H) X 3.0(THK) DETAIL WITH CLAMP

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 1 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

THIS DRAWING IS THE PROPERTY OF 75F SMART INNOVATION INDIA PVT LTD & MUST NOT BE PASSED ON TO ANY PERSON OR BODY NOT AUTHORIZED BY US TO RECEIVE IT NOR BE COPIED OR OTHERWISE MADE USE OF IN FULL OR IN PART BY SUCH PERSON OR BODY WITHOUT OUR PRIOR PERMISSION IN WRITING.
GA DRAWING (STAND)
TM

400
400
220 1200
220
CANOPY
CANOPY CANOPY

INDICATOR

LOCK

1000
1000

1000 LOCK

MOUNTING BASE
TO PREVENT DOOR
FROM JAMMING
20

20
20

500
500

500

FIXED FLOOR MOUNT

420
420

SIDE VIEW-01 ELEVATION SIDE VIEW-02

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 2 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

FROM
IO MODULE

G A+ B-

397 398 399

TO
INTEGRATIONS

CAT-6
INTERNET PROVISION

RS-485

UPS

SMPS:

COM-1
INPUT: 100-240VAC

COM-1

ETH-1

ETH-2

ETH-1

ETH-2

ETH-1
ETH-2

ETH-2

ETH-1
ETH-1

ETH-1

ETH-2
ETH-1

ETH-1
OUTPUT:24VDC
L N E

-V +V N L
IO MOD ULE- 01 IO MOD U LE- 02 IO MOD U LE-03 IO MOD ULE- 04 IO MOD U LE- 05 IO MOD ULE- 06 IO MOD U LE- 07

IP U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 U9 U10 U11 U12 G0 U13 U14 U15 U16 G0 I1 I2 I3 I4 G0 SG - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0 G0 - + U1 U2 U3 U4 U5 G0 I1 I2 I3 I4 I5 G0 G0 - +
M+ M+ M+ M- M- M-
UNIVER SAL INPUTS DIGI TAL INPUTS COM1 UNIVERSAL INPUTS DIGI TAL INPUTS COM1 UNIVERSAL INPUTS DIGI TAL INPUTS COM1 UNIVERSAL INPUTS DIGI TAL INPUTS COM1 UNIVERSAL INPUTS DIGI TAL INPUTS COM1 UNIVERSAL INPUTS DIGI TAL INPUTS COM1 UNIVERSAL INPUTS DIGITAL INPUTS COM1 M-BUS

RC ISMA-B-MAC36NL-RS MIX38-IP MIX38-IP MIX38-IP MIX38-IP MIX38-IP ISMA-B-MIX18 G0 - +

COM1
SD
-NL

U1 U2 U3 U4 U5 U6 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 I1 I2 I3 I4 COM1 U1 U2 U3 U4 U5 I1 I2 I3 I4 I5 COM1 M-BUS ISMA-B-MG-IP
U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1 U1 U2 U3 U4 U5 U6 U7 U8 I1 I2 I3 I4 I5 I6 I7 I8 I9 I10 I11 I12 COM1
C M AC3 6 NL - RS M I X3 8 - IP M I X3 8 - IP M I X3 8 - IP M I X3 8 - IP M I X3 8 - IP M IX1 8 - IP COM1 M G-IP

RS-485
ETH1 ETH1 ETH1 ETH1 ETH1 ETH1
ON
RUN ALM ETH1 ETH2 COM2 ETH1

A1 A2 A3 A4 A5 A6 A7 A8 O1 O2 O3 O4 O5 O6 O7 O8 ON
A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 A5 A6 O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 O11O12 ON A1 A2 A3 A4 O1 O2 O3 O4 ON ALM

TO CONNECT
MODULE
ETH1 ETH2 USB1 USB2 COM2 PO WER
ETH1 ETH1 ETH1
HDMI ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 ETH1 24V AC/DC
GND RJ45 RJ45 + - SG
RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 RJ45 G G0

A+
USB

ANALOG OUTPUTS DIGITAL OUTPUTS M-BUS

24V ANALOG OUTPUTS DIGI TAL OUTPUTS POW ANALOG OUTPUTS DIGI TAL OUTPUTS POW ANALO G OUTPUTS DIGI TAL OUTPUTS POW ANALO G OUTPUTS DIGI TAL OUTPUTS POW ANALOG OUTPUTS DIGI TAL OUTPUTS POW ANALOG OUTPUTS DIGITAL OUTPUTS
POWER
POWER M- M- M- M+ M+ M+
B- A1 A2 G0 A3 A4 G0 A5 A6 G0 A7 A8 G0 O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 G G0 ER ER ER ER ER
24V
24V 24V 24V 24V 24V

AC/D AC/D AC/D AC/D AC/D

C C C C C

A1 A2 A3 G0 A4 A5 A6 G0 O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 G G0 A1 A2 A3 G0 A4 A5 A6 G0 O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 G G0 A1 A2 A3 G0 A4 A5 A6 G0 O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 G G0 A1 A2 A3 G0 A4 A5 A6 G0 O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 G G0 A1 A2 A3 G0 A4 A5 A6 G0 O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 G G0 A1 A2 G0 A3 A4 G0 O1 O2 C1 O3 O4 C2 G G0

CCU
USB-RS485
+ - + - + - + - + - + - + - + -
24V DC
FROM SMPS

RS-485
CENTRAL CONTROL UNIT RS-485 RS-485

FROM
CONTROLLER

PUMP CT
G A+ B- WCC-01 WCC-02 WCC-03
VFD VFD
394 395 396

INTEGRATIONS

TO
CCU

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 3 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

Fuse

230P
P 230V AC Power Supply
230N

Lamp FUSE
+
SMPS TO TERMINAL BLOCK (POWER
24VDC SUPPLY FOR CONROLLERS
(14AMPS)
- AND IO MODULES)
N
FUSE
L +
TO TERMINAL BLOCK (POWER
To Power N 24VDC
Socket E - SUPPLY FOR FIELD DEVICES)
FUSE
P
230VAC 1 TO TERMINAL BLOCK (POWER
IN 230VAC
MCB SUPPLY FOR VALVE ACTUATORS)
NEUTRAL 2 N

Filter EARTH 3 PE

230VAC 4
OUT
NEUT 5
L N E

FUSE

FUSE
DO AO UI DI RS-485 SPARE

230N

230N
230N

230N

24V+
POWER SUPPLY FOR 230P

POWER SUPPLY FOR 230P

24V-
POWER SUPPLY FOR 24V+

FIELD DEVICES 24V-

01-104 105-132 133-255 256-393 394-399 400-420
L N E

CONTROLLERS AND IO MODULE

VALVE ACTUATORS

VALVE ACTUATORS
VALVE ACTUATORS

VALVE ACTUATORS

POWER SUPPLY FOR

POWER SUPPLY FROM UPS
(CLIENT SCOPE)
230V AC / 1PH / 50Hz

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 4 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

DIGITAL OUTPUT ANALOG OUTPUT

O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 A1 A2 G0 A3 A4 G0 A5 A6 G0 A7 A8 G0
24V DC RELAY-01

24V DC RELAY-02
R1 R2 R3 R4 24V R1 R2 R3 R4 24V
105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120

GND

GND
GND

GND

GND
GND

GND

CT-02 FAN-02 VFD SPEED CONTROL

CT-01 FAN-01 VFD SPEED CONTROL

CT-02 FAN-01 VFD SPEED CONTROL

CT-01 FAN-02 VFD SPEED CONTROL
SECONDARY PUMP-02 VFD SPEED CONTROL

SECONDARY PUMP-04 VFD SPEED CONTROL

SECONDARY PUMP-03 VFD SPEED CONTROL
SECONDARY PUMP-01 VFD SPEED CONTROL
+ -
24V DC
POWER SUPPLY
1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC

01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16 17 18 19 20
GND
GND
GND
GND

WCC-02 ON/OFF COMMAND

WCC-04 ON/OFF COMMAND

WCC-01 ON/OFF COMMAND

WCC-03 ON/OFF COMMAND

GND

GND
WCC-02 EVAPORATOR VALVE CLOSE COMMAND
WCC-01 EVAPORATOR VALVE CLOSE COMMAND

WCC-02 EVAPORATOR VALVE OPEN COMMAND

WCC-02 CONDENSER VALVE OPEN COMMAND

WCC-01 CONDENSER VALVE OPEN COMMAND
WCC-01 EVAPORATOR VALVE OPEN COMMAND

WCC-02 CONDENSER VALVE CLOSE COMMAND

WCC-01 CONDENSER VALVE CLOSE COMMAND

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 5 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

UNIVERSAL INPUT DIGITAL INPUT

U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 U9 U10 U11 U12 G0 U13 U14 U15 U16 G0 I1 I2 I3 I4 G0

133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 256 257 258 259 260 261 262 263

GND
GND
GND

GND
GND

GND

GND
GND

GND

GND
COMMON CHILLED WATER SUPPLY HEADER TEMPERATURE

GND

SECONDARY PUMP-04 TRIP STATUS

SECONDARY PUMP-4 AUTO/MANUAL STATUS
COMMON CHILLED WATER RETURN HEADER TEMPERATURE

CT-01 FAN-01 VFD SPEED FEEDBACK

CT-01 FAN-02 VFD SPEED FEEDBACK

CT-02 FAN-01 VFD SPEED FEEDBACK

CT-02 FAN-02 VFD SPEED FEEDBACK

CT-03 FAN-01 VFD SPEED FEEDBACK

PWR

COMMON CONDENSER WATER SUPPLY HEADER TEMPERATURE

PWR

CONDENSER PUMP-01 AUTO/MANUAL STATUS

AMBIENT TEMP. SENSOR

CONDENSER PUMP-01 RUN STATUS

AMBIENT RH SENSOR

WATER DIFFERENTIAL PRESSURE SENSOR ACROSS CHW HEADERS

COMMON CONDENSER WATER RETURN HEADER TEMPERATURE

SECONDARY PUMP-03 VFD FEEDBACK

SECONDARY PUMP-04 VFD FEEDBACK

SECONDARY PUMP-01 VFD FEEDBACK

SECONDARY PUMP-02 VFD FEEDBACK

+
-

24V DC
POWER SUPPLY

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 6 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

DIGITAL OUTPUT ANALOG OUTPUT

O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 A1 A2 A3 G0 A4 A5 A6 G0

121 122 123 124 125 126 127 128 129 130 131 132

24V DC RELAY-04
24V DC RELAY-03

24V DC RELAY-05

GND
GND
GND
GND

GND

GND
SPARE-AO

SPARE-AO
CT-03 FAN-01 VFD SPEED CONTROL

CT-04 FAN-01 VFD SPEED CONTROL

CT-03 FAN-02 VFD SPEED CONTROL

CT-04 FAN-02 VFD SPEED CONTROL

R1 R2 R3 R4 24V R1 R2 R3 R4 24V R1 R2 R3 R4 24V

+ -
24V DC
POWER
1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC SUPPLY

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
GND

GND
GND

GND

GND
GND

GND

GND
CT-02 INLET VALVE CLOSE COMMAND
CT-01 INLET VALVE CLOSE COMMAND

CT-01 OUTLET VALVE CLOSE COMMAND

CT-02 INLET VALVE OPEN COMMAND

CT-01 INLET VALVE OPEN COMMAND

CT-01 OUTLET VALVE OPEN COMMAND

WCC-04 EVAPORATOR VALVE CLOSE COMMAND
WCC-03 EVAPORATOR VALVE CLOSE COMMAND
WCC-03 EVAPORATOR VALVE OPEN COMMAND

WCC-04 EVAPORATOR VALVE OPEN COMMAND

WCC-04 CONDENSER VALVE OPEN COMMAND

WCC-03 CONDENSER VALVE OPEN COMMAND

CT-03 INLET VALVE CLOSE COMMAND

CT-02 OUTLET VALVE CLOSE COMMAND

CT-04 INLET VALVE OPEN COMMAND

CT-04 INLET VALVE CLOSE COMMAND

CT-04 OUTLET VALVE CLOSE COMMAND

CT-03 INLET VALVE OPEN COMMAND

CT-03 OUTLET VALVE CLOSE COMMAND

CT-04 OUTLET VALVE OPEN COMMAND

CT-03 OUTLET VALVE OPEN COMMAND
CT-02 OUTLET VALVE OPEN COMMAND
WCC-04 CONDENSER VALVE CLOSE COMMAND
WCC-03 CONDENSER VALVE CLOSE COMMAND

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 7 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

UNIVERSAL INPUT DIGITAL INPUT

U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0

166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287
CT-04 FAN-02 VFD SPEED FEEDBACK
CT-03 FAN-02 VFD SPEED FEEDBACK

WCC-01 EVAPORATOR VALVE OPEN/CLOSE STATUS

CT-04 FAN-01 VFD SPEED FEEDBACK

CONDENSER PUMP-03 TRIP STATUS

CONDENSER PUMP-04 TRIP STATUS

CONDENSER PUMP-02 RUN STATUS

CONDENSER PUMP-03 RUN STATUS

CONDENSER PUMP-04 RUN STATUS

GND

GND
GND
GND

GND

CONDENSER PUMP-03 AUTO/MANUAL STATUS

CONDENSER PUMP-04 AUTO/MANUAL STATUS

GND

WCC-01 CONDENSER VALVE OPEN/CLOSE STATUS

CONDENSER PUMP-02 TRIP STATUS

CONDENSER PUMP-01 TRIP STATUS

CONDENSER PUMP-02 AUTO/MANUAL STATUS

WCC-01 RUN STATUS

WCC-01 TRIP STATUS

WCC-01 AUTO/MANUAL STATUS

CT-01 FAN-01 AUTO/MANUAL STATUS

CT-01 FAN-01 RUN STATUS
GND
GND

GND

GND
GND

GND

GND
PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 8 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

DIGITAL OUTPUT ANALOG OUTPUT

O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 A1 A2 A3 G0 A4 A5 A6 G0

SPARE IO POINTS

24V DC RELAY-07
24V DC RELAY-06

24V DC RELAY-08
R1 R2 R3 R4 24V R1 R2 R3 R4 24V R1 R2 R3 R4 24V

+ -
24V DC
POWER
1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC SUPPLY

57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80

SECONDARY PUMP-01 ON/OFF COMMAND

SECONDARY PUMP-02 ON/OFF COMMAND

GND

GND
GND

GND

SECONDARY PUMP-03 ON/OFF COMMAND

SECONDARY PUMP-04 ON/OFF COMMAND

GND

GND
GND

GND

CONDENSER PUMP-04 ON/OFF COMMAND

GND
CONDENSER PUMP-02 ON/OFF COMMAND
CONDENSER PUMP-01 ON/OFF COMMAND

CONDENSER PUMP-03 ON/OFF COMMAND

PRIMARY PUMP-02 ON/OFF COMMAND

PRIMARY PUMP-04 ON/OFF COMMAND

PRIMARY PUMP-03 ON/OFF COMMAND
PRIMARY PUMP-01 ON/OFF COMMAND

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 9 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

UNIVERSAL INPUT DIGITAL INPUT

U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0

182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311

WCC-02 EVAPORATOR VALVE OPEN/CLOSE STATUS

CT-03 FAN-01 AUTO/MANUAL STATUS

WCC-03 RUN STATUS

CT-02 FAN-01 TRIP STATUS

WCC-02 RUN STATUS

CT-02 FAN-01 AUTO/MANUAL STATUS

WCC-02 TRIP STATUS

WCC-02 CONDENSER VALVE OPEN/CLOSE STATUS

WCC-03 TRIP STATUS

WCC-03 AUTO/MANUAL STATUS
WCC-02 AUTO/MANUAL STATUS

GND

GND
GND
GND

GND
GND

CT-03 FAN-01 RUN STATUS

CT-02 FAN-01 RUN STATUS

CT-02 FAN-02 TRIP STATUS

CT-01 FAN-01 TRIP STATUS

CT-01 FAN-02 TRIP STATUS

CT-02 FAN-02 AUTO/MANUAL STATUS

CT-01 FAN-02 AUTO/MANUAL STATUS

CT-02 FAN-02 RUN STATUS

CT-01 FAN-02 RUN STATUS
GND

GND

GND
GND

GND

GND
GND
GND

GND

GND
PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 10 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

DIGITAL OUTPUT ANALOG OUTPUT

O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 A1 A2 A3 G0 A4 A5 A6 G0

SPARE IO POINTS

24V DC RELAY-10
24V DC RELAY-09

24V DC RELAY-11
R1 R2 R3 R4 24V R1 R2 R3 R4 24V R1 R2 R3 R4 24V

+ -
24V DC
POWER
1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC 1NO 1C 1NC 2NO 2C 2NC 3NO 3C 3NC 4NO 4C 4NC SUPPLY

81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104

CT-02 FAN-01 ON/OFF COMMAND
GND

CT-02 FAN-02 ON/OFF COMMAND

GND
CT-01 FAN-01 ON/OFF COMMAND
GND

CT-01 FAN-02 ON/OFF COMMAND

GND

SPARE DO
SPARE DO

SPARE DO
SPARE DO
CT-03 FAN-01 ON/OFF COMMAND
GND

CT-03 FAN-02 ON/OFF COMMAND

GND

CT-04 FAN-01 ON/OFF COMMAND

GND

CT-04 FAN-02 ON/OFF COMMAND

GND

GND
GND

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road

LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 11 OF 17 Village Varthur Uttarahalli Hobli,
Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

UNIVERSAL INPUT DIGITAL INPUT

U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0

198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335
WCC-04 RUN STATUS

WCC-04 TRIP STATUS

CT-04 FAN-01 AUTO/MANUAL STATUS

WCC-04 AUTO/MANUAL STATUS
WCC-03 EVAPORATOR VALVE OPEN/CLOSE STATUS

WCC-04 EVAPORATOR VALVE OPEN/CLOSE STATUS

GND

GND
GND

GND
GND
WCC-03 CONDENSER VALVE OPEN/CLOSE STATUS

CT-04 FAN-01 RUN STATUS

WCC-04 CONDENSER VALVE OPEN/CLOSE STATUS

PRIMARY PUMP-01 RUN STATUS

CT-01 OUTLET VALVE OPEN/CLOSE STATUS

CT-01 INLET VALVE OPEN/CLOSE STATUS
CT-03 FAN-02 TRIP STATUS
CT-03 FAN-01 TRIP STATUS

CT-04 FAN-02 AUTO/MANUAL STATUS

CT-03 FAN-02 AUTO/MANUAL STATUS

CT-04 FAN-01 TRIP STATUS

CT-04 FAN-02 TRIP STATUS

CT-04 FAN-02 RUN STATUS
CT-03 FAN-02 RUN STATUS

GND
GND

GND

GND
GND

GND
GND
PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 12 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

DIGITAL OUTPUT ANALOG OUTPUT

O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 A1 A2 A3 G0 A4 A5 A6 G0

SPARE IO POINTS SPARE IO POINTS

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 13 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

UNIVERSAL INPUT DIGITAL INPUT

U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0

214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359

GND

CT-03 LEVEL SWITCH-LO

CT-01 LEVEL SWITCH-LO
GND

GND

GND
GND
GND

GND

GND
GND
PRIMARY PUMP-01 TRIP STATUS

GND
PRIMARY PUMP-03 RUN STATUS
PRIMARY PUMP-02 AUTO/MANUAL STATUS
PRIMARY PUMP-01 AUTO/MANUAL STATUS

CT-01 LEVEL SWITCH-HI

CT-03 LEVEL SWITCH-HI

PWR

PWR
PRIMARY PUMP-02 RUN STATUS

CT-02 INLET VALVE OPEN/CLOSE STATUS

CT-03 INLET VALVE OPEN/CLOSE STATUS

CT-02 OUTLET VALVE OPEN/CLOSE STATUS

CT-04 INLET VALVE OPEN/CLOSE STATUS

CT-02 LEVEL SWITCH-LO

CT-03 OUTLET VALVE OPEN/CLOSE STATUS

CT-04 OUTLET VALVE OPEN/CLOSE STATUS

PRIMARY PUMP-02 TRIP STATUS

PRIMARY PUMP-03 TRIP STATUS

PRIMARY PUMP-03 AUTO/MANUAL STATUS

CT-02 LEVEL SWITCH-HI

GND

GND
GND

GND

+
-
24V DC
POWER SUPPLY

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 14 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

DIGITAL OUTPUT ANALOG OUTPUT

O1 O2 C1 O3 O4 C2 O5 O6 C3 O7 O8 C4 O9 O10 C5 O11 O12 C6 A1 A2 A3 G0 A4 A5 A6 G0

SPARE IO POINTS SPARE IO POINTS

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 15 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

UNIVERSAL INPUT DIGITAL INPUT

U1 U2 U3 U4 G0 U5 U6 U7 U8 G0 I1 I2 I3 I4 G0 I5 I6 I7 I8 G0 I9 I10 I11 I12 G0

230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383

GND
SECONDARY PUMP-01 AUTO/MANUAL STATUS

CT-04 LEVEL SWITCH-LO

SECONDARY PUMP-02 RUN STATUS
GND

GND

GND
GND

GND

GND
GND

SECONDARY PUMP-01 TRIP STATUS

PRIMARY PUMP-04 RUN STATUS

PWR

CT-04 LEVEL SWITCH-HI

SECONDARY PUMP-01 RUN STATUS

SECONDARY PUMP-2 AUTO/MANUAL STATUS

PRIMARY PUMP-04 TRIP STATUS
PRIMARY PUMP-04 AUTO/MANUAL STATUS

SPARE DI

SPARE DI
SPARE DI

SPARE DI
SPARE DI
SPARE DI

SPARE DI

SPARE DI
GND

GND
GND

GND

GND
GND
GND

GND
+
-
24V DC
POWER SUPPLY

PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 16 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

ANALOG OUTPUT DIGITAL INPUT

DIGITAL OUTPUT UNIVERSAL INPUT

O1 O2 C1 O3 O4 C2 A1 A2 G0 A3 A4 G0 U1 U2 U3 U4 U5 G0 I1 I2 I3 I4 I5 G0

SPARE IO POINTS SPARE IO POINTS

246 247 248 249 250 251 252 253 254 255 384 385 386 387 388 389 390 391 392 393

GND

GND
GND

SECONDARY PUMP-03 TRIP STATUS

SECONDARY PUMP-02 TRIP STATUS

SECONDARY PUMP-03 RUN STATUS

SECONDARY PUMP-04 RUN STATUS

SECONDARY PUMP-3 AUTO/MANUAL STATUS

GND
GND

GND

SPARE DI
SPARE DI

SPARE DI

SPARE DI
PROJECT ODISHA HOSPITAL & MEDICAL COLLEGE, PHULBANI DWG NO 75F-PHULBANI- CPM-001
TM

CLIENT -- PREPARED AV CHECKED NKS REV R0

75F Smart Innovations India Pvt Ltd
WeWork Vaishnavi Signature,
No. 78/9, 4th Floor, Outer Ring Road
Village Varthur Uttarahalli Hobli,
LOCATION PLANT ROOM PANEL NO CPM PANEL DATE 24.12.2024 PG. 17 OF 17 Bellandur,Bengaluru-560103
www.75f.io ,Toll free-1800 121 4575

75F APAC
Toll Free : 18001214575
Website : www.75f.io
Email : [email protected]

ODISHA HOSPITAL & MEDICAL COLLEGE-PHULBANI

CHILLER PLANT MANAGER PANEL

3
System specifications
NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your
computer. For more information about the configuration of your computer, go to Help and Support in your Windows
operating system and select the option to view information about your computer.

Topics:
• Processor
• Memory
• Storage
• Chipset
• Storage combinations
• Audio
• Video
• Communications
• Ports and connectors
• System board connectors
• Power supply
• Physical system dimensions
• Security
• Environmental

Processor
Global Standard Products (GSP) are a subset of Dell’s relationship products that are managed for availability and synchronized
transitions on a worldwide basis. They ensure the same platform is available for purchase globally. This allows customers to
reduce the number of configurations managed on a worldwide basis, thereby reducing their costs. They also enable companies
to implement global IT standards by locking in specific product configurations worldwide. The following GSP processors
identified below will be made available to Dell customers.
NOTE: Processor numbers are not a measure of performance. Processor availability is subject to change and may vary by
region/country.

Table 2. Processor specifications

Type UMA Graphics

Intel Pentium Gold G5400 (2 Cores/4MB/4T/3.7GHz/65W); Intel UHD Graphics 610 with shared graphics memory
supports Windows 10/Linux

Intel Pentium Gold G5500 (2 Cores/4MB/4T/3.8GHz/65W); Intel UHD Graphics 610 with shared graphics memory
supports Windows 10/Linux

Intel Core i3-8100 (4 Cores/6MB/4T/3.6GHz/65W); supports Intel UHD Graphics 630

Windows 10/Linux

Intel Core i3-8300 (4 Cores/8MB/4T/3.7GHz/65W); Intel UHD Graphics 630

supports Windows 10/Linux

Intel Core i5-8400 (6 Cores/9MB/6T/up to 4.0GHz/65W); Intel UHD Graphics 630

supports Windows 10/Linux

10 System specifications
Table 2. Processor specifications (continued)
Type UMA Graphics

Intel Core i5-8500 (6 Cores/9MB/6T/up to 4.1GHz/65W); Intel UHD Graphics 630

supports Windows 10/Linux

Intel Core i5-8600 (6 Cores/9MB/6T/up to 4.3GHz/65W); Intel UHD Graphics 630

supports Windows 10/Linux

Intel Core i7-8700 (6 Cores/12MB/12T/up to 4.6GHz/65W); Intel UHD Graphics 630

supports Windows 10/Linux

Memory
Table 3. Memory specifications
Detail Specification

Minimum memory configuration 4 GB

Maximum memory configuration 64 GB

Number of slots 4 UDIMM

Maximum memory supported per slot 16 GB

Memory options ● 4 GB - 1 x 4 GB
● 8 GB - 1 x 8 GB
● 8 GB - 2 x 4 GB
● 16 GB - 2 x 8 GB
● 16 GB - 1 x 16 GB
● 32 GB - 2 x 16 GB
● 32 GB - 4 x 8 GB
● 64 GB - 4 x 16 GB

Type DDR4 DRAM Non-ECC memory

Speed ● 2666 MHz on i5 and i7 processors

● 2400 MHz on Celeron, Pentium, and i3 processor

Storage
Table 4. Storage specifications

Type Form factor Interface Capacity

One Solid-State Drive (SSD) M.2 2280 ● SATA Class 20 Solid State ● Upto 512 GB
HDD Drive ● Upto 1 TB
● PCIe Class 40 Solid State ● Upto 512 GB
Drive ● Upto 512 GB
● PCIe NVMe Class 40 Solid ● Upto 256 GB
State Drive
● Upto 512 GB
● SATA Class 20 Self
Encrypting Opal 2.0 Solid
State Drive

System specifications 11
Table 4. Storage specifications (continued)
Type Form factor Interface Capacity

● PCIe NVMe Class 40 Self

Encrypting Opal 2.0 Solid
State Drive
● Class 20 Self Encrypting
Opal 2.0 Solid State Drive

One 3.5 inch Drive SATA 3.0, Up to 6 Gbps Up to 2 TB, upto 7200 RPM
One 2.5 inch Hard-Disk Drive ● SATA 5400 RPM Hard ● Upto 2 TB
(HDD) Disk Drive ● Upto 1 TB
● SATA 5400 RPM 8GB ● Upto 1 TB
NAND Hybrid Hard Disk
Drive
● SATA 7200 RPM Hard
Disk Drive
One 2.5 inch Self-encrypting 7200 RPM FIPS Self Upto 500 GB
Opal drive Hard-Disk Drive Encrypting Opal 2.0 Hard Disk
(SED HDD) Drive

Chipset
Table 5. Chipset specifications
Detail Specification

Type Intel Q370

Non-volatile memory on chipset Yes

BIOS configuration SPI (Serial Peripheral Interface) 256 Mbit (32 MB) located at SPI_FLASH on chipset

Trusted Platform Module (TPM) 2.0 Security Device (Discrete 24 KB located at TPM 2.0 on chipset
TPM Enabled)

Firmware-TPM (Discrete TPM disabled) By default the Platform Trust Technology feature is visible to
the OS

NIC EEPROM LOM configuration contained within SPI flash ROM.

Storage combinations
Table 6. Storage combinations
Primary/Boot drive Specifications

1 x 2.5 inch HDD with M.2 Optane 2.5 500 GB 7200 RPM HDD + Intel Optane Memory
1 x 2.5 inch HDD with M.2 Optane 2.5 1 TB 7200 RPM HDD + Intel Optane Memory
1 x 2.5 inch HDD with M.2 Optane 2.5 2 TB 5400 RPM HDD + Intel Optane Memory
1 x 3.5 inch HDD with M.2 Optane 3.5 500 GB 7200 RPM HDD + Intel Optane Memory
1 x 3.5 inch HDD with M.2 Optane 3.5 1 TB 7200 RPM HDD + Intel Optane Memory
1 x 3.5 inch HDD with M.2 Optane 3.5 2 TB 7200 RPM HDD + Intel Optane Memory

12 System specifications
Audio
Table 7. Audio specifications
Detail Specification

Controller Realtek ALC3234

Type Integrated

Speakers Internal speaker (mono)

Interface ● Headset port/Universal audio jack port (Front)

Lineout port (Front)

Internal speaker amplifier 2W (RMS) per channel

Video
Table 8. Video
Controller Type CPU Graphics Capacity External Number of Maximum resolution
Dependency memory display display
type support supported

Intel UHD UMA Intel Pentium Integrated Shared DisplayPort 1.2 3 Max display resolution.
Graphics Gold G5400 system
HDMI 2.0 MB integrated
610 memory
Intel Pentium
DP1.2:
Gold G5500
4096x2304@60Hz
Option module:
VGA:
1920x1080@60Hz
DP1.2:
4096x2304@60Hz
HDMI2.0:
4096x2160@60Hz

Intel UHD UMA Intel Core Integrated Shared DisplayPort 1.2 3 VGA: 1920x1200@60
Graphics i3-8100 system Hz
HDMI 2.0
630 memory
Intel Core DisplayPort:
i3-8300 4096x2160@60 Hz
Intel Core HDMI : 2560x1600;
i5-8400 4096x2160@60 Hz
Intel Core
i5-8500
Intel Core
i7-8700

Discrete Graphics
2 GB AMD Optional Optional Not available
Radeon R5
430
2 GB Optional Optional Not available
NVIDIA

System specifications 13
Table 8. Video (continued)
Controller Type CPU Graphics Capacity External Number of Maximum resolution
Dependency memory display display
type support supported

GeForce GT
730
2 GB Optional Optional Not available
NVIDIA
GeForce GT
730
2 GB Dual Optional Optional Not available
AMD
Radeon R5
430
2 GB Dual Optional Not available Not available
AMD
Radeon R5
430

Communications
Table 9. Communications

Network adapter Intel i219-V Gigabit Ethernet LAN 10/100/1000 (Remote Wake
Up, PXE support)

Wireless ● Qualcomm QCA9377 Dual-band 1x1 802.11ac Wireless with

MU-MIMO + Bluetooth 4.1; 2.4 Ghz - 5 Ghz
● Qualcomm QCA61x4A Dual-band 2x2 802.11ac Wireless
with MU-MIMO + Bluetooth 4.2; 2.4 Ghz - 5 Ghz
● Intel Wireless-AC 9560, Dual-band 2x2 802.11ac Wi-Fi with
MU-MIMO + Bluetooth 5; 2.4 Ghz - 5 Ghz

Ports and connectors

Table 10. Ports and connectors

Memory card reader SD 4.0 memory card reader—optional

USB ● Two USB 2.0 (SmartPower On) ports

● Five USB 3.1 Gen 1 ports
● One USB 2.0 port
● One USB 2.0 PowerShare (2A max) port
● One USB 3.1 Gen 2 Type-C with PowerShare port

Security Kensington lock slot

Audio ● Universal audio jack

● One line-out port
● Noise reduction array microphones

Video ● Two DisplayPorts

14 System specifications
Table 10. Ports and connectors (continued)

● HDMI 2.0, DP, VGA, USB Type-C (with DP Alt Mode)—

optional

Network adapter One RJ-45 (10/100/1000) connector

System board connectors

Table 11. System board connectors

M.2 Connectors 1 - 2230/2280 (Support SATA & PCIe interface)

M.2 Connectors 1 - 2230 (keyed to support Integrated or Discrete WiFi,
Support Intel CNVi or USB2.0/PCIe)

Serial ATA (SATA) connector 4 (one Gen2 port for ODD and the rest of the ports support
Gen3)

PCIe X16 slot 1(Support Standard Rev 3.0)

PCIe X1 slot 2

PCIe X16 slot (wired x4) slot 1 (Support Standard Rev 3.0)

Power supply
Table 12. Power supply

Input Voltage 100-240 V, 3.2 A, 50-60 Hz

Input current (maximum) ● 260 W PSU (EPA Bronze)

● 260 W PSU (EPA Platinum)

Physical system dimensions

Table 13. Physical system dimensions

Chassis volume (liters) 14.77

Chassis weight (pounds / kilograms) 17.49 / 7.93

Table 14. Chassis dimensions

Height (inches / centimeters) 13.8 / 35

Width (inches / centimeters) 6.10 / 15.40

Depth (inches / centimeters) 10.80 / 27.40

Shipping weight (pounds / kilograms – includes packaging 20.96 / 9.43

materials)

System specifications 15
Table 15. Packaging parameters

Height (inches / centimeters) 13.19 / 33.50

Width (inches / centimeters) 19.40 / 49.40

Depth (inches / centimeters) 15.50 / 39.40

Security
Table 16. Security
Security Types Tower/ Small form factor/ Micro
Trusted Platform Module (TPM)
2.01,2 Integrated on system board

Firmware TPM Optional

Windows Hello support Optional via security input device
Cable Cover Optional
Chassis Intrusion Switch Optional /Optional /Standard
Dell Smartcard Keyboard Optional
Chassis lock slot and loop
Standard
support

1 TPM 2.0 is FIPS 140-2 certified.

2 TPM is not available in all countries.

Environmental
NOTE: For more details on Dell environmental features, please go to the environmental attributes section. See your specific
region for availability.

Table 17. Environmental

Energy efficient power supply Optional

80 plus bronze certification 260 W EPA bronze

80 plus platinum certification 260 W EPA bronze

Customer replaceable unit No

Recyclable packaging Yes

MultiPack packaging Optional, US only

Operating Requirements Non-Operating Requirements

Temperature Ranges 10 to 35°C (50 to 95°F) -40 to 65°C (-40 to 149°F)
Temperature Gradient Maximum 10°C (18°F) 20°C (36°F)
per 60 Min
Humidity Percent Ranges 20 to 80%* (*Max dew point 5 to 95%+ (+Max dew point temperature = 33°C)
Noncondensing temperature = 26°C)

16 System specifications
D E LL 2 2 M O NI T O R S - E 2 2 25 H , E 2 2 25 H S D E LL 2 2 M O NI T O R S - E 2 2 25 H , E 2 2 25 H S D E LL 2 2 M O NI T O R S - E 2 2 25 H , E 2 2 25 H S

FEATURE TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION

Ports & Slots

MODEL Dell 22 Monitor - E2225H Dell 22 Monitor - E2225HS

DIAGONAL 544.85mm(21.45in.) 544.85 mm (21.45 in.)

VIEWINGSIZE

PANELTYPE Vertical Alignment (VA) Technology Vertical Alignment (VA) Technology

MAXIMUMPRESET 1920x 1080upto 75Hz 1920 x 1080 up to 75 Hz
RESOLUTIONAND
REFRESH RATE

VIEWINGANGLE 178° vertical 178° vertical

178° horizontal 178° horizontal

E2225H PIXEL PITCH 0.2493 mm x 0.2410 mm 0.2493 mm x 0.2410 mm

PIXEL PER INCH (PPI) 103 103

CONTRAST RATIO 3000:1 (typical) 3000:1 (typical)

ASPECT RATIO 16:9 16:9

BACKLIGHT LEDEdgelightSystem LED Edgelight System

TECHNOLOGY

BRIGHTNESS 250 cd/m² (typical) 250 cd/m² (typical)

RESPONSE TIME • 5 milliseconds (gray to gray - fast mode) • 5 milliseconds (gray to gray - fast mode)
• 8 milliseconds (gray to gray - normal mode) • 8 milliseconds (gray to gray - normal mode)

COLOR GAMUT NTSC minimum 72% (CIE 1931), NTSC minimum 83% (CIE 1976) NTSC minimum 72% (CIE 1931), NTSC minimum 83% (CIE 1976)
1 2 3 5
COLOR DEPTH 16.7 Million colors 16.7 Million colors

TÜVRHEINLAND 3- Stars 3-Stars

EYE COMFORT

E2225 CONNECTIVITY • One DisplayPort 1.2 (HDCP 1.4) (supports up to FHD 1920 x 1080 75 Hz) • One HDMI (HDCP 1.4)(supports uptoFHD1920 x 108075 Hzas per
E2225HS • One VGA connector specified in HDMI1.4)
• One DisplayPort 1.2 (HDCP 1.4) (supports up to FHD 1920 x 1080 75 Hz)
• One VGA connector

ADJUSTABILITY Tilt -5°/+21° • Height adjustable stand

Dell Display
• Height adjustment up to 100 mm
• Tilt -5°/+21°
DISPLAY SCREEN Anti-glarewithhard-coating3H Anti-glare with hard-coating 3H
COATING

Manager 6 1 2 3 4 5 6 SOFTWARE Dell Display Manager (DDM) for Windows operating system Dell Display Manager (DDM) for Windows operating system
COMPATIBILITY

VOLTAGE REQUIRED 100VACto 240VAC / 50 Hzor 60 Hz ± 3 Hz / 0.7 A (typical) 100VACto 240VAC/ 50Hzor 60Hz± 3 Hz / 0.7A (typical)

POWER • 0.3W (Off mode)1 • 0.3 W (Off mode)1

CONSUMPTION • 0.3 W (Standby mode)1 • 0.3 W (Standby mode)1
Boost efficiency with features that let you organize your screen, customize your monitor settings • 11.9 W (On mode)1
•
•
11.5 W (On mode)1
21 W (Max)2

and simplify management. • 19W (Max)2

• 12.3 W (Pon)3
•
•
11.5 W (Pon)3
36.9 kWh (TEC)3

• 39.3 kWh (TEC)3

HEIGHT WITH STAND 384.17 mm (15.12 in.) (Compressed ~ Extended) 354.17 mm (13.94 in.) - 454.17 mm (17.88 in.)

WIDTH WITH STAND 504.26 mm (19.85 in.) 504.26 mm (19.85 in.)

1
DEPTH WITH STAND 171.00 mm (6.73 in.) 200.39 mm (7.89 in.)
Security lock slot1
HEIGHT WITHOUT 295.38 mm (11.63 in.) 295.38 mm (11.63 in.)

Multitask efficiently Easy management Customize to your convenience 2 Power connector STAND

3
WIDTH WITHOUT 504.26mm(19.85in.) 504.26 mm (19.85 in.)
DisplayPort STAND

Organize your screen with Manage your fleet of monitors with Quickly access your favorite features 4 HDMI (available with the Dell E2225HS monitor only) DEPTH WITHOUT 49.64 mm (1.95 in.) 49.64 mm (1.95 in.)
STAND
Easy Arrange and save profiles with remote management features that and functions with the menu launcher 5 VGA
Easy Arrange Memory. are automatic, and compatible with and hot keys.
6 Built-in speakers
several tools.1

Cables included
• Power cable
Download Dell Display Manager • DisplayPort cable with the Dell E2225H monitor only
• HDMI cable with the Dell E2225HS monitor only

1 As defined in EU 2019/2021 and EU 2019/2013.

2 Max brightnessand contrastsetting.
1 Tools including SCCM/InTune and Command Line Interface scripts. 1 Based on Kensington SecuritySlot™ 3 Pon: Powerconsumption of On mode as defined in EnergyStar 8.0 version. TEC: Total energyconsumption in kWh as defined in EnergyStar 8.0 version.

D E LL 2 2 M O NI T O R S - E 2 2 25 H , E 2 2 25 H S D E LL 2 2 M O NI T O R S - E 2 2 25 H , E 2 2 25 H S

FEATURE TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION

Steadfast
MODEL Dell 22 Monitor - E2225H Dell 22 Monitor - E2225HS

WEIGHT (PANEL ONLY 2.34 kg (5.16 lb) 2.37 kg (5.22 lb)

- FOR VESA MOUNT)

WEIGHT (WITH STAND 3.06 kg (6.74 lb) 3.83 kg (8.44 lb)

reliability
ASSEMBLYAND
CABLES)

WEIGHT (WITH 4.18 kg (9.21 lb) 4.95 kg (10.91 lb)

PACKAGING)
FLAT PANEL MOUNT VESA (100 mm x 100 mm) VESA (100 mm x 100 mm)
INTERFACE

BUILT-IN DEVICES Not Applicable Speaker 2 x 1W

SECURITY Security lock slot (cable lock sold separately) Security lock slot (cable lock sold separately)

COMPLIANT • ENERGY STAR 8.0 • ENERGY STAR 8.0

STANDARDS • EPEAT Gold with Climate+ • EPEAT Gold with Climate+ As the No. 1 monitor company worldwide*,
• TCO Certified and TCO Certified Edge • TCO Certified and TCO Certified Edge
•
•
RoHS Compliant
Product Safety, EMC and Environmental Datasheets
•
•
RoHS Compliant
Product Safety, EMC and Environmental Datasheets
we take pride in our unyielding commitment to
•
•
Dell Regulatory Compliance Home Page
Dell and the Environment
•
•
Dell Regulatory Compliance Home Page
Dell and the Environment quality and the utmost in customer satisfaction.
• TÜV Rheinland Eye Comfort 3-Stars • TÜV Rheinland Eye Comfort 3-Stars
• BFR/PVC reduce monitor. (The circuit boards are made from • BFR/PVC reduce monitor. (The circuit boards are made from
BFR/PVC-free laminates.) BFR/PVC-free laminates.)
• Meets NFPA 99 leakage current requirements. • Meets NFPA 99 leakage current requirements.
• Arsenic-Free glass and Mercury-Free for the panel only. • Arsenic-Free glass and Mercury-Free for the panel only.
TEMPERATURE • Operating: 0°C to 40°C (32°F to 104°F) • Operating: 0°C to 40°C (32°F to 104°F)
RANGE • Non-operating: -20°C to 60°C (-4°F to 140°F) • Non-operating: -20°C to 60°C (-4°F to 140°F)
HUMIDITY RANGE • Operating: 10% to 80% (non-condensing) • Operating: 10% to 80% (non-condensing)
• Non-Operating: 5% to 90% (non-condensing) • Non-Operating: 5% to 90% (non-condensing)

ALTITUDE • Operating: 5,000 m (16,400 ft) maximum • Operating: 5,000 m (16,404 ft) maximum
• Non-operating: 12,191 m (40,000 ft) maximum • Non-operating: 12,192 m (40,000 ft) maximum

WHAT’S INCLUDED • Monitor with stand • Monitor with stand

• Power cable • Power cable
• One DisplayPort-DisplayPort cable - 1.8 m • One HDMI cable - 1.8 m
• One VGA cable - 1.5 m (EMEA/Japan) • One VGA cable - 1.5 m (Japan)
• Quick Start guide • Quick Start guide Advanced Exchange Service
• Safety Information • Safety Information
STANDARD SERVICE 3-year Advanced Exchange Service1 and 3-year Advanced Exchange Service1 and
PLAN 3-year Limited Hardware Warranty2 3-year Limited Hardware Warranty2 These monitors come with a 3-year Advanced Exchange
OPTIONALSUPPORT Dell ProSupport for monitors for 24x7 specialized technical phone support Dell ProSupportfor monitors for24x7specializedtechnical phonesupport
3 4 3 4

Service1 so that if a replacement becomes necessary, it will

SERVICES
be shipped to you the next business day during your 3-year
Limited Hardware Warranty. 2

ProSupport

Upgrade to 24x7 specialized technical phone support with the

Dell ProSupport option.3

Optimal integration

Dell Monitors are designed to work seamlessly with our PC

and accessories. Visit the support page to find out more.

* Dell monitors are #1Worldwide for 10years!Source: IDC Worldwide Quarterly PC Monitor Tracker, Q1 2024. From 2014 to 2023. CLM-011283.
1 Advanced Exchange: Dell will send you a replacement monitor the next business day in most cases, if deemed necessary after phone/online diagnosis. Shipping times may vary by location and for monitors 55”
and above. Fee chargedfor failureto returndefectiveunit. See dell.com/servicecontracts/global.
2 For a copy of the Limited HardwareWarranty, writeto Dell USA LP, Attention: Warranties One Dell Way, Round Rock,TX 78682 or see dell.com/warranty for details.
3 Availabilityvaries, pleasevisitwww.dell.com/support for details.In some countries, hours for in-region support may vary.Supportafter local business hours may beprovided in a languageother than the local language.

Technical specifications subject to change without prior notice. Product availability varies by country. Please contact your Dell representative for more information.

1 Advanced Exchange Service: Dell will send you a replacement monitor the next business day in most cases, if deemed necessary after phone/online diagnosis. Shipping times may vary by location and for monitors 55” and above. Fee charged for failure toreturndefectiveunit. See dell.com/servicecontracts/global for details.
2 For a copy of the Limited Hardware Warranty,writeto Dell USA LP, Attention: Warranties One Dell Way, Round Rock,TX 78682 or see dell.com/warranty for details.
3 Availability varies, pleasevisit www.dell.com/support for details. © 2024 Dell Inc. or its subsidiaries. All Rights Reserved. Dell Technologies, Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective
4 In some countries,hours forin-region support may vary. Support after local business hoursmay be provided in a language other than the local language. owners.USB Type-C® and USB-C® are registeredtrademarksof USBImplementersForum. Thunderbolt and theThunderbolt logoaretrademarksofIntel Corporation in theU.S. and/or other countries.

v.1 07/2024
SPEC SHEET

75F® Central Control Unit™

A wireless building management system providing
in-depth, real-time insight and control.

⎯ Intuitive mobile pairing, configuration and settings setup

⎯ View space temperatures and equipment operating conditions
⎯ Make scheduling and setpoint adjustments
⎯ Manage alerts with severity color coding
⎯ Easy and secure magnetic alignment and spring-based locking
slider for the removeable tablet
⎯ Wall mounting compatible with industry standard vertically
installed junction boxes

888.590.8995 | [email protected] | www.75f.io CCU8inch_0724 1

75F® Central Control Unit™

What do you get when you combine a state-of-the-art control supervisor and
an applied equipment controller? Answer: the 75F Central Control Unit (CCU),
a removable wall-mounted tablet, on-site user interface for building
management, and gateway to the 75F cloud.
Customers appreciate real-time data visualization and graphs, zone and
equipment-specific performance and status. The elegant and modern design
snaps easily and securely into place with a spring-based locking slider.

OVERVIEW ADDITIONAL FEATURES

The 75F Central Control Unit (CCU) is a wall-mounted • Powerful MT8163, quad core processor with 2GB RAM
communication gateway. It connects the 75F terminal and 32 GB Flash Memory
devices via the local 900 MHz wireless mesh network and • Easy mobile pairing, configuration and settings setup.
connects to Modbus devices via RS485. The data it collects • Zones status
from these devices is then sent to the 75F cloud with a Wi-Fi • Schedule and setpoint adjustments
or LAN connection. • Alerts with severity color coding

The CCU also acts as a zoned AHU controller or

optimization extension. It aggregates all the terminal zone COMPATIBLE APPLICATIONS
data to make more informed decisions about how and • 75F Dynamic Airflow Balancing
when to activate the system AHU. • 75F Outside Air Optimization
• 75F Smart VAV with Reheat
• 75F Single Stage Equipment Controls
KEY FEATURES
• Controls single and multi-stage systems, heat pump
systems, fan coil units, air handlers, and more. INCLUDED
• Control up to 48 terminal equipment modules per Central (1) Central Control Unit
Control Unit.
• Auto changeover. (1) Wall Sensor

• Proactive, predictive control in conjunction with 75F cloud Mounting Hardware

servers; operates connected to the 75F cloud or
standalone without an internet connection.
• Strong, permanent magnets and metal locking tabs help
with feel and secure alignment.
• Intuitive Android-based user interface.

888.590.8995 | [email protected] | www.75f.io CCU8inch_0724 2

75F® Central Control Unit™

MECHANICAL
Dimensions 8.2” x 5.7” x 0.5” (208.5mm x
145mm x 11.5mm)
Mounting (2) #8 screws over standard
electrical junction box
Screen 8” display, 1200 x 800
OperatingTemp 32°F to 122°F (0°C to 50°C)
Termination Common Pogo Pin termination for
USB port and +5V DC power ELECTRICAL
Microprocessor Processor MT8163, quad core, 64-
Supply 24V AC/DC
bit, Cortex – A53, 1.3GHz
HVAC Control Up to 5 stages of heating/cooling, Consumption 5 VA (typical), 10 VA (max)
up to 5 fan stages, 0-10V Battery 3.7V, 2500mAH, Lithium Polymer
modulating output for
heating/cooling valves (no VFD),
and a dehumidifier or humidifier
COMMUNICATIONS
WALL PLATE Bluetooth BLE4.1 used for pairing devices (e.g.
Dimensions 7.96” x 5.1” x 1.02” (202.16mm x 75F Smart Node equipment control)
129.29 mm x 25.87mm)
Mesh 900 MHz IEEE 802.15.4-compliant;
I/O used for device communication on
mesh network
Inputs A. (2) 0-10V analog inputs
B. (2) 10k thermistor inputs Wired Sensor Bus to Wall Sensor
Outputs C. (4) 0-10V or 4-20V mA analog Wi-Fi Wi-Fi to connect to internet
outputs
D. (7) 24V DC/1A relays

Front view Top view Left view 25.87mm,

11.5mm,
37.58mm

20.01mm

202.16mm
129.29mm
158.48mm
145mm

Bottom view

25.87mm

202.16mm,
208.5mm
14.18mm

208.5mm 37.54mm
Right view

888.590.8995 | [email protected] | www.75f.io CCU8inch_0724 3

75F® Central Control Unit™

AI1
TH2 AI2
TH1 GND
GND 5V

GND RH GND
RC G2 AO1 AO4
Y1 W2 GND GND
Y2 W1 AO2 AO3
G1 GND

888.590.8995 | [email protected] | www.75f.io CCU8inch_0724 4

iSMA-B-MAC36NL
The iSMA-B-MAC36NL is a compact Master Key Features
Application Controller with built-in different types of
I/O and operating in Niagara Framework  Niagara 4.6, 4.7
environment. Using the specific local I/O set 16x UI,  Real-time programming
8x AO, 4x DI and 8x DO allows to use the device  2x Fast Ethernet (independent)
in different applications. The controller provides  1x RS485 (opto-isolated)
control, data logging, alarming, scheduling,
 2x USB (1x Host, 1x OTG,
integration and visualisation.
touchscreen support)
To allow IP connectivity there are 2x Fast
 16x UI, 8x AO, 4x DI and 8x DO
Ethernet ports which can operate as two
independent ports. Built-in 1x RS485 can be used  HDMI to connect external display
to expand number of I/O by connecting iSMA-B-  Built-in Web server provides graphical
MINI or iSMA-B-MIX series I/O modules or to User interface available from Web
integrate with other subsystems. browser level
There is another hardware version of the  SD card to collect real-time data, history
controller with the second RS485 port available. and alarms
The iSMA-B-MAC36NL provides rich graphical  Hardware replacement by SD Card
interface displaying on a standard Web browser
 1x RS485 or 2x RS485 (optional
or on external display connected to built-in HDMI
hardware version)
and USB port (touchscreen support).
 Different licensing models for various
application types

iSMA-B-MAC36NL iSMA-B-MAC36NL-RS
iSMA-B-MAC36NL
Specification

16x Universal Inputs (16UI) Communication

All Universal Inputs have 16-bit ADC which support the  RS485 half-duplex, opto-isolated
following types of inputs:  Baud rate from 2400 to 115200
 2x Fast Ethernet (independent)
 Temperature input supports the following types of sensors:
 2x USB (1x Host, 1x OTG)
series NTC 10K3A1, 10K4A1, Carel 10K, 20K6A1,
 HDMI type A (standard)
2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1 and Pt1000,
 Micro SD card slot
Ni1000
 Second RS485 port (option)
For sensors Pt1000 and Ni1000 use only 16-bit resolution
 Voltage input 0-10 V DC, input resistance 100 kΩ Protocols
 Current input 0-20 mA (external resistor 200 Ω required)
 Modbus TCP
 Resistive input 0-1000 kΩ
 Modbus RTU/ASCII
 Dry contact input
 BACnet IP
 BACnet MS/TP
4x Digital Inputs (4DI)  oBiX
 SNMP
 Dry contact inputs
 KNX IP
 Fast pulse counter up to 100 Hz saved on SD card
 M-Bus IP
 LON IP
8x Analog Outputs (8AO)
All Analog Outputs are equipped with 12-bit ADC. They support
Power supply
the following output types:
 24 V AC/DC
 Voltage: 0-10 V DC max. load up to 20 mA
 PWM: 0,01 Hz, 0,1 Hz, 1 Hz, 10 Hz, 100 Hz Housing
8x Digital Outputs (8DO)  Dimension: 160x111x62 mm (6.3x4.4x2.45 in)
 Construction: UL approved,
 Relay Output (NO): max. 3 A @ 230 V self-extinguishing plastic (PC/ABS)
AC and max. 3 A @ 30 V DC  DIN rail mounting DIN (DIN EN 50022 norm)
 Cooling: passive external air circulation
Platform
Environment
 Multicore Cortex-A Series ARM Processor
 1 GB DDR3 SDRAM  Operating temperature: 0°C to 50°C (32°F to 122°F)
 Removable micro-SD card – 4 GB  Storage temperature: -40°C to 85°C (-40°F to 185°F)
(2 GB system reserved/ 2 GB User storage)  Relative humidity: 5% to 95%, no condensation
 Ingress Protection Rating: IP30 – for indoor installation
MIX-IP Series
Multiprotocol I/O Modules

MODEL DESCRIPTION

I/O module with 8 universal inputs, 12

digital inputs, 6 analog outputs, 12 digital
iSMA-B-MIX38-IP
outputs, BACnet IP and Modbus TCP/IP
communication
I/O module with 5 universal inputs, 5 digital
inputs, 4 analog outputs,
iSMA-B-MIX18-IP
4 digital outputs, BACnet IP and Modbus
TCP/IP communication

APPLICATION AND USE

Multiprotocol I/O modules of the MIX-IP series are designed to create distributed control systems by extending the capabilities
of building controllers like MAC36NL, iSMA-B-J8, or AAC20 with inputs and outputs, using an IP connection and open
communication protocols, BACnet IP and Modbus TCP/IP. All the MIX series modules are equipped with the types of I/Os most
commonly used in building automation (MIX of all types of I/Os in one unit). The factory-equipped, most popular open communication
protocols, Modbus and BACnet, are selected using a DIP switch. Modules in the MIX-IP series are equipped with two Fast Ethernet
interfaces working in a switch mode, allowing for a daisy chain connection of multiple units. Additional RS485 interface has an added
functionality, the Modbus TCP/IP to Modbus RTU/ASCII gateway, enabling the connection of additional modules/devices, which
communicate as servers (slaves) on the serial bus. The Modbus gateway functionality is active both when the module is operating
in the Modbus and BACnet mode. The MIX-IP modules, communicating either in Modbus or BACnet, are always client (master) units
on the network. One major advantage of supporting the modules with open communication standards is the versatility to install
them in both new and completed installations, as part of an existing BMS. The modules are addressed using rotary switches, which
facilitates and accelerates the process of commissioning the system. Built-in mini USB allows for the initial configuration of the unit
without a power supply.

FEATURES

• Mix of all I/O types • Automatic detection of a signal type of universal inputs
• BACnet IP and Modbus TCP/IP protocols, selected with • Digital outputs 230 V AC max. 3 A allow for a direct control
a DIP switch without additional relays
• Built-in Modbus TCP/IP to Modbus RTU/ASCII gateway • Analog outputs with max. 20 mA load per channel
• 2 Fast Ethernet ports with a built-in switch (60 mA maximum total load) allow for direct control
• Digital inputs work as fast counters up to 100 Hz of relays (12 V DC) or SSR with PWM support
• Universal inputs have 16-bit resolution, which increases • LEDs indicate the status of inputs and outputs
the accuracy of measurement • Simple and fast addressing 0-99 using rotary switches
• Wide range of supported temperature sensors in Celsius • UL listed
and Fahrenheit degrees (NTC, PT1000, etc.) • BTL certified

The performances stated in this sheet can be modified without any prior notice.

www.ismacontrolli.com DBL681en | 1st Issue rev. 0 | 01/2023 page 1

TECHNICAL SPECIFICATION

DESCRIPTION MIX-IP I/O MODULES

Power supply Voltage 24 V AC/DC ± 20%

Number of inputs 8 (MIX38-IP), 5 (MIX18-IP)
Voltage measurement: 0-10 V DC
Input impedance: 100 kΩ
Voltage input
Measurement accuracy: ±0.1%
Measurement resolution: 3 mV at 12-bit and 1 mV at 16-bit
Current measurement: 0-20 mA
Required external resistor: 200 Ω
Current input
Measurement accuracy: ±1.1%
Measurement resolution: 15 µA at 12-bit and 5 µA at 16-bit
Digital input Output current ~1 mA
Universal inputs
Measurement of resistance: 0-1000 kΩ
Measurement resolution for 20 kΩ load: 20 Ω at 12-bit and 1 Ω at 16-bit
Resistance input
Measurement resolution for PT1000 and NI1000: 0.1 Ω at 16-bit
Resistance measurement method: voltage divider
Measurement with RTDS (Real Time Digital Simulator) attached
Temperature input Accuracy: ±0.1˚C
The PT1000 and NI1000 sensors use 16-bit resolution
Measurement resolution 12-bit (default), 16-bit
10 ms/channel at 12-bit
Processing time
140 ms/channel at 16-bit
Number of inputs 12 (MIX38-IP), 5 (MIX18-IP)
Digital inputs Type Dry contact or fast pulse counter
Maximum input frequency 100 Hz saved in the EEPROM memory
Number of outputs 6 (MIX38-IP), 4 (MIX18-IP)
Voltage range 0-10 V DC
Analog outputs Maximum load current 20 mA
Resolution 12-bit
Accuracy ±0.5%
Number of outputs 12 (MIX38-IP), 4 (MIX18-IP)
Maximum loads: UL compliant ratings Maximum ratings
Digital outputs
Resistive load (AC1) 3 A at 24 V AC, 3 A at 30 V DC 3 A at 230 V AC, 3 A at 30 V DC
Inductive load (AC3) 8 VA at 24 V AC, 30 W at 30 V DC 75 VA at 230 V AC, 30 W at 30 V DC
Up to 128 devices
RS485 interface
Half-duplex
Communication protocol Modbus RTU/ASCII, BACnet MS/TP
COM1
Ports Screw connector
Baud rate 2400-115200
Address 0-99 set by a rotary switch
Ethernet interface 1 Fast Ethernet with a switch mode
Communication protocol Modbus TCP/IP, BACnet IP
ETH1
Ports 2 RJ45
Baud rate 10/100 Mb/s
USB1 USB 2.0 mini USB type B
Ingress protection IP rating IP 40 for indoor installation
Storage -40°C to +85°C (-40°F to +185°F)
Temperature
Operating -10°C to +50°C (14°F to 122°F)
Humidity Relative 5 to 95% RH (without condensation)
Type Removable screw terminals
Screw connectors
Maximum cable size 2.5 mm2 (18…12 AWG)

www.ismacontrolli.com DBL681en | 1st Issue rev. 0 | 01/2023 page 2

DESCRIPTION MIX-IP I/O MODULES

Material Self-extinguishing plastic (PC/ABS)

Housing
Mounting DIN (DIN EN 50022 norm)
Module: MIX38-IP MIX18-IP
Width 160.20 mm/6.31 in 87.80 mm/3.46 in
Dimensions
Length 111.40 mm/4.39 in 111.40 mm/4.39 in
Height 62.00 mm/2.44 in 62.00 mm/2.44 in

WIRING DIAGRAMS

Power Supply Communication

Universal Inputs

Digital Inputs Digital Outputs

www.ismacontrolli.com DBL681en | 1st Issue rev. 0 | 01/2023 page 3

Analog Outputs

APPLICATION EXAMPLE

www.ismacontrolli.com DBL681en | 1st Issue rev. 0 | 01/2023 page 4

DEDICATED SOFTWARE

iSMA Configurator - configuration tool for non-programmable iSMA CONTROLLI devices

DIMENSIONS [mm]

MIX38-IP MIX18-IP

111.4
45.0

111.4
45.0
27.1 27.1
160.2 46.2 87.8 46.2
48.5 48.5
62.0 62.0

iSMA CONTROLLI S.p.A. - Via Carlo Levi 52, 16010 Sant’Olcese (GE) - Italy | [email protected]

www.ismacontrolli.com DBL681en | 1st Issue rev. 0 | 01/2023 page 5

MG-IP
Meter Gateway

MODEL DESCRIPTION

Meter Gateway with a built-in M-Bus to

M-Bus IP gateway with power supply for up
iSMA-B-MG-IP
to 60 devices and Modbus TCP/IP to
Modbus RTU gateway

APPLICATION AND USE

The MG-IP multiprotocol meter gateway is designed to simplify the integration of water, electricity, gas, and other meters installed
in the building to the BMS using an IP connection. The device allows a simultaneous integration of up to 180 meters of various
types. The M-Bus interface allows for communication and power supply of up to 60 M-Bus meters. The maximum current must not
exceed 130 mA. The RS485 interface allows for connecting of up to 128 Modbus devices. The device address and Modbus baud
rate are set using DIP switches. The built-in TCP/IP interface provides the ability to use an existing LAN infrastructure and allows for
distributed meter monitoring systems. The MG-IP device configuration is possible with the built-in web server or dedicated software,
the iSMA Configurator.

FEATURES

• M-Bus TCP/IP to M-Bus gateway • Built-in power supply for up to 60 M-Bus meters
• M-Bus UPD/IP to M-Bus gateway (up to 130 mA)
• Modbus TCP/IP to Modbus RTU/ASCII gateway • Mini USB allows for powering the device and simplifies
• Built-in configuration web server the configuration and updates
• Dedicated iSMA Configurator software

TECHNICAL SPECIFICATION

DESCRIPTION MG-IP

Power supply Voltage 24 V AC/DC ± 20%

Bus Up to 60 devices
M-Bus
Baud rate From 300 to 38400
Up to 128 devices
RS485 interface
Half-duplex
COM1 Communication protocol Modbus RTU/ASCII
Ports Screw connector
Baud rate 2400-115200
Communication protocol Modbus TCP/IP
ETH1 Baud rate 10/100 Mb/s
Port RJ45
USB1 mini USB 2.0
Ingress protection IP rating IP 40 for indoor installation
Storage -40°C to +85°C (-40°F to +185°F)
Temperature
Operating -10°C to +50°C (14°F to 122°F)
Humidity Relative 5 to 95% RH (without condensation)

The performances stated in this sheet can be modified without any prior notice.

www.ismacontrolli.com DBL641en | 1st Issue rev. 5 | 01/2023 page 1

DESCRIPTION MG-IP

Type Removable screw terminals

Screw connectors
Maximum cable size 2.5 mm2 (18…12 AWG)
Material Self-extinguishing plastic (PC/ABS)
Housing
Mounting DIN (DIN EN 50022 norm)
Width 36.30 mm/1.43 in
Dimensions Length 111.40 mm/4.38 in
Height 62.00 mm/2.44 in

WIRING DIAGRAMS

Power Supply

Communication M-Bus Network

DEDICATED SOFTWARE

iSMA Configurator - configuration tool for non-programmable iSMA CONTROLLI devices

www.ismacontrolli.com DBL641en | 1st Issue rev. 5 | 01/2023 page 2

APPLICATION EXAMPLE

DIMENSIONS [mm]
111.4
45.0

27.1
36.3 47.6
48.5
62.0

iSMA CONTROLLI S.p.A. - Via Carlo Levi 52, 16010 Sant’Olcese (GE) - Italy | [email protected]

www.ismacontrolli.com DBL641en | 1st Issue rev. 5 | 01/2023 page 3

MINT Intelligent I/Os &
Communication Processor
DI-16 16-Channel Digital Input Module
DO-16 16-Channel Digital Output
Module AI-08 8-Channel Analog Input
Module AO-08 8-Channel Analog
Output Module MINT CP -
Communication Processor MINT IO Pair

Features
Masibus' MINT I/O series is the most cost effective field interface MINT I/O
module for smart systems whether it is DAS, SCADA, PLC or DCS. 2 Modbus serial ports RS-485
The MINT I/Os are available in universal 8 channel analog Input, 8 1 RS-485 + 1 Modbus over TCP/IP port - Modnet (Optional)
channel analog output, 16 channel digital input and 16 channel 2 masters can be connected at a time in MINT with 2 RS-485
digital output.
port option
Using MINT I/Os supervisory system one can read remote Compact DIN-Rail enclosure
process values and events as well as communicate for process High-speed communication
control. These I/Os consist of powerful processors suited for high- Supports up to 15 clients on TCP/IP
speed communication and enhanced hardware features. LEDs for fault, communication and power

The MINT I/O family has Modbus RTU & Ethernet-Modnet port MINT CP
that integrates with same type of existing network in plant. No. of Modbus serial slave devices supports on RS-485 - 15 max.
Modbus over Ethernet (Modnet) - 10/100Mbps- auto-detecting
MINT DI module has unique filter time selection feature for input
noise cancellation and debounce time feature to prevent extra Serial RS-485 (Protocol supported: Modbus RTU master)
events from a single contact closure. MINT DI can also store
counter input of frequency up to 1KHz. Free mINTPLUS Configuration Software
Configuration and diagnostics
MINT CP is a communication processor which connects MINT I/Os Online excel sheet logging
and any make of serial Modbus-RTU devices to a Modnet
Ethernet network.
Applications
mINT PLUS configuration software configures all communicating Pulse totalizing - Utility accounting
parameters in MINT series. Cost effective field interface to PLC/DCS
Remote I/Os for monitoring and control
The MINT series is best suited for processes that require reliable SCADA
and efficient control with high speed connectivity for system Security systems
monitoring and information exchange up to the corporate network. Solar string monitoring
Building automation
Gas detection systems
Pipeline monitoring
Environmental monitoring
Infrastructure monitoring
Asset management

www.masibus.com [email protected]
TECHNICAL SPECIFICATIONS: MINT I/O RS485 -
ETHERNET DO-16 Module
AI-08 Module
Input Specifications Output Specifications
No. of Channels 8 Output Type Open collector (External 24V DC required)
E -200 °C to 1000 °C (Source or sink - factory set)
J -200 °C to 1200 °C Default/Pre-defined Value ON/ OFF
K -200 °C to 1350 °C Pulse Width 10msec.
Thermocouple T -200 °C to 400 °C 100mA per output
B 450 °C to 1800 °C Maximum Current (Total current for output No.1 to 8 <500mA )
R 0 °C to 1750 °C (Total current for output No.9 to 16 <500mA )
S 0 °C to 1750 °C Vce ON 1.1V max.
N -200 °C to 1300 °C Status Indication
Pt100 (3 wire) -200 °C to 850 °C
LEDs Power, module status, communication,
RTD Cu-53 -210 °C to 210 °C channel status
Input
NI-120 -80 °C to 210 °C
Types Configuration Software
Resistor Input Upto 2k Ω 0-2000
Configuration and diagnostics
0/4 -20mA mINT PLUS Software Online excel sheet logging
Current -2000 to +20000 Logging time selectable : 1 to 65535 msec.
(Ext. 50Ω resistor)
Communication
0 to +10V -2000 to +20000 RS-485 Serial Port
0 to +100mV -2000 to +20000 Protocol Modbus-RTU
Voltage -10mV to +50mV -2000 to +20000 No. of Port slave 2 (1
optional)
Communication Speed (Baud
0 to +250mV -2000 to +20000 9600, 19200, 38400, 57600,115200 bps
0 to +5V -2000 to +20000 Rate)
Accuracy 0.1% of FS Parity ODD, EVEN ,NONE
T/C & voltage/current: 50mSec./channel Data Bits 8
Scan Stop Bit 1, 2
RTD: 100mSec./channel
Rate 16 bit Default Settings 9600, 8 data bits, 1 stop bit, no parity
>60dB Connector Plug-in screw terminals, 1.5mm2 cable size
ADC Resolution >120dB Recommended Cable Shielded, twisted pair, size: 0.14mm
2

NMRR 100 ppm/°C Ethernet Port (Optional)

CMR Protocol ModbusTCP/IP (Modnet)
±2°C (0 to 55°C)
R V, mV, TC >1 No. of Port 1
Temp-Co MΩ 0.5µA Speed 10/100 Mbps (auto-detecting)
CJC Error 250µA Maximum No. of Read 1024
Input Impedance 20V DC Registers Maximum No. of 1024
Sensor Burnout Current Current/voltage inputs only Write Registers Connector RJ45 (auto-crossover)
RTD Excitation No. of Clients Supported Up to 15
Current Max Voltage DI-16 Module
Power Supply
Range Scaling

Input Specifications
No of Channels 16 Power Supply 18 - 32VDC ±10%
Counter Frequency 1 KHz max. For I/O with only RS-485 <
Power Consumption
Counter Resolution 32 bit 3W For I/O with ethernet <
Counter Mode Up/Down Isolation 5W
Pulse Width 500µSec. Supply to field: 1500VAC
RMS
Filter Time (ms) 0 to 65535 msec. Supply to RS-485: 1500VAC RMS
De-bounce Time (ms) 0 to 65535 msec. Supply to ethernet: 1000VAC
Chatter Filter Time 0 to 65535 msec. RMS Physical
Chatter Filter Counts 1 to 250 events 101(H) x 22.5(W) x 120(D)
Input Impedance 2200 Ω for I/O with only RS-485
AO-08 Module Dimensions (in mm)
Output Specifications 101(H) x 48.5(W) x 120(D)
No. of Channels for I/O with Ethernet
8
0-20mA/ 4-20mA @ 750 Ω max. Mounting DIN-Rail (35 mm)
Output (external 24V DC required) Weight 160 gms approx. – For I/O with only RS-485
Types 0-10/ 2-10 VDC @ 2K Ω min. 250 gms approx. – For I/O with Ethernet
(external 24V DC required) Enclosure Material Molded
DAC 16 bit Color ABS Black
Resolution 0.05% of FS Environmental
Accuracy
Temp-Co 100 ppm/°C Operating Temperature 0 to 55 °C
Storage Temperature -10 to 70 °C
Humidity 30 to 95 %RH non-condensing
www.masibus.com [email protected]
MINT CP MODULE
Performance Ethernet Port
Processor 32-bit CPU ARM core Protocol Modbus TCP/IP (Modnet)
Maximum No. of Read No. of Port 1
Registers 1024 Speed 10/100 Mbps (auto-detecting)
Maximum No. of Write Connector RJ45 (auto-crossover)
1024
Registers Power Supply
Maximum No. of Modbus Logic Supply Voltage 18 - 32V DC
100 Logic Supply Current 100mA max. @ 24VDC
Commands Supported
No. of Slave Devices Power Consumption < 2.5W
Supported per Serial Port No. of Modbus devices supports on serial port - 15 Supply to RS-485: 1500V AC RMS
No. of Clients Isolation Supply to Ethernet: 1000V AC RMS
Up to 15
Supported on TCP/IP Physical
Configuration Software Enclosure Material ABS plastic
Mounting DIN-Rail (35 mm)
mINT PLUS Software Configuration and diagnostics
Dimension (H x W x D) 101 mm x 22.5 mm x 120 mm
RS-485 Serial Port Communication Color Black
Protocol Modbus-RTU slave Weight 160 g
No. of Port 2 Environmental
Communication Speed Operating Temperature 0 ˚C to 55 ˚C
(Baud Rate) 9600, 19200, 38400, 57600,115200 bps
Storage Temperature -10 ˚C to 70 ˚C
Parity ODD, EVEN, NONE
Humidity 30 to 95% RH non-condensing
Data Bits 8
Stop Bit 1, 2
Default Settings 9600, 8 data bits, 1 stop bit, no. parity
Connector Plug-in screw terminals, 1.5mm2 cable size
Recommended Cable Shielded, twisted pair, size: 0.14mm2
Ordering Code
MINT I/O
Model I/O Type AI Channel Type DO Type AO Type Communication
MINT XX X X X Port 1 Port 2
AI 8 channel analog input N None N None N None SS RS-485 RS-485
DI 16 channel digital input 8 Channel 0 Sink type I Current O/P SE RS-485 Ethernet
0
AO 8 channel analog output universal 1 Source type V Voltage O/P S0 RS-485 NA
DO 16 channel digital output 1 4 Channel Fix*
2 8 Channel Fix*

Note: *Fix - Current & Voltage

Model
MINT
CP
Application

CONTROL ROOM

SCADA mINTPLUS

Ethernet Link
Serial RS232 Bus Ethernet Link

Ethernet Switch
PLC
Controller
485/RS232

RS-485 Bus
RS-

Ethernet Link
RS-485 Bus

Ethernet Link

Com2-
RS-485

MINT CP MINT I/O WITH ETHERNET PORT

MINT I/O WITH RS485

www.masibus.com [email protected]
MINT IO
PAIR MINT IO Pair / Long Distance Signals for PLC/DCS System

Reproduces your Analog/Digital inputs from remote end to central PLC/DCS end upto 1200 meters apart
MINT pair solution cost will be 1/4 of the without pair solution
RS-485 MINT IO has two separate serial ports provides redundancy
Plug n play solution works with existing infrastructure on RS-485 link to save the field wiring cost
Digital Input from

RS- RS-
485 485

Port - Communication Port- Signa

Redundancy l
1 1

Digital Input to
Reproduce
d
RS- RS-
485 2 wire cable 485
Upto 1200 meter

Port- Port-
2 2

Analog Input to
Analog Input from

RS- RS-
485 485

Port- Communication Port- Signa

Redundancy l
1 1
Reproduce
d
RS- RS-
485 2 wire cable 485
Upto 1200 meter

Port- Port-
2 2
8 Channel Analog

Input Master Card

Ordering Code

Model AO Type
MINT AI/AO-MS X
I
V

MINT - Analog Input / Output - Master/Slave (RS-485)

MINT - Digital Input / Output - Master/CSularvreen(tROS/P-485)

Model DVOolTtaygpeeO/P
MINT DI/DO-MS X
0
1

Sink Type
Source Type

Head Office: Masibus Automation And Instrumentation Pvt. Ltd.

All specifications are subject to change without notice
B-30, GIDC Electronics Estate, Sector-25, Gandhinagar-382024, Gujarat,
due to continuous improvements.
India. Tel: +91 79 23287275-77, Fax: +91 79 23287281.
Doc. Ref. MINT I/Os - MINT CP/ R5F/0423
E-mail: [email protected], Web: www.masibus.com
NTI Series Immersion type Temperature Sensor
Product Overview
 Resistance Temperature Detector is a sensor whose resistance changes as its temperature changes. The resistance
increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is
repeatable over time. An RTD is a passive device. An RTD works by using a basic principle; as the temperature of a
metal increases, so does the resistance to the flow of electricity. An electrical current is passed through the sensor,
the resistance element is used to measure the resistance of the current being passed through it. Resistance
Temperature Detector is a temperature sensor widely used for temperature measurement applications. It consists of
resistance, insulated copper wires which are made by platinum.
 A thermistor is a semiconductor type of resistor whose resistance is strongly dependent on temperature, more so
than in standard resistors. The word thermistor is a portmanteau of thermal and resistor. Thermistors are
categorized based on their conduction models. Negative-temperature-coefficient (NTC) thermistors have less
resistance at higher temperatures, while positive-temperature-coefficient (PTC) thermistors have more
resistance at higher temperatures. NTC thermistors are widely used as inrush-current limiters and
temperature sensors, while PTC thermistors are used as self-resetting over current protectors and self-
regulating heating elements. An operational temperature range of a thermistor is dependent on the probe
type and is typically between −100°C and 300°C (−148 °F and 572 °F). With NTC thermistors, resistance
decreases as temperature rises; usually due to an increase in conduction electrons bumped up by thermal
agitation from the valence band. An NTC iscommonly used as a temperature sensor, or in series with a
circuit as an inrush current limiter.

page 1/3
Features
 Low temperature range application
 Most accurate and stable, large element tolerance
 Available in both simplex and duplex versions
 Wide Temperature and operating range, Less drift

Applications

 Pharmaceuticals
 Chemical Industries
 Oil & Gas Industries
 Water Treatment Plants
 Chiller Plant
 AHU

How To Order
Model Output Total Probe Length
NTI 21 PT100 1 50mm
22 PT1000 2 100mm
23 Other 3 150mm
4 200mm
S Other

Sample ordering code: NTI.223, Immersion type Temperature Sensor with SS Thermowell

Output: Pt1000,

Total Probe Length: 150mm

Technical Parameters

 Output PT100, PT1000, Other

 Type Simplex or Thermistor

 Accuracy ±0.5°C@25°C

page 2/3
 Range -20 to 100°C

 Probe and Thermowell material SS304 (standard), SS316 optional

 Wiring 2-wire or 3-wire type

 Sheath diameter 6mm (standard), 8mm, 10mm optional

 Probe length 50mm, 100mm, 150mm, 200mm, Other

 Process connection 1/2" BSP(M) standard, other optional

 Protection IP65 (standard), IP66, IP67 optional

 Accessories SS Thermowell

 Approval CE

Contact us:
Nextech Sensors & Controls
Office no. A-609, 6th floor, Girivar Glean, Above Megma Restaurant, Near Palm Hotel, Odhav S.P. Ring Road
Circle, Odhav, Ahmedabad-382415, Gujarat, INDIA.
Email ID: [email protected]

page 3/3
NHD/NHO/NHR Series Relative Humidity & Temperature Transmitters
Features

 NHD series duct type temperature and humidity transmitter can be used for temperature and humidity measurement of
air conditioning and ventilation system air.
 NHO series outdoor type temperature and humidity transmitter can be used for temperature and humidity
measurement in outdoor environment.
 NHR series room type temperature and humidity transmitter can be used for temperature and humidity measurement in
indoor environment, Light and state of art housing, easy installation.
 Multiple output optional, the power supply and output of the transmitter have over voltage and reverse polarity
protection, high reliability and anti-interference capability.
 Multiple thermistors & RTD and current, voltage outputs selection, compatible with various automatic control systems.
 Wide measurement range, multiple ranges, fast response, high protection rate up to IP65.

Options

 Display, custom design

 Modbus RTU, RS485 protocol

Applications

 HVAC supply or extract air measuring

 Humidifier or dehumidifier controls
 Pool, greenhouse or hencoop applications
 Air quality applications, measuring and controlling humidity ratio of clean rooms

page 1/3
How To Order
Model RH Accuracy RH Output Temperature Output Options
NHD (Duct) 3 ±3%RH 1 0-10Vdc 1 0-10Vdc T Other Temp. range
NHO (Outside) 2 ±2%RH 5 4-20mA 5 4-20mA D LCD display
NHR (Room) 6 RS485 Modbus 2 PT1000 0 Other
0 Other 3 PT100
4 NTC20K
6 RS485 Modbus
7 Ni1000
8 NTC10K-II
9 NTC10K-III
0 Other

Sample ordering code: NHD.355, Duct type Temperature & RH Transmitter

RH Accuracy: ±3%RH,
RH Output: 4-20mA,
Temperature Output: 4-20mA

Technical Parameters

24VDC (4-20mA / RS485 Modbus output)

 Power supply 24VAC / 24VDC (0-10Vdc / 0-5Vdc output)

 Medium Air or non-aggressive gases

 RH sensor type Digital Polymer

Digital Temperature sensor

 Temperature sensor type
RTD or Thermistor type

4 to 20mA
 Output 0 to 10Vdc
RS485 Modbus RTU

 RH accuracy ±3%RH of f.s.

±2%RH of f.s.

±0.5°C for 4-20mA/ 0-10Vdc/ RS485 Modbus output

±0.2°C@25°C for PT100/ PT1000/ NTC20K output
 Temperature accuracy ±0.3°C@25°C for NTC10K-II/ NTC10K-III/ NTC10K-A output
±0.5°C@25°C for Ni1000 output

 RH range 0 to 100%RH

page 2/3
0 to 50°C (standard)
 Temperature range 0 to 100°C (optional)
-40 to 60°C (optional)

 Hysteresis <±1%RH

 Drift <±0.5%RH per year

 Response time <10s (25°C in slow air)

 Output load ≤500Ω (current), ≥3KΩ (voltage)

 Storage temperature -30 to 70°C

 Operating temperature -20 to 70°C

 Operating relative humidity 0 to 95%RH non-condensing

 Display LCD display (optional)

 Relay 2*SPST; 3A/30VDC; 3A/250VAC (optional)

 Housing material Fire retardant ABS+PC (UL94V0)

IP65 for NHD & NHO series

 Protection IP30 for NHR series

 Cable gland PG9

NHD & NHO series: 100mm (W) x 80mm (L) x 47mm (D)
 Enclosure dimensions NHR series: 88mm (W) x 106mm (L) x 22mm (D)

Duct type: Ø15mm diameter x 200mm (L)

 Probe dimensions Outside type: Ø15mm diameter x 90mm (L)

NHD series (duct type): 340g

 Weight NHO series (outside type): 240g
NHR series (room type): 130g

 Approval CE

Contact us:
Nextech Sensors & Controls
B-605, Shivansh Green, B/S Panchvat Residency, Opp. Jay Ranchhod Park, Vastral, Ahmedabad - 382418.
Email ID: [email protected]
page 3/3
NCFWLS Cable Float Type Water Level Switch
Product Overview

 NCFWLS is using microswitch to be contact elements. When the liquid level rises to the float place, angle offloats
place will be changed by the liquid level. When it reaches a certain angle, there will be ON or OFF contact signal
output at the switches.
 NCFWLS is a control device for automatic on/off pumps. It is also an alarm device at certain pre-determined surface
levels. It is suitable for use in non-flammable liquids at 250 volts. Inpotentially explosive atmospheres (e.g., oil tanks)
the Switch can be used in conjunction with (Ex) I-isolator switch units. Due to its large float casing, the float Switch
has a buoyancy that guarantees smooth, trouble- free operation under all conditions. The switch has a double
chamber and a final remolding finish to make it absolutely hermetic.

Features

 It can test the pressure of the liquid.

 The float switch is a switch that regulates fluid level in the tank or well etc.
 The float switch is resistant to water (sewage water)

How To Order
Model Cable Length
0 5meter
NCFWLS 1 10meter
2 Other

Sample ordering code: NCFWLS0, Cable Float Water Level Switch,

Cable length: 5meter

page 1/2
Technical Parameters

 Rated current 10(4A) / 16(6)A

 Rated voltage 12VDC-230VAC

 Cable Length 3m, 5m, 10m, 20m, 50m (As per requirement)

 Protection IP68

 Working pressure 0.1MPa

 Max. working temperature 60°C

 Electrical Contacts 1 SPDT contacts

 Frequency 50/60 Hz

 Float Material Polypropylene

 Approval CE

Contact Us:
Nextech Sensors & Controls
B-605, Shivansh Green, B/S Panchvat Residency, Opp. Jay Ranchhod Park, Vastral, Ahmedabad - 382418.
Email ID: [email protected]

page 2/2
NWDPT Series Water Differential Pressure Transmitter
Product Overview

 NWDPT series Water Differential Pressure Transmitter is assembled using an OEM piezoresistive silicon differential
pressure sensor filled with oil. The shell is made of stainless steel and has strong corrosion resistance. The two
pressure ports are threaded and can be mounted directly on the measuring pipe or connected through the pressure
pipe. NWDPT series have standard voltage and current output options, which can be easily installed and used. The
products are widely used in the measurement and control of differential pressure, liquid level and flow in process
control, aviation, aerospace, automotive, medical equipment, HVAC, etc.

Features

 316L stainless steel diaphragm structure

 Differential pressure measurement
 Easy to install
 Short circuit protection and reverse polarity protection
 Excellent shock resistance, vibration resistance and electromagnetic compatibility resistance
 Customization available

Applications

 Chillers
 Equipment support
 Scientific experiment
 Precision instrument
 Water supply and drainage
 Power plant differential pressure
 Flow

page 1/3
How To Order
Pressure Process Electrical
Model DP Range Type Output Connection Connection Options
1 0-1bar 0 DP 0 RS485 0 1/4” BSP(M) 0 DIN43650 0 No Display
3 0-3bar 1 0-10V 1 1/2” BSP(M) 1 Other 1 LED Display
6 0-6bar 2 4-20mA 2 1/4” NPT(M) 2 Other
NWDPT
10 0-10bar 3 0-5V 3 1/2” NPT(M)
16 0-16bar 4 Other 4 Other
25 0-25bar
7 Other

Sample ordering code: NWDPT602000, Water DP Transmitter

DP range: 0-6bar, Pressure type: DP,

Output: 4-20mA, Process connection: 1/4” BSP(M),

Electrical Connection: DIN43650,

Options: No display

Technical Parameters

 Pressure range As per ordering code

 Medium Gas or liquid compatible to stainless steel

 Pressure ranges 0~1bar...35bar

 Static Pressure 20Mpa (max.)

 Pressure Reference Differential Pressure

4-20mA
0-5V
 Output signal 0-10V
RS485 Modbus

 Accuracy ±0.5% of F.S.

 Long term stability <0.2% of F.S./year

 Power supply 24VDC

 Process connection As per ordering code

 Temp. drift 1.5% of F.S.

 Response time 1ms (Up to 90%FS)

page 2/3
 Service life ≥10×106 pressure cycles

 Operating temp. range -10 to 70°C

 Storage temp. range -40 to 125°C

 Insulation resistance 200MΩ / 250VDC

 Shock resistance 100g (11ms)

 Protection IP65

 Diaphragm material SS316L

 Body material SS304

 Approval CE

Drawing (Dimension: mm)

Contact Us:
Nextech Sensors & Controls
B-605, Shivansh Green, B/S Panchvat Residency, Opp. Jay Ranchhod Park, Vastral, Ahmedabad - 382418.
Email ID: [email protected]

page 3/3
VARSHA CABLES PVT LTD
An ISO 9001:2015, ISO 14001:2015,ISO 45001:2018 Certified Company
Manufacturers of Wires & Cables
Plot No.344, Hebbal Industrial Area, Mysore-570016 Ph:
0821-4282013 / 4269905 Fax: 4265515
E-mail :[email protected] / [email protected]

GUARANTEED TECHNICAL PARTICULARS

Sl. 2C X 1 Sq mm ATC, PVC Insulated, Shielded,
DESCRIPTION
No. Armoured, PVC Outer sheathed cable

1 Customer M/s. 75F Smart Innovations India Private Limited.,

2 Make V-Cables
3 Conductor
a) Size 1 Sq mm
b) Material High Conductivity Annealed Tinned Copper as per IS8130:2013
c) Shape of Conductor Stranded Round Shaped
d) Number of strands 7 Nos
e) Conductor resistance at 20 C 0
18.2 Ω/km (max)
4 Insulation
a) Material Type A PVC as per IS 5831 : 1984
b) Thickness of Insulation 0.6mm(nom)
c) Dia over Insulation 2.4mm (nom)
d) Core Identification Red and Black
e) Volume resistivity at 270C 1x10 13
Ω-cm (min)
f) Volume resistivity at 70 C
0
1x10 10
Ω-cm (min)
5 SHIELD (overall)
a) Material Polyester laminated Aluminium Mylar tape
b) Thickness 0.030mm
c) Overlap 25%
d) Coverage 100%
e) Drain wire (D/W) 0.5 sqmm Annealed Tinned copper
f) D/W resistance including shield @200C 40.1 Ω/km
6 INNERSHEATH
a) Material ST1 PVC as per IS 5831 : 1984
b) Thickness 0.3mm (min)
7 ARMOUR
a) Material Galvanized steel wire as per IS 3975 : 1999
b) Size (mm) 0.9mm
8 Outer Sheath
a) Material ST1 PVC as per IS 5831 : 1984
b) Thickness of sheath 1.24mm
c) Colour of sheath Black
d) Overall dia of cable 10mm (Approx)
V- CABLES 2C x 1 Sqmm SHIELDED ARMOURED MYSORE
9 a) Identification of cable
INDIA <Year>- MFD BY VARSHA CABLES PVT LTD
b) Sequential Marking At every One metre
1000m ± 5%
10 Std Packing length Short lengths shall not exceed 10% of the ordered qty with
minimum length being not less than 100m.

Place : Mysore
Date : 23.12.2024
VARSHA CABLES PVT LTD
An ISO 9001:2015, ISO 14001:2015,ISO 45001:2018 Certified Company
Manufacturers of Wires & Cables
Plot No.344, Hebbal Industrial Area, Mysore-570016 Ph:
0821-4282013 / 4269905 Fax: 4265515
E-mail :[email protected] / [email protected]

GUARANTEED TECHNICAL PARTICULARS

Sl. 2C X 1 Sq mm ATC, PVC Insulated,
DESCRIPTION
No. Armoured, PVC Outer sheathed cable

1 Customer M/s. 75F Smart Innovations India Private Limited.,

2 Make V-Cables
3 Conductor
a) Size 1 Sq mm
b) Material High Conductivity Annealed Tinned Copper as per IS 8130:2013
c) Shape of Conductor Stranded Round Shaped
d) No of strands 7
e) Conductor resistance at 200C 18.2 Ω/km (max)
4 Insulation
a) Material Type A PVC as per IS 5831 : 1984
b) Thickness of Insulation 0.6mm(nom)
c) Dia over Insulation 2.4mm (nom)
d) Core Identification Red and Black
e) Volume resistivity at 270C 1x10 13
Ω-cm (min)
f) Volume resistivity at 700C 1x10 10
Ω-cm (min)
5 INNERSHEATH
a) Material ST1 PVC as per IS 5831 : 1984
b) Thickness 0.3mm (min)
6 ARMOUR
a) Material Galvanized steel wire as per IS 3975 : 1999
b) Size (mm) 0.9mm
7 Outer Sheath
a) Material ST1 PVC as per IS 5831 : 1984
b) Thickness of sheath 1.24mm
c) Dia over sheath 10mm (approx)
d) Colour of sheath Black

V- CABLES 2C x 1 Sqmm Armoured MYSORE INDIA <Year>-

8 a) Identification of cable
MFD BY VARSHA CABLES PVT LTD

b) Sequential Marking At every One metre

1000m ± 5%
9 Std Packing length Short lengths shall not exceed 10% of the ordered qty with
minimum length being not less than 100m.

GUARANTEED TECHNICAL PARTICULARS

Sl. 3C X 1.5 Sq mm ATC, PVC Insulated,
PARTICULARS
No. Armoured, PVC Outer sheathed cable

1 Customer M/s. 75F Smart Innovations India Private Limited.,

2 Make V-Cables
3 Conductor
a) Size 1.5 Sq mm
b) Material High Conductivity Annealed Bare Copper as per IS 8130:2013
c) Shape of Conductor Stranded Round Shaped
d) Number of strands 7 Nos
e) Conductor resistance at 200C 12.1 Ω/km (max)
4 Insulation
a) Material Type A PVC as per IS 5831 : 1984
b) Thickness of Insulation 0.6mm(nom)
c) Dia over Insulation 2.8mm (nom)
d) Core Identification Red, Yellow, Blue
e) Volume resistivity at 270C 1x10 13
Ω-cm (min)
f) Volume resistivity at 700C 1x10 10
Ω-cm (min)
5 INNER SHEATH
a) Material ST1 PVC as per IS 5831 : 1984
b) Thickness of sheath 0.3mm (min)
6 ARMOUR
a) Material Galvanized steel wire as per IS-3975:1999
b) Size 0.9mm
7 Outer Sheath
a) Material ST1 PVC as per IS 5831 : 1984
b) Thickness of sheath 1.24mm (min)
c) Colour of sheath Black
d) Dia over sheath 11.5mm (Approx)
V- CABLES 3C x 1.5 Sqmm ARMOURED MYSORE INDIA
8 a) Identification of cable
<Year>- MFD BY VARSHA CABLES PVT LTD

b) Sequential Marking At every One metre

1000m ± 5%
9 Std Packing length Short lengths shall not exceed 10% of the ordered qty with
minimum length being not less than 100m.
Place : Mysore
Date : 23.12.2024
CAT 6 TWISTED PAIR ARMORED CABLE

Enhanced performance cable for transmission of

high speed data signals on LANs. Supports Gigabit Aluminium Wire Armoring
Ethernet (1000 baseT) standard. Operates at Conductor
bandwidth of 250 MHz. Cable will be compliant to
Cross Seperator
TIA/EIA-568-C.2 channel performance up to 70
Inner Jacket
meter
Insulation
Jacket

Conductor: Solid Bare Electrolytic Grade Copper

Nominal Conductor Resistance (DC): 93.5 Ω /1000 mtr @20°c Max
Conductor Diameter: 23 AWG
Resistance Unbalance: 5% Max
Insulation: Polyethylene
Mutual Capacitance: 5.6 nf/100 mtr Max
Rip Cord: Yes
Capacitance Unbalance
Inner Jacket: PVC - GREY Pair/Ground : 330PF/100M Max
Thickness of Propagation Delay Skew: 536 nS/100M
Inner Jacket: 0.65 to 0.70mm Worst Case cable skew: 45ns/100m
Armouring: Aluminium Wire NVP: 69%
Size of Wire: 0.80mm Impedance: 100±15% Ω
Sequential Marking: At Every Meter
Temperature Rating: -20° to + 60°c
Outer Jacket: FR PVC - Black
Thickness of
Outer Jacket: 0.85mm (Nom.) 1-2 Orange-White with Orange
Colour of Jacket : Black 7-8 Brown-White with Brown
4-5 Blue-White with Blue
Approximate OD: 9.50 mm
3-6 Green-White with Green
Filler: HDPE
CAT 6 TWISTED PAIR ARMORED CABLE

70mts CHANNEL

FREQ ATTN NEXT PSNEXT ACRF PSACRF RETURN LOSS

(MHz) (dB) max. (dB) min. (dB) min. (dB) min. (dB) min (dB)

1 2.1 65 62 63 60.3 19
4 4 63 60.5 51.2 48.2 19
8 5.7 58.2 55.6 45.2 42.2 19
10 6.3 56.6 54 43.3 40.3 19
16 8 53.2 50.6 39.2 36.2 18
20 9 51.6 49 37.2 34.2 17.5
25 10.1 50 47.3 35.3 32.3 17
31.25 11.4 48.4 45.7 33.4 30.4 16.5
62.5 16.5 43.4 40.6 27.3 24.3 14
100 21.3 39.9 37.1 23.3 20.3 12
200 31.5 34.8 31.9 17.2 14.2 9
250 35.9 33.1 30.2 15.3 12.3 8

NCB-C6UBLKR-305-A CAT623AWG TwistedPairArmoredCable

with FR PVC Outer Jacket-305M

8 8
Technical Data Sheet
Project Name & Location: - Odisha Hospital & Medical college, Phulbani

Contractor: - 75F Trade Package: - CPM

Contractor Submittal Number: - 13 Date Submitted: - 28/11/2024

Sample Material :- DDC Panel IP65

Sample No:- 13

Sample Size:-

Area of Usage:-

Technical Specifications: Model Number : DDC Panel IP65

Make : Reputed

Colour : NA

Finish :

Thickness :

Other Specs :

Comments (If any)

Sample Approved / Not Approved

Approver’s (Sign and Date)

Technical Data Sheet
Project Name & Location: - Odisha Hospital & Medical college, Phulbani

Contractor: - 75F Trade Package: - CPM

Contractor Submittal Number: - 14 Date Submitted: - 28/11/2024

Sample Material :- GI Perforated Cable Tray - 20x50x20 mm, 20x100x20 mm, 20x200x20

mm, 20x300x20 mm

Sample No:- 14

Sample Size:-

Area of Usage:-

Technical Specifications: Model Number : GI Perforated Cable Tray

Make : Reputed

Colour : NA

Finish :

Thickness :

Other Specs :

Comments (If any)

Sample Approved / Not Approved

Approver’s (Sign and Date)

C3DCI-MSFT-DDC306-IFC-GEN-ME-MHV-GE-176 - R0 Sequence of Operation-PLC Controls Chiller Plant Manager Report
No ratings yet
C3DCI-MSFT-DDC306-IFC-GEN-ME-MHV-GE-176 - R0 Sequence of Operation-PLC Controls Chiller Plant Manager Report
16 pages
Chiller Plant - BMS - Control Write-Up
100% (3)
Chiller Plant - BMS - Control Write-Up
9 pages
Chiller System BMS PDF
100% (2)
Chiller System BMS PDF
42 pages
IO Summary - CPM
No ratings yet
IO Summary - CPM
4 pages
Sequence of Operation Chiller
60% (5)
Sequence of Operation Chiller
2 pages
Uaast 3 M
No ratings yet
Uaast 3 M
84 pages
6 Sequence of Operations
100% (1)
6 Sequence of Operations
5 pages
Start-Up Checklist For 30Xv Liquid Chillers (Remove and Use For Job File)
No ratings yet
Start-Up Checklist For 30Xv Liquid Chillers (Remove and Use For Job File)
8 pages
Braemar Convair Owners Manual HSU-9-24HEK 0912 F Web
No ratings yet
Braemar Convair Owners Manual HSU-9-24HEK 0912 F Web
5 pages
Implementation of Chiller Plant Management System To Optimize The Building Primary Hvac System Energy Consumption PDF File
No ratings yet
Implementation of Chiller Plant Management System To Optimize The Building Primary Hvac System Energy Consumption PDF File
6 pages
Chiller Operation - Sop
No ratings yet
Chiller Operation - Sop
3 pages
umarshadab 11
No ratings yet
umarshadab 11
11 pages
Kabd Chiller Sequence
No ratings yet
Kabd Chiller Sequence
8 pages
RIU Maldives: Chiller Plant Control Algorithm
No ratings yet
RIU Maldives: Chiller Plant Control Algorithm
12 pages
Submittal For Al Barsha 1451 Rev0 PDF
No ratings yet
Submittal For Al Barsha 1451 Rev0 PDF
55 pages
Submittal For Al Barsha 363 Rev0 PDF
No ratings yet
Submittal For Al Barsha 363 Rev0 PDF
54 pages
Com 1314
No ratings yet
Com 1314
6 pages
5 - Chiller Plant Control
100% (5)
5 - Chiller Plant Control
55 pages
Shanghai Ifc Chiller Plant Optimization
No ratings yet
Shanghai Ifc Chiller Plant Optimization
45 pages
RC-TS-05 - Site Readyness Check List - SD Series
No ratings yet
RC-TS-05 - Site Readyness Check List - SD Series
3 pages
System Management: Chiller Plant Controller
No ratings yet
System Management: Chiller Plant Controller
3 pages
MMTC - Chiller Equipment Schedule - R0-10-08-2023
No ratings yet
MMTC - Chiller Equipment Schedule - R0-10-08-2023
8 pages
10-6 - Chilled Water System
No ratings yet
10-6 - Chilled Water System
32 pages
CPM - Operation & Maintenance Manual
No ratings yet
CPM - Operation & Maintenance Manual
65 pages
Omm Oits PDF
No ratings yet
Omm Oits PDF
69 pages
Introduction Integrated Chiller Plantroom Control System
No ratings yet
Introduction Integrated Chiller Plantroom Control System
8 pages
Greetings: HVAC Design of Commercial Buildings With TES
No ratings yet
Greetings: HVAC Design of Commercial Buildings With TES
49 pages
Chiller SOP
No ratings yet
Chiller SOP
2 pages
Broad X User Manual 0814 Revised PDF
No ratings yet
Broad X User Manual 0814 Revised PDF
64 pages
Broad X User Manual 0814 Revised PDF
100% (1)
Broad X User Manual 0814 Revised PDF
64 pages
BMS Training Note
No ratings yet
BMS Training Note
23 pages
Chiller System BMS
100% (5)
Chiller System BMS
42 pages
Tối ưu hóa bầy hạt để kiểm soát hoạt động của nhà máy làm lạnh nước tốc độ biến thiên toàn phần
No ratings yet
Tối ưu hóa bầy hạt để kiểm soát hoạt động của nhà máy làm lạnh nước tốc độ biến thiên toàn phần
34 pages
Commercial Chiller Maintenance Checklist Sample Report
No ratings yet
Commercial Chiller Maintenance Checklist Sample Report
7 pages
R4 Chiller Plant Sequence of Operation001
No ratings yet
R4 Chiller Plant Sequence of Operation001
17 pages
Dimplex Thermal Solutions (DTS), Koolant Koolers Brand Chiller
No ratings yet
Dimplex Thermal Solutions (DTS), Koolant Koolers Brand Chiller
33 pages
3 ChillerOptimizationStrategies
No ratings yet
3 ChillerOptimizationStrategies
41 pages
User's Manual-20120815
No ratings yet
User's Manual-20120815
76 pages
Chiller
No ratings yet
Chiller
25 pages
w000048 Manual
No ratings yet
w000048 Manual
35 pages
Chiller Plants
No ratings yet
Chiller Plants
2 pages
Chiller & Cooling Tower Sop Rev1
No ratings yet
Chiller & Cooling Tower Sop Rev1
34 pages
Chiller Troubleshooting Guide
No ratings yet
Chiller Troubleshooting Guide
3 pages
01) Chiller Plant Optimisation (KY)
100% (1)
01) Chiller Plant Optimisation (KY)
41 pages
1647 - Technical Passport of Equipments
No ratings yet
1647 - Technical Passport of Equipments
31 pages
Chiller Plant Manager - Mcguay
No ratings yet
Chiller Plant Manager - Mcguay
4 pages
Hvac Interview
No ratings yet
Hvac Interview
12 pages
Water Chillers 93: Compressors and Motors
No ratings yet
Water Chillers 93: Compressors and Motors
2 pages
Commisioning Check List
No ratings yet
Commisioning Check List
21 pages
B7.2KENNEDYKILTECHIDEA Presentation Miami June 2013small
No ratings yet
B7.2KENNEDYKILTECHIDEA Presentation Miami June 2013small
30 pages
Basic Data Sheet
No ratings yet
Basic Data Sheet
15 pages
Converting Primary/Secondary Chilled Water Systems To All Variable Flow
No ratings yet
Converting Primary/Secondary Chilled Water Systems To All Variable Flow
4 pages
Converting Primary/Secondary Chilled Water Systems To All Variable Flow
100% (1)
Converting Primary/Secondary Chilled Water Systems To All Variable Flow
4 pages
W193097 Manual
No ratings yet
W193097 Manual
32 pages
Manual de Chiller
No ratings yet
Manual de Chiller
46 pages
Draft - CMS Control Strategy
No ratings yet
Draft - CMS Control Strategy
17 pages
X Generation User' Manual
No ratings yet
X Generation User' Manual
76 pages
Phulbani DC 1
No ratings yet
Phulbani DC 1
1 page
Uber Bill Hyd Rgi 03 Apr
No ratings yet
Uber Bill Hyd Rgi 03 Apr
1 page
Bus Ticket TU4Z41104576
No ratings yet
Bus Ticket TU4Z41104576
3 pages
Phulbani Auto Bills
No ratings yet
Phulbani Auto Bills
3 pages
Uber Bus Stop
No ratings yet
Uber Bus Stop
1 page
Nirmal Gupta Comfort Cooling
No ratings yet
Nirmal Gupta Comfort Cooling
11 pages
F01 Climate Control
No ratings yet
F01 Climate Control
36 pages
Summary Report For Incepta Pharma 800 KVA UPS Room
No ratings yet
Summary Report For Incepta Pharma 800 KVA UPS Room
1 page
Intinus R290 40kw
No ratings yet
Intinus R290 40kw
3 pages
Introduction To PleinAir PDF
No ratings yet
Introduction To PleinAir PDF
107 pages
Full Report M&e
No ratings yet
Full Report M&e
94 pages
GE Dehumidifier Adel30lr Use and Care Manual
No ratings yet
GE Dehumidifier Adel30lr Use and Care Manual
36 pages
Chiller Head Pressure
No ratings yet
Chiller Head Pressure
3 pages
Moisture Content Air Properties Science and Study: Psychrometry
100% (1)
Moisture Content Air Properties Science and Study: Psychrometry
42 pages
Sea Water Air Conditioning: ISO9001:2015 Certified
No ratings yet
Sea Water Air Conditioning: ISO9001:2015 Certified
15 pages
FINAL - Exhaust Fan Control Systems For Laboratories
No ratings yet
FINAL - Exhaust Fan Control Systems For Laboratories
53 pages
Prezentare Tecnoclima
No ratings yet
Prezentare Tecnoclima
90 pages
Prerna Villa Hvac Drawings
No ratings yet
Prerna Villa Hvac Drawings
14 pages
Air-Conditioning System 1 (2024)
No ratings yet
Air-Conditioning System 1 (2024)
31 pages
Low GWP Refrigerants For Air Conditioning and Chiller Application
No ratings yet
Low GWP Refrigerants For Air Conditioning and Chiller Application
9 pages
Design Document Review Report - MEP PDF
100% (2)
Design Document Review Report - MEP PDF
3 pages
List of All Process Industries in Lahore PDF
No ratings yet
List of All Process Industries in Lahore PDF
1,072 pages
KTA - TB-PAC03-M07-007.Rev0 - OVERHEAD SYSTEM PID
No ratings yet
KTA - TB-PAC03-M07-007.Rev0 - OVERHEAD SYSTEM PID
2 pages
2020-02-19-TS-A One Pollar-HSB8878-485H2-127-3237-R2-233DH2
No ratings yet
2020-02-19-TS-A One Pollar-HSB8878-485H2-127-3237-R2-233DH2
1 page
LPG New
No ratings yet
LPG New
9 pages
Refrigeration and Air-Conditioning - Unit 4 - Week-3
No ratings yet
Refrigeration and Air-Conditioning - Unit 4 - Week-3
4 pages
LJF Operation Manual ACQA36-00270
No ratings yet
LJF Operation Manual ACQA36-00270
40 pages
Multi V S Brochure
No ratings yet
Multi V S Brochure
13 pages
ExHeat - HRF Flanged Industrial Immersion Heaters
No ratings yet
ExHeat - HRF Flanged Industrial Immersion Heaters
2 pages
Mep Hvac 2
No ratings yet
Mep Hvac 2
170 pages
C24-HIC-225017-ELE-LST-01 Load List For CNG Compressor Rev C
No ratings yet
C24-HIC-225017-ELE-LST-01 Load List For CNG Compressor Rev C
2 pages
Continue
No ratings yet
Continue
2 pages
Ground Source Heat Pumps Part II - Costs and Design Considerations
No ratings yet
Ground Source Heat Pumps Part II - Costs and Design Considerations
1 page
Waste Heat Boiler Plate Heat Exchangers
No ratings yet
Waste Heat Boiler Plate Heat Exchangers
8 pages