Scribd
Upload
15 views

BF-372B User Manual

The BF-372B HDMI Extender allows for high-definition signal transmission over a single CAT6 cable up to 60 meters, reducing costs associated with HDMI cables. It supports various video resolutions and audio formats while ensuring no loss of quality, and includes necessary components for installation. Users are advised to follow safety precautions during installation and operation to avoid damage or electric shock.

Uploaded by

rich8088
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

BF-372B User Manual

The BF-372B HDMI Extender allows for high-definition signal transmission over a single CAT6 cable up to 60 meters, reducing costs associated with HDMI cables. It supports various video resolutions and audio formats while ensuring no loss of quality, and includes necessary components for installation. Users are advised to follow safety precautions during installation and operation to avoid damage or electric shock.

Uploaded by

rich8088
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

HDMI EXTENDER

User Manual

BF-372B

HDMI Extender Over Single CAT6 With IR 60M


(HDMI1.3V 3D Full HD 1080P)

Bring High-Definition to your life!


HDMI Extender Over Single CAT6 With IR 60M

Thank you for purchasing our product. To ensure safety and many years' trouble-free
operation of the product, please read the manual carefully before using this product.

1.0 INTRODUCTION

The HDMI to RJ45 Extender use single CAT6 or higher level cables up to 60 meters instead of
HDMI cable to transmit high definition signal, for cutting down cost. Long distance transmission
of high definition is very difficult because HDMI cable is very expensive and infrequent. The
Extender is designed to supply for long distance transmission of high definition signal.

2.0 FEATURES

1. Signal transmission : CAT6 or higher level cables up to 60 meters instead of HDMI


cables are connected between TX and RX Extender.
2. Support HDMI1.3, HDCP 1.2 protocol compliant.
3. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
4. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
5. Support CEC.
6. Support 20~60KHz IR working.
7. Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
8. No loss of quality.
9. Installs in minutes.
10. Need DC5V/1A power supply.

3.0 PACKAGING ACCESSORIES:

When first unpacking your extender please check to see if the following items are included:
1.HDMI Transmitter ------------------------------------------------------------------------------------------ 1PCS
2.HDMI Receiver --------------------------------------------------------------------------------------------- 1PCS
3.IR-TX ---------------------------------------------------------------------------------------------------------- 1PCS
4.IR-RX ---------------------------------------------------------------------------------------------------------- 1PCS
5.Power supply ------------------------------------------------------------------------------------------------ 2PCS
6.User manual ------------------------------------------------------------------------------------------------- 1PCS

4.0 SPECIFICATION

Length of CAT6 cable between Transmitter and Receiver ----------------------------- Up to 60 meters


HDMI Input -------------------------------------------- 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input ------------------ DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output ------------------------------------------ 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output ------------------------------------------------- LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth ------------------------------------------------------------------------------------------------- 165MHz
Max baud rate ----------------------------------------------------------------------------------------------- 4.95Gbps
HDMI Extender Over Single CAT6 With IR60M

-
Input Video signal ----------------------------------------------------------------------------- 0.5~1.5Volts p-p
Output DDC signal ---------------------------------------------------------------------------- 5Volts p-p (TT1L)
Input/Output HDMI cable distance ------------------------------- ≤20m AWG26 HDMI standard cable
Max working current --------------------------------------------------------------------------------------- 800mA
Power adapter format ----------------------- Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
Operating Temperature range ------------------------------------------------------------------ (-15 to +55)
Operating Humidity range ------------------------------------------------ 5 to 90%RH (No Condensation)

5.0 PANEL DESCRIPTIONS

Before installation, please make sure all devices you wish to connect have been turned off.

HDMI EXTENDER TX PANEL

DC/5V -------------------------------------------------------------------------------------------------------- Power IN


Power ------------------------------------------------------------------------------------------------ Power Indicator
HDMI IN ------------------------------------------------------------------------------------------------ HDMI IN port
IR-TX --------------------------------------------------------------------------------------------------- IR transmitter
CAT6 ------------------------------------------------------------------------------------------------------ CAT6 OUT
EDID ----------------------------------------------------------------------------------------------- EDID copy button
HDMI EXTENDER RX PANEL

IR-RX ------------------------------------------------------------------------------------------------------- IR receiver


CAT6 ---------------------------------------------------------------------------------------------------------- CAT6 IN
DC/5V -------------------------------------------------------------------------------------------------------- Power IN
Power ------------------------------------------------------------------------------------------------- Power Indicator
HDMI OUT ------------------------------------------------------------------------------------------ HDMI OUT port
HDMI Extender Over Single CAT6 With IR60M

6.0 CONNECT AND OPERATE


Before installation, please make sure all devices you wish to connect have been turned off.

1. Connect HDMI signal source to the transmitter of HDMI extender.


2. Use CAT6 or higher level cables up to 60 meters to connect the transmitter and receiver of HDMI
Extender.
3. Connect the display equipment with HDMI connector to the receiver of HDMI extender.
4. Power on all connected devices, choose the input of the display device to its HDMI channel.

The method of EDID copy of display terminal:


Connect the HDMI input port of the HDMI extender transmitter to the TV with the power adapter,
and press the EDID button on the transmitter for 1-3 seconds to complete the EDID copy.

7.0 INSTALLATION AND PRECAUTIONS


To avoid electric shock, product damage and to protect your safety, please notice the following:

1. Please slowly plug or unplug signal cables and do not often plug, unplug, or shake them.
2. The equipment should not be placed under the sun, rain and damp or unventilated environment.
3. Liquid items should not be placed on the equipment.
4. Do not install the equipment near heat sources such as fire, power, or other amplifiers that produce
heat.
5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports.
6. Do not demolish the equipment by yourself; it should be maintained by professional maintenance
staff.

You might also like