PowerCube 1000 Hybrid Power Solution
S4875G1 Datasheet
Introduction
S4875G1 is a high efficiency DC/DC conversion module that
specialized for solar power system. It converts the power input
from PV modules into stable -48V DC power.
It tracks the highest solar power point based on the output
features of PV modules to maximize the use of solar energy.
Overview of
S4875G1
Features
⚫ Maximum output power: 4013 W
⚫ High efficiency: >98.2%, facilitating huge energy saving
⚫ High MPPT precision: 99.8%, maximize solar utilization
⚫ Modular design: share same slots with Huawei 75 A rectifier
⚫ Night standby power consumption ≤ 1.2 W, further saving energy
⚫ Adjustable voltage and current Front view of
⚫ Built-in fan: the speed of fan depends on the internal temperature S4875G1
Scenarios
⚫ Solar access scenario
⚫ Solar hybrid scenario
Note: Any datasheet issued previously is invalid when new version releases. Issue date of this version: 2020-08-29
Feature Curve
Power / %
Output Feature Curve Output Power Vs Input Voltage Curve
Power / %
100%
100%
80%
80%
60%
40%
20%
0%
-20 0 20 40 60 80
Temperature / ℃
Energy Efficiency Curve Output Power Vs Temperature curve
Dimension Drawings
Specifications
Product Type S4875G1
Dimension 105 mm(W) × 269 mm(D) × 40.8 mm(H)
Basic
Weight ≤ 2 kg
Specifications
Cooling Forced air cooling (Built-in fan)
Input Voltage 58 Vdc to 150 Vdc
Input Feature
Maximum Input Current ≤ 58A
> 97% (30% to 80% load)
Peak Efficiency
> 98.2% Max
MPPT Tracking Precision ≥ 99.8%(>100 W,static)
Output Voltage 42 Vdc to 58 Vdc, rated voltage: 53.5 Vdc/57 Vdc
Output Feature Maximum Output Power 4013 W
Ripple and Noise ≤ 200 mV （Pk-Pk, 20 M bandwidth）
Telephone Weighing
Noise ≤ 2 mV
Output Regulated Voltage
Precision ≤ 0.6%
-25 ℃ to +75 ℃ (non-derating under 55 ℃),
Operating Temperature
@ -40 ℃, S4875G1 can startup @－40 ℃ with light load(20%) after heating for 20 minutes
Storage Temperature -40 ℃ to +75 ℃
Environmental
Specifications Relative Humidity 0% to 95% (non-condensing)
≤ 4000 m (If the altitude is within the range of 2000m to 4000 m, the maximum operating
Altitude Range
temperature decreases by 1℃ as the altitude increases by 200 m)
Input Overvoltage
Protection Protection threshold: 155 Vdc
Output Over-voltage
Protection Protection threshold: 58.5 Vdc
Protection
Output Short Circuit The module is in good condition after a long-term short circuit. The module output resumes after
Protection the short circuit is rectified.
Over-temperature If over-temperature occurs, the module is shut down. When the temperature near the vent is less
Protection than 70°C, the module is enabled.
Reliability MTBF ≥500,000 hours, at an ambient temperature of 25°C
Audible Noises Specification ≤ 55 dB(A) (40°C)
Safety Certification Passes TUV, CE certifications; complies with IEC/EN62109-1
Safety/EMC/ Isolation Input & output to PE :1000 Vdc
Lightening
Complies with CISPR32, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5 ITU-TK.44, and
Protection EMC
IEC 61000-4-6.
Lightening protection Common model(input to earth) / differential model (input to input): 5KA (8/20uS)/3KA (8/20uS)
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved. HUAWEI TECHNOLOGIES CO., LTD.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Huawei Industrial Base
General Disclaimer Bantian Longgang
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, Shenzhen 518129, P.R. China
future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an Tel: +86-755-28780808
acceptance. Huawei may change the information at any time without notice.
www.huawei.com
